ABSTRACT
Nanoparticles are used as fillers to improve the properties of biopolymers, and their particle size is an important parameter. This work aims to investigate the effect of particle size of isoreticular metal-organic framework-3 (IRMOF-3) on the mechanical, physical, and release properties of sodium alginate (SA)-based composite active film. In our study, IRMOF-3 with six different particle sizes was synthesized by introducing additives. IRMOF-3 loading with carvacrol (IRMOF-3/CA nanoparticles) was incorporated into the SA matrix to prepare the composite film. The characterization and testing results of films showed that the particle size of nanoparticles affected the physical morphology and chemical structure of the film. Especially smaller nanoparticles uniformly dispersed into the SA matrix more easily, forming a denser and more stable spatial network structure with SA, which could more significantly improve the tensile strength, water vapor barrier, and hydrophobic properties of the film (P < 0.05). In addition, the CA release rate from the active film could be significantly reduced by about 33.90 % even when the smallest particle size of the IRMOF-3/CA nanoparticles was added. Therefore, when IRMOF-3/CA is used as the nano-filler to develop SA-based active film, its particle size has a potential influence on the properties of the film.
Subject(s)
Alginates , Metal-Organic Frameworks , Nanocomposites , Particle Size , Alginates/chemistry , Nanocomposites/chemistry , Metal-Organic Frameworks/chemistry , Tensile Strength , Cymenes/chemistry , Hydrophobic and Hydrophilic Interactions , SteamABSTRACT
The purpose of this study was to compare the effects of different concentrations of the amine-functionalized isoreticular metal-organic framework-3 loaded with carvacrol (IRMOF-3/CA) on the properties of sodium alginate (SA) composite films, thus determining the optimal addition amount and further preparing bioactive packaging film with antibacterial and antioxidant activities. The morphology, structure, physical properties, antioxidant and antibacterial activities of the films were characterized and analyzed. The results showed that the thermal stability and light barrier property of the films were improved by the addition of IRMOF-3/CA. When the additional concentration was 0.4 wt%, the tensile, water vapor barrier and hydrophobic properties of the films were increased by 30.13%, 9.06% and 46.43% respectively compared with those of pure SA film. Moreover, the film added with IRMOF-3/CA had sustained antioxidant and antibacterial activities, and had an apparent fresh-keeping effect on pork, suggesting its application potential in food packaging.
Subject(s)
Alginates , Antioxidants , Alginates/chemistry , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Antioxidants/chemistry , Antioxidants/pharmacology , Cymenes , Food Packaging/methods , Organometallic Compounds , PermeabilityABSTRACT
Calcium alginate based controlled release films with moderate mechanical properties were fabricated in this paper. The diffusion mechanism of these films contacting food simulating solvent (FSS) was explored in some detail. With the increase of glycerol content, the diffusion coefficient (D) values of cinnamon essential oils (CEOs) diffusing to ethanol first increased slowly (0.3-0.6 mL), then vigorously (0.6-0.9 mL), and then mildly (0.9-1.2 mL). The D values of the CEOs diffused to water are all in the order of magnitude of 10-10 cm2/s. The D values of CEOs diffused from films EG3 and EGC1 to aqueous ethanol altered enormously at a small moisture percentage (w = 0.3), then continuously varied vigorously, and at last altered mildly in the range of w = 0.3-1. All the results above indicate that, considering the FSS, the diffusion ability of molecules is jointly determined by the size and distribution of free volume in the system (polymer + diffusive substance + solvents), the intermolecular interaction, and the partition coefficient of the solvents. In addition, several pairs of D values, such as DEG and DGA, are very close to each other, indicating that different kinds of interactions between different groups may have the same effect on the diffusion ability of molecules. The correlation between D1 and D2 indicates that polymeric emulsifier chains also exist in the polymer-rich layer. All the findings and analysis could provide the theoretical basis and data support for further molecular dynamic simulation and could guide the design of controlled release food packaging for food protection.
ABSTRACT
Antioxidant packaging is an effective method to protect oxygen-sensitive food from oxidation. In order to concurrently obtain a storage stability and excellent oxygen scavenging of antioxidant film for the high moisture food, a moisture activating oxygen scavenging film was prepared by using tea polyphenols as the oxygen scavenger. The moisture activating function was achieved by introducing the ß-cyclodextrin embedding technology, and the tea polyphenols-ß-cyclodextrin inclusion complex was co-extruded with low-density polyethylene (LDPE) to improve the storage stability. The results indicate that the tea polyphenols is well embedded by ß-cyclodextrin according to the Fourier transform infrared spectra (FT-IR), and a relatively homogeneous dispersion of oxygen scavenger is observed while the oxygen scavenger content is less than 5%. The oxygen scavenging increases with the increase of oxygen scavenger from 1% to 5%, and a maximal oxygen absorption of 0.0150 mol/m2 is exhibited at oxygen scavenger content value of 5%. Then, the oxygen scavenging significantly decrease under the oxygen scavenger content of 7% and 10%. Moreover, the oxygen scavenging amount sharply increase after steeping in water or storage in extremely high humidity of RH 84% while the oxygen scavenging is restrained under RH 32-75%, indicating that the moisture activating oxygen scavenging is functioning. The oxygen scavenging is obvious restrained under low temperature of 4 °C while the oxygen scavenging is activated at 23 °C and 50 °C with similar oxygen scavenging amount. Besides, both of the tensile and heat-sealing strength deteriorative with the increase of oxygen scavenger content, while they are acceptable at oxygen scavenger content of 5%. Finally, the prepared oxygen scavenging film was used for packaging orange juice and received a good antioxidant effect. Thus, the acquired moisture activating oxygen scavenging film has a good stability under regular storage condition, and shows a potentially application for oxygen-sensitive food with high moisture content.
ABSTRACT
In order to remove the trace transition metal ions which catalyze the oxidation in food, chitosan (CS) and sodium alginate (ALG) multilayers were assembled on the polypropylene (PP) surface grafted with polyacrylic acid (PAA) to obtain PP-g-PAA/(CS/ALG)n films. The morphology of the active films was observed, and the thickness of each single assembled layer was about 7 nm. The chelation ability of the films improved with increasing number of (CS/ALG)n multilayers, and Cu2+ chelating quantity of PP-g-PAA/(CS/ALG)15.5 films was about 3.4 umol/cm2 for 72 h at pH about 5, improved by about 9.92 % as compared with PP-g-PAA films. In addition, the PP-g-PAA/(CS/ALG)n films had chelation activity for both Cu2+ and Fe2+, suggesting the potentiality in antioxidant food package application.
Subject(s)
Antioxidants/chemistry , Biocompatible Materials/chemistry , Chelating Agents/chemistry , Polyelectrolytes/chemistry , Polypropylenes/chemistry , Acrylic Resins/chemistry , Alginates/chemistry , Chitosan/chemistry , Copper/chemistry , Food Packaging , Hydrogen-Ion Concentration , Ions/chemistry , Iron/chemistry , Oxidation-Reduction , Surface PropertiesABSTRACT
In order to match the solid food oxidation during logistics and storage process under severe high temperature, a double-switch temperature-sensitive controlled release antioxidant film embedded with lyophilized nanoliposomes encapsulating rosemary essential oils (REOs) was prepared. The double switch temperature at 35.26 and 56.98 °C was achieved by development of a temperature sensitive polyurethane (TSPU) film. With biaxially oriented polyethylene terephthalate (BOPET) as a barrier layer, the intelligent complex film was prepared via coating the TSPU embedded with lyophilized nanoliposomes encapsulating REOs on BOPET. The results indicate that the REO is well encapsulated in nanoliposomes with encapsulation efficiency (EE) of 67.3%, high stability and lasting antioxidant effect during 60 days. The incorporation of lyophilized nanoliposomes containing REOs into TSPU remains the double-switch temperature-sensitive characteristic of the prepared TSPU. In agreement with porosity and WVTR results, the diffusion coefficient (D) of the antioxidant complex film sharply increases respectively at two switching temperatures, indicating that the intelligent double-switch temperature-sensitive controlled release property is functioning. Furthermore, compared with films directly added with REO, the lower Ds of films added with lyophilized nanoliposomes encapsulating REOs provides a longer-lasting antioxidant activity. Thus, the acquired controlled release antioxidant film sensitive to temperature at 39.56 and 56.00 °C can be potentially applied for protection of solid food during distribution and storage process under severe high temperatures.