Development of On-Demand Antiviral Electrostatic Precipitators with Electrothermal-Based Antiviral Surfaces against Airborne Virus Particles.

Particulate matter, including airborne pathogens, is of particular concern because it can cause the spread of diseases through aerosol transmission. In this study, a new concept is proposed: on-demand antiviral electrostatic precipitators (ESPs) with electrothermal-based antiviral surfaces. We applied electrothermal-based antiviral surfaces to air-purifying applications and demonstrated that the proposed method is effective with regard to collecting airborne virus particles on collection plates in a two-stage ESP. With alternating current power, MS2 bacteriophage and H1N1 viruses were completely deactivated after exposure to 50 °C for 30 min. This remarkable antiviral performance via electrothermal effects indicates that on-demand platforms for self-antiviral surfaces can perform sterilization immediately without generating secondary pollutants, thus effectively preventing the spread of infectious microorganisms in public places. We believe that the results of this study can provide useful guidelines for the design and realization of practical and wearable devices for antiviral air-purifying applications.

Hierarchical ZnO nano-spines grown on a carbon fiber seed layer for efficient VOC removal and airborne virus and bacteria inactivation.

Air purification through fiber-based filters has become a fundamental requirement for air contamination control. However, conventional filters depend on polymeric fibrous filters with adequate particulate matter removal ability but fewer degassing and biocidal effects. This study presents the photocatalytic volatile organic compound (VOC) oxidation and antimicrobial properties of zinc oxide (ZnO) nano-spines sprouted activated-carbon nanofibers (I@ZnO/ACNFs) and their potential for air contamination control and infection prevention. By developing a novel technique that can induce phase separation of inorganic salts during electrospinning, nanofibers with zinc (Zn) components concentrated on the surface could be synthesized. I@ZnO/ACNFs exhibit a surface densely covered with high aspect-ratio ZnO nano-spines with significant lethality to airborne pathogens and enhanced photocatalytic activity toward VOCs. Moreover, excellent adhesion stability of ZnO to ACNFs under rapid airflow was observed in I@ZnO/ACNFs. In combination with intriguing antimicrobial activity and strong VOC removal capability derived from their unique morphology, novel I@ZnO/ACNFs hold potential for airborne microbial disinfection, effective and sustainable VOC purification, and the design of photomicrobicidal and photocatalytic materials.

Increased survivability of coronavirus and H1N1 influenza virus under electrostatic aerosol-to-hydrosol sampling.

Airborne virus susceptibility is an underlying cause of severe respiratory diseases, raising pandemic alerts worldwide. Following the first reports of the novel severe acute respiratory syndrome coronavirus-2 in 2019 and its rapid spread worldwide and the outbreak of a new highly variable strain of influenza A virus (H1N1) in 2009, developing quick, accurate monitoring and diagnostic approaches for emerging infections is considered critical. Efficient air sampling of coronaviruses and the H1N1 virus allows swift, real-time identification, triggering early adjuvant interventions. Electrostatic precipitation is an efficient method for sampling bio-aerosols as hydrosols; however, sampling conditions critically impact this method. Corona discharge ionizes surrounding air, generating reactive oxygen species (ROS), which may impair virus structural components, leading to RNA and/or protein damage and preventing virus detection. Herein, ascorbic acid (AA) dissolved in phosphate-buffered saline (PBS) was used as the sampling solution of an electrostatic sampler to counteract virus particle impairment, increasing virus survivability throughout sampling. The findings of this study indicate that the use of PBS+AA is effective in reducing the ROS damage of viral RNA by 95%, viral protein by 45% and virus yield by 60%.

Determination of Air Filter Anti-Viral Efficiency against an Airborne Infectious Virus.

Recently, various studies have reported the prevention and treatment of respiratory infection outbreaks caused by lethal viruses. Consequently, a variety of air filters coated with antimicrobial agents have been developed to capture and inactivate virus particles in continuous airflow conditions. However, since aerosolized infectious viral-testing is inadvisable due to safety concerns, their anti-viral capability has only been tested by inserting the filters into liquid media, where infectious virus particles disperse. In this study a novel method of determining anti-viral performance of an air filter against airborne infectious viruses is presented. Initially, anti-viral air filter tests were conducted. Firstly, by an air-media test, in which the air filter was placed against an aerosolized non-infectious virus. Secondly, by a liquid-media test, in which the filter was inserted into a liquid medium containing a non-infectious virus. Subsequently, a correlation was established by comparing the susceptibility constants obtained between the two medium tests and an association was found for the air medium test with infectious virus. After ensuring the relationship did not depend on the virus species, the correlation was used to derive the results of the air-medium test from the results of the liquid-medium test.

Artificial Nanoscale Erythrocytes from Clinically Relevant Compounds for Enhancing Cancer Immunotherapy.

Because of enhanced efficacy and lower side effects, cancer immunotherapies have recently been extensively investigated in clinical trials to overcome the limitations of conventional cancer monotherapies. Although engineering attempts have been made to build nanosystems even including stimulus nanomaterials for the efficient delivery of antigens, adjuvants, or anticancer drugs to improve immunogenic cancer cell death, this requires huge R&D efforts and investment for clinically relevant findings to be approved for translation of the nanosystems. To this end, in this study, an air-liquid two-phase electrospray was developed for stable bubble pressing under a balance between mechanical and electrical parameters of the spray to continuously produce biomimetic nanosystems consisting of only clinically relevant compounds [paclitaxel-loaded fake blood cell Eudragit particle (Eu-FBCP/PTX)] to provide a conceptual leap for the timely development of translatable chemo-immunotherapeutic nanosystems. This was pursued as the efficacy of systems for delivering anticancer agents that has been mainly influenced by nanosystem shape because of its relevance to transporting behavior to organs, blood circulation, and cell-membrane interactions. The resulting Eu-FBCP/PTX nanosystems exhibiting phagocytic and micropinocytic uptake behaviors can confer better efficacy in chemo-immunotherapeutics in the absence and presence of anti-PD-L1 antibodies than similar sized PTX-loaded spherical Eu particles (Eu-s/PTX).

Plug-In Safe-by-Design Nanoinorganic Antibacterials.

Due to antimicrobial resistance and the adverse health effects that follow broad and inappropriate use of antibacterial agents, new classes of antibacterials with broad and strong bactericidal activity and safety for human use are urgently required globally, increasingly so with the onset of climate change. However, R&D in this field is known to be rarely profitable, unless a cost-effective, flexible, and convenient platform that ensures the production of workable candidate antibacterials can be developed. To address this issue, inorganic nanomaterials have been considered for their bactericidal activities, yet further investigations of composition crystalline modifications and/or surface biomaterial coatings are still required to provide effective and safe antibacterial nanoparticles. In this study, we developed a plug-in system comprising a spark plasma reactor and a flow heater under nitrogen gas flow to supply precursor inorganic nanoparticles (Cu-Te configuration) that can be modulated in-flight at different temperatures. From antibacterial and toxicological assays in both in vitro and in vivo models, bactericidal and toxicological profiles showed that the plug-in system-based platform can be used to identify key parameters for producing safe-by-design agents with antibacterial activity [>88% (in vitro) and >80% (in vivo) in antibacterial efficiency] and safety (>65% in in vitro viability and >60% in in vivo survival rate).

Ferroelectric Zinc Oxide Nanowire Embedded Flexible Sensor for Motion and Temperature Sensing.

We report a simple method to realize multifunctional flexible motion sensor using ferroelectric lithium-doped ZnO-PDMS. The ferroelectric layer enables piezoelectric dynamic sensing and provides additional motion information to more precisely discriminate different motions. The PEDOT:PSS-functionalized AgNWs, working as electrode layers for the piezoelectric sensing layer, resistively detect a change of both movement or temperature. Thus, through the optimal integration of both elements, the sensing limit, accuracy, and functionality can be further expanded. The method introduced here is a simple and effective route to realize a high-performance flexible motion sensor with integrated multifunctionalities.

Evaluation of Ag nanoparticle coated air filter against aerosolized virus: Anti-viral efficiency with dust loading.

In this study, the effect of dust loading on the anti-viral ability of an anti-viral air filter was investigated. Silver nanoparticles approximately 11 nm in diameter were synthesized via a spark discharge generation system and were used as anti-viral agents coated onto a medium air filter. The pressure drop, filtration efficiency, and anti-viral ability of the filter against aerosolized bacteriophage MS2 virus particles were tested with dust loading. The filtration efficiency and pressure drop increased with dust loading, while the anti-viral ability decreased. Theoretical analysis of anti-viral ability with dust loading was carried out using a mathematical model based on that presented by Joe et al. (J. Hazard. Mater.; 280: 356-363, 2014). Our model can be used to compare anti-viral abilities of various anti-viral agents, determine appropriate coating areal density of anti-viral agent on a filter, and predict the life cycle of an anti-viral filter.

A comparative study for the inactivation of multidrug resistance bacteria using dielectric barrier discharge and nano-second pulsed plasma.

Bacteria can be inactivated through various physical and chemical means, and these have always been the focus of extensive research. To further improve the methodology for these ends, two types of plasma systems were investigated: nano-second pulsed plasma (NPP) as liquid discharge plasma and an Argon gas-feeding dielectric barrier discharge (Ar-DBD) as a form of surface plasma. To understand the sterilizing action of these two different plasma sources, we performed experiments with Staphylococcus aureus (S. aureus) bacteria (wild type) and multidrug resistant bacteria (Penicillum-resistant, Methicillin-resistant and Gentamicin-resistant). We observed that both plasma sources can inactivate both the wild type and multidrug-resistant bacteria to a good extent. Moreover, we observed a change in the surface morphology, gene expression and ß-lactamase activity. Furthermore, we used X-ray photoelectron spectroscopy to investigate the variation in functional groups (C-H/C-C, C-OH and C=O) of the peptidoglycan (PG) resulting from exposure to plasma species. To obtain atomic scale insight in the plasma-cell interactions and support our experimental observations, we have performed molecular dynamics simulations to study the effects of plasma species, such as OH, H2O2, O, O3, as well as O2 and H2O, on the dissociation/formation of above mentioned functional groups in PG.

Generation mechanism of hydroxyl radical species and its lifetime prediction during the plasma-initiated ultraviolet (UV) photolysis.

Through this work, we have elucidated the mechanism of hydroxyl radicals (OH(•)) generation and its life time measurements in biosolution. We observed that plasma-initiated ultraviolet (UV) photolysis were responsible for the continues generation of OH(•) species, that resulted in OH(•) to be major reactive species (RS) in the solution. The density and lifetime of OH(•) species acted inversely proportional to each other with increasing depth inside the solution. The cause of increased lifetime of OH(•) inside the solution is predicted using theoretical and semiempirical calculations. Further, to predict the mechanism of conversion of hydroxide ion (OH(-)) to OH(•) or H2O2 (hydrogen peroxide) and electron, we determined the current inside the solution of different pH. Additionally, we have investigated the critical criterion for OH(•) interaction on cancer cell inducing apoptosis under effective OH(•) exposure time. These studies are innovative in the field of plasma chemistry and medicine.

Influence of nanosecond pulsed plasma on the non-enzymatic pathway for the generation of nitric oxide from L-arginine and the modification of graphite oxide to increase the solar cell efficiency.

In this work, we demonstrated the action of nanosecond pulsed plasma (NPP) on the generation of nitric oxide (NO) from the non-enzymatic pathway and on the modification of graphite oxide (GO) sheets to increase polymer solar cells (PSCs) efficiency. NO is an important signal and an effector molecule in animals, which is generated from the enzyme-catalyzed oxidation of L-arginine to NO and L-citrulline. Hence, L-arginine is an important biological precursor for NO formation. Therefore, we developed a new non-enzymatic pathway for the formation of NO and L-citrulline using NPP and characterized the pathway using NO detection kit, NMR, liquid chromatography/capillary electrophoresis-mass spectrometry (LC/CE-MS) for both quantitative and qualitative bioanalysis. We then synthesized and modified the functional groups of GO using NPP, and it was characterised by X-ray photoelectron spectroscopy (XPS), confocal Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) imaging, cathodoluminescence (CL) and work function using γ-FIB. Further, we also tested the power conversion efficiency of the PSCs devices with modified GO that is similar to the one obtained with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) as HTL. This work is perceived to have great implications for inexpensive and efficient methodology for NO generation and modification of GO, which are applicable in materials from nanomaterials to biomolecules.

Non-thermal plasma treatment diminishes fungal viability and up-regulates resistance genes in a plant host.

Reactive oxygen and nitrogen species can have either harmful or beneficial effects on biological systems depending on the dose administered and the species of organism exposed, suggesting that application of reactive species can possibly produce contradictory effects in disease control, pathogen inactivation and activation of host resistance. A novel technology known as atmospheric-pressure non-thermal plasma represents a means of generating various reactive species that adversely affect pathogens (inactivation) while simultaneously up-regulating host defense genes. The anti-microbial efficacy of this technology was tested on the plant fungal pathogen Fusarium oxysporum f.sp. lycopersici and its susceptible host plant species Solanum lycopercicum. Germination of fungal spores suspended in saline was decreased over time after exposed to argon (Ar) plasma for 10 min. Although the majority of treated spores exhibited necrotic death, apoptosis was also observed along with the up-regulation of apoptosis related genes. Increases in the levels of peroxynitrite and nitrite in saline following plasma treatment may have been responsible for the observed spore death. In addition, increased transcription of pathogenesis related (PR) genes was observed in the roots of the susceptible tomato cultivar (S. lycopercicum) after exposure to the same Ar plasma dose used in fungal inactivation. These data suggest that atmospheric-pressure non-thermal plasma can be efficiently used to control plant fungal diseases by inactivating fungal pathogens and up-regulating mechanisms of host resistance.

IL-6 attenuates trimethyltin-induced cognitive dysfunction via activation of JAK2/STAT3, M1 mAChR and ERK signaling network.

We previously reported that interleukin (IL)-6 deficiency potentiates trimethyltin (TMT)-induced convulsive neurotoxicity. The purpose in this study was to investigate the molecular mechanism by which cytokines affect TMT-induced cognitive impairment. To accomplish this, we examined hippocampal changes in Janus kinase 2 (JAK2)/signal transducer and activator of transcription 3 (STAT3) signaling in relation to cholinergic parameters after TMT treatment in mice genetically deficient in IL-6 (IL-6(-/-)), tumor necrosis factor-α (TNF-α(-/-)), or interferon-γ (IFN-γ(-/-)). The IL-6(-/-) mice were the most susceptible to TMT-induced cognitive dysfunction and exhibited significant decreases in JAK2/STAT3 signaling and M1 muscarinic acetylcholine receptor (mAChR) expression, as well as other cholinergic parameters, compared with wild-type (WT) animals. Recombinant IL-6 protein (rIL-6) significantly attenuated these impairments in TMT-treated IL-6(-/-) mice, whereas an IL-6 receptor antibody potentiated these impairments in TMT-treated WT animals. Inhibition of JAK2 with AG490 or inhibition of cholinergic signaling with the M1 mAChR antagonist dicyclomine counteracted the attenuating effects of rIL-6 on phosphorylated extracellular signal-regulated kinase (ERK) expression, or on cognitive impairment in TMT-treated IL-6(-/-) mice. However, neither AG490 nor dicyclomine significantly attenuated effects of rIL-6 on acetylcholinesterase values. Our results suggest that activation of JAK2/STAT3 signaling and upregulation of the M1 mAChR are essential components of IL-6-mediated memory improvement against TMT toxicity.

Soft-chemical exfoliation route to layered cobalt oxide monolayers and its application for film deposition and nanoparticle synthesis.

A colloidal suspension of exfoliated, layered cobalt oxide nanosheets has been synthesized through the intercalation of quaternary tetramethylammonium ions into protonated lithium cobalt oxide. According to atomic force microscopy, exfoliated nanosheets of layered cobalt oxide show a plateau-like height profile with nanometer-level height, underscoring the formation of unilamellar 2D nanosheets. The exfoliation of layered cobalt oxide was cross-confirmed by X-ray diffraction, UV/Vis spectroscopy, and transmission electron microscopy. The maintenance of the hexagonal in-plane structure of the cobalt oxide lattice after the exfoliation process was evidenced by selected-area electron diffraction and Co K-edge X-ray absorption near-edge structure analysis. The zeta-potential measurements clearly demonstrated the negative surface charge of cobalt oxide nanosheets. Adopting the nanosheets of layered cobalt oxide as a precursor, we were able to prepare the monodisperse CoO nanocrystals with a particle size of approximately 10 nm as well as the heterolayered film composed of cobalt oxide monolayer and polycation.

Direct soft-chemical synthesis of chalcogen-doped manganese oxide 1D nanostructures: influence of chalcogen doping on electrode performance.

We have developed a direct nonhydrothermal route to nanostructured chalcogen-doped manganese oxides; K(x)MnO(2)Q(y) (Q = S, Se, and Te). According to combinative diffraction and microscopic analyses, the S- and Se-doped manganese oxides exhibit 1D nanowire-type morphology with layered delta-MnO(2)- and alpha-MnO(2)-structures, respectively, whereas the Te-doped compound consists of 3D nanospheres that are amorphous according to X-ray diffraction. X-ray absorption and X-ray photoelectron spectroscopy analyses clearly demonstrate that the doped chalcogen ions exist in the form of hexavalent chalcogenate clusters mainly on the sample surface or grain boundary. According to electrochemical and ex situ X-ray absorption spectroscopy investigations, the Se-doped manganate nanowires show higher structural stability and better electrode performance with excellent rate characteristics compared to the S-/Te-doped and undoped manganate nanostructures. This is attributed to the presence of chemically stable SeO4(2-) species, leading to enhanced stability of the manganate lattice through the prevention of structural deformation during cycling and/or to the improvement of Li(+) ion transport through the maintenance of intercrystallite voids. Based on the present experimental findings, we are able to conclude that the present one-pot soft-chemical route with chalcogen dopants can provide a simple method not only to economically synthesize 1D nanostructured manganese oxides but also to finely control their electrode performance, crystal structure and morphology, and lattice stability.

Influence of synthesis temperature on the crystal structure and electrode property of sulfur-doped manganese oxide nanowires.

Sulfur-doped manganese oxide 1D nanostructures with controllable crystal structures and crystallite dimensions have been synthesized via one-pot non-hydrothermal solution route. Powder X-ray diffraction analysis clearly demonstrated that the crystal structures of the sulfur-doped manganates can be tailored by the change of reaction temperature; layered delta-MnO2-structured material was obtained at 60 degrees C while the reaction at 90 degrees C produced tunnel alpha-MnO2 structured material. According to field emission-scanning electron microscopy, both sulfur-doped manganates possess 1D nanostructure-type morphology with the diameter of approximately 20 nm and the length of approximately 1 microm for delta-MnO2-type material, and the diameter of approximately 100 nm and the length of approximately 800 nm for alpha-MnO2-type material, respectively. From X-ray photoelectron and X-ray absorption spectroscopic analyses, sulfur ions exist as highly oxidized sulfate cluster on surface or grain boundary of the manganate crystallite whereas manganese ions are stabilized in octahedral geometry with the mixed oxidation state of Mn+3/Mn+4. Of special importance is that both sulfur-doped manganate nanowires show promising electrode performances for lithium secondary batteries.

Effect of copper doping on the crystal structure and morphology of 1D nanostructured manganese oxides.

We have tried to control the aspect ratio and physicochemical properties of 1D nanostructured manganese oxides through copper doping. Copper-doped manganese oxide nanostructures have been synthesized by one-pot hydrothermal treatment for the mixed solution of permanganate anions and copper cations. According to powder X-ray diffraction and electron microscopic analyses, all the present materials commonly crystallize with alpha-MnO2-type structure but their aspect ratio decreases significantly with increasing the content of copper. Such a variation of crystallite dimension is attributable to the limitation of crystal growth by the incorporation of copper ions. X-ray absorption spectroscopic studies at Mn K- and Cu K-edges clearly demonstrate that the average oxidation state of manganese ions is increased by the substitution of divalent copper ions. Electrochemical measurements reveal the improvement of the electrode performance of nanostructured manganate upon copper doping, which can be interpreted as a result of the decrease of aspect ratio and the increase of Mn valence state. From the present experimental findings, it becomes certain that the present Cu doping method can provide an effective way of controlling the crystal dimension and electrochemical property of 1D nanostructured manganese oxide.

Evolution of the crystal and electronic structures of magnetic RuSr(2-x)La(x)GdCu2O8 superconductors upon La substitution.

We have investigated systematically the effects of La substitution on the chemical bonding nature and physical properties of magnetic RuSr(2-x)La(x)GdCu2O8 superconductors. X-ray diffraction and energy dispersive spectroscopic microprobe analyses reveal that a fraction of Sr ions can be successfully replaced by La ions with the contraction of unit cell volume. According to electrical resistance and dc magnetization measurements, the La substitution gives rise to a significant reduction of superconducting transition temperature (T(c)) but to an increase of magnetic ordering temperature with depressed remanent magnetization. Ru K- and Cu K-edge X-ray absorption spectroscopic results clarify that average Ru and Cu oxidation states decrease upon the La substitution. On the basis of the spectroscopic evidences presented here, we are able to attribute the T(c) reduction upon the La substitution to the depletion of the hole density in CuO2 layers and the accompanying variation of magnetic coupling behavior to the change of Ru oxidation state.

Influences of alkaline earth metal substitution on the crystal structure and physical properties of magnetic RuSr1.9A0.1GdCu2O8 (A = Ca, Sr, and Ba) superconductors.

We have investigated the effect of alkaline earth metal substitution on the crystal structure and physical properties of magnetic superconductors RuSr(1.9)A(0.1)GdCu(2)O(8) (A = Ca, Sr, and Ba) in order to probe an interaction between the magnetic coupling of the RuO(2) layer and the superconductivity of the CuO(2) layer. X-ray diffraction and X-ray absorption spectroscopic analyses demonstrate that the isovalent substitution of Sr ions with Ca or Ba ions makes it possible to tune the interlayer distance between the CuO(2) and the RuO(2) layers. From the measurements of electrical resistance and magnetic susceptibility, it was found that, in contrast to negligible change of magnetization, both of the alkaline earth metal substitutions lead to a notable depression of zero-resistance temperature T(c) (DeltaT(c) approximately 17-19 K). On the basis of the absence of a systematic correlation between the T(c) and the interlayer distance/magnetization, we have concluded that the internal magnetic field of the RuO(2) layer has insignificant influence on the superconducting property of the CuO(2) layer in the ruthenocuprate.