Successful Treatment of Refractory or Relapsed Hepatoblastoma With Autologous Hematopoietic Stem Cell Transplantation in Children.

BACKGROUND: The standard-risk hepatoblastoma has a good prognosis in children; however, refractory or relapsed (R/R) hepatoblastoma has a poor prognosis and high mortality rate. This study aimed to demonstrate the efficacy of high-dose chemotherapy and autologous hematopoietic stem cell transplantation (HSCT) rescue in pediatric patients with R/R hepatoblastoma. METHODS: We retrospectively analyzed 6 pediatric patients with R/R hepatoblastoma who underwent autologous HSCT. The MEC conditioning regimen was used for all patients, comprising melphalan 140 mg/m2/day intravenously (IV) on day 7 and 70 mg/m2 on day 6, etoposide 200 mg/m2 IV on days 5 to 8, and carboplatin 400 mg/m2 IV on days 5 to 8. One patient received a TopoThioCarbo regimen, comprising topotecan 2 mg/m2/day IV on days 4 to 8, thiotepa 300 mg/m2/day IV on days 6 to 8, and carboplatin 500 mg/m2/day IV on days 3 to 5, as the conditioning regimen for the first transplantation. This was followed by salvage chemotherapy for relapse, and the second transplantation was performed using MEC as the conditioning regimen. RESULTS: We report the retrospective results of 6 patients with a median age of 1.8 (range 0.4 to 10.2) years who had R/R hepatoblastoma and underwent autologous HSCT. The median follow-up period was 58 (range 28 to 113) months after diagnosis. The median stage at diagnosis was 2.0 (range 2 to 4). Two patients had lung metastases during diagnosis. The median initial alpha-fetoprotein level was 292,888 (range 28,831 to 2,406,942) ng/mL, and the median number of chemotherapy lines before autologous HSCT was 3.5 (range 2 to 7). The disease status before HSCT was complete remission (CR) for all patients. The engraftment rate was 100%. No treatment-related mortality was reported. The 3-year event-free survival and overall survival rates were 83.3% and 100%, respectively. One patient relapsed after the second HSCT and achieved CR after salvage chemotherapy. CONCLUSION: This study suggests autologous HSCT as an effective treatment in pediatric patients with R/R hepatoblastoma. Nevertheless, future large-scale prospective studies are warranted.

A bifid ureter originating from separate major calyx and renal pelvis with dual calyceal systems: a case report.

Present case report describes a case of bifid ureter arising directly from separate calyces and renal pelvis of the kidney. Incomplete ureter duplication on the left side in a 78-year-old male cadaver was found during an anatomy class. These ureters converged in a Y-shaped pattern just above the level of the anterior superior iliac spine. In the coronal section of the kidney, the anterior ureter arose from a renal pelvis that was divided into two major calyces in the lower two-thirds of the kidney. On the other hand, the posterior ureter was directly connected to a major calyx in the upper third of the kidney, without the formation of a renal pelvis. This anatomical variation has implications for diagnostic approaches, especially in the use of imaging techniques by urologists for the insertion of stents in the treatment of phyelonephritis.

Evaluation of the forAge Age-at-Death Estimation Program Using Pubic Symphyseal Surface in a Korean Population.

The forAge program estimates the age-at-death of human pubic symphysis using 3-dimensional scans. It was developed by Dennis E. Slice and Bridget F. B. Algee-Hewitt, and utilizes three distinct scores: the Slice and Algee-Hewitt (SAH) score, bending energy (BE), and ventral curvature (VC). However, these scores and age estimation regression equation were obtained through European American pubic symphysis. Changes in the pubic symphysis surface are evaluated as one of the most reliable indicators for estimating age, but in connection with this, using Korean materials, changes in the pubic symphysis surface and the actual changes are evaluated. There is no bar where the relationship between ages is grasped, and there are cases where a methodology developed for a specific group is applied to a Korean group. Changing the pubic symphysis surface by aging was evaluated as one of the most reliable indicators for estimating age. However, there is no study conducted on the relationship between changes in the pubic symphysis and actual age and applied the age estimation method for a specific population among Korean population. The purpose of this study is to compare the difference between the actual age and the estimated age in Korean to see if the forAge program is applicable to other population of different ancestral origin. One hundred and four modern Korean pubic symphyseal surfaces (47 to 96 years old) were used in this study. Through the pubic symphyseal surface 3-dimensional images, age-at-death was estimated via prediction equation and new regression lines using SAH, VC, and BE scores. Firstly, the estimated age via prediction equation using the first version of SAH score was lower than the actual age according to all pubic symphyseal surfaces for those older than 56. With aging, the difference between the actual age and estimated age became markedly larger. Secondly, the estimated ages via the new regression lines using VC, the second version of SAH score, and BE were shown a similar pattern to the previous prediction equation. The current study explored the applicability of a quantitative method using pubic symphyseal surface for age estimation in a modern Korean population. This study showed the forAge program cannot be applied to a modern Korean population, as they present relatively low correlations with the actual age-at-death.

Comparable outcomes of allogeneic peripheral blood versus bone marrow hematopoietic stem cell transplantation from a sibling donor for pediatric patients.

Traditionally, bone marrow (BM) has been preferred as a source of stem cells (SCs) in pediatric hematopoietic SC transplantation (HSCT); however, the use of peripheral blood SCs (PBSC) has recently increased. With advancing graft-versus-host disease (GVHD) prophylaxis, whether the BM is still a better SC source than PB in sibling donor HSCT remains controversial. Here, we compared the results of BM transplantation (BMT) and PBSC transplantation (PBSCT) in pediatric patients with malignant or non-malignant diseases receiving sibling HSCT using a total of 7.5 mg/kg of anti-thymocyte globulin (ATG). We retrospectively reviewed children who received HSCT from a sibling donor between 2005 and 2020 at Seoul National University Children's Hospital. Of the 86 patients, 40 underwent BMT, and 46 underwent PBSCT. Fifty- six patients had malignant diseases, whereas thirty patients had non-malignant diseases. All conditioning regimens comprised ATG. Busulfan-based myeloablative conditioning regimens were administered to patients with malignant diseases and approximately half of those with non-malignant diseases. The remaining half of the patients with non-malignant diseases were administered cyclophosphamide-based reduced- intensity conditioning regimens. According to studies conducted at our center, all BM donors received G-CSF before harvest to achieve early engraftment. In all 86 patients (47 males and 39 females), the median age at the time of HSCT was 11.4 (range, 0.7 - 24.6) years. The median follow-up period was 57.9 (range, 0.9-228.6) months, and the corresponding values for those with BM and PBSC were 77 (range, 2.4-228.6) months and 48.7 (range, 0.9-213.2) months, respectively. Engraftment failure occurred in one patient with BM and no patient with PBSC. The cumulative incidence of acute GVHD with grades II-IV was higher in PBSC (BM 2.5%, PBSC 26.1%, p = 0.002), but there was no significant difference in those with grades III-IV acute GVHD (BM 0%, PBSC 6.5%, p = 0.3703) and extensive chronic GVHD (BM 2.5%, PBSC 11.6%, p = 0.1004). There were no significant differences in treatment-related mortality (TRM) (BM 14.2%, PBSC 6.8%, p = 0.453), 5-year event-free survival (EFS) (BM 71.5%, PBSC 76.2%, p = 0.874), and overall survival (OS) rates (BM 80.8%, PBSC 80.3%, p = 0.867) between BM and PBSC in the univariate analysis. In the multivariate analysis, which included all factors with p < 0.50 in the univariate analysis, there was no significant prognostic factor for EFS or OS. There was no significant difference in the relapse incidence between BM and PBSC among patients with malignant diseases (BM 14.2%, PBSC 6.8%, p = 0.453). Additionally, there were no significant differences in the TRM, 5-year EFS, and OS rates between malignant and non-malignant diseases nor between the busulfan-based myeloablative regimen and reduced-intensity chemotherapy using cyclophosphamide. In this study, we showed no significant differences in EFS, OS, TRM, and GVHD, except for acute GVHD grades II-IV, between BMT and PBSCT from sibling donors, using ATG (a total of 7.5 mg/kg). Therefore, PB collection, which is less invasive for donors and less labor-intensive for doctors, could also be considered an acceptable SC source for sibling donor HSCT in children.

Comparative analysis of malt quality and starch characteristics of three South Korean barley cultivars.

In this study, malt was produced in pilot-scale facilities and conditioned using three barley (Hordeum vulgare L.) cultivars in South Korea (Heugho, Hopum, and Kwangmaeg). Quality and starch characteristics were compared. The starch content was considerably reduced in all malts. Coleoptile elongation was higher in Heugho (HHM; 85.7% ± 12.6%) and Hopum (HPM; 83.9% ± 10.7%) than in Kwangmaeg (KMM; 78.1% ± 9.9%) malt. Malt yield ranged from 81.8 to 84.9%, with no significant difference. All samples presented type A crystallinity, and granules showed discoid shapes. After malting, the mono- and di-saccharide contents (not including sucrose) were increased. The fermentable sugar level was the highest in HHM, whereas non-fermentable sugar was the highest in KMM. These results suggest that HPM enables efficient scarification based on the rapid degradation of starch, while Heugho barley and HHM have a high potential for beer and malt production, respectively. Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-023-01419-6.

Characterization of Polyvinyl Alcohol (PVA)/Polyacrylic Acid (PAA) Composite Film-Forming Solutions and Resulting Films as Affected by Beeswax Content.

Recently, the food packaging industry has focused on developing an eco-friendly and sustainable food packaging system. This study describes the effect of beeswax on the physical, structural, and barrier properties of a polyvinyl alcohol (PVA)/polyacrylic acid (PAA) composite film. The incorporation of beeswax improved the barrier properties against oxygen, water, and oil. However, the addition of a high content of beeswax caused phase separation in the film-forming solution. The destabilization mechanisms such as clarification and creaming formation in the film-forming solution were revealed by turbidimetric analysis. The results of scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) indicates that non-homogeneous structures in the film-forming solution were formed as a function of increased beeswax content due to the agglomeration of beeswax. The mechanical properties of the films were also evaluated to determine the most appropriate content of beeswax. There was a slight decrease in tensile strength and an increase in elongation as beeswax content increased up to 10%. Thus, the PVA/PAA composite film with 10% beeswax was chosen for further applications. In summary, the PVA/PAA composite film developed in this study with 10% beeswax exhibited a significant improvement in barrier properties and has the potential for use in commerce.

Anatomical and Ultrasonographic Analyses of the Levator Labii Superioris Alaeque Nasi Muscle at the Level of the Nasal Ala / Análisis Anatómico y Ecográfico del Músculo Elevador Nasolabial a Nivel del Ala Nasal

SUMMARY: We aimed to determine the width of the levator labii superioris alaeque nasi muscle (LLSAN) at the level of the nasal ala through cadaveric dissections and ultrasonography (US), to provide essential anatomical information for use during both invasive and noninvasive procedures in the nasal ala region. The LLSAN was investigated in the 40 hemifaces of 20 Korean cadavers, comprising 10 males and 10 females with a mean age of 73.6 years. The LLSAN width of the 40 specimens at the level of the midpoint of the nasal ala was 5.02±2.35 mm (mean±standard deviation), and ranged from 1.45 mm to 10.11 mm. The LLSAN widths were 5.96±2.36 mm and 3.93±1.89 mm in males and females, respectively, with ranges of 2.40-10.11 mm and 1.45-6.96 mm, respectively. The LLSAN widths on the left and right sides were 4.77±2.72 mm and 5.26±1.99 mm, respectively. The proportions of the LLSAN fibers inserting into the nasal ala and upper lip were similar in 13 specimens (32.5 %), while more fibers inserted into the nasal ala in 11 specimens (27.5 %) and more fibers inserted fibers of the LLSAN into the upper lip in 16 specimens (40 %). When clinicians need to target or avoid the LLSAN, the present width and range data can be helpful for ensuring the efficacy and safely of both invasive and noninvasive procedures. In addition, the possibility of asymmetry in the width of the LLSAN in the nasal ala region should be confirmed by US before performing such procedures.

Nuestro objetivo fue determinar el ancho del músculo elevador nasolabial (MENL) a nivel del ala nasal mediante disecciones cadavéricas y ecografía, para proporcionar información anatómica esencial, para su uso durante procedimientos invasivos y no invasivos, en la región del ala nasal. El MENL se estudió en 40 hemicaras de 20 cadáveres coreanos (10 hombres y 10 mujeres) con una edad media de 73,6 años. El ancho de MENL de las 40 muestras a nivel del punto medio del ala nasal fue de 5,02 ± 2,35 mm (media ± desviación estándar) y osciló entre 1,45 mm y 10,11 mm. Los anchos de MENL fueron 5,96 ± 2,36 mm y 3,93 ± 1,89 mm en hombres y mujeres, respectivamente, con rangos de 2,40 a 10,11 mm y 1,45 a 6,96 mm, respec- tivamente. Los anchos de MENL en los lados izquierdo y derecho fueron 4,77 ± 2,72 mm y 5,26 ± 1,99 mm, respectivamente. Las proporciones de fibras de MENL que se insertaban en el ala nasal y en el labio superior fueron similares en 13 muestras (32,5 %), mientras que se insertaron más fibras en el ala nasal en 11 muestras (27,5 %) y además, se insertaron fibras de MENL en el labio superior en 16 ejemplares (40 %). Cuando los médicos necesitan apuntar o evitar el MENL, los datos actuales de ancho y rango pueden ser útiles para garantizar la eficacia y seguridad de los procedimientos, tanto invasivos como no invasivos. Además, la ecografía puede ser utilizada para confirmar una posible asimetría en el ancho del MENL en la región del ala nasal antes de realizar los procedimientos.

Application of UV-Vis-NIR and FTIR spectroscopy coupled with chemometrics for quality prediction of katsuobushi based on the number of smoking treatments.

Katsuobushi, a smoked, dried skipjack tuna, is a traditional Japanese food additive with a unique flavor and taste. Gas chromatography mass spectrometry (GC-MS), fourier transform infrared (FTIR), and ultraviolet-visible-near infrared spectroscopy (UV-Vis-NIR) combined with chemometric methods were evaluated the quality of katsuobushi according to the number of smoking treatments. Using GC-MS, 46 metabolites were identified and five metabolites were selected as key compounds. All samples were classified according to their smoking number via principal component analysis (PCA), partial least squares-discriminate analysis (PLS-DA) and hierarchical cluster analysis (HCA) of the FTIR and NIR spectra. Partial least squares regression (PLSR) analysis revealed that the FTIR and NIR spectra were highly correlated with the metabolites by GC-MS. These results demonstrated the potential of using the FTIR and NIR spectroscopy combined with chemometrics to assess the quality of katsuobushi based on the smoking treatments, with NIR spectroscopy showed particularly promising.

4D-printed microneedles from dual-sensitive chitosan for non-transdermal drug delivery.

Microneedles are a promising micro-scale drug delivery platform that has been under development for over two decades. While 3D printing technology has been applied to fabricate these systems, the challenge of achieving needle sharpness remains. In this study, we present an innovative approach for microneedle fabrication using digital light processing (DLP) 3D printing and smart chitosan biomaterial. For the first time, we used hydroxybutyl methacrylated chitosan (HBCMA), which possesses dual temperature- and photo-sensitive properties, to create microneedles. The DLP approach enabled a quick generation of HBCMA-based microneedles with a high resolution. The microneedles exhibited 4D properties with a change in needle dimensions upon exposure to temperature, which enhances resolution, sharpens needles, and improves mechanical strength. We demonstrated the ability of these microneedles to load, deliver, sustained release small molecular drugs and penetrate soft tissue. Overall, the HBCMA-based microneedles show promising potential in non-dermal drug delivery applications.

Quality evaluation and storage test for capsaicin-fortified yogurt based on the multilayer nanoemulsion system.

Capsaicin has many benefits, such as pain relief, cancer prevention, and weight reduction. However, the application of capsaicin has been limited in the food industry due to its strong pungency, odor, and low solubility in water. Therefore, a multilayer nanoemulsion with chitosan and hyaluronic acid was developed for masking its odor and taste and improving the physicochemical stability against the surrounding environment. The capsaicin-fortified yogurts were prepared by blending various concentration levels of multilayer nanoemulsion (0-15%, w/v). The quality of yogurt was determined as a function of pH, acidity, viscosity, and total lactic acid bacteria population in an extended storage period (21 days). The multivariate statistical analysis was used to compare the quality of yogurts supplemented with capsaicin nanoemulsion. As a result, this study demonstrated the potential of capsaicin-loaded multilayer emulsion-supplemented yogurt as a novel nutrition-fortified food.

Elaboration of dimensional quality in 3D-printed food: Key factors in process steps.

Three-dimensional (3D) printing has been applied to produce food products with intricate and fancy shapes. Dimensional quality, such as dimensional stability, surface smoothness, shape fidelity, and resolution, are essential for the attractive appearance of 3D-printed food. Various methods have been extensively studied and proposed to control the dimensional quality of printed foods, but few papers focused on comprehensively and deeply summarizing the key factors of the dimensional quality of printed products at each stage-before, during, and after printing-of the 3D printing process. Therefore, the effects of pretreatment, printing parameters and rheological properties, and cooking and storage on the dimensional quality of the printed foods are summarized, and solutions are also provided for improving the dimensional quality of the printed products at each step. Before printing, incorporating additives or applying physical, chemical, or biological pretreatments can improve the dimensional quality of carbohydrate-based, protein-based, or lipid-based printed food. During printing, controlling the printing parameters and modifying the rheological properties of inks can affect the shape of printed products. Furthermore, post-processing is essential for some printed foods. After printing, changing formulations, incorporating additives, and selecting post-processing methods and conditions may help achieve the desired shape of 3D-printed or 4D-printed products during cooking. Additives help in the storage stability of printed food. Finally, various opportunities have been proposed to regulate the dimensional properties of 3D-printed structures. This review provides detailed guidelines for researchers and users of 3D printers to produce various printed foods with the desired shapes and appearances.

Association of Body Mass Index and Waist Circumference with Osteoarthritis among Korean Adults: A Nationwide Study.

BACKGROUND: Evidence on the association between obesity parameters, including body mass index (BMI) and waist circumference (WC), and osteoarthritis is limited. This study aimed to investigate these associations in Korean adults. METHODS: This nationwide cross-sectional study used data from 24,101 adults aged ≥19 years who participated in the Korea National Health and Nutrition Examination Survey 2016-2020. Odds ratios (ORs) and 95% confidence intervals (CIs) for osteoarthritis according to BMI and WC were analyzed using multivariable logistic regression analyses. RESULTS: The prevalence of osteoarthritis was higher in individuals with general (10.0%) and abdominal obesity (12.8%) compared with those without. Greater BMI and WC were associated with a higher prevalence (P<0.001) and risk of osteoarthritis (Model 3, P for trend <0.001). Individuals with general and abdominal obesity were associated with a 1.50-fold (OR, 1.50; 95% CI, 1.35-1.67) and 1.64-fold (OR, 1.64; 95% CI, 1.47-1.84) increased risk of osteoarthritis, compared with those without. Similar associations were observed in subgroups according to age, sex, smoking status, and presence of diabetes mellitus. The odds of osteoarthritis 1.73-fold increased (OR, 1.73; 95% CI, 1.53-1.95) in individuals with both general and abdominal obesity compared with those without any of them. CONCLUSION: Greater BMI, WC, and general and abdominal obesity were associated with an increased risk of osteoarthritis in Korean adults. Appropriate management of abdominal and general obesity may be important to reduce the risk of osteoarthritis.

Positional relationships of the origin and course of zygomaticus major with the nasal ala, tragus, philtrum, and lateral canthus for aesthetic treatments and surgeries.

PURPOSE: The aim of this study was to characterize the origin and course of the zygomaticus major muscle (Zmj) with its topographic relationships with the nasal ala, tragus, philtrum, and lateral canthus. METHODS: The Zmj was examined in 50 specimens of 25 embalmed adult Korean cadavers. Facial muscles were dissected to expose the origin and course of the Zmj in 48 specimens of 24 cadavers. The 25th cadaver was sectioned to obtain images of the Zmj. RESULTS: The positional relationships of the Zmj origin with the nasal ala and the tragus were classified into three categories. A horizontal line through the center of the Zmj origin and the nasal ala passed through the tragus in 20 of 48 specimens (41.7%), the intertragic notch in 18 specimens (37.5%), and above the tragus in 10 specimens (20.8%). In a horizontal section of the head, the Zmj origin was located near the level of the nasal ala and tragus. In a coronal section of the head, the fibers of the Zmj arising at its origin were located close to the zygomatic bone, lateral to the zygomaticus minor muscle. CONCLUSION: By combining dissection with the analysis of sectioned images and ultrasound images of the Zmj, this study has yielded positional information for easily predicting the location of the origin and the course of the Zmj and its related structures underlying the skin.

Prioritization of Injury Prevention and Management Programs and Research and Development (R&D) Projects: Survey Using the Delphi Technique and Analytic Hierarchy Process.

We prioritized injury prevention and management programs, and research and development (R&D) projects using the Delphi method and analytic hierarchy process (AHP) for national plan. We summarized 21 programs and 31 R&D projects based on opinions collected in the opinion survey and brainstorming. Expert panel evaluated program and project relevance in the two Delphi rounds to make consensus. Total scores were calculated by adding criterion weights calculated through the AHP multiplied by the average of scores for each program and project. The top three programs were "Integrated Management System for Injury Data," "Comprehensive Injury Surveillance System," and "Transport System Improvement Program for Major Trauma." The top three R&D projects were researches on "Identification of Vulnerable Workers Injuries to Strengthen Protections," "Data Integration on Injury and Disability," and "Using Public Health Big Data to Identify Injury Status and Risk Factors." Experts highly rated the programs to improve injury surveillance system.

Does injecting small amounts of fillers prevent the development of secondary blindness?

INTRODUCTION: Inadvertent entry of filler products into the supratrochlear, supraorbital, or dorsal nasal arteries, among other branches of the ophthalmic artery, might result in an immediate and devastating loss of vision. We wanted to examine how much filler could block the ophthalmic artery. MATERIALS AND METHODS: Twenty-nine fresh cadavers were examined. We exposed the arterial supply to the opthalmic artery by dissecting the orbital area. Thereafter, 17 filler injections were introduced into the supratrochlear, supraorbital, and dorsal nasal arteries each. The amount of filler injection that completely blocked the ophthalmic artery was measured. Additionally, one of the head specimens was processed using phosphotungstic acid-based contrast enhancement micro-computed tomography to analyze each arteries to obstruct its whole ophthalmic artery. RESULTS: The supratrochlear, supraorbital, and dorsal nasal arteries had mean volumes in milliliter (mean ± standard deviation) of 0.0397 ± 0.010 mL, 0.0409 ± 0.00932 mL, and 0.0368 ± 0.00732 mL, respectively. However, the arteries did not differ significantly. CONCLUSION: Even a modest amount of filler injection can completely block the ophthalmic artery, resulting in visual loss.

Paravertebral Nerve Block for Procedural Pain in Percutaneous Vertebroplasty.

OBJECTIVES: This study aimed to unidimensionally measure procedural pain at each percutaneous vertebroplasty (PVP) stage and evaluate the effectiveness of paravertebral nerve block (PVNB) in reducing procedural pain. METHODS: A retrospective study of prospectively collected data was conducted on 66 patients who underwent PVP for osteoporotic vertebral compression fractures. The patients were divided into 2 groups: group A (fluoroscopic-guided PVNB; 5 cm 3 of 0.75% ropivacaine on each side) and group B (local anesthesia). To investigate procedural pain associated with PVP, the visual analog scale score was assessed at each surgical stage: before the incision (stage 1), transpedicular approach (stage 2), and polymethylmethacrylate cement injection (stage 3). After the procedure, patients were asked about their surgical experience and satisfaction using the Iowa Satisfaction with Anesthesia Scale. Periprocedural complications were also recorded. RESULTS: A total of 63 patients (78.65 y of age) were finally enrolled: 30 from group A and 33 from group B. In both groups, a significant ≥2-point increase in procedural pain was observed during PVP compared with that during stage 1 ( P < 0.001). In stages 2 and 3, the pain intensity was significantly lower in group A ( P < 0.001). Upon discharge, the visual analog scale score improved in all groups; however, the Iowa Satisfaction with Anesthesia Scale score was significantly higher in group A ( P < 0.001). There was no difference in periprocedural complications between the two groups ( P = 0.743). CONCLUSION: PVP causes significant procedural pain, and PVNB is a potentially effective modality for enhancing patient satisfaction and reducing procedural pain.

Effect of l-cysteine on functional properties and fibrous structure formation of 3D-printed meat analogs from plant-based proteins.

The development of three-dimensional (3D) printed meat analogs with fiber, texture, and sensory resembling meat remains challenging. This study investigated the effect of l-cysteine on functionality enhancement and fibrous structure formation in mixtures of mung bean protein isolate (MBPI) and wheat gluten (WG) for meat analog production. 3D printing was used to construct fibrous filaments. Raw MBPI-WG mixtures decreased rheological properties when increasing l-cysteine contents (0.0%-0.6%), promoting ink extrudability. The cys-0.4% ink exhibited the highest printing resolution and structural stability, correlated with its higher mechanical strength and increased disulfide cross-links. After cooking, the cys-0.4% sample showed a pronounced fibrousness in agreement with its microstructure image. This meat analog displayed a muscle-meat-like structure, improved texture, and reduced beany odor and bitter taste. Excessive cysteine contents (0.5%-0.6%) negatively affected the functionality of meat analogs. This study provides guidance for optimizing the amount of l-cysteine in meat analogs to improve product quality.

Body Surface Area-Based Dosing of Mycophenolate Mofetil in Pediatric Hematopoietic Stem Cell Transplant Recipients: A Prospective Population Pharmacokinetic Study.

Mycophenolate mofetil (MMF) is commonly used for acute graft-versus-host disease (aGVHD) after allogeneic hematopoietic stem cell transplantation (HSCT). However, limited population pharmacokinetic (PPK) data are available for pediatric HSCT patients. This study aimed to develop a PPK model and recommend optimal oral MMF dosage in pediatric HSCT patients. This prospective study involved pediatric HSCT patients at a tertiary academic institution. Patients received oral MMF 15-20 mg/kg twice daily for aGVHD prophylaxis and treatment. The PPK analysis was conducted using a nonlinear mixed-effects modeling method. Simulation was performed considering different body surface areas (BSAs) (0.5 m2, 1.0 m2, 1.5 m2) and dosing (400 mg/m2, 600 mg/m2, 900 mg/m2 twice daily). Based on the simulation, an optimal dosage of oral MMF was suggested. A total of 20 patients and 80 samples were included in the PPK model development. A one-compartment model with first-order absorption adequately described the pharmacokinetics of mycophenolic acid (MPA). BSA was a statistically significant covariate on Vd/F. Simulation suggested the optimal dosage of oral MMF as 900 mg/m2 twice daily, respectively. A reliable PPK model was developed with good predictive performance. This model-informed optimal MMF dosage in pediatric HSCT patients can provide valuable dosing guidance in real-world clinical practice.

The Impact of 131I-Metaiodobenzylguanidine as a Conditioning Regimen of Tandem High-Dose Chemotherapy and Autologous Stem Cell Transplantation for High-Risk Neuroblastoma.

BACKGROUND: The optimal conditioning regimen of tandem high-dose chemotherapy (HDC) and autologous stem cell transplantation (ASCT) for high-risk neuroblastoma (HR-NBL) has not been established. The efficacy of 131I-MIBG therapy is under exploration in newly diagnosed HR-NBL patients. Here, we compared the outcomes of tandem HDC/ASCT between the 131I-MIBG combination and non-MIBG groups. METHODS: We retrospectively analyzed the clinical data of 33 HR-NBL patients who underwent tandem HDC/ASCT between 2007 and 2021 at the Seoul National University Children's Hospital. RESULTS: The median age at diagnosis was 3.6 years. 131I-MIBG was administered to 13 (39.4%) of the patients. Thirty patients (90.9%) received maintenance therapy after tandem HDC/ASCT, twenty-two were treated with isotretinoin ± interleukin-2, and eight received salvage chemotherapy. The five-year overall survival (OS) and event-free survival (EFS) rates of all patients were 80.4% and 69.4%, respectively. Comparing the 131I-MIBG combined group and other groups, the five-year OS rates were 82.1% and 79.7% (p = 0.655), and the five-year EFS rates were 69.2% and 69.6% (p = 0.922), respectively. Among the adverse effects of grade 3 or 4, the incidence of liver enzyme elevation was significantly higher in the non-131I-MIBG group. CONCLUSIONS: Although tandem HDC/ASCT showed promising outcomes, the 131I-MIBG combination did not improve survival rates.

Association of Tumor Necrosis Factor Inhibitors with the Risk of Nontuberculous Mycobacterial Infection in Patients with Rheumatoid Arthritis: A Nationwide Cohort Study.

Tumor necrosis factor inhibitors (TNFi) are proposed as a risk factor for nontuberculous mycobacteria (NTM) infection. Limited research investigates NTM infection risk in rheumatoid arthritis (RA) patients treated with TNFi compared to conventional synthetic disease-modifying antirheumatic drugs (csDMARDs), considering other concurrent or prior non-TNFi antirheumatic drugs. We aimed to evaluate the NTM infection risk associated with TNFi using a real-world database. Patients with RA treated with TNFi or csDMARDs between 2005 and 2016 were identified utilizing the Korean National Health Insurance Service database. To minimize potential bias, we aligned the initiation year of csDMARDs for both TNFi and csDMARD users and tracked them from their respective treatment start dates. The association of TNFi with NTM infection risk was estimated in a one-to-one matched cohort using a multivariable conditional Cox regression analysis. In the matched cohort (n = 4556), the incidence rates of NTM infection were 2.47 and 3.66 per 1000 person-year in TNFi and csDMARD users. Compared to csDMARDs, TNFi did not increase the risk of NTM infection (adjusted hazard ratio (aHR) 0.517 (95% confidence interval, 0.205-1.301)). The TNFi use in RA patients was not associated with an increased risk of NTM infection compared to csDMARDs. Nevertheless, monitoring during TNFi treatment is crucial.