Wrinkling of atomic planes in ultrathin Au nanowires.

A detailed understanding of structure and stability of nanowires is critical for applications. Atomic resolution imaging of ultrathin single crystalline Au nanowires using aberration-corrected microscopy reveals an intriguing relaxation whereby the atoms in the close-packed atomic planes normal to the growth direction are displaced in the axial direction leading to wrinkling of the (111) atomic plane normal to the wire axis. First-principles calculations of the structure of such nanowires confirm this wrinkling phenomenon, whereby the close-packed planes relax to form saddle-like surfaces. Molecular dynamics studies of wires with varying diameters and different bounding surfaces point to the key role of surface stress on the relaxation process. Using continuum mechanics arguments, we show that the wrinkling arises due to anisotropy in the surface stresses and in the elastic response, along with the divergence of surface-induced bulk stress near the edges of a faceted structure. The observations provide new understanding on the equilibrium structure of nanoscale systems and could have important implications for applications in sensing and actuation.

Polymer nanocomposite nanomechanical cantilever sensors: material characterization, device development and application in explosive vapour detection.

This paper reports an optimized and highly sensitive piezoresistive SU-8 nanocomposite microcantilever sensor and its application for detection of explosives in vapour phase. The optimization has been in improving its electrical, mechanical and transduction characteristics. We have achieved a better dispersion of carbon black (CB) in the SU-8/CB nanocomposite piezoresistor and arrived at an optimal range of 8-9 vol% CB concentration by performing a systematic mechanical and electrical characterization of polymer nanocomposites. Mechanical characterization of SU-8/CB nanocomposite thin films was performed using the nanoindentation technique with an appropriate substrate effect analysis. Piezoresistive microcantilevers having an optimum carbon black concentration were fabricated using a design aimed at surface stress measurements with reduced fabrication process complexity. The optimal range of 8-9 vol% CB concentration has resulted in an improved sensitivity, low device variability and low noise level. The resonant frequency and spring constant of the microcantilever were found to be 22 kHz and 0.4 N m(-1) respectively. The devices exhibited a surface stress sensitivity of 7.6 ppm (mN m(-1))(-1) and the noise characterization results support their suitability for biochemical sensing applications. This paper also reports the ability of the sensor in detecting TNT vapour concentration down to less than six parts per billion with a sensitivity of 1 mV/ppb.

Probing thermal expansion of graphene and modal dispersion at low-temperature using graphene nanoelectromechanical systems resonators.

We use suspended graphene electromechanical resonators to study the variation of resonant frequency as a function of temperature. Measuring the change in frequency resulting from a change in tension, from 300 to 30 K, allows us to extract information about the thermal expansion of monolayer graphene as a function of temperature, which is critical for strain engineering applications. We find that thermal expansion of graphene is negative for all temperatures between 300 and 30 K. We also study the dispersion, the variation of resonant frequency with DC gate voltage, of the electromechanical modes and find considerable tunability of resonant frequency, desirable for applications like mass sensing and RF signal processing at room temperature. With a lowering of temperature, we find that the positively dispersing electromechanical modes evolve into negatively dispersing ones. We quantitatively explain this crossover and discuss optimal electromechanical properties that are desirable for temperature-compensated sensors.

Chemical methodologies for preparation of micron and nanometer scale ferrites--a mini review of patents.

Ferrites, with wide range of chemical compositions, have been studied extensively over the years as they have a plethora of applications such as magnetic read/write heads, transformer cores, antennas, microwave absorbers, deflecting yoke, high frequency transformers, catalysis, pigments etc. Particles of submicron size have attracted the attention of scientists and technologists in different fields because they exhibit many unique physical properties as compared to those of bulk materials and are in great demand. Traditional high temperature solid-state method for preparation of ferrites is associated with several limitations. The quest for synthesis of ultrafine ferrite materials has led to the development of various preparative methods. Several patents disclose different wet chemical techniques namely sol-gel, coprecipitation, hydrothermal, combustion, spray pyrolysis etc for preparation of variety of ferrites for wide range of applications. In this mini-review, several patented chemical methods have been discussed critically with specific examples along with the effect of synthetic routes on particle size formation. Applications of ferrite powders with different compositions prepared by the above mentioned patented methods have also been discussed in this review.

Magnetotransport in epitaxial films of the degenerate semiconductor Zn(1-x)Co(x)O.

Magnetotransport measurements are performed over a broad range of temperature (T) and magnetic field (H) on highly degenerate n-type Zn(1-x)Co(x)O [Formula: see text] epitaxial films. The cobalt-free samples are characterized by a metallic resistivity ρ(T) down to 2 K, a negative and predominantly isotropic magnetoresistance (MR) and optical transmission above 85% in the visible range of the electromagnetic spectrum. X-ray diffraction measurements show that while for [Formula: see text], all cobalt atoms occupy the tetrahedral sites of the wurtzite structure of ZnO, a phase separation into CoO is seen for x>0.2. In the solution phase, we do not observe any signatures of a spontaneous ordering of the cobalt spins despite a large concentration of mobile electrons (>10(20) cm(-3)). The absence of anomalous Hall resistance is consistent with this observation. The carrier concentration (n) over the entire range of x remains above the Mott limit for the insulator-to-metal transition in a doped semiconductor. However, while the Co-free samples are metallic (T>2 K), we see a resistivity (ρ) minimum followed by lnT divergence of ρ(T) at low temperatures with increasing x. The magnetoresistance of these samples is negative and predominantly isotropic. Moreover, the MR tends to follow a logH behaviour at high fields. These observations, including the Kondo-like minimum in the resistivity, suggest s-d exchange dominated transport in these dilute magnetic semiconductors.