HCV, HIV AND HBV rapid test diagnosis in non-clinical outreach settings can be as accurate as conventional laboratory tests.

Point of care rapid diagnostic tests (POC-RDT) for Hepatitis C virus (HCV), Human Immunodeficiency virus (HIV) and Hepatitis B virus (HBV), are ideal for screening in non-clinical outreach settings as they can provide immediate results and facilitate diagnosis, allowing high risk population screening. The aim of this study was to compare POC-RDT with laboratory conventional tests. A total of 301 vulnerable evaluable subjects (drug users, migrants and homeless population) were recruited at a mobile screening unit in outreach settings in Madrid. Fingerprick whole blood capillary samples were tested using the SD BIOLINE HCV POC-RDT, Determine HIV Early Detect and Determine HBsAg 2, and the results were assessed against the LIAISON XL HCV, HIV and Murex-HBsAg-Quant, reference assays, respectively. The feasibility and user satisfaction of the POC-RDT were evaluated through a questionnaire. The resolved sensitivity and resolved specificity and their 95% confidence intervals (95% CI) were as follows, respectively: SD-BIOLINE-HCV: 98.8% (95% CI 93.4, 100.0) and 100.0% (95% CI 98.3, 100.0); Determine HIV Early Detect: 100% (95% CI 85.2, 100.0) and 100% (95% CI 98.7, 100); and Determine HBsAg 2: 66.7% (95% CI 9.4, 99.2) and 100.0% (95% CI 98.7, 100.0). As expected, the number of subjects with a confirmed positive result for HBsAg was very low (n = 4). Therefore, the analytical sensitivity has been evaluated in addition: The Determine HBsAg 2 test demonstrated 100% sensitivity for standard concentrations ≥ 0.125 IU/mL. The subject questionnaire yielded positive feedback for most subjects. The POC-RDT fingerprick blood collection method was well received, and the tests demonstrated a comparable clinical performance with conventional tests in outreach settings and vulnerable high-risk populations.

Hepatitis E genotype 3 genome: A comprehensive analysis of entropy, motif conservation, relevant mutations, and clade-associated polymorphisms.

Hepatitis E virus genotype 3 (HEV-3) is an EU/EEA emergent zoonosis. HEV-3 clades/subtypes have been described. Its genome contains ORF1, which encodes nonstructural proteins for virus replication, ORF2, the capsid protein, and ORF3, a multifunctional protein involved in virion pathogenesis. The study aims with respect to HEV-3 are to: (1) calculate genome entropy (excluding hypervariable region); (2) analyze the described motifs/mutations; (3) characterize clade/subtype genome polymorphisms. Seven hundred and five sequences from the GenBank database were used. The highest entropies were identified in zoonotic genotypes (HEV-3 and HEV-4) with respect to HEV-1 in X domain, RdRp, ORF2, and ORF3. There were statistically significant differences in the entropy between proteins, protease and ORF3 being the most variable and Y domain being the most conserved. Methyltransferase and Y domain motifs were completely conserved. By contrast, essential protease H581 residue and catalytic dyad exhibited amino acid changes in 1.8% and 0.4% of sequences, respectively. Several X domain amino acids were associated with clades. We found sequences with mutations in all helicase motifs except number IV. Helicase mutations related to increased virulence and/or fulminant hepatitis were frequent, the 1,110 residue being a typical HEV-3e and HEV-3f-A2 polymorphism. RdRp motifs III, V, VII also had high mutation rates. Motif III included residues that are polymorphisms of HEV-3e (F1449) and HEV-3 m (D1451). RdRp ribavirin resistance mutations were frequent, mainly 1479I (67.4, 100% in HEV-3efglmk) and 1634R/K (10.0%, almost 100% in HEV-3e). With respect to ORF2, 19/27 neutralization epitopes had mutations. The S80 residue in ORF3 presented mutations in 3.5% of cases. Amino acids in the ORF3-PSAP motif had high substitution rates, being more frequent in the first PSAP (44.8%) than in the second (1.5%). This is the first comprehensive analysis of the HEV-3 genome, aimed at improving our knowledge of the genome, and establishing the basis for future genotype-to-phenotype analysis, given that viral features associated with severity have not been explored in depth. Our results demonstrate there are important genetic differences in the studied genomes that sometimes affect significant viral structures, and constitute clade/subtype polymorphisms that may affect the clinical course or treatment efficacy.

Use of self-organizing maps for analyzing the behavior of canines displaced towards midline under interceptive treatment

BACKGROUND: Displaced maxillary permanent canine is one of the more frequent findings in canine eruption process and it's easy to be outlined and early diagnosed by means of x-ray images. Late diagnosis frequently needs surgery to rescue the impacted permanent canine. In many cases, interceptive treatment to redirect canine eruption is needed. However, some patients treated by interceptive means end up requiring fenestration to orthodontically guide the canine to its normal occlusal position. It would be interesting, therefore, to discover the dental characteristics of patients who will need additional surgical treatment to interceptive treatment. MATERIAL AND METHODS: To study the dental characteristics associated with canine impaction, conventional statistics have traditionally been used. This approach, although serving to illustrate many features of this problem, has not provided a satisfactory response or not provided an overall idea of the characteristics of these types of patients, each one of them with their own particular set of variables. Faced with this situation, and in order to analyze the problem of impaction despite interceptive treatment, we have used an alternative method for representing the variables that have an influence on this syndrome. This method is known as Self-Organizing Maps (SOM), a method used for analyzing problems with multiple variables. RESULTS: We analyzed 78 patients with a PMC angulation higher than 100ş. All of them were subject to interceptive treatment and in 21 cases it was necessary to undertake the above-mentioned fenestration to achieve the final eruption of the canine. CONCLUSIONS: In this study, we describe the process of debugging variables and selecting the appropriate number of cells in SOM so as to adequately visualize the problem posed and the dental characteristics of patients with regard to a greater or lesser probability of the need for fenestration

Use of multicolour fluorescence imaging for diagnosis of bacterial and fungal infection on zucchini by implementing machine learning.

Zucchini (Cucurbita pepo L.) is a cucurbitaceous plant ranking high in economic importance among vegetable crops worldwide. Pathogen infections cause alterations in plants primary and secondary metabolism that lead to a significant decrease in crop quality and yield. Such changes can be monitored by remote and proximal sensing, providing spatial and temporal information about the infection process. Remote sensing can also provide specific signatures of disease that could be used in phenotyping and to detect a pest, forecast its evolution and predict crop yield. In this work, metabolic changes triggered by soft rot (caused by Dickeya dadantii) and powdery mildew (caused by Podosphaera fusca) on zucchini leaves have been studied by multicolour fluorescence imaging and by thermography. The fluorescence parameter F520/F680 showed statistically significant differences between infected (with D. dadantii or P. fusca) and mock-control leaves during the whole period of study. Artificial neural networks, logistic regression analyses and support vector machines trained with a set of features characterising the histograms of F520/F680 images could be used as classifiers, discriminating between healthy and infected leaves. These results show the applicability of multicolour fluorescence imaging on plant phenotyping.

Influence of skeletal class in the morphology of cervical vertebrae: A study using cone beam computed tomography.

OBJECTIVES: To quantify the prevalence of cervical vertebrae anomalies and to analyze any association between them and skeletal malocclusions or head posture positions in the same study. MATERIALS AND METHODS: Two hundred forty patients who were attending the Department of Orthodontics of the University of Valencia for orthodontic treatment were selected and divided into three groups: skeletal Class I (control group, 0°

Absence of transmission from HIV-infected individuals with HAART to their heterosexual serodiscordant partners / Ausencia de transmisión del VIH desde individuos infectados y bajo TARGA a sus parejas heterosexuales serodiscordantes

BACKGROUND: Further studies are needed to evaluate the level of effectiveness and durability of HAART to reduce the risk of HIV sexual transmission in serodiscordant couples having unprotected sexual practices. METHODS: A cross-sectional study was conducted with prospective cohort of heterosexual HIV serodiscordant couples where the only risk factor for HIV transmission to the uninfected partner (sexual partner) was the sexual relationship with the infected partner (index case). HIV prevalence in sexual partners at enrolment and seroconversions in follow-up were compared by antiretroviral treatment in the index partner, HIV plasma viral load in index cases and sexual risk exposures in sexual partners. In each visit, an evaluation of the risks for HIV transmission, preventive counselling and screening for genitourinary infections in the sexual partner was performed, as well as the determination of the immunological and virological situation and antiretroviral treatment in the index case. RESULTS: At enrolment no HIV infection was detected in 202 couples where the index case was taking HAART. HIV prevalence in sexual partners was 9.6% in 491 couples where the index case was not taking antiretroviral treatment (p < 0.001). During follow-up there was no HIV seroconversion among 199 partners whose index case was taking HAART, accruing 7600 risky sexual exposures and 85 natural pregnancies. Among 359 couples whose index case was not under antiretroviral treatment, over 13,000 risky sexual exposures and 5 HIV seroconversions of sexual partners were recorded. The percentage of seroconversion among couples having risky sexual intercourse was 2.5 (95% confidence interval [CI]: 1.1-5.6) when the index case did not undergo antiretroviral treatment and zero (95% CI: 0-3.2) when the index case received HAART. CONCLUSIONS: The risk of sexual transmission of HIV from individuals with HAART to their heterosexual partners can become extremely low

INTRODUCCIÓN: Son necesarios más estudios que evalúen el nivel de efectividad del TARGA y su duración para prevenir la transmisión sexual del VIH en parejas serodiscordantes que tienen prácticas sexuales sin protección. MÉTODOS: Estudio transversal y cohorte prospectiva de parejas heterosexuales serodiscordantes al VIH en las cuales el único factor de riesgo para la transmisión del VIH al sujeto no infectado (contacto) fue la relación sexual con el sujeto infectado (caso índice). Se estudió la prevalencia del VIH al inicio y las seroconversiones durante el seguimiento comparándolas en función de si el caso índice recibía tratamiento antirretroviral, la carga viral plasmática del VIH del caso índice y las exposiciones sexuales de riesgo del contacto. En cada visita se realizó una evaluación de riesgos para el VIH, consejo preventivo y despistaje de infecciones genitourinarias en el contacto, y se determinó la situación inmunológica, virológica y el tratamiento antirretroviral del caso índice. RESULTADOS: Al reclutamiento no se detectó ninguna infección en las 202 parejas cuyo caso índice recibía TARGA, mientras que entre las 491 con caso índice sin tratamiento, la prevalencia fue del 9,6% (p < 0,001). Durante el seguimiento no hubo seroconversiones en 199 parejas con caso índice bajo TARGA, aunque tuvieron 7.600 exposiciones sexuales no protegidas y 85 gestaciones naturales. Entre las 359 parejas con caso índice sin tratamiento se registraron más de 13.000 exposiciones sexuales de riesgo y 5 seroconversiones. Cuando el caso índice no recibía tratamiento, el porcentaje de seroconversión en parejas con prácticas sexuales de riesgo fue 2,5% (IC 95%: 1,1-5,6) y cero cuando recibía TARGA (IC 95%: 0-3,2) CONCLUSIONES: El riesgo de transmisión sexual del VIH de personas tratadas con TARGA a sus parejas heterosexuales puede llegar a ser extremadamente bajo

A comparative study of the pharyngeal airway space, measured with cone beam computed tomography, between patients with different craniofacial morphologies.

PURPOSE: The present study aims to determine any existing association between airway dimensions, measured with cone beam computed tomography (CBCT), and the different patient craniofacial morphologies. MATERIAL AND METHODS: Sixty CBCT (Dental Picasso Master 3D) images, from patients treated at the Orthodontics Master at Valencia University were selected. The program InVivoDental 5.1 was used to visualize sections, analyze three-dimensional images, and perform airway measurements in the three planes of the space. Intra- and interobserver error methods were recorded. After that, measurements at three different levels of the airway (upper, medium, lower) were taken, in both the anteroposterior and transversal directions of the airway space. The area (mm(2)) of the airway space at the three levels was also measured. RESULTS: In the anteroposterior airway measurements, there were differences between the measurements by level. The magnitude of these differences depended on the skeletal pattern of the individual. In the transversal airway measurements and in the area airway measurements, there were no differences according to the skeletal pattern. However, in the transversal direction, measurements in the lower level were significantly higher than in the superior level in all cases. When measuring the area, significantly higher measurements in the upper level were recorded. The homogeneity between medium and lower levels decreased gradually from class I to class III subjects. CONCLUSIONS: No statistically significant results were observed that related the anteroposterior and vertical skeletal craniofacial morphology with airway dimensions, although some specific associations have been detected for certain airway levels or for pattern combinations.

New regression equations for predicting human teeth sizes.

INTRODUCTION: The aims of the study were; to evaluate the applicability of the Moyers and Tanaka-Johnston Methods to individuals with a Spanish ancestry, to propose new regression equations using the lower four permanent incisors as predictors for the sum of the widths of the lower permanent canine and premolars, and to compare the new data to those from other populations. METHODS: A total of 359 Spanish ancestry adolescents were selected. Their dental casts were measured using a 2D computerized system. Real teeth measurements were compared with those predicted using Moyers probability tables and Tanaka and Johnston equations, and standard regression equations were then developed. RESULTS: Results showed that Upper and Lower Canine and Premolar (UCPM, LCPM) predictions are quite different depending on the used method. Moyers tables can only be validly applied to a 75% percentile for the mandible in both, males and females, 85% in males and 90-92% in females. CONCLUSIONS: Moyers predictions tend to underestimate UCPM and LCPM whereas Tanaka-Johnston predictions tend to overestimate them. Equations for estimating the combined width of the unerupted canine and premolars were; Male: UCPM = 12.68 + 0.42 LI and LCPM = 11.71 + 0.44 LI. Female: UCPM = 12.06 + 0.43LI and LCPM = 10.71 + 0.46 LI.

Absence of transmission from HIV-infected individuals with HAART to their heterosexual serodiscordant partners.

BACKGROUND: Further studies are needed to evaluate the level of effectiveness and durability of HAART to reduce the risk of HIV sexual transmission in serodiscordant couples having unprotected sexual practices. METHODS: A cross-sectional study was conducted with prospective cohort of heterosexual HIV serodiscordant couples where the only risk factor for HIV transmission to the uninfected partner (sexual partner) was the sexual relationship with the infected partner (index case). HIV prevalence in sexual partners at enrolment and seroconversions in follow-up were compared by antiretroviral treatment in the index partner, HIV plasma viral load in index cases and sexual risk exposures in sexual partners. In each visit, an evaluation of the risks for HIV transmission, preventive counselling and screening for genitourinary infections in the sexual partner was performed, as well as the determination of the immunological and virological situation and antiretroviral treatment in the index case. RESULTS: At enrolment no HIV infection was detected in 202 couples where the index case was taking HAART. HIV prevalence in sexual partners was 9.6% in 491 couples where the index case was not taking antiretroviral treatment (p<0.001). During follow-up there was no HIV seroconversion among 199 partners whose index case was taking HAART, accruing 7600 risky sexual exposures and 85 natural pregnancies. Among 359 couples whose index case was not under antiretroviral treatment, over 13,000 risky sexual exposures and 5 HIV seroconversions of sexual partners were recorded. The percentage of seroconversion among couples having risky sexual intercourse was 2.5 (95% confidence interval [CI]: 1.1-5.6) when the index case did not undergo antiretroviral treatment and zero (95% CI: 0-3.2) when the index case received HAART. CONCLUSIONS: The risk of sexual transmission of HIV from individuals with HAART to their heterosexual partners can become extremely low.

Smile esthetics from odontology students' perspectives.

OBJECTIVES: To analyze the perception of smile esthetics and its alterations in dental degree students; to determine whether there are differences in that perception among students in different study years on those courses and between genders; and to determine if the circumstance of having received prior orthodontic treatment could influence that perception. MATERIAL AND METHODS: Students (n = 192) in different study years of the dental degree course at the University of Valencia, Spain, analyzed two photographs of a patient in which, by means of computer software, midline diastema, upper and lower midlines, crown length of the maxillary right central incisor, occlusal cant, and "gummy" smile were altered. Students assessed the photographs on a scale from 1 to 10. Statistical analyses for assessing each group's level of perception were carried out. RESULTS: After checking the validity of the study, it was observed that the students' ability to detect alterations in smile esthetics did not improve over their degree courses, given that the differences do not present a linear development. There were no differences between genders and between those who had or had not undergone an orthodontic treatment. CONCLUSIONS: There are no statistically significant differences between the results of students in different study years or between genders. The circumstance of having undergone prior orthodontic treatment is not a determining factor in the ability to perceive such anomalies.

A new 3D method for measuring cranio-facial relationships with cone beam computed tomography (CBCT)

Objectives: CBCT systems, with their high precision 3D reconstructions, 1:1 images and accuracy in locating cephalometric landmarks, allows us to evaluate measurements from craniofacial structures, so enabling us to replace the anthropometric methods or bidimensional methods used until now. The aims are to analyse cranio-facial relationships in a sample of patients who had previously undergone a CBCT and create a new 3D cephalometric method for assessing and measuring patients. Study Design: 90 patients who had a CBCT (i-Cat®) as a diagnostic register were selected. 12 cephalometric landmarks on the three spatial planes (X,Y,Z) were defined and 21 linear measurements were established. Using these measurements, 7 triangles were described and analysed. With the sides of the triangles: (CdR-Me-CdL); (FzR-Me-FzL); (GoR-N-GoL); and the Gl-Me distance, the ratios between them were analysed. In addition, 4 triangles in the mandible were measured (body: GoR-DB-Me and GoL-DB-Me and ramus: KrR-CdR-GoR and KrL-CdL-GoL). Results: When analyzing the sides of the CdR-Me-CdL triangle, it was found that the 69.33% of the patients could be considered symmetric. Regarding the ratios between the sides of the following triangles: CdR-Me-CdL, FzR-Me-FzL, GoR-N-GoL and the Gl-Me distance, it was found that almost all ratios were close to 1:1 except between the CdR-CdL side with respect the rest of the sides. With regard to the ratios of the 4 triangles of the mandible, it was found that the most symmetrical relationships were those corresponding to the sides of the body of the mandible and the most asymmetrical ones were those corresponding to the base of such triangles. Conclusions: A new method for assessing cranio-facial relationshps using CBCT has been established. It could be used for diverse purposes including diagnosis and treatment planning (AU)

Study between anb angle and Wits appraisal in cone beam computed tomography (CBCT)

Objectives: To analyse the ANB and Wits values and to study correlations between those two measurements and other measurements in diagnosing the anteroposterior maxilo-mandibular relationship with CBCT. Study Design: Ninety patients who had previously a CBCT (i-CAT®) as a diagnostic register were selected. A 3D cephalometry was designed using one software package, InVivo5®. This cephalometry included 3 planes of reference, 3 angle measurements and 1 linear measurement. The means and standard deviations of the mean of each measurement were assessed. After that, a Pearson's correlation coefficient has been performed to analyse the significance of each relationship. Results: When classifying the sample according to the anteroposterior relationship, the values obtained of ANB (Class I: 53%; Class II: 37%; Class III: 10%) and Wits (Class I: 35%; Class II: 56%; Class III: 9%) did not coincide, except for the Class III group. However, of the patients classified differently (Class I and Class II patients) by ANB and Wits, a high percentage of individuals (n=22; 49%), had a mesofacial pattern with a mandibular plane angle within normal values. A correlation has been found between ANB and Wits (r=0,262), occlusal plane angle and ANB (r=0,426), and mandibular plane angle and Wits (r=0,242). No correlation was found between either Wits or ANB in relation with the age of the individuals. Conclusions: ANB and Wits must be included in 3D cephalometric analyses as both are necessary to undertake a more accurate diagnosis of the maxillo-mandibular relationship of the patients (AU)

Study between anb angle and Wits appraisal in cone beam computed tomography (CBCT).

OBJECTIVES: To analyse the ANB and Wits values and to study correlations between those two measurements and other measurements in diagnosing the anteroposterior maxilo-mandibular relationship with CBCT. STUDY DESIGN: Ninety patients who had previously a CBCT (i-CAT®) as a diagnostic register were selected. A 3D cephalometry was designed using one software package, InVivo5®. This cephalometry included 3 planes of reference, 3 angle measurements and 1 linear measurement. The means and standard deviations of the mean of each measurement were assessed. After that, a Pearson's correlation coefficient has been performed to analyse the significance of each relationship. RESULTS: When classifying the sample according to the anteroposterior relationship, the values obtained of ANB (Class I: 53%; Class II: 37%; Class III: 10%) and Wits (Class I: 35%; Class II: 56%; Class III: 9%) did not coincide, except for the Class III group. However, of the patients classified differently (Class I and Class II patients) by ANB and Wits, a high percentage of individuals (n=22; 49%), had a mesofacial pattern with a mandibular plane angle within normal values. A correlation has been found between ANB and Wits (r=0,262), occlusal plane angle and ANB (r=0,426), and mandibular plane angle and Wits (r=0,242). No correlation was found between either Wits or ANB in relation with the age of the individuals. CONCLUSIONS: ANB and Wits must be included in 3D cephalometric analyses as both are necessary to undertake a more accurate diagnosis of the maxillo-mandibular relationship of the patients.

A new 3D method for measuring cranio-facial relationships with cone beam computed tomography (CBCT).

OBJECTIVES: CBCT systems, with their high precision 3D reconstructions, 1:1 images and accuracy in locating cephalometric landmarks, allows us to evaluate measurements from craniofacial structures, so enabling us to replace the anthropometric methods or bidimensional methods used until now. The aims are to analyse cranio-facial relationships in a sample of patients who had previously undergone a CBCT and create a new 3D cephalometric method for assessing and measuring patients. STUDY DESIGN: 90 patients who had a CBCT (i-Cat®) as a diagnostic register were selected. 12 cephalometric landmarks on the three spatial planes (X,Y,Z) were defined and 21 linear measurements were established. Using these measurements, 7 triangles were described and analysed. With the sides of the triangles: (CdR-Me-CdL); (FzR-Me-FzL); (GoR-N-GoL); and the Gl-Me distance, the ratios between them were analysed. In addition, 4 triangles in the mandible were measured (body: GoR-DB-Me and GoL-DB-Me and ramus: KrR-CdR-GoR and KrL-CdL-GoL). RESULTS: When analyzing the sides of the CdR-Me-CdL triangle, it was found that the 69.33% of the patients could be considered symmetric. Regarding the ratios between the sides of the following triangles: CdR-Me-CdL, FzR-Me-FzL, GoR-N-GoL and the Gl-Me distance, it was found that almost all ratios were close to 1:1 except between the CdR-CdL side with respect the rest of the sides. With regard to the ratios of the 4 triangles of the mandible, it was found that the most symmetrical relationships were those corresponding to the sides of the body of the mandible and the most asymmetrical ones were those corresponding to the base of such triangles. CONCLUSIONS: A new method for assessing cranio-facial relationships using CBCT has been established. It could be used for diverse purposes including diagnosis and treatment planning.

A study on the reproducibility of cephalometric landmarks when undertaking a three-dimensional (3D) cephalometric analysis

Objectives: Cone Beam Computerized Tomography (CBCT) allows the possibility of modifying some of thediagnostic tools used in orthodontics, such as cephalometry. The first step must be to study the characteristics ofthese devices in terms of accuracy and reliability of the most commonly used landmarks. The aims were 1- Toassess intra and inter-observer reliability in the location of anatomical landmarks belonging to hard tissues of theskull in images taken with a CBCT device, 2- To determine which of those landmarks are more vs. less reliableand 3- To introduce planes of reference so as to create cephalometric analyses appropriated to the 3D reality.Study design: Fifteen patients who had a CBCT (i-CAT®) as a diagnostic register were selected. To assess thereproducibility on landmark location and the differences in the measurements of two observers at different times,41 landmarks were defined on the three spatial axes (X,Y,Z) and located. 3.690 measurements were taken and, aseach determination has 3 coordinates, 11.070 data were processed with SPSS® statistical package. To discover thereproducibility of the method on landmark location, an ANOVA was undertaken using two variation factors: time(t1, t2 and t3) and observer (Ob1 and Ob2) for each axis (X, Y and Z) and landmark. The order of the CBCT scanssubmitted to the observers (Ob1, Ob2) at t1, t2, and t3, were different and randomly allocated. Multiple comparisons were undertaken using the Bonferroni test. The intra- and inter-examiner ICC's were calculated. Results: Intra- and inter-examiner reliability was high, both being ICC ≥ 0.99, with the best frequency on axis Z. Conclusions: The most reliable landmarks were: Nasion, Sella, Basion, left Porion, point A, anterior nasal spine, Pogonion, Gnathion, Menton, frontozygomatic sutures, first lower molars and upper and lower incisors. Those with less reliability were the supraorbitals, right zygion and posterior nasal spine (AU)

Evaluation of the validity of the Bolton Index using cone-beam computed tomography (CBCT)

Aims: To evaluate the reliability and reproducibility of calculating the Bolton Index using cone-beam computed tomography (CBCT), and to compare this with measurements obtained using the 2D Digital Method. Material and Methods: Traditional study models were obtained from 50 patients, which were then digitized in order to be able to measure them using the Digital Method. Likewise, CBCTs of those same patients were undertaken using the Dental Picasso Master 3D® and the images obtained were then analysed using the InVivoDental programme. Results: By determining the regression lines for both measurement methods, as well as the difference between both of their values, the two methods are shown to be comparable, despite the fact that the measurements analysed presented statistically significant differences. Conclusions: The three-dimensional models obtained from the CBCT are as accurate and reproducible as the digital models obtained from the plaster study casts for calculating the Bolton Index. The differences existing between both methods were clinically acceptable (AU)

Effects of endodontic treatment on apparent Young's modulus of human teeth: in vitro study using speckle interferometry.

The introduction of new techniques for endodontic procedures requires the analysis of the biomechanical behavior of dental structures. Digital speckle shearing pattern interferometry (DSSPI) is a nondestructive optical measuring technique that allows one to directly quantify deformations in teeth that are subjected to stress. DSSPI technique was applied to measure small deformations caused by flexion in different types of teeth. The test was carried out both before and after endodontic treatment with the ProTaper method in order to evaluate the variation of dental elasticity, taking into the account the type of tooth and the endodontic treatment. The results obtained show that dental elasticity, established by means of the apparent Young's modulus, before and after the endodontic treatment, differs between incisors and premolars. The endodontic process does not affect dental elasticity (p>0.7). Specifically, 57.1% of central incisors and 56.3% of second premolars slightly increase their elasticity after the endodontic process. In turn, 42.9% of central incisors and 43.7% of second premolars slightly decrease elasticity. The endodontic treatment especially affects the "neutral fibre"; therefore, there is little influence on elasticity by flexion. However, after finishing the process, the channel was restored with material, which can slightly increase tooth elasticity in some cases.

Evaluation of the validity of the Bolton Index using cone-beam computed tomography (CBCT).

AIMS: To evaluate the reliability and reproducibility of calculating the Bolton Index using cone-beam computed tomography (CBCT), and to compare this with measurements obtained using the 2D Digital Method. MATERIAL AND METHODS: Traditional study models were obtained from 50 patients, which were then digitized in order to be able to measure them using the Digital Method. Likewise, CBCTs of those same patients were undertaken using the Dental Picasso Master 3D® and the images obtained were then analysed using the InVivoDental programme. RESULTS: By determining the regression lines for both measurement methods, as well as the difference between both of their values, the two methods are shown to be comparable, despite the fact that the measurements analysed presented statistically significant differences. CONCLUSIONS: The three-dimensional models obtained from the CBCT are as accurate and reproducible as the digital models obtained from the plaster study casts for calculating the Bolton Index. The differences existing between both methods were clinically acceptable.

Long-term stability of surgical-orthodontic correction of class III malocclusions with long-face syndrome

Objectives: In the first place, to evaluate skeletal changes of the maxilla and mandible induced by surgical-orthodontic correction of malocclusions class III with long-face syndrome and secondly, to analyze the stability of these skeletal changes in the long term (more than 6 years). Design of Study: A retrospective, unicentric and longitudinal study of 19 patients who had undergone surgical and orthodontic therapy for class III skeletal malocclusion with long-face syndrome was undertaken. A cephalometric analysis based on 8 angle measurements, and statistical analyses at three different points in time (before orthodontic treatment, after orthognathic surgery and after a retention period of at least 6 years) were carried out. Results: The changes produced following surgery show that, with the exception of the maxillary plane and the facial axis, all other variables presented changes of great statistical difference. Conclusions: Skeletal changes after orthodontic-surgical correction present maxillary advance, mandibular regression and mandibular anterorotation. The angles that represent the mandibular vertical position (ramus angle, goniac angle and mandibular plane angle) showed statistically significant relapses and no stability in contrast to the facial axis (AU)

No disponible