Advances on Cellulose Manufacture in Biphasic Reaction Media.

Cellulose is produced industrially by the kraft and sulfite processes. The evolution of these technologies in biorefineries is driven by the need to obtain greater added value through the efficient use of raw materials and energy. In this field, organosolv technologies (and within them, those using liquid phases made up of water and one partly miscible organic solvent, known as "biphasic fractionation" in reference to the number of liquid phases) represent an alternative that is receiving increasing interest. This study considers basic aspects of the composition of lignocellulosic materials, describes the fundamentals of industrial cellulose pulp production processes, introduces the organosolv methods, and comprehensively reviews published results on organosolv fractionation based on the use of media containing water and an immiscible solvent (1-butanol, 1-pentanol or 2-methyltetrahydrofuran). Special attention is devoted to aspects related to cellulose recovery and fractionation selectivity, measured through the amount and composition of the treated solids.

Arundo donax L Processing in Catalyzed Butanol-Water Media in the Scope of Lignocellulose Biorefineries.

Arundo donax L samples, before or after aqueous extraction to remove extractives, were subjected to chemical fractionation in H2SO4-catalyzed mixtures of 1-butanol and water. The partial miscibility of 1-butanol and water at room temperature allowed the separation of the three major feedstock components in separate streams (lignin, accumulated in the 1-butanol-rich phase; hemicellulose-derived products, accumulated in the aqueous acidic phase; and cellulose, present in the solid phase). The effects of selected variables (temperature, catalyst concentration, reaction time and 1-butanol content of the reaction media) on variables measuring the solid recovery yield and the compositions of phases from fractionation were measured. Using water-extracted A. donax L as a substrate, the best operational conditions enabled 93.2% hemicellulose removal and 85.4% delignification with limited cellulose solubilization (15%). The experimental results provided key information to assess the proposed process in the scope of biorefineries.

Effects of Hydrothermal Processing on Miscanthus × giganteus Polysaccharides: A Kinetic Assessment.

Miscanthus × giganteus samples were characterized for composition and treated with hot compressed water (hydrothermal or autohydrolysis treatments) at temperatures in the range of 190-240 °C. The liquid phases from treatments were analyzed to assess the breakdown of susceptible polysaccharides into a scope of soluble intermediates and reaction products. The experimental concentration profiles determined for the target compounds (monosaccharides, higher saccharides, acetic acid and sugar-decomposition products) were interpreted using a pseudohomogeneous kinetic mechanism involving 27 reactions, which were governed by kinetic coefficients showing an Arrhenius-type temperature dependence. The corresponding activation energies were calculated and compared with data from the literature. The kinetic equations allowed a quantitative assessment of the experimental results, providing key information for process simulation and evaluation.

Evaluation of Acidic Ionic Liquids as Catalysts for Furfural Production from Eucalyptus nitens Wood.

Eucalyptus nitens wood samples were subjected to hydrothermal processing to obtain soluble saccharides from the hemicellulosic fraction. The hemicellulose-derived saccharides were employed as substrates for furfural production in biphasic media made up of water, methyl isobutyl ketone, and one acidic ionic liquid (1-butyl-3-methylimidazolium hydrogen sulfate or 1-(3-sulfopropyl)-3-methylimidazolium hydrogen sulfate). The reactions were carried out in a microwave-heated reactor to assess the effects of the most influential variables. Under selected operational conditions, the molar conversions of the precursors into furfural were within the range of 77-86%. The catalysts conserved their activity after reutilization in five consecutive reaction cycles.

Prebiotic effects of pectooligosaccharides obtained from lemon peel on the microbiota from elderly donors using an in vitro continuous colon model (TIM-2).

The development of new prebiotics capable of modulating the gut microbiota in the elderly has become an area of great interest due to the particular vulnerability and frailty of this population. In the present work, mixtures of pectin-derived oligosaccharides (POS) were manufactured from lemon peel waste and evaluated for their capability to modulate the gut microbiota using, as inoculum, a pool of faeces from elderly donors. Both changes in the microbiota and the metabolic activity were assessed and compared with commercial fructooligosaccharides (FOS) and the standard ileal efflux medium (SIEM) using the TIM-2 in vitro colon model. POS fermentation led to similar or even better effects than FOS at phylum, family and genus levels. Higher increments in beneficial species such as Faecalibacterium prausnitzii and larger alpha diversity values were observed with POS in comparison with FOS and in some cases with SIEM. The PCoA analyses revealed that the microbial profiles resulting from POS and FOS bacterial fermentation were rather similar and differed from those observed after SIEM fermentation. Finally, although butyrate cumulative production was comparable among substrates, the highest short chain fatty acid (SCFA) and the lowest branched chain fatty acid (BCFA) cumulative production was observed in POS experiments. These results support the potential of pectin-derived oligosaccharides as prebiotic candidates targeting gut health in the elderly.

Technologies for Eucalyptus wood processing in the scope of biorefineries: A comprehensive review.

Eucalyptus is the most widely planted type of hardwoods, and represents an important biomass source for the production of fuels, chemicals, and materials. Its industrial benefit can be achieved by processes following the biorefinery concept, which is based on the selective separation ("fractionation") of the major components (hemicelluloses, cellulose and lignin), and on the generation of added-value from the resulting fractions. This article provides a in-depth assessment on the composition of Eucalyptus wood and a critical evaluation of selected technologies allowing its overall exploitation. These latter include treatments with organosolvents and with emerging fractionation agents (ionic liquids and deep eutectic solvents). The comparative evaluation of the diverse processing technologies is carried out in terms of degree of fractionation, yields and selectivities. The weak and strong points, challenges, and opportunities of the diverse fractionation methods are identified, focusing on the integral utilization of the feedstocks.

Manufacture of Platform Chemicals from Pine Wood Polysaccharides in Media Containing Acidic Ionic Liquids.

Pinus pinaster wood samples were subjected to chemical processing for manufacturing furans and organic acids from the polysaccharide fractions (cellulose and hemicellulose). The operation was performed in a single reaction stage at 180 or 190 °C, using a microwave reactor. The reaction media contained wood, water, methyl isobutyl ketone, and an acidic ionic liquid, which acted as a catalyst. In media catalyzed with 1-butyl-3-methylimidazolium hydrogen sulfate, up to 60.5% pentosan conversion into furfural was achieved, but the conversions of cellulose and (galacto) glucomannan in levulinic acid were low. Improved results were achieved when AILs bearing a sulfonated alkyl chain were employed as catalysts. In media containing 1-(3-sulfopropyl)-3-methylimidazolium hydrogen sulfate as a catalyst, near quantitative conversion of pentosans into furfural was achieved at a short reaction time (7.5 min), together with 32.8% conversion of hexosans into levulinic acid. Longer reaction times improved the production of organic acids, but resulted in some furfural consumption. A similar reaction pattern was observed in experiments using 1-(3-sulfobutyl)-3-methylimidazolium hydrogen sulfate as a catalyst.

Characterization of Eucalyptus nitens Lignins Obtained by Biorefinery Methods Based on Ionic Liquids.

Eucalyptus nitens wood samples were subjected to consecutive stages of hydrothermal processing for hemicellulose solubilization and delignification with an ionic liquid, i.e., either 1-butyl-3-methylimidazolium hydrogen sulfate or triethylammonium hydrogen sulfate. Delignification experiments were carried out a 170 C for 10-50 min. The solid phases from treatments, i.e., cellulose-enriched solids, were recovered by centrifugation, and lignin was separated from the ionic liquid by water precipitation. The best delignification conditions were identified on the basis of the results determined for delignification percentage, lignin recovery yield, and cellulose recovery in solid phase. The lignins obtained under selected conditions were characterized in deep by 31P-NMR, 13C-NMR, HSQC, and gel permeation chromatography. The major structural features of the lignins were discussed in comparison with the results determined for a model Ionosolv lignin.

Assesment on the chemical fractionation of Eucalyptus nitens wood: Characterization of the products derived from the structural components.

Following an integrated approach, Eucalyptus nitens wood samples were subjected to consecutive stages of aqueous fractionation and organosolv delignification, in order to separate hemicelluloses (mainly converted into soluble products from the aqueous stage) from lignin (largely converted into soluble fragments in the organosolv stage) and from cellulose (accumulated in the solid phase from pulping). The compositions of selected reaction media were studied by selected spectrophotometric, spectrometric, chromatographic, and nuclear magnetic resonance methods; and the solid phases from treatments were studied by diffractometry and scanning electron microscopy. The experimental information from the above tasks provides a deep insight on the yields, properties and potential applications of the target fractions in the scope of biorefineries.

Potential of Fructooligosaccharides and Xylooligosaccharides as Substrates To Counteract the Undesirable Effects of Several Antibiotics on Elder Fecal Microbiota: A First in Vitro Approach.

Fructooligosaccharides (FOS) and xylooligosaccharides (XOS) were employed as substrates for in vitro fermentations to assess their capacity to counteract the effects caused by three antibiotics (ABs) at different doses on the elderly gut microbiota and its metabolic activity. The AB type and dose scarcely affected the total bacterial numbers and the microbiota composition after 24 h. However, in the presence of ABs, the relative percentages of Lactobacillus decreased (from 11.4% to 3.2% in the presence of XOS1), as well as the butyrate production, whereas the population of Bacteroides increased significantly in the presence of XOS1 (from 27.5% to 55.7%). FOS were able to counteract these effects by increasing the butyrate production and the number of Lactobacillus, while maintaining the number of Bacteroides almost constant and decreasing the clostridia. XOS2 (mainly DP = 2-4) also showed ability to increase the percentages of Bifidobacterium and the production of both butyrate and acetate.

Valorization of peanut shells: Manufacture of bioactive oligosaccharides.

Peanut shells were subjected to non-isothermal aqueous treatments to cause the partial breakdown of hemicelluloses into soluble oligosaccharides and lignin-derived compounds with high antioxidant activity. The effects of temperature on the chemical composition of the substrate and soluble reaction products were assessed. Under selected conditions (210°C, severity=4.09), the overall amount of poly- and oligo- saccharides present in the liquid phase reached 9.8g/L. This solution was refined by consecutive stages of discontinuous diafiltration, yielding a refined product containing about 72.4wt% of oligomers at a global yield of 8.5kg/100kg oven-dry PS. The purified products were characterized by HPLC, MALDI-TOF-MS and FTIR, confirming the major reaction products were saccharides made up of xylose with degrees of polymerization up to 17, substituted with acetyl and methylglucuronosyl groups, for which a number of pharmaceutical and food applications have been proposed. Solubilization of hemicelluloses in the treatments resulted in the production of solids enriched in cellulose and lignin suitable for further applications.

Furfural production from Eucalyptus wood using an Acidic Ionic Liquid.

Eucalyptus globulus wood samples were treated with hot, compressed water to separate hemicelluloses (as soluble saccharides) from a solid phase mainly made up of cellulose and lignin. The liquid phase was dehydrated, and the resulting solids (containing pentoses as well as poly- and oligo- saccharides made up of pentoses) were dissolved and reacted in media containing an Acidic Ionic Liquid (1-butyl-3-methylimidazolium hydrogen sulfate) and a co-solvent (dioxane). The effects of the reaction time on the product distribution were studied at temperatures in the range 120-170°C for reaction times up to 8h, and operational conditions leading to 59.1% conversion of the potential substrates (including pentoses and pentose structural units in oligo- and poly- saccharides) into furfural were identified.

Furfural production using ionic liquids: A review.

Furfural, a platform chemical with a bright future, is commercially obtained by acidic processing of xylan-containing biomass in aqueous media. Ionic liquids (ILs) can be employed in processed for furfural manufacture as additives, as catalysts and/or as reaction media. Depending on the IL utilized, externally added catalysts (usually, Lewis acids, Brönsted acids and/or solid acid catalysts) can be necessary to achieve high reaction yields. Oppositely, acidic ionic liquids (AILs) can perform as both solvents and catalysts, enabling the direct conversion of suitable substrates (pentoses, pentosans or xylan-containing biomass) into furfural. Operating in IL-containing media, the furfural yields can be improved when the product is continuously removed along the reaction (for example, by stripping or extraction), to avoid unwanted side-reactions leading to furfural consumption. These topics are reviewed, as well as the major challenges involved in the large scale utilization of ILs for furfural production.

Production, Purification, and in Vitro Evaluation of the Prebiotic Potential of Arabinoxylooligosaccharides from Brewer's Spent Grain.

Brewer's spent grain (BSG) samples were subjected to a two-step aqueous processing (starch extraction and autohydrolysis) in order to assess their potential as a raw material for obtaining a mixture of arabinoxylooligosaccharides (AXOS) suitable to be use as prebiotics for elderly. After hydrothermal treatment, the liquors were refined by a sequence of purification and conditioning steps including membrane filtration, enzymatic hydrolysis, and ion exchange. The presence of both substituted (degree of polimerization (DP) = 2-10) and unsubstituted (DP = 2-16) oligosaccharides made up of xylose and arabinose (AXOS) were confirmed in purified mixtures (in which total OS content = 84% w/w) by using chromatographic techniques and matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS). Finally, AXOS were evaluated for their prebiotic activity by in vitro fermentation assays using fecal inocula from elderly people, demonstrating that AXOS were slightly better substrates than FOS, in terms of bacterial population shifts as in the production of SCFA.

A biorefinery approach based on fractionation with a cheap industrial by-product for getting value from an invasive woody species.

Acacia dealbata wood (an invasive species) was subjected to fractionation with glycerol (a cheap industrial by-product), and the resulting solid phase was used as a substrate for enzymatic hydrolysis. Glycerol fractionation allowed an extensive delignification while preserving cellulose in solid phase. The solids from the fractionation stage showed high susceptibility to enzymatic hydrolysis. Solids obtained under selected fractionation conditions (glycerol content of media, 80 wt%; duration, 1h; liquid to solid ratio, 6 g/g; alkaline and neutral washing stages) were subjected to enzymatic saccharification to achieve glucose concentrations up to 85.40 g/L, with almost complete cellulose conversion into glucose. The results confirmed the potential of glycerol as a fractionation agent for biorefineries.

Acidic processing of hemicellulosic saccharides from pine wood: product distribution and kinetic modeling.

Water soluble compounds were removed from Pinus pinaster wood by a mild aqueous extraction, and the treated wood was subjected to hydrothermal processing to convert most hemicelluloses into soluble saccharides (including low molecular weight polymers, oligomers and monosaccharides). The liquid phase containing hemicellulose-derived saccharides was acidified with sulfuric acid and heated up to 130-250°C to obtain furans and levulinic acid as major products. The concentration profiles of the major compounds participating in the reactions were interpreted by a kinetic model. A maximum conversion of pentoses into furfural near 80% was predicted at high temperature and short time, conditions leading to 24% conversion of hexoses into HMF. Production of levulinic acid was favored at low temperatures. Maximum molar conversion of hexoses into levulinic acid (66.7% at 130°C) needed a long reaction time (235 h). A value of 53.0% can be achieved at 170°C after 5 h.

Simultaneous extraction and depolymerization of fucoidan from Sargassum muticum in aqueous media.

The biomass components of the invasive seaweed Sargassum muticum were fractionated to allow their separate valorization. S. muticum (Sm) and the solid residue remaining after alginate extraction of this seaweed (AESm) were processed with hot, compressed water (hydrothermal processing) to assess the effects of temperature on fucoidan solubilization. Fucose-containing oligosaccharides were identified as reaction products. Operating under optimal conditions (170 °C), up to 62 and 85 wt% of the dry mass of Sm and AESm were solubilized, respectively. The reaction media were subjected to precipitation, nanofiltration and freeze-drying. The dried products contained 50% and 85% of the fucoidan present in Sm and AESm, respectively; together with other components such as phenolics and inorganic components. The saccharidic fraction, accounting for up to 35% of the dried extracts, contained fucose as the main sugar, and also galactose, xylose, glucose and mannose. The concentrates were characterized for antioxidant activity using the TEAC assay.

Characterization, refining and antioxidant activity of saccharides derived from hemicelluloses of wood and rice husks.

Samples of rice husks, Eucalyptus globulus wood and Pinus pinaster wood (containing arabinoxylan, acetylated glucuronoxylan and acetylated glucomannan as major hemicellulose components, respectively) were subjected to autohydrolysis. The resulting liquid phases, containing mainly hemicellulose-derived saccharides, were refined by physicochemical methods to reduce their contents of monosaccharides and non-saccharide compounds. Raw autohydrolysis liquors and refined concentrates coming from aqueous treatments were assayed for antioxidant activity using the following assays: reducing power (FRAP), DPPH and ABTS radical scavenging activity and protection of ß-carotene-linoleic emulsions from oxidation. The reducing power and radical scavenging capacity of the non refined fractions were comparable to the ones determined for the reference compound butylhydroxytoluene. Hemicellulose concentrated from the different feedstocks and refining protocols showed a dose dependent antioxidant activity in the range of concentrations evaluated. The in vitro antioxidant activity of concentrates correlated with their phenolic content.

Manufacture and properties of bifidogenic saccharides derived from wood mannan.

Pinus pinaster wood samples were subjected to double hydrothermal processing. The liquors coming from the second stage, containing soluble saccharides of polymeric or oligomeric nature from hemicelluloses (POHs), were subjected to membrane processing (operating in discontinuous diafiltration) for refining and fractionation. Refined POH fractions were characterized by matrix-assisted laser desorption/ionization time of flight mass spectrometry and chromatographic techniques. The most complex POH component was made up of 14 hexoses and contained 4 acetyl groups. The fermentability of purified POHs by human fecal inocula was assessed by measuring both carbon source consumption and formation of short-chain fatty acids. The bifidogenic ability of POHs was confirmed by fluorescence in situ hybridization. The stimulatory effects on the bifidobacterial population reached by POHs were of the same order as those obtained with commercial fructooligosaccharides.

Recovery and concentration of antioxidants from winery wastes.

Grape and wine byproducts have been extensively studied for the recovery of phenolic compounds with antioxidant activity and a variety of biological actions. The selective recovery and concentration of the phenolic compounds from the liquid phase separated from further diluted winery wastes has been proposed. Adsorption onto non ionic polymeric resins and further desorption with ethanolic solutions was studied. Several commercial food grade resins were screened with the aim of selecting the most suited for the practical recovery of phenolic compounds with radical scavenging activity. Under the optimized desorption conditions (using Sepabeads SP207 or Diaion HP20 as adsorbents and eluting with 96% ethanol at 50 °C) a powdered yellow-light brown product with 50% phenolic content, expressed as gallic acid equivalents, was obtained. The radical scavenging capacity of one gram of product was equivalent to 2-3 g of Trolox.