Iron-loaded Punica granatum peel: An effective biosorbent for the excision of arsenite from water.

The occurrence of arsenic in the surroundings raises apprehension because its detrimental impacts on both human health and the ecology. Since adsorption is an effective, affordable method that can be adjusted to specific environmental circumstances, it is a sustainable solution for the removal of arsenic from the aquatic environment. Utilizing biomass that has been chemically activated may be a viable way to increase the adsorption capacity of the material, reduce arsenic pollution, and protect the environment and human health. In the proposed research, Fe(III) loaded saponified Punica granatum peel (Fe(III)-SPGP) has been synthesized to remove arsenic from aqueous solutions. FTIR and SEM analysis were utilized to carry out the characterization of the biosorbents. Batch experiments were carried out by altering several factors including pH and contact time, in addition to initial concentration and desorption. The most effective pH for As(III) adsorption using Fe(III)-SPGP was discovered to be 9.0. After determining that a pseudo-second-order kinetic model was the one that provided the greatest fit for the results of the experiment, the model developed by Langmuir was applied. It was discovered that the maximum adsorption of As(III) that could be adsorbed by Fe(III)-SPGP was 63.29 mg/g. The spent biosorbent may easily be reused again in subsequent applications. Based on these findings, Fe(III)-SPGP shows promise as a cheap effective sorbent for excising contaminants of As(III).

Efficient biosorption of hexavalent chromium from water by modified arecanut leaf sheath.

In this work, the excision of hexavalent chromium (Cr(VI)) was studied from an aqueous solution using the chemically modified arecanut leaf sheath (CALS) as a novel bio-adsorbent. The as-prepared adsorbent was characterized by using instrumental methods including Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The effect of several factors, including solution pH, contact time, and sorbent dosages were examined to identify the optimum condition for the sorption ability. The optimal pH of Cr(VI) biosorption was 2.0, and equilibrium was reached in 150 min. Adsorption was shown to be pseudo-second-order in kinetic investigations, and the Langmuir isotherm with maximal adsorption efficiency was determined as 109.89 mg/g. The spent biosorbent can be easily regenerated and reused. For the biosorption of oxyanions of chromium, both electrostatic attraction and ligand exchange mechanism play critical roles. From the results, the CALS appears to be a potential low-cost effective sorbent to remove Cr (VI) from water.