Enhanced photo-degradation of N-methyl-2-pyrrolidone (NMP): Influence of matrix components, kinetic study and artificial neural network modelling.

This study investigates the degradation of N-methyl-2-pyrrolidone (NMP) by UV-C and UV-C/PMS-treatment processes. The degradation of NMP was less than 2% by UV-C photolysis. To enhance the degradation, PMS was used as a source of sulphate (SO4• -) and hydroxyl (HO•) radicals in the UV-C photolysis treatment system. The operational parameters such as initial pH and concentration of NMP and PMS and water matrix elements were studied to understand their effects on degradation. At pH = 6.3, λ = 260 nm, initial concentration of NMP = 10 mg/L, PMS = 300 mg/L and carbonate ion = 150 mg/L, the degradation of NMP was found to be 97.5%, along with 26.86% of TOC removal. The bicarbonate ions, nitrate ions, and chloride ions showed the inhibitory effect on the degradation of NMP. The NMP degradation was governed by pseudo first order kinetics. SO4• - was found to be the dominating degradation species through the radical quenching studies. The intermediates formed during the degradation were identified through LC-MS analysis, and a degradation pathway was proposed. The experimental data was successfully validated through the application of the developed ANN model. The R2 between expected and experimental outcomes was 0.97. The developed ANN model was successful in predicting the degradation of NMP in the given reaction conditions with the prediction accuracy of 90.91% and RMSE of 3.54.

One-Pot Synthesis of Sulfur-Doped TiO2/Reduced Graphene Oxide Composite (S-TiO2/rGO) With Improved Photocatalytic Activity for the Removal of Diclofenac From Water.

Sulfur-doped TiO2 (S-TiO2) composites with reduced graphene oxide (rGO), wt. % of rGO equal to 0.5%, 2.75%, and 5.0%, were prepared by a one-pot solvothermal procedure. The aim was to improve photocatalytic performance in comparison to TiO2 under simulated solar irradiation for the treatment of diclofenac (DCF) in aqueous medium. The obtained composites were characterized for physical-chemical properties using thermogravimetric analysis (TGA), X-ray diffractograms (XRD), Raman, scanning electron microscopy (SEM)/energy dispersive X-ray (EDX), Brauner Emmett Teller (BET), and photoluminescence (PL) analyses, indicating successful sulfur doping and inclusion of rGO. Sulfur doping and rGO have successfully led to a decrease in photogenerated charge recombination. However, both antagonistic and synergistic effects toward DCF treatment were observed, with the latter being brought forward by higher wt.% rGO. The composite with 5.0 wt.% rGO has shown the highest DCF conversion at pH 4 compared to that obtained by pristine TiO2, despite lower DCF adsorption during the initial dark period. The expected positive effects of both sulfur doping and rGO on charge recombination were found to be limited because of the subpar interphase contact with the composite and incomplete reduction of the GO precursor. Consequent unfavorable interactions between rGO and DCF negatively influenced the activity of the studied S-TiO2/rGO photocatalyst under simulated solar irradiation.