Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 12 de 12
Filter
Add more filters










Publication year range
1.
Opt Lett ; 40(21): 4899-902, 2015 Nov 01.
Article in English | MEDLINE | ID: mdl-26512478

ABSTRACT

An eight-phase-shift-keying signal is experimentally de-aggregated onto two four-pulse amplitude modulation signals using nonlinear processes in optical elements. Quadrature-phase-shift-keying signals are similarly de-multiplexed into two binary phase shift keying signals by mapping the data points onto the constellation axes. De-multiplexing performance is evaluated as a function of the optical signal-to-noise ratio of the incoming signals. The effect of phase noise is also studied.

2.
Opt Lett ; 40(14): 3284-7, 2015 Jul 15.
Article in English | MEDLINE | ID: mdl-26176450

ABSTRACT

A radio frequency (RF) photonic filter is experimentally demonstrated using an optical tapped delay line (TDL) based on an optical frequency comb and a periodically poled lithium niobate (PPLN) waveguide as multiplexer. The approach is used to implement RF filters with variable bandwidth, shape, and center-frequency.

3.
Opt Lett ; 40(9): 2012-5, 2015 May 01.
Article in English | MEDLINE | ID: mdl-25927771

ABSTRACT

We experimentally studied the performance of a delay-line interferometer-based optical signal-to-noise ratio (OSNR) monitor that is pre-calibrated in optimal conditions for 25-Gbaud pol-muxed quadrature-amplitude-modulation (QAM) signals, when unpredicted changes outside the monitor occurred either in the transmitter or the link.

4.
Opt Lett ; 39(23): 6585-8, 2014 Dec 01.
Article in English | MEDLINE | ID: mdl-25490627

ABSTRACT

We demonstrate optical Nyquist channel generation based on a comb-based optical tapped-delay-line. The frequency lines of an optical frequency comb are used as the taps of the optical tapped-delay-line to perform a finite-impulse response (FIR) filter function. A single optical nonlinear element is utilized to multiplex the taps and form the Nyquist signal. The tunablity of the approach over the baud rate and modulation format is shown. Optical signal-to-noise ratio penalty of 2.8 dB is measured for the 11-tap Nyquist filtering of 32-Gbaud QPSK signal.

5.
Opt Lett ; 39(16): 4915-8, 2014 Aug 15.
Article in English | MEDLINE | ID: mdl-25121907

ABSTRACT

We demonstrate a tunable, optical generation scheme of higher-order modulation formats including pulse amplitude modulation (PAM) and quadrature amplitude modulation (QAM). Using this method, 100.4 Gbit/s 16-QAM and 120 Gbit/s 64-QAM were generated from 50.2 and 40 Gbit/s QPSK signals at EVMs of 7.8% and 6.4%, and 60 Gbit/s 8-PAM were generated at an EVM of 8.1% using three 20-Gbit/s BPSK signals. We also demonstrated a successful transmission of 80 Gbit/s 16-QAM through 80 km SMF-28 after compensating with 20 km DCF. All signals were generated, transmitted, and detected with BER below the forward error correction threshold.

6.
Opt Lett ; 38(17): 3350-3, 2013 Sep 01.
Article in English | MEDLINE | ID: mdl-23988954

ABSTRACT

We demonstrate a reconfigurable optical transmitter of higher-order modulation formats including pulse-amplitude-modulation (PAM) signals and quadrature-amplitude-modulation (QAM) signals. We generated six different modulation formats by multiplexing 10 Gbit/s on-off-keying (OOK) signals (10 Gbaud binary phase-shift keying, 4-PAM, 8-PAM quadrature phase-shift keying (QPSK), 16-QAM and 16-star-QAM with error-vector magnitudes (EVMs) of 8.1%, 7.5%, 7.8%, 8.2%, 7.2%, and 6.9%, respectively) and 80 Gbit/s 16-QAM with an EVM of 8.5%, as well as 120 Gbit/s 64-QAM with an EVM of 7.1%, using two or three 40 Gbit/s QPSK signals, respectively. We also successfully transmitted the generated 16-QAM signals through a 100 km transmission line with negligible power penalty.

7.
Opt Lett ; 37(21): 4365-7, 2012 Nov 01.
Article in English | MEDLINE | ID: mdl-23114297

ABSTRACT

Subchannel data updating of high-order modulation format signals using cascaded sum- and difference-frequency generation in a single periodically poled lithium niobate waveguide is demonstrated. One quadrature phase-shift-keying subchannel of a 16-quadrature amplitude modulation (QAM) signal at 40 Gbit/s is successfully updated, with an optical signal-to-noise ratio (OSNR) penalty of ~2 dB for return-to-zero and ~4 dB for non-return-to-zero at a bit-error rate (BER) of 2×10(-3). Simultaneous processing of four wavelength-multiplexed 16-QAM signals with an average OSNR penalty of 4.5 dB at a BER of 2×10(-3) is also demonstrated.

8.
Opt Lett ; 36(16): 3215-7, 2011 Aug 15.
Article in English | MEDLINE | ID: mdl-21847212

ABSTRACT

We experimentally demonstrate a chromatic dispersion insensitive monitoring technique for monitoring of polarization mode dispersion and time misalignment in a 80 Gbit/s polarization-multiplexed return-to-zero differential phase-shift-keying (Pol-MUX RZ-DPSK) signal using a polarimeter and degree-of polarization (DOP) measurements. This technique is modulation format independent (i.e., applicable to both the phase- and amplitude-modulated data) and capable of measuring the fast change of polarization effects caused by vibration or other fast disturbances in the fiber link. We show that the monitored DOP of this signal decreases by 10.8% with differential group delay of 0-12 ps and decreases by 20% with a maximum misalignment of 12.5 ps between two orthogonally polarized RZ-DPSK channels. These measurements are less sensitive to chromatic dispersion of 0-400 ps/nm.

9.
Opt Express ; 19(9): 8242-53, 2011 Apr 25.
Article in English | MEDLINE | ID: mdl-21643074

ABSTRACT

We demonstrate an optical transmitter based on dynamic optical arbitrary waveform generation (OAWG) which is capable of creating high-bandwidth (THz) data waveforms in any modulation format using the parallel synthesis of multiple coherent spectral slices. As an initial demonstration, the transmitter uses only 5.5 GHz of electrical bandwidth and two 10-GHz-wide spectral slices to create 100-ns duration, 20-GHz optical waveforms in various modulation formats including differential phase-shift keying (DPSK), quaternary phase-shift keying (QPSK), and eight phase-shift keying (8PSK) with only changes in software. The experimentally generated waveforms showed clear eye openings and separated constellation points when measured using a real-time digital coherent receiver. Bit-error-rate (BER) performance analysis resulted in a BER < 9.8 × 10(-6) for DPSK and QPSK waveforms. Additionally, we experimentally demonstrate three-slice, 4-ns long waveforms that highlight the bandwidth scalable nature of the optical transmitter. The various generated waveforms show that the key transmitter properties (i.e., packet length, modulation format, data rate, and modulation filter shape) are software definable, and that the optical transmitter is capable of acting as a flexible bandwidth transmitter.


Subject(s)
Refractometry/instrumentation , Signal Processing, Computer-Assisted/instrumentation , Telecommunications/instrumentation , Equipment Design , Equipment Failure Analysis
10.
Opt Express ; 19(26): B736-45, 2011 Dec 12.
Article in English | MEDLINE | ID: mdl-22274096

ABSTRACT

We demonstrate a flexible-bandwidth network testbed with a real-time, adaptive control plane that adjusts modulation format and spectrum-positioning to maintain quality of service (QoS) and high spectral efficiency. Here, low-speed supervisory channels and field-programmable gate arrays (FPGAs) enabled real-time impairment detection of high-speed flexible bandwidth channels (flexpaths). Using premeasured correlation data between the supervisory channel quality of transmission (QoT) and flexpath QoT, the control plane adapted flexpath spectral efficiency and spectral location based on link quality. Experimental demonstrations show a back-to-back link with a 360-Gb/s flexpath in which the control plane adapts to varying link optical signal to noise ratio (OSNR) by adjusting the flexpath's spectral efficiency (i.e., changing the flexpath modulation format) between binary phase-shift keying (BPSK), quaternary phase-shift keying (QPSK), and eight phase-shift keying (8PSK). This enables maintaining the data rate while using only the minimum necessary bandwidth and extending the OSNR range over which the bit error rate in the flexpath meets the quality of service (QoS) requirement (e.g. the forward error correction (FEC) limit). Further experimental demonstrations with two flexpaths show a control plane adapting to changes in OSNR on one link by changing the modulation format of the affected flexpath (220 Gb/s), and adjusting the spectral location of the other flexpath (120 Gb/s) to maintain a defragmented spectrum.

11.
Opt Express ; 17(20): 18171-7, 2009 Sep 28.
Article in English | MEDLINE | ID: mdl-19907607

ABSTRACT

We experimentally demonstrate a polarization-mode dispersion (PMD) monitoring technique that is insensitive to chromatic dispersion (CD) utilizing a polarizer and a low-speed detector for an 80-Gb/s polarization-multiplexed return-to-zero differential phase-shift-keying (pol-muxed RZ-DPSK) data channel. Measured RF power increment of 16.2 dB, which is insensitive to 0 approximately 100 ps/nm CD, is measured in the presence of the increasing differential group delay (DGD) from 0 to 12 ps. High-speed components are not required for monitoring the PMD on the pol-muxed data channel, which means that the proposed technique is potentially applicable to the higher speed pol-muxed data channels.


Subject(s)
Refractometry/instrumentation , Signal Processing, Computer-Assisted/instrumentation , Telecommunications/instrumentation , Transducers , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Microwaves , Reproducibility of Results , Sensitivity and Specificity
12.
Opt Express ; 17(18): 15911-25, 2009 Aug 31.
Article in English | MEDLINE | ID: mdl-19724590

ABSTRACT

This paper presents the concept of an optical transmitter based on optical arbitrary waveform generation (OAWG) capable of synthesizing Tb/s optical signals of arbitrary modulation format. Experimental and theoretical demonstrations in this paper include generation of data packet waveforms focusing on (a) achieving high spectral efficiencies in quadrature phase-shift keying (QPSK) and 16 quadrature amplitude modulation (16QAM) modulation formats, (b) generation of complex data waveform packets used for optical-label switching (OLS) consisting of a data payload and label on a carrier and subcarrier, and (c) repeatability and accuracy of duobinary (DB) data packet waveforms with BER measurements. These initial demonstrations are based on static OAWG, or line-by-line pulse shaping, to generate repeated waveforms of arbitrary shape. In addition to experimental and theoretical demonstrations of static OAWG, simulated results show dynamic OAWG, which involves encoding continuous data streams of arbitrary symbol sequence on data packet waveforms of arbitrary length.

SELECTION OF CITATIONS
SEARCH DETAIL
...