ABSTRACT
This paper experimentally investigates the effectiveness of electronic dispersion compensation (EDC) for signals limited by self phase modulation (SPM) and various dispersion levels. The sources considered are low-cost conventional directly modulated lasers (DMLs), fabricated for operation at 2.5 Gb/s but modulated at 10 Gb/s. Performance improvement is achieved by means of electronic feed-forward and decision-feedback equalization (FFE/DFE) at the receiver end. Experimental studies consider both transient and adiabatic chirp dominated DMLs sources. The improvement is evaluated in terms of required optical signal-to-noise ratio (ROSNR) for bit-error-rate (BER) values of 10(-3) versus launch power over uncompensated links of standard single mode fiber (SSMF).
Subject(s)
Computer Communication Networks/instrumentation , Electronics/instrumentation , Optical Fibers , Signal Processing, Computer-Assisted/instrumentation , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
Full-duplex bidirectional transmission at 10 Gb/s is demonstrated for extended wavelength division multiplexed passive optical network (WDM-PON) applications, achieving transmission distances up to 25 km of standard single mode fiber (SSMF) when using a low-bandwidth (approximately 1.2 GHz) reflective semiconductor optical amplifier (RSOA) for signal re-modulation at the optical network unit (ONU). The system is assisted by optimum offset filtering at the optical line terminal (OLT)-receiver and the performance is further improved with the use of decision-feedback equalization (DFE). Chromatic dispersion (CD) and Rayleigh Backscattering (RB) effects are considered and analyzed.