ABSTRACT
Results concerning the controllable ablation of nano-layered thin films (NLTF) by femtosecond laser pulses are presented. Investigated samples were titanium-aluminum bilayers, deposited on a silicon substrate, with the top titanium or aluminum layer of variable thickness on the surface. Irradiation was done in ambient air with single femtosecond laser pulses under standard laboratory conditions. The samples were analyzed by complementary methods of optical and scanning electron microscopy and optical profilometry, exhibiting laser-fluence-dependent ablative removal either of the top layer or the entire bilayer or even partial ablation of the underlying silicon substrate. The removal (spallation) threshold fluences for the topmost layer are scalable versus its thickness almost irrespectively of its material, being rather selective for the Ti-coated samples and much less selective for the Al-coated samples. The removal of the entire bilayers was found to be strongly influenced by electronic properties of the underlying metallic layer, dictating the NLTF-Si adhesion, heat conduction, and capacity in the NLTFs toward the NLTF-Si interface and beyond, as well as by their thermophysical characteristics, e.g., almost twice higher melting temperature and enthalpy for Ti. As a result, precise fs-laser machining of the entire NLTFs is pronounced and selective for the samples with the fusible Al at the low-adhesion Al-Si interfaces, compared with the incomplete NLTF removal from the high-adhesion and refractory Ti-Si interfaces.
ABSTRACT
Unfortunately, in the "How to Cite as" section, the given and the family name of the author was incorrectly published, the correct name is Lladó Maldonado. S.
ABSTRACT
Bioreactors at the microliter scale offer a promising approach to accelerate bioprocess development. Advantages of such microbioreactors include a reduction in the use of expensive reagents. In this study, a chemostat operation mode of a cuvette-based microbubble column bioreactor made of polystyrene (working volume of 550 µL) was demonstrated. Aeration occurs through a nozzle (Ø ≤ 100 µm) and supports submerged whole-cell cultivation of Staphylococcus carnosus. Stationary concentrations of biomass and glucose were determined in the dilution rate regime ranging from 0.12 to 0.80 1/h with a glucose feed concentration of 1 g/L. For the first time, reaction kinetics of S. carnosus were estimated from data obtained from continuous cultivation. The maximal specific growth rate (µmax = 0.824 1/h), Monod constant (KS = 34 × 10- 3gS/L), substrate-related biomass yield coefficient (YX/S = 0.315 gCDW/gS), and maintenance coefficient (mS = 0.0035 gS/(gCDW·h)) were determined. These parameters are now available for further studies in the field of synthetic biology.
Subject(s)
Biomass , Bioreactors/microbiology , Staphylococcus/growth & developmentABSTRACT
Ion beam mixing has been used to produce a silicon carbide (SiC)-rich nanolayer for protective coating. Different C/Si/C/Si/C/Si(substrate) multilayer structures (with individual layer thicknesses falling in the range of 10-20 nm) have been irradiated by Ar+ and Xe+ ions at room temperature in the energy and fluence ranges of 40-120 keV and 1-6 × 1016 ion/cm2, respectively. The effects of ion irradiation, including the in-depth distribution of the SiC produced, was determined by Auger electron spectroscopy depth profiling. The thickness of the SiC-rich region was only some nanometers, and it could be tailored by changing the layer structure and the ion irradiation conditions. The corrosion resistance of the layers was investigated by potentiodynamic electrochemical test in 4 M KOH solution. The measured corrosion resistance of the SiC-rich layers was orders of magnitude better than that of pure silicon, and a correlation was found between the corrosion current density and the effective areal density of the SiC.
