New Approach to Synthesizing Cathode PtCo/C Catalysts for Low-Temperature Fuel Cells.

The presented study is concerned with a new multi-step method to synthesize PtCo/C materials based on composite CoxOy/C that combines the advantages of different liquid-phase synthesis methods. Based on the results of studying the materials at each stage of synthesis with the TG, XRD, TEM, SEI, TXRF, CV and LSV methods, a detailed overview of the sequential changes in catalyst composition and structure at each stage of the synthesis is presented. The PtCo/C catalyst synthesized with the multi-step method is characterized by a uniform distribution of bimetallic nanoparticles of about 3 nm in size over the surface of the support, which result in its high ESA and ORR activity. The activity study for the synthesized PtCo/C catalyst in an MEA showed better current-voltage characteristics and a higher maximum specific power compared with an MEA based on a commercial Pt/C catalyst. Therefore, the results of the presented study demonstrate high prospects for the developed approach to the multi-step synthesis of PtM/C catalysts, which may enhance the characteristics of proton-exchange membrane fuel cells (PEMFCs).

Magnetic Soft Robot for Minimally Invasive Urethral Catheter Biofilm Eradication.

Catheter-related biofilm infection remains the main problem for millions of people annually, affecting morbidity, mortality, and quality of life. Despite the recent advances in the prevention of biofilm formation, alternative methods for biofilm prevention or eradication still should be found to avoid traumatic and expensive removal or catheter replacement. Soft magnetic robots have drawn significant interest in favor of remote control, fast response, and wide space for design. In this work, we demonstrated magnetic soft robots as a minimally invasive, safe, and effective approach to eliminate biofilm from urethral catheters (20 Fr or 5.1 mm in diameter). Seven designs of the robot were fabricated (size 4.5 × 15 mm), characterized, and tested in the presence of a rotating magnetic field. As a proof-of-concept, we demonstrated the superior efficiency of biofilm removal on the model of a urethral catheter using a magnetic robot, reaching full eradication for the octagram-shaped robot (velocity 2.88 ± 0.6 mm/s) at a 15 Hz frequency and a 10 mT amplitude. These findings are helpful for the treatment of biofilm-associated catheter contamination, which allows an increase in the catheter wearing time without frequent replacement and treatment of catheter-associated infections.

Polycrystalline Transparent Al-Doped ZnO Thin Films for Photosensitivity and Optoelectronic Applications.

Thin nanocrystalline transparent Al-doped ZnO (1-10 at.% Al) films were synthesized by solid-phase pyrolysis at 700 °C. Synthesized Al-doped ZnO films were investigated by X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM, TEM). All obtained materials were crystallized into the wurtzite structure, which was confirmed by XRD. The material crystallinity decreases with the introduction of aluminum. SEM and TEM showed that the films are continuous and have a uniform distribution of nanoparticles with an average size of 15-20 nm. TEM confirmed the production of Al-doped ZnO films. The transmittance of Al-doped ZnO films in the range of 400-1000 nm is more than 94%. The introduction of 1% Al into ZnO leads to a narrowing of the band gap compared to ZnO to a minimum value of 3.26 eV and a sharp decrease in the response time to the radiation exposure with a wavelength of 400 nm. An increase in aluminum concentration leads to a slight increase in the band gap, which is associated with the Burstein-Moss effect. The minimum response time (8 s) was shown for film containing 10% Al, which is explained by the shortest average lifetime of charge carriers (4 s).

High Gas Sensitivity to Nitrogen Dioxide of Nanocomposite ZnO-SnO2 Films Activated by a Surface Electric Field.

Gas sensors based on the multi-sensor platform MSP 632, with thin nanocomposite films based on tin dioxide with a low content of zinc oxide (0.5-5 mol.%), were synthesized using a solid-phase low-temperature pyrolysis technique. The resulting gas-sensitive ZnO-SnO2 films were comprehensively studied by atomic force microscopy, Kelvin probe force microscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, scanning transmission electron microscopy, energy dispersive X-ray spectrometry, and X-ray photoelectron spectroscopy. The obtained films are up to 200 nm thick and consist of ZnO-SnO2 nanocomposites, with ZnO and SnO2 crystallite sizes of 4-30 nm. Measurements of ZnO-SnO2 films containing 0.5 mol.% ZnO showed the existence of large values of surface potential, up to 1800 mV, leading to the formation of a strong surface electric field with a strength of up to 2 × 107 V/cm. The presence of a strong surface electric field leads to the best gas-sensitive properties: the sensor's responsivity is between two and nine times higher than that of sensors based on ZnO-SnO2 films of other compositions. A study of characteristics sensitive to NO2 (0.1-50 ppm) showed that gas sensors based on the ZnO-SnO2 film demonstrated a high sensitivity to NO2 with a concentration of 0.1 ppm at an operating temperature of 200 °C.

Rational Functionalization of UiO-66 with Pd Nanoparticles: Synthesis and In Situ Fourier-Transform Infrared Monitoring.

Functionalization of metal-organic frameworks (MOFs) with noble metal nanoparticles (NPs) is a challenging task. Conventional impregnation by metals often leads to agglomerates on the surface of MOF crystals. Functional groups on linkers interact with metal precursors and promote the homogeneous distribution of NPs in the pores of MOFs, but their uncontrolled localization can block channels and thus hinder mass transport. To overcome this problem, we created nucleation centers only in the defective pores of the UiO-66 MOF via the postsynthesis exchange. First, we have introduced defects into UiO-66 using benzoic acid as a modulator. Second, the modulator was exchanged for amino-benzoic acid. As a result, amino groups have decorated mainly the defective pores and attracted the Pd precursor after impregnation. The interaction of the metal precursor with amino groups and the growth of NPs were monitored by in situ infrared spectroscopy. Three processes were distinguished: the gaseous HCl release, NH2 reactivation, and growth of extended Pd surfaces. Uniform Pd NPs were located in the pores because of the homogeneous distribution of the precursor and pore diffusion-limited nucleation rate. Our work demonstrates an alternative approach of controlled Pd incorporation into UiO-66 that is of great importance for the rational design of heterogeneous catalysts.

Influence of Electrochemical Pretreatment Conditions of PtCu/C Alloy Electrocatalyst on Its Activity.

A carbon supported PtCux/C catalyst, which demonstrates high activity in the oxygen electroreduction and methanol electrooxidation reactions in acidic media, has been obtained using a method of chemical reduction of Pt (IV) and Cu (2+) in the liquid phase. It has been found that the potential range of the preliminary voltammetric activation of the PtCux/C catalyst has a significant effect on the de-alloyed material activity in the oxygen electroreduction reaction (ORR). High-resolution transmission electron microscopy (HRTEM) demonstrates that there are differences in the structures of the as-prepared material and the materials activated in different potential ranges. In this case, there is practically no difference in the composition of the PtCux-y/C materials obtained after activation in different conditions. The main reason for the established effect, apparently, is the reorganized features of the bimetallic nanoparticles' surface structure, which depend on the value of the limiting anodic potential in the activation process. The effect of the activation conditions on the catalyst's activity in the methanol electrooxidation reaction is less pronounced.

Stability and activity of platinum nanoparticles in the oxygen electroreduction reaction: is size or uniformity of primary importance?

Platinum-carbon catalysts are widely used in the manufacturing of proton-exchange membrane fuel cells. Increasing Pt/C activity and stability is an urgent task and the optimization of their structure seems to be one of the possible solutions. In the present paper, Pt/C electrocatalysts containing small (2-2.6 nm) nanoparticles (NPs) of a similar size, uniformly distributed over the surface of a carbon support, were obtained by the original method of liquid-phase synthesis. A comparative study of the structural characteristics, catalytic activity in the oxygen electroreduction reaction (ORR), and durability of the synthesized catalysts, as well as their commercial analogs, was carried out. It was shown that the uniformity of the structural and morphological characteristics of Pt/C catalysts makes it possible to reduce the negative effect of the small size of NPs on their stability. As a result, the obtained catalysts were significantly superior to their commercial analogs regarding ORR activity, but not inferior to them in terms of stability.

Dispersal history of the golden jackal (Canis aureus moreoticus Geoffroy, 1835) in Europe and possible causes of its recent population explosion.

BACKGROUND: Data on the historical distribution of the golden jackal in Europe and its primary habitats are scarce. There are many new data on the population explosion and the rapid spread of the in Europe. However, the main factors for this expansion, the core population and its routes of dispersal, remain controversial or insufficiently studied. NEW INFORMATION: This study provides a profound analysis of the history of the jackal's (Canis aureus moreoticus Geoffroy, 1835) occurrence in Europe, the factors limiting or those triggering its expansion on the continent. The analysis shows that the timing of the species appearance in Europe still remains unclear. Historical data show that the species is a typical inhabitant of South-Eastern Europe, with some pulsations within its core area, as well as extensions to the north and west of it in favourable periods. Nowadays, the increase of the species range in Europe is the largest documented population explosion on the continent. We argue that this expansion originates from only three core populations, the Peri-Strandja area and the Dalmatian coast in the Balkans and the east parts of Western Transcaucasia in the Caucasus. This population explosion is largely due to a unique combination of factors of an anthropogenic nature.