High-Performance WSe2 Top-Gate Devices with Strong Spacer Doping.

Because of the lack of contact and spacer doping techniques for two-dimensional (2D) transistors, most high-performance 2D devices have been produced with nontypical structures that contain electrical gating in the contact regions. In the present study, we used chloroauric acid (HAuCl4) as a strong p-dopant for WSe2 monolayers used in transistors. The HAuCl4-doped devices exhibited a record-low contact resistance of 0.7 kΩ·µm under a doping concentration of 1.76 × 1013 cm-2. In addition, an extrinsic carrier diffusion phenomenon was discovered in the HAuCl4-WSe2 system. With a suitably designed spacer length for doping, a normally off, high-performance underlap top-gate device can be produced without the application of additional gating in the contact and spacer regions.

High-Performance Two-Dimensional Electronics with a Noncontact Remote Doping Method.

Because of the intrinsic low carrier density of monolayer two-dimensional (2D) materials, doping is crucial for the performance of underlap top-gated 2D devices. However, wet etching of a high-k (dielectric constant) dielectric layer is difficult to implement without causing performance deterioration on the devices; therefore, finding a suitable spacer doping technique for 2D devices is indispensable. In this study, we developed a remote doping (RD) method in which defective SiOx can remotely dope the underlying high-k capped 2D regions without directly contacting these materials. This method achieved a doping density as high as 1.4 × 1013 cm-2 without reducing the mobility of the doped materials; after 1 month, the doping concentration remained as high as 1.2 × 1013 cm-2. Defective SiOx can be used to dope most popular 2D transition-metal dichalcogenides. The low-k properties of SiOx render it ideal for spacer doping, which is very attractive from the perspective of circuit operation. In our experiments, MoS2 and WS2 underlap top-gate devices exhibited 10× and 200× increases in their on-currents, respectively, after being doped with SiOx. These results indicate that SiOx doping can be conducted to manufacture high-performance 2D devices.

Vertical Field Emission Air-Channel Diodes and Transistors.

Vacuum channel transistors are potential candidates for low-loss and high-speed electronic devices beyond complementary metal-oxide-semiconductors (CMOS). When the nanoscale transport distance is smaller than the mean free path (MFP) in atmospheric pressure, a transistor can work in air owing to the immunity of carrier collision. The nature of a vacuum channel allows devices to function in a high-temperature radiation environment. This research intended to investigate gate location in a vertical vacuum channel transistor. The influence of scattering under different ambient pressure levels was evaluated using a transport distance of about 60 nm, around the range of MFP in air. The finite element model suggests that gate electrodes should be near emitters in vertical vacuum channel transistors because the electrodes exhibit high-drive currents and low-subthreshold swings. The particle trajectory model indicates that collected electron flow (electric current) performs like a typical metal oxide semiconductor field effect-transistor (MOSFET), and that gate voltage plays a role in enhancing emission electrons. The results of the measurement on vertical diodes show that current and voltage under reduced pressure and filled with CO2 are different from those under atmospheric pressure. This result implies that this design can be used for gas and pressure sensing.