Prognostic DNA mutation and mRNA expression analysis of perineural invasion in oral squamous cell carcinoma.

This study analyzed oral squamous cell carcinoma (OSCC) genomes and transcriptomes in relation to perineural invasion (PNI) and prognosis using Cancer Genome Atlas data and validated these results with GSE41613 data. Gene set enrichment analysis (GSEA), gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes were conducted. We identified 22 DNA mutations associated with both overall survival (OS) and PNI. Among them, TGFBR1 and RPS6KA4 mRNAs were overexpressed, while TYRO3 and GPR137 mRNAs were underexpressed in PNI patients. Among the 141 mRNA genes associated with both OS and PNI, we found overlap with PNI-related DNA mutations, including ZNF43, TEX10, TPSD1, and PSD3. In GSE41613 data, TGFBR1, RPS6KA4, TYRO3, GPR137, TEX10 and TPSD1 mRNAs were expressed differently according to the prognosis. The 22 DNA-mutated genes clustered into nervous system development, regulation of DNA-templated transcription, and transforming growth factor beta binding. GSEA analysis of mRNAs revealed upregulation of hallmarks epithelial mesenchymal transition (EMT), TNFα signaling via NF-κB, and IL2 STAT5 signaling. EMT upregulation aligned with the TGFBR1 DNA mutation, supporting its significance in PNI. These findings suggest a potential role of PNI genes in the prognosis of OSCC, providing insights for diagnosis and treatment of OSCC.

Artificial intelligence in diagnosing dens evaginatus on periapical radiography with limited data availability.

This study aimed to develop an artificial intelligence (AI) model using deep learning techniques to diagnose dens evaginatus (DE) on periapical radiography (PA) and compare its performance with endodontist evaluations. In total, 402 PA images (138 DE and 264 normal cases) were used. A pre-trained ResNet model, which had the highest AUC of 0.878, was selected due to the small number of data. The PA images were handled in both the full (F model) and cropped (C model) models. There were no significant statistical differences between the C and F model in AI, while there were in endodontists (p = 0.753 and 0.04 in AUC, respectively). The AI model exhibited superior AUC in both the F and C models compared to endodontists. Cohen's kappa demonstrated a substantial level of agreement for the AI model (0.774 in the F model and 0.684 in C) and fair agreement for specialists. The AI's judgment was also based on the coronal pulp area on full PA, as shown by the class activation map. Therefore, these findings suggest that the AI model can improve diagnostic accuracy and support clinicians in diagnosing DE on PA, improving the long-term prognosis of the tooth.

Sinus augmentation with poly(ε)caprolactone-ß tricalcium phosphate scaffolds, mesenchymal stem cells and platelet rich plasma for one-stage dental implantation in minipigs.

PURPOSE: This study evaluated the efficacy of a tube-shaped poly(ε) caprolactone - ß tricalcium phosphate (PCL-TCP) scaffold with the incorporation of human umbilical cord-derived mesenchymal stem cells (hUCMSCs) and platelet-rich plasma (PRP) for bone regeneration in the procedure of single-stage sinus augmentation and dental implantation in minipigs. METHODS: Implants were placed in the bilateral sides of the maxillary sinuses of 5 minipigs and allocated to a PCL-TCP+hUCMSCs+PRP group (n=5), a PCL-TCP+PRP group (n=5), and a PCL-TCP-only group (n=6). After 12 weeks, bone regeneration was evaluated with soft X-rays, micro-computed tomography, fluorescence microscopy, and histomorphometric analysis. RESULTS: Four implants failed (2 each in the PCL-TCP+hUCMSCs+PRP and PCL-TCP+hUCMSC groups). An analysis of the grayscale levels and bone-implant contact ratio showed significantly higher mean values in the PCL-TCP+hUCMSCs+PRP than in the PCL-TCP group (P=0.045 and P=0.016, respectively). In fluoromicroscopic images, new bone formation around the outer surfaces of the scaffolds was observed in the PCL-TCP+hUCMSCs+PRP group, suggesting a tenting effect of the specially designed scaffolds. Bone regeneration at the scaffold-implant interfaces was observed in all 3 groups. CONCLUSIONS: Using a tube-shaped, honeycombed PCL-TCP scaffold with hUCMSCs and PRP may serve to enhance bone formation and dental implants' osseointegration in the procedure of simultaneous sinus lifting and dental implantation.

Biomechanical microenvironmental stimulating effect of pulsed electromagnetic field on the regeneration of crush injured rat sciatic nerve.

This study evaluated the biomechanical microenvironmental stimulating effect of pulsed electromagnetic field (PEMF) on the regeneration of crush-injured rat sciatic nerve, when combined with bone marrow mesenchymal stem cells (BMSCs) and recombinant human nerve growth factor (rhNGF-ß), in the form of an adenoviral vector-mediated NGF. Sprague-Dawley rats were equally distributed into six groups; PBS, BMSC, NGF-Ad + BMSC, PEMF + PBS, PEMF + BMSC and PEMF + NGF-Ad + BMSC. The PBS group received PBS (volume: 10µL/rat), the BMSC group with BMSCs (1 × 106 cell/10 µL/rat) and NGF-Ad group with the rhNGF-ß Ad infected BMSCs (1 × 106 cell/10 µL/rat) immediate after right sciatic nerve crush injury. The PEMF groups were exposed to PEMF of 1mT, 50 Hz, 1 h/day. The rats were observed for 3 weeks. PEMF alone did not showed the positive effect compared with negative control group. The groups transplanted with BMSCs showed higher axonal regeneration compared with the groups without transplantation of the cells whether BMSC was infected with NGF-Ad or not and whether the animals received PEMF. PEMF + NGF-Ad + BMSC group showed the significantly highest number of axons than the other groups. Functionally, all groups showed marked improvement at 3 weeks postoperatively although the difference was not statistically significant among the groups. PEMF showed the positive effect when combined with BMSC and NGF-ad in aspect of number of axons. Therefore, combining the microenvironment stimulation methods of PEMF and conventional methods such as transplantation of stem cells and growth factor could be considered for the regeneration methods in the nerve damage.

Artificial intelligence in positioning between mandibular third molar and inferior alveolar nerve on panoramic radiography.

Determining the exact positional relationship between mandibular third molar (M3) and inferior alveolar nerve (IAN) is important for surgical extractions. Panoramic radiography is the most common dental imaging test. The purposes of this study were to develop an artificial intelligence (AI) model to determine two positional relationships (true contact and bucco-lingual position) between M3 and IAN when they were overlapped in panoramic radiographs and compare its performance with that of oral and maxillofacial surgery (OMFS) specialists. A total of 571 panoramic images of M3 from 394 patients was used for this study. Among the images, 202 were classified as true contact, 246 as intimate, 61 as IAN buccal position, and 62 as IAN lingual position. A deep convolutional neural network model with ResNet-50 architecture was trained for each task. We randomly split the dataset into 75% for training and validation and 25% for testing. Model performance was superior in bucco-lingual position determination (accuracy 0.76, precision 0.83, recall 0.67, and F1 score 0.73) to true contact position determination (accuracy 0.63, precision 0.62, recall 0.63, and F1 score 0.61). AI exhibited much higher accuracy in both position determinations compared to OMFS specialists. In determining true contact position, OMFS specialists demonstrated an accuracy of 52.68% to 69.64%, while the AI showed an accuracy of 72.32%. In determining bucco-lingual position, OMFS specialists showed an accuracy of 32.26% to 48.39%, and the AI showed an accuracy of 80.65%. Moreover, Cohen's kappa exhibited a substantial level of agreement for the AI (0.61) and poor agreements for OMFS specialists in bucco-lingual position determination. Determining the position relationship between M3 and IAN is possible using AI, especially in bucco-lingual positioning. The model could be used to support clinicians in the decision-making process for M3 treatment.

Effects of the combination of bone morphogenetic protein-2 and nano-hydroxyapatite on the osseointegration of dental implants.

OBJECTIVES: This study aimed to investigate the in vitro osteoinductivity of the combination of bone morphogenetic protein-2 (BMP-2) and nanohydroxyapatite (nHAp) and the in vivo effects of implants coated with nHAp/BMP-2. MATERIALS AND METHODS: To evaluate the in vitro efficacy of nHAp/BMP-2 on bone formation, bone marrow-derived mesenchymal stem cells (BMMSCs) were seeded onto titanium disks coated with collagen (Col), Col/nHAp, or Col/nHAp/BMP-2. Protein levels were determined by a biochemical assay and reverse transcriptase-polymerase chain reaction. Stem cell differentiation was analyzed by flow cytometry. For in vivo studies with mice, Col, Col/nHAp, and Col/nHAp/BMP-2 were injected in subcutaneous pockets. Titanium implants or implants coated with Col/nHAp/BMP-2 were placed bilaterally on rabbit tibias and evaluated for 4 weeks. RESULTS: In the in vitro study, BM-MSCs on Col/nHAp/BMP-2 showed reduced levels of CD73, CD90, and CD105 and increased levels of glycosaminoglycan, osteopontin, and alkaline phosphatase activity. After 4 weeks, the Col/nHAp/BMP-2 implant showed greater bone formation than the control (P=0.07), while no differences were observed in bone implant contact and removal torque. CONCLUSION: These results suggest that a combination of BMP-2 and an nHAp carrier would activate osseointegration on dental implant surfaces.

Long-Term Outcomes of Implants Placed in Autogenous Onlay Bone Grafts Harvested from Mandibular Ramus and Risk Analysis.

PURPOSE: This study evaluated the long-term survival and success rates of dental implants placed with autogenous onlay block bone grafts harvested from the mandibular ramus. MATERIALS AND METHODS: Patients treated with onlay bone graft from the mandibular ramus due to a severe vertical alveolar defect from 2001 to 2017 were included in this study. The marginal bone loss, success, and survival time of the implants were recorded and analyzed with clinical factors, such as time from bone graft to implant placement, type of implant prosthesis connection, history of periodontitis, and insertion depth. RESULTS: Seventy-five implants in 40 onlay bone-grafted areas of 38 patients were included, with a mean follow-up period of 102 months (range: 14 to 192 months). Two grafts were removed before implant placement. Of the 75 implants, 11 implants were lost. History of periodontitis and marginal bone loss at 6 months after implant placement were significantly associated with implant success. The receiver operating characteristic curve showed that a marginal bone loss of 0.75 mm after 6 months of implant placement was related to implant success, with a sensitivity of 72.2% and specificity of 89.6%. CONCLUSION: Implants placed with onlay bone graft from ramal bone had more frequent biologic complications, and failures may be predicted by measuring the amount of implant bone loss after 6 months of placement.

Effectiveness of Low-Level Laser Therapy with a 915 Nm Wavelength Diode Laser on the Healing of Intraoral Mucosal Wound: An Animal Study and a Double-Blind Randomized Clinical Trial.

Background and objectives: Diode laser has been the most popular low-level laser therapy (LLLT) technique in dentistry due to its good tissue penetration, lower financial costs, small size for portable application, and convenience to use. A series of recent studies with 940 nm or 980 nm lasers demonstrated that LLLT showed positive effects after third molar extraction or periodontal flap surgery. However, the effects of LLLT on intraoral mucosal wound healing after surgical incision have not yet been determined in human clinical study. Materials and Methods: The present study was performed to determine the efficacy and safety of 915 nm wavelength low-level laser therapy (LLLT) in mucosal wound healing. A total of 108 Sprague-Dawley rats were used. They were divided into three groups: Abrasive wound group, immediate LLLT once group, and daily LLLT group. As a clinical study, a total of 16 patients with split-mouth design subjected to bilateral mandibular third molar extraction were allocated into the LLLT group and placebo group. The process of LLLT was performed on postoperative days 0, 1, and 7, and parameters related to wound healing were analyzed on days 1, 7, and 14. Results: Repeated laser irradiation promoted mucosal wound healing of the rats. In the clinical study, although there were no significant statistical differences between the LLLT and placebo groups in all inflammatory parameters, the early stage mucosal healing tendency of wound dehiscence was higher in the LLLT group than in the placebo group clinically on postoperative day 1. Conclusions: The present results showed that 915 nm LLLT could be applied safely as an auxiliary therapy for mucosal wound healing.

Enhanced osteogenic differentiation of human mesenchymal stem cells on Ti surfaces with electrochemical nanopattern formation.

Titanium (Ti) and its alloys are mainly used for dental and orthopedic applications due to their excellent biocompatibility and mechanical properties. However, their intrinsic bioinertness often quotes as a common complaint for biomedical applications. Herein, we produced nanopattern Ti surfaces with 10 nm nanopores in 120 nm dimples by electrochemical nanopattern formation (ENF), and evaluated the osteogenic differentiation of human mesenchymal stem cells (hMSCs) on the nanopattern Ti surfaces. The ENF surfaces were obtained by removing the TiO2 nanotube (NT) layers prepared by an anodization process. To determine the in vitro effects of the ENF surface, cell proliferation assay, alkaline phosphatase activity assay, alizarin red staining, western blotting, and immunocytochemistry were performed. Atomic force microscopy and scanning electron microscopy analysis show that the ENF surface has an ultrafine surface roughness with highly aligned nanoporous morphology. hMSCs on ENF surfaces exhibit increased proliferation and enhanced osteogenic differentiation as compared to the ordered TiO2 nanotubular and compact TiO2 surfaces. Surface modification with the ENF process is a promising technique for fabricating osteointegrative implant materials with a highly bioactive, rigid and purified nano surfaces.

Maxillary Sinus Augmentation With Calcium Phosphate Double-Coated Anorganic Bovine Bone: Comparative Multicenter Randomized Clinical Trial With Histological and Radiographic Evaluation.

PURPOSE: The purpose of this study was to evaluate the clinical, histological and radiographic outcomes of the calcium phosphate double-coated anorganic bovine bone (InduCera; Oscotec Inc., Seongnam, Gyeonggi, Republic of Korea) compared with that of anorganic bovine bone (Bio-Oss; Geistlich Biomaterials, Wolhusen, Switzerland) in maxillary sinus augmentation, prospectively. PATIENTS AND METHODS: Twenty-eight sinuses in 25 patients (3 bilateral) with vertical alveolar bone height from 2 to 5 mm were included in this study. The maxillary sinus was augmented with InduCera or Bio-Oss, followed by a healing period of 6 months. Trephine cores were obtained for histomorphometric evaluation with the implant placement. Cone-beam computed tomography (CBCT) scans were taken at 1 week and 6 months after sinus augmentation. RESULTS: The graft sites were healed without any notable complications in both groups. In histomorphometric analysis, the area of the newly formed bone was measured as 21.37 ± 8.87% for InduCera and 23.02 ± 5.88% for Bio-Oss, with no significant differences. Radiographically, no statistically significant differences were calculated between the groups in bone height at baseline, the height of bone augmentation, the final alveolar bone height (alveolar bone height + augmented height) after 6 months in panoramic radiograph. There were also no significant differences in the shrinkage rate of the grafted area volume in CBCT. CONCLUSION: Although calcium phosphate double-coated anorganic bovine bone showed no additional effect compared with anorganic bovine bone from a histological and radiographical point of view, it could be used as the bone graft material in maxillary sinus augmentation.

Measurement of hepatitis B virus DNA in fresh versus processed dentin from chronically infected patients.

BACKGROUND: Demineralized dentin matrix (DDM) is commonly used as a bone-graft substitute. This study measured and compared human hepatitis B viruses (HBV) DNA in fresh dentin to that of dentin processed into DDM extracted during dental treatment from HBV-infected patients. The hypothesis was that the processing procedure for DDM would inactivate or eliminate HBV in the dentin matrix obtained from infected patients. METHODS: Dentin from eighteen HBV-infected patients was collected and each dentin specimen was divided into two fragments. One fragment was used before processing as fresh dentin (control group) and the other was processed into DDM (experimental group). DNA was extracted and purified from each fresh and processed dentin specimen and the HBV DNA copy number quantitated by real time polymerase chain reaction. The HBV DNA copy number in the fresh dentin specimens were compared relative to serologic test results. The second parameter was to evaluate the effectiveness of the processing procedure (defatting, demineralization, freeze-drying, and sterilization) to inactivate or eliminate HBV by comparing the DNA copy number in the processed DDM with that in the matched fresh dentin specimens. All results were analyzed using Mann-Whitney U test to compare numerical measurements between groups and differences were considered statistically significant at P-values less than 0.05. RESULTS: The presence of HBV DNA was detected in 55.56% (10/18) of the fresh dentin specimens. For the ten HBV DNA-positive fresh dentin specimens, HBV DNA was detected in two (20%) of the matched processed dentin specimens. The copy number of HBV DNA in the two positive processed dentin specimens was 1.79 and 4.03, which were statistically lower than that of the fresh dentin specimens (P = 0.0167). CONCLUSIONS: The results from this study suggested that fresh dentin may be a carrier of HBV and that the procedure used to generate DDM extensively reduced the levels of HBV DNA. Further studies are needed to evaluate the infectivity of HBV in processed dentin.

Bone-level implants placed in the anterior maxilla: an open-label, single-arm observational study.

PURPOSE: This study assessed marginal bone remodeling and soft tissue esthetics after the loading of single bone-level implants in the anterior maxilla. METHODS: An open, single-arm observational clinical trial with 3 years of follow-up was performed, including 22 implants. The patients presented with a single tooth gap in the anterior maxilla (tooth positions 14-24), with natural or restored adjacent teeth. An implant was placed at least 8 weeks post-extraction and healed submerged for 6 weeks. After the second-stage operation, a fixed provisional prosthesis was provided. The final restoration was placed 6 months after the provisional restoration. The time of the provisional crown connection was considered to be the baseline in this study. Esthetic parameters and the marginal bone level were assessed at 6, 12, 24, and 36 months. RESULTS: All implants were well integrated in the bone. A statistically significant increase was found in the mean implant stability quotient between the time of the provisional prosthesis and the time of the final prosthesis. Most implants (95.5%) revealed marginal bone resorption (<0.5 mm), and just 1 implant (4.5%) showed a change of 2.12 mm from baseline to 36 months (mean 0.07±0.48 mm), while the crestal bone level decreased significantly, from 2.34±0.93 mm at baseline to 1.70±1.10 mm at 36 months. The facial gingival margin and papilla were stable and the esthetic scores indicated high patient and dentist satisfaction. CONCLUSIONS: Platform-switching bone-level implants placed in maxillary single-tooth gaps resulted in successful osseointegration with minimal marginal bone resorption. The peri-implant soft tissue was also esthetically satisfying and stable.

Maximal strength and endurance scores of the tongue, lip, and cheek in healthy, normal Koreans.

OBJECTIVES: The purpose of this study was to establish normative data for healthy Korean adults by measuring the maximal strength and endurance scores of the tongue, lip, and cheek, and to examine correlations between these measurements. MATERIALS AND METHODS: This study included 120 subjects that were divided into three groups according to age: young (20-39 years), middle-aged (40-59 years), and older (over 60 years); and by gender. Measurements were taken using the Iowa Oral Performance Instrument (IOPI). RESULTS: The mean maximal tongue strengths were as follows: young men (46.7±10.2 kPa) and women (32.1±7.9 kPa), middle-aged men (40.9±9.3 kPa) and women (36.9±8.6 kPa), and older men (35.2±9.0 kPa) and women (34.5±6.9 kPa). The mean tongue endurance scores were: young men (28.8±12.6 seconds) and women (20.8±13.5 seconds), middle-aged men (17.0±8.5 seconds) and women (15.3±5.2 seconds), and older men (15.8±6.7 seconds) and women (17.9±8.1 seconds). The mean maximal lip strengths were: young men (11.6±3.0 kPa) and women (11.4±3.8 kPa), middle-aged men (11.4±4.2 kPa) and women (11.1±5.1 kPa), and older men (14.5±3.9 kPa) and women (11.7±2.6 kPa). The mean lip endurance scores were: young men (41.1±23.9 seconds) and women (22.4±21.7 seconds), middle-aged men (24.3±10.3 seconds) and women (30.5±13.4 seconds), and older men (24.9±11.0 seconds) and women (12.8±7.6 seconds). The mean maximal cheek strengths were: young men (24.5±4.6 kPa) and women (20.5±4.3 kPa), middle-aged men (25.2±6.4 kPa) and women (21.2±5.5 kPa), and older men (22.4±5.3 kPa) and women (18.0±4.8 kPa). The mean cheek endurance scores were: young men (47.8±24.4 seconds) and women (43.9±25.0 seconds), middle-aged men (27.3±11.3 seconds) and women (20.0±14.6 seconds), and older men (21.7±14.5 seconds) and women (17.2±11.4 seconds). CONCLUSION: The data collected in this study will provide an important database of standardized measurements for maximal strength and endurance scores of the tongue, lip and cheek in healthy, normal Koreans.

Recombinant human fibroblast growth factor-2 promotes nerve regeneration and functional recovery after mental nerve crush injury.

Several studies have shown that fibroblast growth factor-2 (FGF2) can directly affect axon regeneration after peripheral nerve damage. In this study, we performed sensory tests and histological analyses to study the effect of recombinant human FGF-2 (rhFGF2) treatment on damaged mental nerves. The mental nerves of 6-week-old male Sprague-Dawley rats were crush-injured for 1 minute and then treated with 10 or 50 µg/mL rhFGF2 or PBS in crush injury area with a mini Osmotic pump. Sensory test using von Frey filaments at 1 week revealed the presence of sensory degeneration based on decreased gap score and increased difference score. However, at 2 weeks, the gap score and difference score were significantly rebounded in the mental nerve crush group treated with 10 µg/mL rhFGF2. Interestingly, treatment with 10 µg/mL rhFGF had a more obviously positive effect on the gap score than treatment with 50 µg/mL rhFGF2. In addition, retrograde neuronal tracing with Dil revealed a significant increase in nerve regeneration in the trigeminal ganglion at 2 and 4 weeks in the rhFGF2 groups (10 µg/mL and 50 µg/mL) than in the PBS group. The 10 µg/mL rhFGF2 group also showed an obviously robust regeneration in axon density in the mental nerve at 4 weeks. Our results demonstrate that 10 µg/mL rhFGF induces mental nerve regeneration and sensory recovery after mental nerve crush injury.

Long-term follow-up of autogenous tooth bone graft blocks with dental implants.

Demineralized dentin matrix block (ABTB: Autogenous Tooth Bone Graft Block) is 3-D scaffold with same components and geometry with alveolar bone. ABTB is well incorporated and remodelled into cortico-cancellous bone with dental implant. The shape and volume were maintained with little marginal bone loss after average 44 months of follow-up.

Autogenous demineralized dentin matrix from extracted tooth for the augmentation of alveolar bone defect: a prospective randomized clinical trial in comparison with anorganic bovine bone.

OBJECTIVES: The aim of this study was to prospectively evaluate the clinical efficacy and histological outcome of the autogenous tooth graft material (AutoBT) compared to that of anorganic bovine bone (Bio-Oss® , Geistlich, Switzerland) in post-extraction alveolar bone augmentation. PATIENTS AND METHODS: A total of 33 graft sites in 24 patients were included in this study. AutoBT was used in 21 sites of 15 patients and Bio-Oss® was used in 12 sites of 9 patients for alveolar bone augmentation 2-4 weeks after dental extraction. Vertical dimension of grafted bone was measured both at the time of graft placement and at implant fixture placement after 6 months. Trephine cores were harvested for the histomorphometric evaluations during implant placement when feasible. The primary stability of implant fixture was also measured. RESULTS: Infection of graft material or graft bed was not observed and graft sites healed without any notable complications in both groups. The vertical dimensions of alveolar bone increased by 5.38 ± 2.65 mm in AutoBT group and 6.56 ± 3.54 mm in Bio-Oss® group at 6 months post-extraction. Histomorphometrically, new bone formation of AutoBT-grafted site was 31.24 ± 13.87% while that of Bio-Oss® was 35.00 ± 19.33%. The implant stability quotient (ISQ) of implants placed in AutoBT-grafted sites measured 72.80 ± 10.81 while those placed in Bio-Oss® -grafted sites measured 70.0 ± 12.86. There were no statistically significant differences between measurements of the two groups. CONCLUSION: Autogenous demineralized dentin matrix from extracted tooth grafted to extraction sockets for the augmentation of vertical dimension was as effective as augmentation using anorganic bovine bone. Both groups showed favorable wound healing, similar amount of implant stability, and histologically confirmed new bone formation. Thus, the results of this study suggest that autogenous tooth graft material is a viable option for alveolar bone augmentation following dental extraction.

Mandibular condylar-ramal reconstruction using vascularised costochondral graft based on the serratus anterior composite flap.

BACKGROUND: Nonvascularised autogenous costochondral rib grafts are the gold standard for replacement of the mandibular ramus and condyle. However, condylar defects present a difficult condition to treat when soft tissue defects are involved. Thus, we used vascularised costochondral grafts (VCGs) with a cartilaginous cap based on the serratus anterior muscle flap to reconstruct these composite defects. The purpose of this study was to evaluate the advantages and effectiveness of VCGs based on long-term observation. METHODS: We evaluated 15 patients who underwent mandibular condyle and ramus reconstruction using VCG after a mean follow-up of 75.9 months (range 46-156 months). Our 15 case of mandibular reconstruction with a serratus anterior/rib composite free flap due to congenital or acquired defects involved a total of 18 condyles (bilateral reconstruction in 3 cases and unilateral reconstruction in 12 cases). RESULTS: Our success rate with the use of the serratus anterior/rib composite free flap was 100%, and there were no cases of resorption or malunion of the graft. The mean maximum mouth opening (MMO) at the last follow-up was 31.29 ± 7.56 mm (range 15-45 mm). Although two patients exhibited excessive growth of the graft, deficient growth of the graft was also found in our paediatric patients. Four patients who developed ankylosed TMJ during the follow-up period received additional gap arthroplasty. CONCLUSION: VCG based on a serratus anterior flap was an excellent treatment modality for patients with uni-or bilateral composite defects of the ramus and condyle, in which soft tissue and hard tissue, including both bone and cartilage, were necessary.

Biologic properties of nano-hydroxyapatite: An in vivo study of calvarial defects, ectopic bone formation and bone implantation.

This study investigated the biologic properties of nano-hydroxyapatite (nHAp) using the rat calvarial defect, ectopic bone formation, and rabbit tibia implant installation models. Animals were divided into two groups: those implanted with nHAp, and negative controls (Collagen). Eight weeks after creating an 8 mm calvarial defect, bone regeneration was evaluated radiographically and histologically. To investigate ectopic bone formation, materials were injected into the right thigh muscle and were evaluated after 8 weeks. nHAp coated implant and conventional titanium implant were placed bilaterally in rabbit tibias. After 4 weeks, bone-implant contact (BIC), new bone area inside the thread, and removal torque were measured. In the calvarial defect model, radiographic and histologic analysis showed more bone formation in the nHAp Group; particularly, histologically assessed bone area (p=0.034) and microcomputed tomography assessed bone mineral density (p=0.034). In the ectopic bone formation model, calcification and expression of osteogenic biomarkers were seen in the nHAp-injected samples but in none of the controls. nHAp coated implant resulted in increased BIC, new bone area, and increased removal torque, with statistical significance for BIC (p=0.034). This study suggests that nHAp has potential as a coating material for dental implant surfaces and as a bone graft material.

Clinical outcomes of magnesium-incorporated oxidised implants: a randomised double-blind clinical trial.

OBJECTIVES: This study evaluated implant stability and clinical outcomes obtained with magnesium-incorporated oxidised implants (Mg titanate) and compared them to those blasted magnesium-incorporated oxidised implants (blasted Mg titanate). PATIENTS AND METHODS: Mg titanate was manufactured using the microarc oxidation (MAO) process. To obtain blasted Mg titanate, the MAO process was performed after blasting with TiO2 particles. The 15-month, randomised, double -blind clinical trial was conducted on 54 implants in 40 patients (Mg titanate, 27 implants in 18 subjects; blasted Mg titanate, 27 implants in 22 subjects), in whom 4.0 mm × 10 mm implants were placed to restore the unilateral loss of one or two molars in the mandible. The final prosthesis was attached 3 months postoperatively. Implant stability was measured by the implant stability quotient (ISQ) and periotest value (PTV) at the time of implant insertion, and 2, 3, and 15 months postoperatively. Marginal bone loss was evaluated at 2, 6, and 15 months postoperatively. Soft tissue analysis was performed at 15 months postoperatively. RESULTS: Both implant systems showed high stability at all time points (>71). Mean marginal bone loss was 0.71 ± 0.65 mm and 0.75 ± 0.73 after 15 months in Mg titanate and blasted Mg titanate, respectively. There were no significant differences between the two implant surfaces with respect to ISQ(P = 0.988), PTV(P = 0.935), and marginal bone loss(P = 0.807) after 15 months. CONCLUSION: The success rate after 1 year of follow-up was 100% for both magnesium-incorporated oxidised implants. There were no significant differences in the clinical outcomes between the two surfaces at 15 months follow-up.

Biomechanical evaluation of magnesium-based resorbable metallic screw system in a bilateral sagittal split ramus osteotomy model using three-dimensional finite element analysis.

PURPOSE: The aim of this study was to evaluate the stress distribution of a magnesium (Mg)-based resorbable screw system in a bilateral sagittal split ramus osteotomy (BSSO) and to compare its biomechanical stability with those of titanium (Ti)-based and polymer (IN)-based systems. MATERIALS AND METHODS: A 3-dimensional BSSO model (10-mm advancement and setback) was constructed with Mimics. Bicortical screw fixation using Ti, IN, and Mg screws was performed with 4 different geometries of fixation. With an occlusal load of 132 N on the lower first molar, the von Mises stress (VMS) distribution was calculated using ANSYS. RESULTS: The VMS distribution of Mg was more similar to that of Ti than to that of IN. In all cases, the highest VMS was concentrated on the screw at the most posterior and superior area. Stress was distributed mainly around the screw holes (cancellous bone) and the retromolar area (cortical bone). In the advancement surgery, fixation with 5 Mg screws (5A-Mg, 99.810 MPa at cortical bone) showed biomechanical stability, whereas fixation with the same number of IN screws did not (5A-IN, 109.021 MPa at cortical bone). In the setback surgery, although the maximum VMSs at cortical bone for Mg, IN, and Ti were lower than 108 MPa (yield strength of cortical bone), Mg screws showed more favorable results than IN screws because the maximum VMSs of Mg at cancellous bone were lower than those of IN. CONCLUSION: The Mg-based resorbable screw system is a promising alternative to the IN-based system.