Identifying sources of infiltration and inflow in sanitary sewers in a northern community: comparative assessment of selected methods.

Infiltration and inflow (I/I) into sanitary sewers causes numerous negative effects on the whole wastewater management system and ultimately, on the receiving waters. Consequently, a number of methods have been developed to analyse the performance of sewer systems with respect to I/I, including: distributed temperature sensing (DTS), closed-circuit television (CCTV) inspections, flow and conductivity measurements, automatic or grab sampling of ammonium, smoke testing, and visual inspection of manholes. Such methods were compared in an application to sanitary sewers in a small community and assessed with respect to their accuracy and ability to identify locations of sources of I/I, as well as temporal and spatial resolutions of the obtained results. Furthermore, different approaches to ammonium sampling during I/I monitoring campaigns were discussed. It was concluded that among the methods tested in this study, DTS had the highest temporal and spatial resolution, while ammonium grab sampling showed promise for initial screening of large catchments.

Contamination of stormwater by wastewater: a review of detection methods.

Even in separate sewer systems, wastewater may find its way into the receiving waters through stormwater sewers. The main reasons for this are cross-connections, illicit connections, overflows and leakages through broken sewers. Such discharges may affect receiving water quality and increase risks to public health and aquatic organisms. Detecting wastewater contamination and locating its points of ingress into storm sewer systems can be a challenging task, which should be addressed using proper methods and indicator parameters. A number of detection methods have already been proposed in this area, yet there is a lack of a general overview of such methods. This literature review summarizes and evaluates the methods used for detecting wastewater in stormwater, including those recently developed. The advantages, weaknesses and limitations of individual methods are discussed. It is concluded that while no single method can as yet produce results in a precise, fast and inexpensive way, the use of human waste specific chemical and microbiological markers, and their innovative sampling, offer the way forward. Guidance for selecting the most effective combinations of detection methods, under specific conditions, is also provided.