Effective characterization of polymer residues on two-dimensional materials by Raman spectroscopy.

Large-area two-dimensional (2D) materials grown by chemical vapor deposition need to be transferred onto a target substrate for real applications. Poly(methyl methacrylate) as a supporting layer is widely used during the transfer process and removed after finishing it. However, it is a challenge to diminish the polymer layer completely. It is necessary to readily characterize the polymer residues on 2D materials to facilitate the removal process. Here, we report a method that characterizes the polymer residues on 2D materials by tracking the presence of G-band of amorphous carbons (a-Cs) in the Raman spectrum after forming carbonized a-Cs through thermal annealing. The (13)C-graphene is employed to separate the Raman signal G-band between (12)C-a-Cs and (13)C-graphene in the Raman spectrum. The residence of the polymer residues is clearly confirmed by the different Raman signals of two different isotopes ((12)C and (13)C) due to differences in mass. Our effective method recognizes that while the polymer residue is not easily removed on graphene, those on hexagonal boron nitride and molybdenum disulfide are almost diminished under optimum thermal annealing conditions. Our method will not only contribute to the development of a new transfer process, but also help to achieve a clean surface of 2D materials.

Reduction-controlled viologen in bisolvent as an environmentally stable n-type dopant for carbon nanotubes.

Various viologens have been used to control the doping of single-walled carbon nanotubes (SWCNTs) via direct redox reactions. A new method of extracting neutral viologen (V(0)) was introduced using a biphase of toluene and viologen-dissolved water. A reductant of sodium borohydride transferred positively charged viologen (V(2+)) into V(0), where the reduced V(0) was separated into toluene with high separation yield. This separated V(0) solution was dropped on carbon nanotube transistors to investigate the doping effect of CNTs. With a viologen concentration of 3 mM, all the p-type CNT transistors were converted to n-type with improved on/off ratios. This was achieved by donating electrons spontaneously to CNTs from neutral V(0), leaving energetically stable V(2+) on the nanotube surface again. The doped CNTs were stable in water due to the presence of hydrophobic V(0) at the outermost CNT transistors, which may act as a protecting layer to prevent further oxidation from water.

Fermi level engineering of single-walled carbon nanotubes by AuCl3 doping.

We investigated the modulation of optical properties of single-walled carbon nanotubes (SWCNTs) by AuCl 3 doping. The van Hove singularity transitions (E 11 (S), E 22 (S), E 11 (M)) in absorption spectroscopy disappeared gradually with an increasing doping concentration and a new peak appeared at a high doping concentration. The work function was downshifted up to 0.42 eV by a strong charge transfer from the SWCNTs to AuCl 3 by a high level of p-doping. We propose that this large work function shift forces the Fermi level of the SWCNTs to be located deep in the valence band, i.e., highly degenerate, creating empty van Hove singularity states, and hence the work function shift invokes a new asymmetric transition in the absorption spectroscopy from a deeper level to newly generated empty states.