Tailoring the properties of composite scaffolds with a 3D-Printed lattice core and a bioactive hydrogel shell for tissue engineering.

The optimal performance of scaffolds for tissue engineering relies on a proper combination of their constituent biomaterials and on the design of their structure. In this work, composite scaffolds with a core-shell architecture are realized by grafting a gelatin-chitosan hydrogel onto a 3D-printed polylactic acid (PLA) core, aiming in particular at bone regeneration. This hydrogel was recently found to sustain osteogenic differentiation of mesenchymal stromal cells, leading to new bone tissue formation. Here, the integration with rigid PLA lattice structures provides improved mechanical support and finer control of strength and stiffness. The core is prepared by fused deposition modeling with the specific aim to study several lattice structures and thereby better tune the scaffold mechanical properties. In fact, the core architecture dictates the scaffold strength and stiffness, which are seen to match those of different types of bone tissue. For all lattice types, the hydrogel is found to penetrate throughout the entire core and to present highly interconnected pores for cell colonization. By varying the void volume fraction in the core it is possible to significantly change the bioactive shell content, as well as the mechanical properties, over a wide range of values. Looking for design guidelines, relationships between stiffness/strength and density are here outlined for scaffolds featuring different lattice parameters. Moreover, by acting on the core strut arrangement, scaffolds are reinforced along specific directions, as evaluated under compressive and bending loading conditions.

Experimental and computational analysis of a pharmaceutical-grade shape memory polymer applied to the development of gastroretentive drug delivery systems.

The present paper aims at developing an integrated experimental/computational approach towards the design of shape memory devices fabricated by hot-processing with potential for use as gastroretentive drug delivery systems (DDSs) and for personalized therapy if 4D printing is involved. The approach was tested on a plasticized poly(vinyl alcohol) (PVA) of pharmaceutical grade, with a glass transition temperature close to that of the human body (i.e., 37 °C). A comprehensive experimental analysis was conducted in order to fully characterize the PVA thermo-mechanical response as well as to provide the necessary data to calibrate and validate the numerical predictions, based on a thermo-viscoelastic constitutive model, implemented within a finite element framework. Particularly, a thorough thermal, mechanical, and shape memory characterization under different testing conditions and on different sample geometries was first performed. Then, a prototype consisting of an S-shaped device was fabricated, deformed in a temporary compact configuration and tested. Simulation results were compared with the results obtained from shape memory experiments carried out on the prototype. The proposed approach provided useful results and recommendations for the design of PVA-based shape memory DDSs.

Retentive device for intravesical drug delivery based on water-induced shape memory response of poly(vinyl alcohol): design concept and 4D printing feasibility.

The use of shape memory polymers exhibiting water-induced shape recovery at body temperature and water solubility was proposed for the development of indwelling devices for intravesical drug delivery. These could be administered via catheter in a suitable temporary shape, retained in the bladder for a programmed period of time by recovery of the original shape and eliminated with urine following dissolution/erosion. Hot melt extrusion and fused deposition modeling 3D printing were employed as the manufacturing techniques, the latter resulting in 4D printing because of the shape modifications undergone by the printed item over time. Pharmaceutical-grade poly(vinyl alcohol) was selected based on its hot-processability, availability in different molecular weights and on preliminary data showing water-induced shape memory behavior. Specimens having various original and temporary geometries as well as compositions, successfully obtained, were characterized by differential scanning calorimetry and dynamic-mechanical thermal analysis as well as for fluid uptake, mass loss, shape recovery and release behavior. The samples exhibited the desired ability to recover the original shape, consistent in kinetics with the relevant thermo-mechanical properties, and concomitant prolonged release of a tracer. Although preliminary in scope, this study indicated the viability of the proposed approach to the design of retentive intravesical delivery systems.

Radiation resistance of elastomeric O-rings in mixed neutron and gamma fields: Testing methodology and experimental results.

Materials and components employed in the presence of intense neutron and gamma fields are expected to absorb high dose levels that may induce deep modifications of their physical and mechanical properties, possibly causing loss of their function. A protocol for irradiating elastomeric materials in reactor mixed neutron and gamma fields and for testing the evolution of their main mechanical and physical properties with absorbed dose has been developed. Four elastomeric compounds used for vacuum O-rings, one fluoroelastomer polymer (FPM) based and three ethylene propylene diene monomer rubber (EPDM) based, presently available on the market have been selected for the test. One EPDM is rated as radiation resistant in gamma fields, while the other elastomers are general purpose products. Particular care has been devoted to dosimetry calculations, since absorbed dose in neutron fields, unlike pure gamma fields, is strongly dependent on the material composition and, in particular, on the hydrogen content. The products have been tested up to about 2 MGy absorbed dose. The FPM based elastomer, in spite of its lower dose absorption in fast neutron fields, features the largest variations of properties, with a dramatic increase in stiffness and brittleness. Out of the three EPDM based compounds, one shows large and rapid changes in the main mechanical properties, whereas the other two feature more stable behaviors. The performance of the EPDM rated as radiation resistant in pure gamma fields does not appear significantly better than that of the standard product. The predictive capability of the accelerated irradiation tests performed as well as the applicable concepts of threshold of radiation damage is discussed in view of the use of the examined products in the selective production of exotic species facility, now under construction at the Legnaro National Laboratories of the Italian Istituto Nazionale di Fisica Nucleare. It results that a careful account of dose rate effects and oxygen penetration in the material, both during test irradiations and in operating conditions, is needed to obtain reliable predictions.