Symptomatic duodenal perforation by a Bird's Nest vena cava filter.

This case describes a patient with a permanent Bird's Nest inferior vena cava filter in the setting of spinal cord injury and paraplegia who presented with epigastric pain resulting from duodenal perforation of his filter. After confirming that the patient was stable hemodynamically with normal laboratory values, he underwent open exploration with trimming of the extraluminal struts and wires, leaving the intact filter in place, with resolution of his pain. Although percutaneous removal of inferior vena cava filters is preferred for retrievable filters, this case demonstrates the safety and efficacy of open surgical management for permanent filters, not designed for retrieval.

Sacral spinous processes: a morphologic classification and biomechanical characterization of strength.

BACKGROUND: There has been increasing interest in using the lumbosacral spinous processes for fixation as a less invasive alternative to transpedicular instrumentation. Alhough prior studies have described the appearance and biomechanics of lumbar spinous processes, few have evaluated the dimensions, morphology, or strength of the sacral spinous processes. PURPOSE: The goals of this study were to characterize the morphology of the S1 spinous process and biomechanical strength of the S1 spinous process when loaded in a cranial direction. STUDY DESIGN: This study was performed as both an analysis of radiographic data and biomechanical testing of cadaveric specimens. METHODS: Lumbosacral spine radiographs and computed tomography scans of 20 patients were evaluated for visibility and morphology of the S1 spinous process. S1 spinous process length, height, and size of the L5-S1 segment were measured. Additionally, 13 cadaveric lumbosacral spinal segments were obtained for biomechanical testing and morphologic analysis. Specimens were loaded at the S1 spinous process in a cranial direction via a strap, simulating resistance to a flexion moment applied across the L5-S1 segment. Peak load to failure, displacement, and mode of failure were recorded. RESULTS: The S1 spinous process was clearly visible on lateral radiographs in only 10% of patients. Mean spinous process length (anterior-posterior) was 11.6 mm while mean spinous process height (cranial-caudal) was 23.1 mm. We identified six different morphologic subtypes of the S1 spinous process: fin, lumbar type, fenestrated, fused, tubercle, and spina bifida occulta. During tension loading of the S1 spinous process in the cephalad direction, mean peak load to failure was 439N, with 92% of specimens failing by fracture through the spinous process. CONCLUSIONS: This is the first study evaluating sacral spinous process morphology, visibility, and biomechanical strength for potential instrumentation. Compared with lumbar spinous processes, sacral spinous processes are smaller with more variable morphology but have similar peak load to failure. For ideal visualization of morphology and suitability for interspinous fixation,preoperative three-dimensional imaging may be a valuable tool over plain radiographs.

Compressive preload reduces segmental flexion instability after progressive destabilization of the lumbar spine.

STUDY DESIGN: Biomechanical human cadaveric study. OBJECTIVE: We hypothesized that increasing compressive preload will reduce the segmental instability after nucleotomy, posterior ligament resection, and decompressive surgery. SUMMARY OF BACKGROUND DATA: The human spine experiences significant compressive preloads in vivo due to spinal musculature and gravity. Although the effect of destabilization procedures on spinal motion has been studied, the effect of compressive preload on the motion response of destabilized, multisegment lumbar spines has not been reported. METHODS: Eight human cadaveric spines (L1-sacrum, 51.4 ± 14.1 yr) were tested intact, after L4-L5 nucleotomy, after interspinous and supraspinous ligaments transection, and after midline decompression (bilateral laminotomy, partial medial facetectomy, and foraminotomy). Specimens were loaded in flexion (8 Nm) and extension (6 Nm) under 0-N, 200-N, and 400-N compressive follower preload. L4-L5 range of motion (ROM) and flexion stiffness in the high-flexibility zone were analyzed using repeated-measures analysis of variance and multiple comparisons with the Bonferroni correction. RESULTS: With a fixed set of loading conditions, a progressive increase in segmental ROM along with expansion of the high-flexibility zone (decrease of flexion stiffness) was noted with serial destabilizations. Application of increasing compressive preload did not substantially change segmental ROM, but did significantly increase the segmental stiffness in the high-flexibility zone. In the most destabilized condition, 400-N preload did not return the segmental stiffness to intact levels. CONCLUSION: Anatomical alterations representing degenerative and iatrogenic instabilities are associated with significant increases in segmental ROM and decreased segmental stiffness. Although application of compressive preload, mimicking the effect of increased axial muscular activity, significantly increased the segmental stiffness, it was not restored to intact levels; thereby suggesting that core strengthening alone may not compensate for the loss of structural stability associated with midline surgical decompression. This suggests that there may be a role for surgical implants or interventions that specifically increase flexion stiffness and limit flexion ROM to counteract the iatrogenic instability resulting from surgical decompression. LEVEL OF EVIDENCE: N/A.

Impact magnitudes applied by surgeons and their importance when applying the femoral head onto the Morse taper for total hip arthroplasty.

INTRODUCTION: This study was designed to test whether the number of impacts, the experience of the surgeon or impact force made significant difference in pull off forces. MATERIALS AND METHODS: The forces applied by 10 orthopaedic surgeons (five residents and five attending staff) to impact the femoral head onto the trunnion of a femoral component were recorded. The resultant forces were then divided into four energy levels and compared to determine if the number of impacts would make a difference in pull off strength. RESULTS: No significant differences existed between the resident versus attending groups in magnitude of force applied. Through ANOVA testing, it was found that at each of the energy levels, multiple blows demonstrated a significant pull off strength difference compared to a single blow. Increased pull off force was also noted when the magnitude of force of the applied blows was increased. CONCLUSION: We recommend at least two firm, axially aligned blows to impact the femoral head onto the trunnion intra-operatively.

Biomechanical and histologic evaluation of the Norian craniofacial repair system and Norian Craniofacial Repair System Fast Set Putty in the long-term reconstruction of full-thickness skull defects in a sheep model.

BACKGROUND: The purpose of this study was to investigate the long-term (12 months) strength and osteoconductive properties of two forms of carbonated calcium phosphate cements (i.e., the Norian Craniofacial Repair System and Norian Craniofacial Repair System Fast Set Putty) and to compare these two bone cement forms to an autogenous cranial bone graft in a full-thickness skull defect adult sheep model. METHOD: Twenty-six sheep were assigned to one of eight groups (n = 3 per group). A 4.5-cm2 full-thickness defect was created in the right and left parietal bones. Reconstruction was performed with a full-thickness cranial bone autograft, the Craniofacial Repair System, or Fast Set Putty. Skull samples were harvested at day 1, 6 months, and 12 months. Biomechanical testing was performed using a vertical drop test. RESULTS: Although the Craniofacial Repair System and Fast Set Putty osseointegrated fully, there was little osteoconduction at 12 months. The Craniofacial Repair System was the weakest reconstruction, presenting the lowest peak force transmission and the highest displacement at 12 months. Fast Set Putty showed significantly higher values for peak force transmission and lower displacement when compared with the Craniofacial Repair System. CONCLUSIONS: The Craniofacial Repair System progressively lost strength over the course of this study. Fast Set Putty demonstrated greater strength and rigidity than the Craniofacial Repair System. Both implants had limited bone ingrowth from defect borders, but both cements osteointegrated completely. Bone grafts regained biostructural characteristics and strength similar to those of intact bone and clinically performed the same in this sheep model.