An Eutectic Mixture in the Tetrabutylammonium Bromide-Octanol System: Macroscopic and Microscopic Points of View.

An eutectic mixture of tetrabutylammonium bromide and octanol in the molar ratio 1-10 exhibited a melting point of -17 °C. This system was investigated by means of infrared spectroscopy, in the liquid and in the solid state. Classical molecular dynamics was performed to study the fine details of the hydrogen bond interactions established in the mixture. Both octanol and the mixtures displayed an almost featureless far-infrared spectrum in the liquid state but it becomes highly structured in the solid phase. DFT calculations suggest that new vibrational modes appearing in the mixture at low temperatures may be related to the population of the higher energy conformers of the alcohol. Mid-infrared spectroscopy measurements evidenced no shift of the CH stretching bands in the mixture compared to the starting materials, while the OH stretching are blue shifted by a few cm-1. Consistently, molecular dynamics provides a picture of the mixture in which part of the hydrogen bonds (HB) of pure octanol is replaced by weaker HB formed with the Br anion. Due to these interactions the ionic couple becomes more separated. In agreement with this model, the lengths of all HB are much larger than those observed in mixtures containing acids reported in previous studies.

Binary Mixtures of Choline Acetate and Tetrabutylammonium Acetate with Natural Organic Acids by Vibrational Spectroscopy and Molecular Dynamics Simulations.

We present a study of several mixtures obtained by the mixing of two organic acetate-based salts (choline acetate, ChAc, or tetrabutylammonium acetate, TBAAc) with three different natural organic acids (ascorbic acid, AA, citric acid, CA, and maleic acid, MA). The structures of the starting materials and of the mixtures were characterized by infrared spectroscopy (FT-IR) and classic molecular dynamics simulations (MD). The thermal behavior was characterized by differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA). The obtained mixtures, especially the ChAc-based ones, strongly tend to vitrify at low temperatures and are stable up to 100-150 °C. The FTIR measurements suggest the formation of a strong H-bond network: the coordination between acids and ChAc or TBAAc takes place by the donation of the H-bond by the acids to the oxygen of the acetate anion, which acts as an acceptor (HBA). The comparison with MD analysis indicates that acids predominantly exploit their more acidic hydrogens. In particular, we observe the progressive shift of νC═O and νOH when the ratios of acids increase. The structural differences between the two studied cations influence the spatial distribution of the components in the mixture bulk phases. In particular, the analysis of the theoretical structure function I(q) of the TBAAc-based systems shows the presence of important prepeaks at low q, a sign of the formation of apolar domain, due to the nanosegregation of the alkyl chains.

Dynamics in Quaternary Ionic Liquids with Non-Flexible Anions: Insights from Mechanical Spectroscopy.

The present work investigates how mechanical properties and ion dynamics in ionic liquids (ILs) can be affected by ILs' design while considering possible relationships between different mechanical and transport properties. Specifically, we study mechanical properties of quaternary ionic liquids with rigid anions by means of Dynamical Mechanical Analysis (DMA). We are able to relate the DMA results to the rheological and transport properties provided by viscosity, conductivity, and diffusion coefficient measurements. A good agreement is found in the temperature dependence of different variables described by the Vogel-Fulcher-Tammann model. In particular, the mechanical spectra of all the measured liquids showed the occurrence of a relaxation, for which the analysis suggested its attribution to a diffusive process, which becomes evident when the ion dynamics are not affected by the fast structural reorganization of flexible anions on a local level.

Some Considerations about the Anodic Limit of Ionic Liquids Obtained by Means of DFT Calculations.

Ionic liquids are good candidates as the main component of safe electrolytes for high-energy lithium-ion batteries. The identification of a reliable algorithm to estimate the electrochemical stability of ionic liquids can greatly speed up the discovery of suitable anions able to sustain high potentials. In this work, we critically assess the linear dependence of the anodic limit from the HOMO level of 27 anions, whose performances have been experimentally investigated in the previous literature. A limited r Pearson's value of ≈0.7 is found even with the most computationally demanding DFT functionals. A different model considering vertical transitions in a vacuum between the charged state and the neutral molecule is also exploited. In this case, the best-performing functional (M08-HX) provides a Mean Squared Error (MSE) of 1.61 V2 on the 27 anions here considered. The ions which give the largest deviations are those with a large value of the solvation energy, and therefore, an empirical model that linearly combines the anodic limit calculated by vertical transitions in a vacuum and in a medium with a weight dependent on the solvation energy is proposed for the first time. This empirical method can decrease the MSE to 1.29 V2 but still provides an r Pearson's value of ≈0.72.

Hydrogen and Deuterium Solubility, Diffusivity and Permeability from Sorption Measurements in the Ni33Ti39Nb28 Alloy.

The hydrogen/deuterium sorption properties of Ni33Ti39Nb28 synthesized by the vacuum induction melting technique were measured between 400 and 495 °C for pressure lower than 3 bar. The Sieverts law is valid up to H(D)/M < 0.2 in its ideal form; the absolute values of the hydrogenation/deuteration enthalpy are ΔH(H2) = 85 ± 5 kJ/mol and ΔH(D2) = 84 ± 4 kJ/mol. From the kinetics of absorption, the diffusion coefficient was derived, and an Arrhenius dependence from the temperature was obtained, with Ea,d = 12 ± 1 kJ/mol for both hydrogen isotopes. The values of the alloy permeability, obtained by combining the solubility and the diffusion coefficient, were of the order of 10-9 mol m-1 s-1 Pa-0.5, a value which is one order of magnitude lower than that of Ni41Ti42Nb17, until now the best Ni-Ti-Nb alloy for hydrogen purification. In view of the simplicity of the technique here proposed to calculate the permeability, this method could be used for the preliminary screening of new alloys.

Effect of isopropyl side chain branching and different anions on electronic structure, vibrational spectra, and hydrogen bonding of isopropyl-imidazolium-based ionic liquids: Experimental and theoretical investigations.

In the present work, four branched methylated, 1,2-dimethyl-3-isopropyl-imidazolium (i-[C3Dmim+]) and protonated,1-methyl-3-isopropyl-imidazolium (i-[C3mim+])-based ionic liquids (ILs) with varying anion (Br-, BF4-, PF6-, and NTf2-) were synthesized and investigated by NMR, infrared (IR) and Raman spectroscopy. Based on infrared and Raman spectroscopy, complete vibrational assignments have been performed. The IR and Raman analysis revealed that the vibrational spectra are virtually unaffected upon methylation, while significant frequency changes were observed by changing anion. Furthermore, to determine the electronic structure, energetic stability, and vibrational properties of these i-[C3Dmim]Y, i-[C3mim]Y (Y = Br, BF4, PF6, and NTf2) ion pairs, quantum chemical calculations including the dispersion correction method are performed both on single ions and on ionic couples. The calculated electron density was analyzed to expose non-covalent intra- and interionic interactions by the quantum theory of atoms in molecules (AIM) and interpreted in terms of both anion dependence and type of interaction. Computational results suggest that for all ionic couples the most energetically stable configuration is obtained with the anions located close to the C2 position of the imidazolium cation. However, in the case of i-[C3mim]NTf2 and i-[C3Dmim]BF4, similar energies were obtained in configurations 2 and 3 where the anion is located above the imidazolium ring. For i-[C3mim]Br a stronger hydrogen bond is predicted than for other studied ILs. Calculations indicate that a red shift of the CH stretching bands should occur due to hydrogen bonding; indeed, such displacement of bands is experimentally observed.

Thermal Decomposition, Low Temperature Phase Transitions and Vapor Pressure of Less Common Ionic Liquids Based on the Bis(trifuoromethanesulfonyl)imide Anion.

Four ionic liquids (ILs) based on the bis(trifluoromethanesulfonyl)imide (NTf2) anion were synthesized and characterized concerning their thermal stability, the occurrence of low temperature phase transitions and their volatility. All these physical quantities are highly important for possible applications. Both monocationic and dicationic ILs were considered. All ILs exhibit thermal stability exceeding 350 °C, an extremely high value, due to the presence of the NTf2 anion. Monocationic ILs can undergo crystallization, and they melt at 1 and 38 °C. On the contrary, dicationic ILs containing large positively charged ions display only a glass transition around -40 °C, without any crystallization or melting process; this fact is particularly important in view of the possibly low temperature applications of the dication ILs. The vapor pressure, pv, of the four ILs was measured by isothermal thermogravimetry in the temperature range between 250 and 325 °C; the lowest values of pv were obtained for the two dicationic liquids, suggesting that they are particularly well suited for high temperature applications. The vaporization enthalpy was calculated through the Clausius-Clapeyron equation and was found in the range between ~140 and ~180 kJ/mol depending on the specific IL.

Evidence of the CH···O HydrogenBonding in Imidazolium-Based Ionic Liquids from Far-Infrared Spectroscopy Measurements and DFT Calculations.

Knowledge of all the intermolecular forces occurring in ionic liquids (ILs) is essential to master their properties. Aiming at investigating the weaker hydrogen bonding in aprotic liquids, the present work combined computational study and far-infrared spectroscopy on four imidazolium-based ILs with different anions. The DFT calculations of the ionic couples, using the ωB97X-D functional and considering both the empirical dispersion corrections and the presence of a polar solvent, show that, for all samples, the lowest energy configurations of the ion pair present H atoms, directly bound to C atoms of the cation and close to O atoms of the anion, capable of creating moderate to weak hydrogen bonding with anions. For the liquids containing anions of higher bonding ability, the absorption curves generated from the calculated vibrational frequencies and intensities show absorption bands between 100 and 125 cm-1 corresponding to the stretching of the hydrogen bond. These indications are in complete agreement with the presently reported temperature dependence of the far-infrared spectrum, where the stretching modes of the hydrogen bonding are detected only for samples presenting a moderate interaction and become particularly prominent at low temperatures. Moreover, from the analysis of the infrared spectra, the occurrence of various phase transitions as a function of temperature was detected, and the difference in the average energy between the H-bonded and the dispersion-governed molecular configurations was evaluated.

Comparison of the Performances of Different Computational Methods to Calculate the Electrochemical Stability of Selected Ionic Liquids.

The electrochemical stability windows (ESW) of selected ionic liquids have been calculated by comparing different computational approaches previously suggested in the literature. The molecular systems under study are based on di-alkyl imidazolium and tetra-alkyl ammonium cations coupled with two different imide anions (namely, bis-fluorosulfonyl imide and bis-trifluoromethyl sulfonyl imide), for which an experimental investigation of the ESW is available. Thermodynamic oxidation and reduction potentials have here been estimated by different models based on calculations either on single ions or on ionic couples. Various Density Functional Theory (DFT) functionals (MP2, B3LYP, B3LYP including a polarizable medium and empirical dispersion forces) were exploited. Both vertical and adiabatic transitions between the starting states and the oxidized or reduced states were considered. The approach based on calculations on ionic couples is not able to reproduce the experimental data, whatever the used DFT functional. The best quantitative agreement is obtained by calculations on single ions when the MP2 functional in vacuum is considered and the transitions between differently charged states are vertical (purely electronic without the relaxation of the structure). The B3LYP functional underestimates the ESW. The inclusion of a polar medium excessively widens the ESW, while a large shrinkage of the ESW is obtained by adopting an adiabatic transition scheme instead of a vertical transition one.

Mesoporous Metal-Organic Framework MIL-101 at High Pressure.

The chromium terephthalate MIL-101 is a mesoporous metal-organic framework (MOF) with unprecedented adsorption capacities due to the presence of giant pores. The application of an external pressure can effectively modify the open structure of MOFs and its interaction with guest molecules. In this work, we study MIL-101 under pressure by synchrotron X-ray diffraction and infrared (IR) spectroscopy with several pressure transmitting media (PTM). Our experimental results clearly show that when a solid medium as NaCl is employed, an irreversible amorphization of the empty structure occurs at about 0.4 GPa. Using a fluid PTM, as Nujol or high-viscosity silicone oil, results in a slight lattice expansion and a strong modification of the peak frequency and shape of the MOF hydroxyl vibration below 0.1 GPa. Moreover, the framework stability is enhanced under pressure with the amorphization onset shifted to about 7 GPa. This coherent set of results points out the insertion of the fluid inside the MIL-101 pores. Above 7 GPa, concomitantly to the nucleation of the amorphous phase, we observe a peculiar medium-dependent lattice expansion. The behavior of the OH stretching vibrations under pressure is profoundly affected by the presence of the guest fluid, showing that OH bonds are sensitive vibrational probes of the host-guest interactions. The present study demonstrates that even a polydimethylsiloxane silicone oil, although highly viscous, can be effectively inserted into the MIL-101 pores at a pressure below 0.2 GPa. High pressure can thus promote the incorporation of large polymers in mesoporous MOFs.

Effect of Transitional Metals (Mn and Ni) Substitution in LiCoPO4 Olivines.

Transition metal substitution is a key strategy to optimize the functional properties of advanced crystalline materials used as positive electrodes in secondary lithium batteries (LIBs). Here we investigate the structural alterations in the olivine lattice of Mn and Ni substituted LiCoPO4 phase and the impact on performance in LIBs. X-ray diffraction (XRD) and extended X-ray absorption experiments have been carried out in order to highlight the structural alterations induced by partial substitution of cobalt by manganese and nickel. XRD analysis suggests that substitution induces an expansion of the lattices and an increase of the antisite disorder between lithium and transition metal ions in the structure. XAS data highlight negligible electronic disorder but a relevant modulation in the local coordination around the different metal ions. Moreover, galvanostatic tests showed poor reversibility of the redox reaction compared to the pure LCP sample, and this failure is discussed in detail in view of the observed remarkable structural changes.

Composite Nafion Membranes with CaTiO3-δ Additive for Possible Applications in Electrochemical Devices.

A composite membrane based on a Nafion polymer matrix incorporating a non-stoichiometric calcium titanium oxide (CaTiO3-δ) additive was synthesized and characterized by means of thermal analysis, dynamic mechanical analysis, and broadband dielectric spectroscopy at different filler contents; namely two concentrations of 5 and 10 wt.% of the CaTiO3-δ additive, with respect to the dry Nafion content, were considered. The membrane with the lower amount of additive displayed the highest water affinity and the highest conductivity, indicating that a too-high dose of additive can be detrimental for these particular properties. The mechanical properties of the composite membranes are similar to those of the plain Nafion membrane and are even slightly improved by the filler addition. These findings indicate that perovskite oxides can be useful as a water-retention and reinforcing additive in low-humidity proton-exchange membranes.

Cluster Formation through Hydrogen Bond Bridges across Chloride Anions in a Hydroxyl-Functionalized Ionic Liquid.

Several recent studies of hydroxyl-functionalized ionic liquids (ILs) have shown that cation-cation interactions can be dominating these materials at the molecular level when the anion involved is weakly interacting. The hydrogen bonds between the like ions led to the formation of interesting chain-like, ring-like, or distinct dimeric (i. e. two ion pairs) supermolecular clusters. In the present work, vibrational spectroscopy (ATR-IR and Raman) and density functional theory (DFT) calculations of the hydroxyl-functionalized imidazolium ionic liquid C2 OHmimCl indicate that anion-cation hydrogen bonding interactions are dominating, leading to the formation of distinct dimeric ion pair clusters. In this arrangement, the Cl- anions function as a bridge between the cations by establishing bifurcated hydrogen bonds with the OH group of one cation and the C(2)-H of another cation. Cation-cation interactions, on the other hand, do not play a significant role in the observed clusters.

New Experimental Evidences Regarding Conformational Equilibrium in Ammonium-Bis(trifluoromethanesulfonyl)imide Ionic Liquids.

The X-ray scattering patterns of the two ionic liquids, N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide (TMPA-TFSI) and N-trimethyl-N-hexylammonium bis(trifluoromethanesulfonyl)imide (TMHA-TFSI), sharing a common anion and differing in the length of the alkyl chain of the cation, were measured at room temperature. Molecular dynamics calculations supported the interpretation of the data. The two force-field models, GAFF and DLPOLY 4, were adopted to simulate the scattering patterns. Both of them are able to reproduce the main peaks of the experimental data; however, the DLPOLY model seems to better reproduce the finer details. Moreover, from the simulations, the concentration of the two conformers of TFSI are derived. The comparison with previously reported infrared spectroscopy measurements suggests that also under this aspect the DPOLY model has a better agreement with the experiments.

Hydrogen Induced Abrupt Structural Expansion at High Temperatures of a Ni32Nb28Zr30Cu10 Membrane for H2 Purification.

Ni-Nb-Zr amorphous membranes, prepared by melt-spinning, show great potential for replacing crystalline Pd-based materials in the field of hydrogen purification to an ultrapure grade (>99.999%). In this study, we investigate the temperature evolution of the structure of an amorphous ribbon with the composition Ni32Nb28Zr30Cu10 (expressed in atom %) by means of XRD and DTA measurements. An abrupt structural expansion is induced between 240 and 300 °C by hydrogenation. This structural modification deeply modifies the hydrogen sorption properties of the membrane, which indeed shows a strong reduction of the hydrogen capacity above 270 °C.

Synthesis and Characterization of Cellulose-Based Hydrogels to Be Used as Gel Electrolytes.

Cellulose-based hydrogels, obtained by tuned, low-cost synthetic routes, are proposed as convenient gel electrolyte membranes. Hydrogels have been prepared from different types of cellulose by optimized solubilization and crosslinking steps. The obtained gel membranes have been characterized by infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and mechanical tests in order to investigate the crosslinking occurrence and modifications of cellulose resulting from the synthetic process, morphology of the hydrogels, their thermal stability, and viscoelastic-extensional properties, respectively. Hydrogels liquid uptake capability and ionic conductivity, derived from absorption of aqueous electrolytic solutions, have been evaluated, to assess the successful applicability of the proposed membranes as gel electrolytes for electrochemical devices. To this purpose, the redox behavior of electroactive species entrapped into the hydrogels has been investigated by cyclic voltammetry tests, revealing very high reversibility and ion diffusivity.

Preparation and Characterization of Nanocomposite Polymer Membranes Containing Functionalized SnO2 Additives.

In the research of new nanocomposite proton-conducting membranes, SnO2 ceramic powders with surface functionalization have been synthesized and adopted as additives in Nafion-based polymer systems. Different synthetic routes have been explored to obtain suitable, nanometer-sized sulphated tin oxide particles. Structural and morphological characteristics, as well as surface and bulk properties of the obtained oxide powders, have been determined by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared (FTIR) and Raman spectroscopies, N2 adsorption, and thermal gravimetric analysis (TGA). In addition, dynamic mechanical analysis (DMA), atomic force microscopy (AFM), thermal investigations, water uptake (WU) measurements, and ionic exchange capacity (IEC) tests have been used as characterization tools for the nanocomposite membranes. The nature of the tin oxide precursor, as well as the synthesis procedure, were found to play an important role in determining the morphology and the particle size distribution of the ceramic powder, this affecting the effective functionalization of the oxides. The incorporation of such particles, having sulphate groups on their surface, altered some peculiar properties of the resulting composite membrane, such as water content, thermo-mechanical, and morphological characteristics.

Thermal stability and reduction of iron oxide nanowires at moderate temperatures.

BACKGROUND: The thermal stability of iron oxide nanowires, which were obtained with a hard template method and are promising elements of Li-ion based batteries, has been investigated by means of thermogravimetry, infrared and photoemission spectroscopy measurements. RESULTS: The chemical state of the nanowires is typical of the Fe2O3 phase and the stoichiometry changes towards a Fe3O4 phase by annealing above 440 K. The shape and morphology of the nanowires is not modified by moderate thermal treatment, as imaged by scanning electron microscopy. CONCLUSION: This complementary spectroscopy-microscopy study allows to assess the temperature limits of these Fe2O3 nanowires during operation, malfunctioning or abuse in advanced Li-ion based batteries.

Fast H-vacancy dynamics during alanate decomposition by anelastic spectroscopy. proposition of a model for Ti-enhanced hydrogen transport.

A systematic study of the dehydrogenation process of undoped and of catalyzed NaAlH4 by means of anelastic spectroscopy is presented. Evidence is reported of the formation of a highly mobile species during decomposition, which has been identified in off-stoichiometric AlH6-x units, giving rise to fast H vacancy local dynamics. The formation of such stoichiometry defects starts at temperatures much lower in Ti doped than in undoped samples, and concomitantly with the decomposition reaction. The catalyst atoms decrease the energy barrier to be overcome by H to break the bond, thus enhancing the kinetics of the chemical reactions and decreasing the temperature at which the dehydrogenation processes take place. The experimental data show that not all the hydrogen released by the formula units during the evolution of decomposition evolves out of the sample, but part of it remains in the lattice and migrates on a long-range scale within the sample. We identify, in this H mobilized population, the species which induces the fast tetragonal to monoclinic phase transformation accompanying decomposition. A partial spontaneous thermally activated regression of decomposition has also been observed by aging experiments. A model is proposed which accounts for the action of the Ti catalyst and for the atomistic mechanism of decomposition.

Point defect dynamics and evolution of chemical reactions in alanates by anelastic spectroscopy.

We report the first measurements of elastic modulus and energy dissipation in Ti-doped and undoped sodium aluminum hydride. It is shown that the chemical reactions that occur by varying the sample temperatures or by aging most sensitively affect the elastic constants, such that the modulus variations allow the time and temperature evolution of decomposition to be monitored. After a well-defined thermal treatment at 436 K, a thermally activated relaxation process appears at 70 K in the kilohertz range, denoting the existence of a new species, likely involving hydrogen, having a very high mobility, that is, 10(3) jumps/s at the peak temperature corresponding to a relaxation rate of about 10(11) s(-1) at room temperature. The activation energy of the process is 0.126 eV and the preexponential factor 7 x 10(-14) s, which is typical of point defect relaxation. The peak is very broad with respect to a single Debye process, indicating strong interaction or/and multiple jumping type of the mobile entity. The present data suggest that the models aiming at interpreting the decomposition reactions and kinetics should take into account the indicated point-defect dynamics and stoichiometry defects.