ABSTRACT
Attaining viable thermoelectric cooling at cryogenic temperatures is of considerable fundamental and technological interest for electronics and quantum materials applications. In-device temperature control can provide more efficient and precise thermal environment management compared with conventional global cooling. The application of a current and perpendicular magnetic field gives rise to cooling by generating electron-hole pairs on one side of the sample and to heating due to their recombination on the opposite side, which is known as the Ettingshausen effect. Here we develop nanoscale cryogenic imaging of the magneto-thermoelectric effect and demonstrate absolute cooling and an Ettingshausen effect in exfoliated WTe2 Weyl semimetal flakes at liquid He temperatures. In contrast to bulk materials, the cooling is non-monotonic with respect to the magnetic field and device size. Our model of magneto-thermoelectricity in mesoscopic semimetal devices shows that the cooling efficiency and the induced temperature profiles are governed by the interplay between sample geometry, electron-hole recombination length, magnetic field, and flake and substrate heat conductivities. The observations open the way for the direct integration of microscopic thermoelectric cooling and for temperature landscape engineering in van der Waals devices.
ABSTRACT
Vortices are the hallmarks of hydrodynamic flow. Strongly interacting electrons in ultrapure conductors can display signatures of hydrodynamic behaviour, including negative non-local resistance1-4, higher-than-ballistic conduction5-7, Poiseuille flow in narrow channels8-10 and violation of the Wiedemann-Franz law11. Here we provide a visualization of whirlpools in an electron fluid. By using a nanoscale scanning superconducting quantum interference device on a tip12, we image the current distribution in a circular chamber connected through a small aperture to a current-carrying strip in the high-purity type II Weyl semimetal WTe2. In this geometry, the Gurzhi momentum diffusion length and the size of the aperture determine the vortex stability phase diagram. We find that vortices are present for only small apertures, whereas the flow is laminar (non-vortical) for larger apertures. Near the vortical-to-laminar transition, we observe the single vortex in the chamber splitting into two vortices; this behaviour is expected only in the hydrodynamic regime and is not anticipated for ballistic transport. These findings suggest a new mechanism of hydrodynamic flow in thin pure crystals such that the spatial diffusion of electron momenta is enabled by small-angle scattering at the surfaces instead of the routinely invoked electron-electron scattering, which becomes extremely weak at low temperatures. This surface-induced para-hydrodynamics, which mimics many aspects of conventional hydrodynamics including vortices, opens new possibilities for exploring and using electron fluidics in high-mobility electron systems.
ABSTRACT
The effect of high pressure (up to 8 GPa) on normal and superconducting state properties of PrFeAsO0.6F0.12, an 1111-type iron based superconductor close to optimal doped region, has been investigated by measuring the temperature dependence of resistivity. Initially, the superconducting transition temperature (T c ) is observed to increase slowly by about 1 K as pressure (P) increases from 0 to 1.3 GPa. With further increase in pressure above 1.3 GPa, T c decreases at the rate of ~1.5 K/GPa. The normal-state resistivity decreases monotonically up to 8 GPa. We have also measured the pressure dependence of magnetization (M) on the same piece of PrFeAsO0.6F0.12 sample up to 1.1 GPa and observed T c as well as the size of the Meissner signal to increase with pressure in this low-pressure region. In contrast, for an over-doped PrFeAsO0.6F0.14 sample, magnetization measurements up to 1.06 GPa show that both T c and the Meissner signal decrease with pressure. The present study clearly reveals two distinct regions in the dome-shaped (T c -P) phase diagram of PrFeAsO0.6F0.12.
