Modified Graphene Oxide-Incorporated Thin-Film Composite Hollow Fiber Membranes through Interface Polymerization on Hydrophilic Substrate for CO2 Separation.

Thin-film composite mixed matrix membranes (CMMMs) were fabricated using interfacial polymerization to achieve high permeance and selectivity for CO2 separation. This study revealed the role of substrate properties on performance, which are not typically considered important. In order to enhance the affinity between the substrate and the coating solution during interfacial polymerization and increase the selectivity of CO2, a mixture of polyethylene glycol (PEG) and dopamine (DOPA) was subjected to a spinning process. Then, the surface of the substrate was subjected to interfacial polymerization using polyethyleneimine (PEI), trimesoyl chloride (TMC), and sodium dodecyl sulfate (SDS). The effect of adding SDS as a surfactant on the structure and gas permeation properties of the fabricated membranes was examined. Thin-film composite hollow fiber membranes containing modified graphene oxide (mGO) were fabricated, and their characteristics were analyzed. The membranes exhibited very promising separation performance, with CO2 permeance of 73 GPU and CO2/N2 selectivity of 60. From the design of a membrane substrate for separating CO2, the CMMMs hollow fiber membrane was optimized using the active layer and mGO nanoparticles through interfacial polymerization.

Selective ion transport through three-dimensionally interconnected nanopores of quaternized block copolymer membranes for energy harvesting application.

A concentration gradient in an aqueous solution is a promising source of energy that can be converted into electrical energy by an ion-exchange polymer membrane. In concentration-gradient energy harvesters, ion transport through nanoporous channels is an emerging approach to enhance the energy conversion efficiency. Since massive but selective ion transport could be realized through nanochannels, the theoretical calculations predicted that nanoporous membranes can extract significantly larger energy than the conventional non-structured membranes. In this regard, scientists in the field have attempted to produce nanoporous membranes on a macroscopic scale based on 1D, 2D, and 3D materials. However, the fabrication of nanoporous membranes is often accompanied by technical difficulties, which entails high production cost, low throughput, and poor scalability. In this study, we took advantage of the self-segregating properties of block copolymers (BCPs) to address these issues. In particular, the non-solvent-induced phase separation method has been utilized to produce three-dimensionally interconnected nanopores within BCP membranes. In addition, the neutral BCP nanopores' surface was modified with positive charges to allow selective diffusion of anions in concentration-gradient cells. By mounting the porous BCP membranes between two aqueous solutions with different concentrations, we studied the BCP-membrane-mediated energy-harvesting performance.

Development of a live attenuated trivalent porcine rotavirus A vaccine against disease caused by recent strains most prevalent in South Korea.

Porcine rotaviruses cause severe economic losses in the Korean swine industry due to G- and P-genotype mismatches between the predominant field and vaccine strains. Here, we developed a live attenuated trivalent porcine group A rotavirus vaccine using 80 cell culture passages of the representative Korean predominant strains G8P[7] 174-1, G9P[23] PRG942, and G5P[7] K71. Vaccination with the trivalent vaccine or its individual components induced no diarrhea during the first 2 weeks post-vaccination, i.e., the vaccines were attenuated. Challenge of trivalent-vaccinated or component-vaccinated piglets with homologous virulent strain(s) did not induce diarrhea for 2 weeks post-challenge. Immunization with the trivalent vaccine or its individual components also alleviated the histopathological lesions in the small intestines caused by challenge with the corresponding original virulent strain(s). Fecal secretory IgAs specific for each of vaccine strains were detected starting at 14 days post-vaccination (dpv), and IgA levels gradually increased up to 28 dpv. Oral immunization with the trivalent vaccine or its individual components induced high levels of serum virus-neutralizing antibody by 7 dpv. No diarrhea was observed in any experimental piglets during five consecutive passages of each vaccine strain. Our data indicated that the live attenuated trivalent vaccine was safe and effective at protecting piglets from diarrhea induced by challenge exposure of homologous virulent strains. This trivalent vaccine will potentially contribute toward controlling porcine rotavirus disease in South Korea and other countries where rotavirus infections with similar G and P genotypes are problematic.

Early Porcine Sapovirus Infection Disrupts Tight Junctions and Uses Occludin as a Coreceptor.

The genus Sapovirus belongs to the family Caliciviridae, and its members are common causative agents of severe acute gastroenteritis in both humans and animals. Some caliciviruses are known to use either terminal sialic acids or histo-blood group antigens as attachment factors and/or cell surface proteins, such as CD300lf, CD300ld, and junctional adhesion molecule 1 of tight junctions (TJs), as receptors. However, the roles of TJs and their proteins in sapovirus entry have not been examined. In this study, we found that porcine sapovirus (PSaV) significantly decreased transepithelial electrical resistance and increased paracellular permeability early in infection of LLC-PK cells, suggesting that PSaV dissociates TJs of cells. This led to the interaction between PSaV particles and occludin, which traveled in a complex into late endosomes via Rab5- and Rab7-dependent trafficking. Inhibition of occludin using small interfering RNA (siRNA), a specific antibody, or a dominant-negative mutant significantly blocked the entry of PSaV. Transient expression of occludin in nonpermissive Chinese hamster ovary (CHO) cells conferred susceptibility to PSaV, but only for a limited time. Although claudin-1, another TJ protein, neither directly interacted nor was internalized with PSaV particles, it facilitated PSaV entry and replication in the LLC-PK cells. We conclude that PSaV particles enter LLC-PK cells by binding to occludin as a coreceptor in PSaV-dissociated TJs. PSaV and occludin then form a complex that moves to late endosomes via Rab5- and Rab7-dependent trafficking. In addition, claudin-1 in the TJs opened by PSaV infection facilitates PSaV entry and infection as an entry factor.IMPORTANCE Sapoviruses (SaVs) cause severe acute gastroenteritis in humans and animals. Although they replicate in intestinal epithelial cells, which are tightly sealed by apical-junctional complexes, such as tight junctions (TJs), the mechanisms by which SaVs hijack TJs and their proteins for successful entry and infection remain largely unknown. Here, we demonstrate that porcine SaVs (PSaVs) induce early dissociation of TJs, allowing them to bind to the TJ protein occludin as a functional coreceptor. PSaVs then travel in a complex with occludin into late endosomes through Rab5- and Rab7-dependent trafficking. Claudin-1, another TJ protein, does not directly interact with PSaV but facilitates the entry of PSaV into cells as an entry factor. This work contributes to our understanding of the entry of SaV and other caliciviruses into cells and may aid in the development of efficient and affordable drugs to treat SaV infections.

Phosphatidylinositol 3-Kinase/Akt and MEK/ERK Signaling Pathways Facilitate Sapovirus Trafficking and Late Endosomal Acidification for Viral Uncoating in LLC-PK Cells.

Sapovirus, an important cause of acute gastroenteritis in humans and animals, travels from the early to the late endosomes and requires late endosomal acidification for viral uncoating. However, the signaling pathways responsible for these viral entry processes remain unknown. Here we demonstrate the receptor-mediated early activation of phosphatidylinositol 3-kinase (PI3K)/Akt and mitogen-activated protein extracellular signal-regulated kinase/extracellular signal-regulated kinase (MEK/ERK) signaling pathways involved in sapovirus entry processes. Both signaling pathways were activated during the early stage of porcine sapovirus (PSaV) infection. However, depletion of the cell surface carbohydrate receptors by pretreatment with sodium periodate or neuraminidase reduced the PSaV-induced early activation of these signaling pathways, indicating that PSaV binding to the cell surface carbohydrate receptors triggered these cascades. Addition of bile acid, known to be essential for PSaV escape from late endosomes, was also found to exert a stiffening effect to stimulate both pathways. Inhibition of these signaling pathways by use of inhibitors specific for PI3K or MEK or small interfering RNAs (siRNAs) against PI3K or MEK resulted in entrapment of PSaV particles in early endosomes and prevented their trafficking to late endosomes. Moreover, phosphorylated PI3K and ERK coimmunoprecipitated subunit E of the V-ATPase proton pump that is important for endosomal acidification. Based on our data, we conclude that receptor binding of PSaV activates both PI3K/Akt and MEK/ERK signaling pathways, which in turn promote PSaV trafficking from early to late endosomes and acidification of late endosomes for PSaV uncoating. These signaling cascades may provide a target for potent therapeutics against infections by PSaV and other caliciviruses.IMPORTANCE Sapoviruses cause acute gastroenteritis in both humans and animals. However, the host signaling pathway(s) that facilitates host cell entry by sapoviruses remains largely unknown. Here we demonstrate that porcine sapovirus (PSaV) activates both PI3K/Akt and MEK/ERK cascades at an early stage of infection. Removal of cell surface receptors decreased PSaV-induced early activation of both cascades. Moreover, blocking of PI3K/Akt and MEK/ERK cascades entrapped PSaV particles in early endosomes and prevented their trafficking to the late endosomes. PSaV-induced early activation of PI3K and ERK molecules further mediated V-ATPase-dependent late endosomal acidification for PSaV uncoating. This work unravels a new mechanism by which receptor-mediated early activation of both cascades may facilitate PSaV trafficking from early to late endosomes and late endosomal acidification for PSaV uncoating, which in turn can be a new target for treatment of sapovirus infection.

Fast response and transparent optically isotropic liquid crystal diffraction grating.

We have demonstrated an electrically tunable less polarization sensitive and fast response nanostructured polymer dispersed liquid crystal (nano-PDLC) diffraction grating. Fabricated nano-PDLC is optically transparent in visible wavelength regime. The optical isotropic nature was increased by minimizing the liquid crystal droplet size below visible wavelength thereby eliminated scattering. Diffraction properties of in-plane switching (IPS) and fringe-field switching (FFS) cells were measured and compared with one another up to four orders. We have obtained a pore-type polymer network constructed by highly interlinked polymer beads at which the response time is improved by strong interaction of liquid crystal molecules with polymer beads at interface. The diffraction pattern obtained by transparent nano-PDLC film has several interesting properties such as less polarization dependence and fast response. This device can be used as transparent tunable diffractor along with other photonic application.

Utilization of the Donnan potential induced by reverse salt flux in pressure retarded osmosis systems.

Pressure retarded osmosis (PRO) generates energy from salinity gradients. Reverse salt flux through a semi-permeable PRO membrane reduces the energy efficiency. We demonstrate for the first time the direct conversion of the reverse salt flux into electrochemical potential, recovering >7% positive net power using a single electrochemical PRO membrane.

Electrical, Optical, and Thermal Behaviors of Transparent Film Heater Made of Reduced Graphene Oxide.

The electrical conductivity and the thermal performance of the films made of reduced graphene oxide (rGO) spray-coated on polycarbonate substrate were investigated. The electrical conductivity and the transmittance of 10 times spray coated film made from the solution with 0.08 wt% of rGO, 0.16 wt% of surfactant were 30 komega/sq and 64%, respectively. The steady-state temperature of the films increased from 25 degrees C for 40 komega/sq to 100 degrees C for 490 omega/sq at an applied voltage of 110 V. The heat transfer coefficient of the rGO coated film, a, was obtained as 139 W/m2 K using the model equation based on the thermal balance, which includes Joule heating convectional, and radiative heat transfers. The transmittance of the films decreased continuously from 73% with the increase of surface resistivity.

pH-dependent sustained release characteristics of disulfide polymers prepared by simple thermal polymerization.

Biocompatible polymers have played an integral role in the advancement of drug delivery systems. The discovery of a novel polymer with innovative properties can provide great opportunities to enhance drug efficacy as well as reduce side effects. In this study, a novel disulfide polymer was synthesized and characterized. Its monomer is alpha-lipoic acid (ALA), which is synthesized in all cells in the human body. The disulfide polymer was obtained by the simple thermal polymerization of crystalline particles at a temperature higher than its melting point, followed by precipitation purification. It had rubbery and sticky characteristics. In vitro release tests demonstrated that the disulfide polymer had both pH-dependent degradation and related sustained release profiles, with a degraded form of ALA. Therefore, this novel class of responsive polymers that can be prepared by simple thermal polymerization has pronounced potential to contribute to future drug delivery systems.

Monodisperse red blood cell-like particles via consolidation of charged droplets.

Recently, researchers have tried to produce non-spherical and anisotropic particles to be used in the next generation of multi-functional materials. Of key interest is the red blood cell-like particle. The torus structure was produced under the relatively fast consolidation of monodisperse droplets, and its parameters were found to be tunable by temperature as well as solvent type and concentration. The observation of consolidation demonstrated that the polymers were accumulated and solidified in the torus structure, naturally, whereas there was the critical droplet size to induce the asymmetry diffusivities. The torus structures could be simply tuned by the flow rate and concentration. The coaxial nozzle system produced the core/shell torus particles. These results state that the consolidation mechanism can hold important clues to enhance the range of tuning capabilities.

Lipoic acid nanoparticles: effect of polymeric stabilizer on appetite suppression.

Alpha-lipoic acid (ALA), which is common in the human body, is efficacious in appetite suppression. However, its typical formulations of salt or micronized crystals cannot satisfy the desired bioavailability requirements for appetite suppression due to low absorption and a short plasma half-life. Herein, we describe a new ALA nanoparticulate formulation produced by nano-comminution using polymeric stabilizers, such as hydroxypropyl cellulose, Pluronic F127, and polyvinylpyrrolidone. Nanoparticles of similar sizes did not show any remarkable differences in the in vitro release profiles. However, the in vivo results from food intake studies in mice demonstrated that the hydroxypropyl cellulose case had the largest improved efficacy among the three polymeric stabilizer cases. Compared to the nanosuspension formulations, the powder formulations of nanoparticles had improved efficacy in reducing food intake for six hours, possibly because of the delayed release kinetics. Therefore, the ALA powder formulation of nanoparticles is a candidate to replace the current formulations to achieve proper appetite suppression.

Fabrication of core-shell microcapsules using PLGA and alginate for dual growth factor delivery system.

To effectively harness the great potential of stem cells, we designed a dual growth factor delivery system for the application toward stem cell differentiation into specific lineages. This system carries a core-shell structure within microcapsules made of poly(L-lactide-co-glycolide) (PLGA) and alginate, which were fabricated using a coaxial electro-dropping method. Both PLGA and alginate were supplied from the inner and outer nozzles, respectively. The size and shape of microcapsules were greatly varying depending on the variables: nozzle size, applied voltage, volumetric feeding ratio (PLGA:alginate), feeding rate, and polymer concentrations. Once proper conditions were met, single or multi PLGA cores were found settled within the microcapsules. From the microscopic images, wrinkled surfaces of microcapsules were observed, along with the PLGA cores inside the alginate domain. When two different microcapsules were made, switching the position of bone morphogenetic protein (BMP)-2 and dexamethasone (Dex) for either core or shell domain, their release profiles were very unique on a temporal basis, based on their location in the microcapsules. An initial burst of biomolecules was highly suppressed when either biomolecule was loaded in the PLGA core. It was clear that the osteogenic biomolecules encapsulated in the microcapsule could be released together and their concentrations were disparate at each time point. Meanwhile as the hydrogel constructs including rat bone marrow stromal cells (BMSCs) and osteogenic factor-loaded microcapsules were cultured for up to 4 weeks, the gene expressions levels of osteopontin, type I collagen, and osteocalcin were significantly upregulated as compared to the control group. The present coaxial system was very effective in manufacturing PLGA core-alginate shell microcapsules and in encapsulating multiple biomolecules essential for stem cell differentiation.

Improved efficacy of appetite suppression by lipoic acid particles prepared by nanocomminution.

PURPOSE: This article was intended to improve the efficacy of alpha-lipoic acid (ALA) for appetite suppression by controlling the particle size and self-polymerization of ALA. METHODS: ALA was fabricated into micro- and nanoparticles, and the efficacy and in vitro release were investigated. Because of the self-polymerization of ALA into poly[3-(n-butane carboxylic acid)propyl]disulfide (PBCPD) by processing heat, low-speed rotation comminution was used to control PBCPD content. RESULTS: The ALA particle size initially decreased and then increased after 10 hours of nanocomminution, indicating aggregation related to PBCPD formation. The in vitro release of ALA was significantly reduced by the existence of PBCPD. Interestingly, the reduction was not followed by a decrease in efficacy. Alternatively, the food intake was significantly reduced by ALA particles containing more than 30 mol% PBCPD. CONCLUSIONS: When the particle size and self-polymerization of ALA were carefully controlled, the efficacy on appetite suppression could be superior to water-soluble ALA salt. The ALA particles might have a composite nanostructure of ALA and PBCPD.

Hearing abilities at ultra-high frequency in patients with tinnitus.

OBJECTIVES: To compare tinnitus patients who have normal hearing between 250 Hz and 8 kHz with normal controls with regard to the ability of each group to hear extended high-frequency pure tone thresholds. METHODS: We enrolled 18 tinnitus patients, each of whom had a threshold of HL <25 dB and threshold differences of <10 dB between ears at frequencies of 250 and 500 Hz and 1, 2, 4, and 8 kHz. We also enrolled age- and gender-matched normal volunteers (10 ears), for each patient. Extended high frequency pure tone audiometry was performed, and the mean hearing thresholds at 10, 12, 14, and 16 kHz of each tinnitus ear were compared with those of the 10 age- and sex-matched normal ears. RESULTS: Of the 18 patients with tinnitus, 12 had significantly increased hearing thresholds at more than one of the four high frequencies, compared with the normal group. When we assessed results according to frequency, we found that 8 patients had decreased hearing ability at 10 kHz, 10 at 12 kHz, 8 at 14 kHz, and 4 at 16 kHz. CONCLUSION: Some patients with tinnitus who have normal hearing below 8 kHz have decreased hearing ability at extended high-frequencies. Thus, the proportion of patients with tinnitus who have normal hearing over the entire audible range is smaller than in previous reports.

Effect of polymer molecular weight on nanocomminution of poorly soluble drug.

The reduction of particle size to nanometers has been an important tool used for efficient drug delivery. Solid drug nanoparticles can be conveniently prepared by nanocomminution. This process relies on mechanical energy and the selection of a proper polymeric stabilizer. The long chains of polymers provide steric stabilization for drug nanoparticles. In this research, itraconazole and hydroxypropyl cellulose were used to study the effect of the molecular weight of a polymer on particle size reduction. In principle, an increase in molecular weight produces two counteracting effects: a decrease in the diffusion rate of chains and an increase in the physical adsorption of a polymer. The effects of particle size reduction are more pronounced in systems involving smaller molecular weights, and the effects of changing molecular weights disappear with time. Systems of higher molecular weight show larger aggregates in their redispersion after drying. Based on the results of our research, it appears that polymers of smaller molecular weight are more suitable than larger polymers for efficient nanocomminution. This indicates that the kinetic aspects of molecular weight are important.