ABSTRACT
The perovskite compound CsPbBr3 has recently been discovered as a promising room-temperature semiconductor radiation detector, offering an inexpensive and easy-to-manufacture alternative to the current benchmark material Cd1-x Znx Te (CZT). The performance of CsPbBr3 sensors is evaluated under harsh conditions, such as high radiation doses often found in industrial settings and extreme radiation in space. Results show minimal degradation in detector performance after exposure to 1 Mrad of Co-60 gamma radiation, with no significant change to energy resolution or hole mobility and lifetime. Additionally, many of the devices are still functional after being exposed to a 10 Mrad dose over 3 days, and those that do not survive can still be refabricated into working detectors. These results suggest that the failure mode in these devices is likely related to the interface between the electrode and material and their reaction, or the electrode itself and not the material itself. Overall, the study suggests that CsPbBr3 has high potential as a reliable and efficient radiation detector in various applications, including those involving extreme fluxes and energies of gamma-ray radiation.
ABSTRACT
Solution-processed perovskites are promising for hard X-ray and gamma-ray detection, but there are limited reports on their performance under extremely intense X-rays. Here, a solution-grown all-inorganic perovskite CsPbBr3 single-crystal semiconductor detector capable of operating at ultrahigh X-ray flux of 1010 photons s-1 mm-2 is reported. High-quality solution-grown CsPbBr3 single crystals are fabricated into detectors with a Schottky diode structure of eutectic gallium indium/CsPbBr3 /Au. A high reverse-bias voltage of 1000 V (435 V mm- 1 ) can be applied with a small and stable dark current of ≈60-70 nA (≈9-10 nA mm- 2 ), which enables a high sensitivity larger than 10 000 µC Gyair -1 cm- 2 and a simultaneous low detection limit of 22 nGyair s- 1 . The CsPbBr3 semiconductor detector shows an excellent photocurrent linearity and reproducibility under 58.61 keV synchrotron X-rays with flux from 106 to 1010 photons s- 1 mm- 2 . Defect characterization by thermally stimulated current spectroscopy shows a similar low defect density of a synchrotron X-ray and a lab X-ray irradiated device. Solid-state nuclear magnetic resonance spectroscopy suggests that the excellent performance of the solution-grown CsPbBr3 single crystal may be associated with its good short-range order, comparable to the spectrometer-grade melt-grown CsPbBr3 .
ABSTRACT
Biofortification of rice with improved grain zinc (Zn) content is the most sustainable and cost-effective approach to address Zn malnutrition in Asia. Genomics-assisted breeding using precise and consistent Zn quantitative trait loci (QTLs), genes, and haplotypes can fast-track the development of Zn biofortified rice varieties. We conducted the meta-analysis of 155 Zn QTLs reported from 26 different studies. Results revealed 57 meta-QTLs with a significant reduction of 63.2% and 80% in the number and confidence interval of the Zn QTLs, respectively. Meta-quantitative trait loci (MQTLs) regions were found to be enriched with diverse metal homeostasis genes; at least 11 MQTLs were colocated with 20 known major genes involved in the production of root exudates, metal uptake, transport, partitioning, and loading into grains in rice. These genes were differentially expressed in vegetative and reproductive tissues, and a complex web of interactions were observed among them. We identified superior haplotypes and their combinations for nine candidate genes (CGs), and the frequency and allelic effects of superior haplotypes varied in different subgroups. The precise MQTLs with high phenotypic variance, CGs, and superior haplotypes identified in our study are useful for an efficient Zn biofortification of rice and to ensure Zn as an essential component of all the future rice varieties through mainstreaming of Zn breeding.
Subject(s)
Oryza , Quantitative Trait Loci , Oryza/genetics , Haplotypes , Biofortification , Zinc , Plant BreedingABSTRACT
Making semiconductor radiation detectors that work at room temperature relies heavily on the deposition and pixelation of electrodes. Electrode patterning of perovskite solar cells widely implements laser scribing techniques, which is a convenient, scalable, and inexpensive technique. However, this method has not found its application in radiation detector patterning yet, and the question whether laser scribing can achieve high-quality patterns with minimum damage to a detector crystal and low interpixel cross-talk remains largely unanswered. To prove that laser scribing is a practical method for electrode patterning on perovskite CsPbBr3 detectors, we use the material to create a variety of patterns. A very low lateral leakage current (60 nA at 10 V) and high mobility-lifetime product (9.7(3) × 10-4 cm2/V) were observed between the pixel and the guard ring in tests of single-pixel devices with a separation of 200 or 100 µm between the central electrode and the guard ring. The 122 and 136 keV photopeaks in 57Co gamma-ray spectra were very well resolved with an energy resolution of up to 6.1% at 122 keV. A further reduction in gap size to 50 µm is conceivable, but more process optimization is needed.
ABSTRACT
Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid-state reactions, leading to crystal formation of kinetically stable compounds. In this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two-dimensional Sr(Ag1-x Lix )2 Se2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag1-x Lix )2 Se2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr3 Se2 ][(Ag1-x Lix )2 Se2 ] was synthesized upon further reaction of Sr(Ag1-x Lix )2 Se2 with SrSe. Both Sr(Ag1-x Lix )2 Se2 and [Sr3 Se2 ][(Ag1-x Lix )2 Se2 ] exhibit a direct band gap, which increases with increasing Li substitution (x). Therefore, the band gap of Sr(Ag1-x Lix )2 Se2 can be precisely tuned via fine-tuning x that is controlled by only the flux ratio and temperature.
ABSTRACT
This article reports on a cryogenic setup that can be used for multifunctional experimental purposes. The temperature of the setup can be set from 10 K to 300 K. Different kinds of experiments were carried out in this experimental setup such as (1) luminescence emission, light yield, and decay time measurement under excitation of 266 nm laser and 280 nm LED sources, (2) thermoluminescence (TL) measurement under an x-ray excitation source, (3) scintillation property measurements such as light output, energy resolution, and decay time under 137Cs (662 keV γ-rays) and 241Am (5.4 MeV α) isotope sources, and (4) scintillation measurement under a 90Sr beta source through the continuous single-photon counting technique. The luminescence and scintillation properties of various molybdate and tungstate crystals such as CaMoO4, Na2Mo2O7, Pb2MoO5, CdWO4, and ZnWO4 are characterized and reported in the present work. The TL measurement of a CaMoO4 crystal is carried out from 10 K to 300 K, and various kinetic parameters such as order of kinetics, frequency factor, activation energy, and figure of merit are calculated for different TL peaks. As the temperature goes down from room to 10 K, the light yield of all studied crystals increases. Since the light yield of the crystal increases as temperature decreases toward 10 K, this experimental setup can be used for the characterization of luminescence and scintillation properties of a single crystal for rare event searches such as neutrinoless double-beta decay and dark matter.
