Nontoxic, Biodegradable Hyperbranched Poly(ß-amino ester)s for Efficient siRNA Delivery and Gene Silencing.

RNA interference (RNAi)-mediated gene silencing is a promising therapeutic approach to treat various diseases, but safe and efficient delivery remains a major challenge to its clinical application. Non-viral gene vectors, such as poly(ß-amino esters) (pBAEs), have emerged as a potential candidate due to their biodegradability, low toxicity profile, ease of synthesis, and high gene transfection efficiency for both DNA and siRNA delivery. However, achieving significant gene silencing using pBAEs often requires a large amount of polymer carrier (with polymer/siRNA weight ratio >100) or high siRNA dose (>100 nM), which might potentially exacerbate toxicity concerns during delivery. To overcome these barriers, we designed and optimized a series of hyperbranched pBAEs capable of efficiently condensing siRNA and achieving excellent silencing efficiency at a lower polymer/siRNA weight ratio (w/w) and siRNA dose. Through modulation of monomer combinations and branching density, we identified the top-performing hyperbranched pBAEs, named as h(A2B3)-1, which possess good siRNA condensation ability, low cytotoxicity, and high cellular uptake efficiency. Compared with Lipofectamine 2000, h(A2B3)-1 achieved lower cytotoxicity and higher siRNA silencing efficiency in HeLa cells at a polymer/siRNA weight ratio of 30 and 30 nM siRNA dose. Notably, h(A2B3)-1 enhanced the gene uptake in primary neural cells and effectively silenced the target gene in hard-to-transfect primary cortical neurons and oligodendrocyte progenitor cells, with gene knockdown efficiencies of 34.8 and 53.4% respectively. By incorporating a bioreducible disulfide compartment into the polymer backbone, the cytocompatibility of the h(A2B3)-1 was greatly enhanced while maintaining their good transfection efficiency. Together, the low cytotoxicity and high siRNA transfection efficiency of hyperbranched h(A2B3)-1 in this study demonstrated their great potential as a non-viral gene vector for efficient siRNA delivery and RNAi-mediated gene silencing. This provides valuable insight into the future development of safe and efficient non-viral siRNA delivery systems as well as their translation into clinical applications.

Exploration of photochemical reactions of N-trimethylsilylmethyl-substituted uracil, pyridone, and pyrrolidone derivatives.

Photochemical reactions of N-trimethylsilylmethyl-substituted uracil, pyridone and pyrrolidone derivatives were carried out to determine if silicone containing substituents have an impact on excited state reaction profiles. The results show that ultraviolet irradiation of N-trimethylsilylmethyl substituted uracils in the presence of substituted alkenes leads to efficient formation of both dimeric and cross [2+2]-cycloaddition products. Qualitatively similar observations were made in a study of the photochemistry of N-trimethylsilylmethyl-2-pyridone. The combined results demonstrate that [2+2]-photocycloaddition is a more efficient excited state reaction pathway for the uracil and pyridone substrates as compared to other processes, such as ylide-forming trimethylsilyl group C-to-O migration. Finally, photoreactions of N-trimethylsilylmethyl-2-pyrrolidone in solutions containing dipolarophiles, such as methyl acrylate, lead to the formation of the desilylation product, N-methyl-2-pyrrolidone by way of a simple, non-ylide generating, protodesilylation process. In addition, observations were made which show that orbital symmetry allowed photocycloreversion reactions of dimeric uracil derivatives, involving cyclobutane ring splitting, to take place. These processes, which lead to the formation of monomeric uracils, appear to be stimulated by the presence of electron donor groups on the cyclobutane ring, a likely result of a new SET promoted cyclobutane ring cleavage pathway. In the cases of N-trimethylsilylmethyl-substituted cyclobutane derivatives that possess phthalimide groups, highly efficient excited state cleavage of the cyclobutane moiety occurs to produce uracil derivatives and corresponding vinyl phthalimide.

Fabrication of a microarray using a combination of the large circular sense and antisense DNA.

In the present study, single-stranded large circular (LC)-sense molecules were utilized as probes for DNA microarrays and showed stronger binding signals than those of PCR-amplified cDNA probes. A microarray experiment using 284 LC-sense DNA probes found 6 upregulated and 7 downregulated genes in A549 cells as compared to WI38VA13 cells. Repeated experiments showed largely consistent results, and microarray data strongly correlated with data acquired from quantitative real-time RT-PCR. A large array comprising 5,079 LC-sense DNA was prepared, and analysis of the mean differential expression from dye-swap experiments revealed 332 upregulated and 509 downregulated genes in A549 cells compared to WI38VA13 cells. Subsequent functional analysis using an LC-antisense library of overexpressed genes identified 28 genes involved in A549 cell growth. These experiments demonstrated the proper features of LC-sense molecules as probe DNA for microarray and the potential utility of the combination of LC-sense and -antisense libraries for an effective functional validation of genes.

Water sorption and dynamic mechanical properties of dentin adhesives with a urethane-based multifunctional methacrylate monomer.

OBJECTIVES: Our previous study showed the synthesis and characterization of a novel urethane-linked trimethacrylate monomer for use as a co-monomer in dentin adhesives. The objective of this work was to further investigate the performance of dentin adhesives containing a new monomer, with particular emphasis on the water sorption and viscoelastic behavior of the crosslinked networks. MATERIALS AND METHODS: Dentin adhesives contained 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy) phenyl]-propane (BisGMA), 2-hydroxyethyl methacrylate (HEMA), and a new multifunctional methacrylate with urethane-linked groups-1,1,1-tri-[4-(methacryloxyethylaminocarbonyloxy)-phenyl]ethane (MPE) and were photo-polymerized in the presence or absence of water. Adhesives were characterized with regard to degree of conversion (DC), viscosity, water sorption/solubility, and dynamic mechanical analysis (DMA) and compared with BisGMA/HEMA controls. RESULTS: The experimental adhesives exhibited DC and solubility comparable to that of the control, regardless of the presence or absence of water. All the experimental adhesives tested showed less water sorption, lower tandelta peak heights, and higher rubbery modulus than the control. SIGNIFICANCE: Dentin adhesives containing a new multifunctional methacrylate showed better dynamic thermomechanical properties and water sorption relative to controls, without compromising DC and solubility. Thus, MPE, when included as a component of methacrylate dentin adhesives, may provide enhanced durability in the moist environment of the mouth.

Enzyme-catalyzed hydrolysis of dentin adhesives containing a new urethane-based trimethacrylate monomer.

A new trimethacrylate monomer with urethane-linked groups, 1,1,1-tri-[4-(methacryloxyethylamino-carbonyloxy)-phenyl]ethane (MPE), was synthesized, characterized, and used as a comonomer in dentin adhesives. Dentin adhesives containing 2-hydroxyethyl methacrylate (HEMA, 45% w/w) and 2,2-bis[4(2-hydroxy-3-methacryloyloxy-propyloxy)-phenyl] propane (BisGMA, 30% w/w) in addition to MPE (25% w/w) were formulated with H(2)O at 0 (MPE0), 8 (MPE8), and 16 wt % water (MPE16) to simulate the wet demineralized dentin matrix and compared with controls [HEMA /BisGMA, 45/55 w/w, at 0 (C0), 8 (C8), and 16 wt % water (C16)]. The new adhesive showed a degree of double bond conversion and mechanical properties comparable with control, with good penetration into the dentin surface and a uniform adhesive/dentin interface. On exposure to porcine liver esterase, the net cumulative methacrylic acid (MAA) released from the new adhesives was dramatically (p < 0.05) decreased relative to the control, suggesting that the new monomer improves esterase resistance.

Synthesis of novel cholesterol-based cationic lipids for gene delivery.

The new cholesterol-based cationic lipids B, C, and D with an ether linked spacer were synthesized by using aminopropyl chain extension with acrylonitrile. The cholesterol-based cationic lipid A with carbamoyl linkage were also synthesized in order to compare the difference in transfection efficiency of the two linkage types. To this end, GFP expression of these cationic lipids was confirmed respectively.

Dynamic mechanical analysis and esterase degradation of dentin adhesives containing a branched methacrylate.

A study of the dynamic mechanical properties and the enzymatic degradation of new dentin adhesives containing a multifunctional methacrylate are described. Adhesives contained 2-hydroxyethyl methacrylate, 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy) phenyl]-propane, and a new multifunctional methacrylate with a branched side chain-trimethylolpropane mono allyl ether dimethacrylate (TMPEDMA). Adhesives were photopolymerized in the presence of 0, 8, and 16 wt % water to simulate wet bonding conditions in the mouth and compared with control adhesives. The degree of conversion as a function of irradiation time was comparable for experimental and control adhesives. In dynamic mechanical analysis, broad tan delta peaks were obtained for all samples, indicating that the polymerized networks are heterogeneous; comparison of the full-width-at-half-maximum values obtained from the tan delta curves indicated increased heterogeneity for samples cured in the presence of water and/or containing TMPEDMA. The experimental adhesive showed higher T(g) and higher rubbery modulus indicating increased crosslink density when compared with the control. The improvement in esterase resistance afforded by adhesives containing the TMPEDMA is greater when this material is photopolymerized in the presence of water, suggesting better performance in the moist environment of the mouth. The improved esterase resistance of the new adhesive could be explained in terms of the densely crosslinked network structure and/or the steric hindrance of branched alkyl side chains.

Sanguinarine induces apoptosis in A549 human lung cancer cells primarily via cellular glutathione depletion.

Sanguinarine is a plant-derived benzophenanthridine alkaloid and has been shown to possess anti-tumor activities against various cancer cells. In this study, we investigated whether sanguinarine induces apoptosis in A549 human lung cancer cells. Treatment of A549 cells with sanguinarine induced apoptosis in a dose- and time-dependent manner. Treatment with sanguinarine led to activation of caspases and MAPKs as well as increased MKP-1 expression. Importantly, pretreatment with z-VAD-fmk, a pan caspase inhibitor suppressed the sanguinarine-induced apoptosis in A549 cells. Moreover, pretreatment with NAC, a sulfhydryl group-containing reducing agent strongly suppressed the apoptotic response and caspase activation to sanguinarine. However, the sanguinarine-mediated cytotoxicity in A549 cells was not protected by pharmacological inhibition of MAPKs or MKP-1 siRNA-mediated knockdown of MKP-1. These results collectively suggest that sanguinarine induces apoptosis in A549 cells through cellular glutathione depletion and the subsequent caspase activation.

Enzymatic biodegradation of HEMA/bisGMA adhesives formulated with different water content.

Dentin adhesives may undergo phase separation when bonding to wet demineralized dentin. We hypothesized that adhesives exhibiting phase separation will experience enhanced biodegradation of methacrylate ester groups. The objective of this project was to study the effect of enzyme-exposure on the release of methacrylic acid (MAA) and 2-hydroxyethyl methacrylate (HEMA) from adhesives formulated under conditions simulating wet bonding. HEMA/bisGMA(2,2-bis[4(2-hydroxy-3-methacryloyloxy-propyloxy)-phenyl] propane), 45/55 w/w ratio, was formulated with different water content: 0 Wt % (A00), 8 wt % (A08), and 16 wt % (A16). After a three day prewash, adhesive discs were incubated with/without porcine liver esterase (PLE) in phosphate buffer (PB, pH 7.4) at 37 degrees C for 8 days. Supernatants were collected daily and analyzed for MAA and HEMA by HPLC. For all formulations, daily MAA release in the presence of PLE was increased compared to MAA release in PB. HEMA release in the presence of PLE was not detected while HEMA release was consistently measured in PB. A08 and A16 released significantly larger amounts of HEMA compared to A00. Analysis of the cumulative release of analytes showed that the leachables in PLE was significantly increased (p < 0.05) as compared with that released in PB indicating that MAA release was not only formed from unreacted monomers but from pendant groups in the polymer network. However, the levels of analytes HEMA in PB or MAA in PLE were increased in A08 and A16 as compared with A00, which suggests that there could be a greater loss of material in HEMA/bisGMA adhesives that experience phase separation under wet bonding conditions.

Bioactive glass-ionomer cement with potential therapeutic function to dentin capping mineralization.

We have developed a novel bioactive resin-modified glass-ionomer cement system with therapeutic function to dentin capping mineralization. In the system, the newly synthesized star-shape poly(acrylic acid) was formulated with water, Fuji II LC filler, and bioactive glass S53P4 to form resin-modified glass-ionomer cement. Compressive strength (CS) was used as a screening tool for evaluation. The commercial glass-ionomer cement Fuji II LC was used as a control. All the specimens were conditioned in simulated body fluid (SBF) at 37 degrees C prior to testing. The effect of aging in SBF on CS and microhardness of the cements was investigated. Scanning electron microscopy was used to examine the in vitro dentin surface changes caused by the incorporation of bioactive glass. The results show that the system not only provided strengths comparable to original commercial Fuji II LC cement but also allowed the cement to help mineralize the dentin in the presence of SBF. It appears that this bioactive glass-ionomer cement system has direct therapeutic impact on dental restorations that require root surface fillings.

Cadmium specifically induces MKP-1 expression via the glutathione depletion-mediated p38 MAPK activation in C6 glioma cells.

Cadmium is a toxic heavy metal and an environmental pollutant. Mitogen-activated protein kinase (MAPK) phosphatase-1 (MKP-1) is a negative regulator of the family of MAPK. In this study, we investigated the effect of heavy metals on MKP-1 expression in C6 rat glioma cells. Cadmium treatment induced MKP-1 at both protein and mRNA levels while cobalt or manganese treatment did not, suggesting the specificity. Cadmium treatment also depleted intracellular GSH and activated p38 MAPK, JNKs, and AKT. Profoundly, pretreatment with thiol-containing compounds NAC or GSH, but not vitamin E, blocked GSH depletion, 38 MAPK activation and MKP-1 expression by cadmium. Moreover, pharmacological inhibition of p38 MAPK by SB203580 suppressed the cadmium-induced MKP-1. Collectively, these results demonstrate that cadmium specifically induces MKP-1 by transcriptional up-regulation in C6 cells in a mechanism associated with the glutathione depletion-dependent p38 MAPK activation.

Prevention of CCl4-induced liver cirrhosis by ribbon antisense to transforming growth factor-beta1.

Transforming growth factor-beta1 (TGF-beta1) is an important mediator of tissue fibrosis, including liver cirrhosis. Ribbon-type antisense oligonucleotide to TGF-beta1 (TGF-beta1 RiAS) was designed and combined with cationic peptide derived from the nuclear localization signal of human immunodeficiency virus-1 Tat protein for enhanced cellular uptake. When Hepa1c1c7 cells were transfected with TGF-beta1 RiAS, the level of TGF-beta1 mRNA was reduced by >70%. TGF-beta1 RiAS, mismatched RiAS, and normal saline were each injected into mice via the tail vein, beginning the week after intraperitoneal CCl4 injection and continuing for 7 weeks, in order to determine whether TGF-beta1 RiAS prevents the fibrotic changes induced by the CCl4 injection. After 8 weeks of the experiment, all of the mice treated with TGF-beta1 RiAS survived, compared to 50% of the control group and 65% of the mismatched RiAS-treated group. Upon examining the biochemical effects on the liver, TGF-beta1 mRNA levels were reduced significantly only in the TGF-beta1 RiAS-treated group. Immunohistochemical studies showed a reduced accumulation of collagen and alpha-smooth muscle actin. Our experimental results suggest that ribbon antisense to TGF-beta1, with efficient uptake, effectively blocks the expression of TGF-beta1 and prevents fibrosis of the liver.

Preparation and Properties of Novel Dentin Adhesives with Esterase Resistance.

A new methacrylate monomer, trimethylolpropane mono allyl ether dimethacrylate (TMPEDMA), was synthesized and evaluated. This branched methacrylate was designed to increase esterase-resistance when incorporated into conventional HEMA (2-hydroxyethyl methacrylate)/BisGMA (2,2-bis[4(2-hydroxy-3-methacryloyloxy-propyloxy)-phenyl] propane) dental adhesives. The new adhesives, HEMA/BisGMA/TMPEDMA in a 45/30/25 (w/w) ratio were formulated with H(2)O at 0 (A0T) and 8 wt % water (A8T) and compared with control adhesives (HEMA/BisGMA, 45/55 (w/w), at 0 (A0) and 8 wt % (A8) water). Camphoroquinone (CQ), 2-(dimethylamino) ethyl methacrylate and diphenyliodonium hexafluorophosphate were used as photoinitiators. The new adhesives showed a degree of conversion comparable with the control and improved modulus and glass transition temperature (T(g)). Exposure of photopolymerized discs to porcine liver esterase for up to eight days showed that the net cumulative methacrylic acid (MAA) release in adhesives formulated with the new monomer and 8% water (A8T: 182 µg/mL) was dramatically (P < 0.05) decreased in comparison to the control (A8: 361.6 µg/mL). The results demonstrate that adhesives made with the new monomer and cured in water to simulate wet bonding are more resistant to esterase than conventional HEMA/BisGMA adhesive.

Marked transfection enhancement by the DPL (DNA/peptide/lipid) complex.

A short peptide, corresponding to the nuclear localization signal of the human immunodeficiency virus-1 Tat protein, Arg-Lys-Lys-Arg-Arg-Gln-Arg-Arg-Arg, was modified by adding a cysteine residue at the COOH terminus. The peptide was mixed with a reporter plasmid, and then with cationic lipids, to form a tripartite complex, DNA/peptide/lipid (DPL). Various cell lines were treated with the DPL complex and compared for transfection efficiency with those of the conventional DNA/lipid (DL) complex. With the simple inclusion of the peptide, the DPL complex showed much enhanced transfection. Meanwhile, the plasmid DNA mixed only with the peptide exhibited some improvement but with much lower transfection than the DPL complex. When the DPL complex was formed with various cationic lipids, the DOSPA/DOPE exhibited superior transfection efficiency than the other cationic lipids tested at the optimal ratio of 1:3:5 (w:w:w) in many cell types. At the optimal ratio of the DPL components, transfection efficiency was routinely shown to be approximately 10-fold higher for reporter gene expression than that of the conventional DL complex. Furthermore, when subcutaneous tumors of a colon cancer cell line (SW480) were treated intratumorally with antisense oligos, k-ras-RiAS, delivered as a DPL complex, tumor growth was markedly suppressed. This study shows that the DPL complex, which is easy to formulate by ordered mixing, can be employed for a much enhanced cellular uptake of a transgene both in vitro and in vivo.

Glucosamine hydrochloride specifically inhibits COX-2 by preventing COX-2 N-glycosylation and by increasing COX-2 protein turnover in a proteasome-dependent manner.

COX-2 and its products, including prostaglandin E(2), are involved in many inflammatory processes. Glucosamine (GS) is an amino monosaccharide and has been widely used for alternative regimen of (osteo) arthritis. However, the mechanism of action of GS on COX-2 expression remains unclear. Here we describe a new action mechanism of glucosamine hydrochloride (GS-HCl) to tackle endogenous and agonist-driven COX-2 at protein level. GS-HCl (but not GS sulfate, N-acetyl GS, or galactosamine HCl) resulted in a shift in the molecular mass of COX-2 from 72-74 to 66-70 kDa and concomitant inhibition of prostaglandin E(2) production in a concentration-dependent manner in interleukin (IL)-1beta-treated A549 human lung epithelial cells. Remarkably, GS-HCl-mediated decrease in COX-2 molecular mass was associated with inhibition of COX-2 N-glycosylation during translation, as assessed by the effect of tunicamycin, the protein N-glycosylation inhibitor, or of cycloheximide, the translation inhibitor, on COX-2 modification. Specifically, the effect of low concentration of GS-HCl (1 mM) or of tunicamycin (0.1 microg/ml) to produce the aglycosylated COX-2 was rescued by the proteasomal inhibitor MG132 but not by the lysosomal or caspase inhibitors. However, the proteasomal inhibitors did not show an effect at 5 mM GS-HCl, which produced the aglycosylated or completely deglycosylated form of COX-2. Notably, GS-HCl (5 mM) also facilitated degradation of the higher molecular species of COX-2 in IL-1beta-treated A549 cells that was retarded by MG132. GS-HCl (5 mM) was also able to decrease the molecular mass of endogenous and IL-1beta- or tumor necrosis factor-alpha-driven COX-2 in different human cell lines, including Hep2 (bronchial) and H292 (laryngeal). However, GS-HCl did not affect COX-1 protein expression. These results demonstrate for the first time that GS-HCl inhibits COX-2 activity by preventing COX-2 co-translational N-glycosylation and by facilitating COX-2 protein turnover during translation in a proteasome-dependent manner.

Dexamethasone suppresses interleukin-1beta-induced human beta-defensin 2 mRNA expression: involvement of p38 MAPK, JNK, MKP-1, and NF-kappaB transcriptional factor in A549 cells.

Human beta-defensin (HBD)-2 is an inducible antimicrobial peptide that plays an important role in innate immunity. Glucocorticoids, on the other hand, exert immunosuppressive and anti-inflammatory actions. We have previously reported that interleukin (IL)-1beta induces HBD-2 mRNA expression through the activation of nuclear factor-kappaB (NF-kappaB) transcriptional factor, as well as p38 mitogen-activated protein kinase (MAPK), c-Jun N-terminal kinase (JNK), or phosphatidylinositol-3-kinase/AKT in A549 cells. In this study, we further investigated whether dexamethasone (Dex) controls IL-1beta-induced HBD-2 mRNA expression in A549 cells and the molecular mechanism associated with it. Dex suppressed IL-1beta-induced HBD-2 mRNA expression, which is mediated by a glucocorticoid receptor, at the transcriptional level. Interestingly, Dex attenuated IL-1beta-mediated activation of p38 MAPK and JNK, but not of AKT. Dex increased the expression of MAPK phosphatase (MKP)-1, which dephosphorylated p38 MAPK, but not JNK, by IL-1beta. However, although Dex did not inhibit the nuclear translocation of p65 NF-kappaB in response to IL-1beta, it profoundly inhibited NF-kappaB promoter- and HBD-2 promoter-driven luciferase activities. These results suggest that Dex acts to inhibit IL-1beta-induced HBD-2 mRNA expression through blockage of the nuclear transcriptional activation of p65 NF-kappaB as well as through inactivation of p38 MAPK and JNK. Specifically, Dex-induced MKP-1 expression is responsible for the inactivation of p38 MAPK, but not JNK, in response to IL-1beta in A549 cells.

A novel light-cured glass-ionomer system for improved dental restoratives.

A novel light-cured glass-ionomer cement (LCGIC) system based on the 4-arm star-shape poly(acrylic acid) (AA) tethered with glycidyl methacrylate has been developed. The 4-arm poly(AA) polymer was synthesized using atom-transfer radical polymerization. The purified polymer was used to formulate with water and Fuji II LC filler to form LCGICs. Compressive strength (CS) was used as a screening tool for evaluation. The effects of grafting ratio, polymer/water (P/W) ratio, filler powder/polymer liquid (P/L) ratio and aging on strengths were investigated. All the specimens were conditioned in distilled water at 37 degrees C for 24 h prior to testing. The results show that the 4-arm poly(AA) polymer exhibited a lower viscosity as compared to its linear counterpart that was synthesized via conventional free-radical polymerization. This novel LCGIC system was 13% in CS, 86% in diametral tensile strength (DTS) and 123% in flexural strength higher but 93.6% in shrinkage lower than Fuji II LC. Increasing P/W ratio significantly increased both CS and DTS. Upon increasing grafting ratio, the CS was increased from 35% to 50% but not from 50% to 70%. Likewise, when P/L ratio was increased, the CS was increased from 2.2 to 2.7 but not from 2.7 to 3.0. During aging, the ultimate CS (MPa) was significantly increased from 209.2 at 1 h to 329.7 at 1 week. It appears that this novel LCGIC system will be a better dental restorative because it demonstrated improved mechanical strengths as well as little shrinkage and may eliminate cytotoxicity in current LCGICs caused by leached HEMA.

Triptolide suppresses interleukin-1beta-induced human beta-defensin-2 mRNA expression through inhibition of transcriptional activation of NF-kappaB in A549 cells.

The immunosuppressive effect of triptolide has been associated with suppression of T-cell activation. However, the immunosuppressive effects of triptolide on innate immunity in the epithelial barrier remain to be elucidated. Human beta-defensin (HBD)-2 is an inducible antimicrobial peptide and plays an important role in the innate immunity. We have previously demonstrated that IL-1beta induced HBD-2 mRNA expression in A549 cells through activation of nuclear factor-kappaB (NF-kappaB) transcriptional factor as well as p38 mitogen-activated protein kinase (MAPK), c-Jun N-terminal kinase (JNK), or phosphatidylinositol-3-kinase (PI3K). In this study, we investigated effects of triptolide on IL-1beta-induced HBD-2 mRNA expression in A549 cells. Triptolide inhibited IL-1beta-induced HBD-2 mRNA expression in a dose-dependent manner. Addition of triptolide did not suppress activation of p38 MAPK, JNK, or PI3K in response to IL-1beta. Triptolide inhibited IL-1beta-induced MAPK phosphatase-1 expression at the transcriptional level and resulted in sustained phosphorylation of JNK or p38 MAPK, explaining the little effect of triptolide on IL-1beta-induced phosphorylation of these kinases. Although triptolide partially suppressed IL-1beta-mediated degradation of IkappaB-alpha and nuclear translocation of p65 NF-kappaB, triptolide potently inhibited NF-kappaB promoter-driven luciferase activity in A549 cells. These results collectively suggest that the inhibitory effect of triptolide on IL-1beta-induced HBD-2 mRNA expression in A549 cells seems to be at least in part mediated through nuclear inhibition of NF-kappaB transcriptional activity, but not inhibition of p38 MAPK, JNK, or PI3K. This inhibition may explain the ability of triptolide to diminish innate immune response.

Synthesis and preparation of novel 4-arm star-shape poly(carboxylic acid)s for improved light-cured glass-ionomer cements.

OBJECTIVE: The objective of this study was to synthesize and characterize novel 4-arm star-shape poly(acrylic acid)s (poly(AA)s) via atom-transfer radical polymerization (ATRP) technique, tether in situ light-curable methacrylate functionalities onto the poly(AA) backbone, use these star-shape poly(AA)s to formulate the light-cured glass-ionomer cements (LCGICs), and evaluate the mechanical strengths of the formed cements. MATERIALS AND METHODS: The 4-arm poly(AA)s were synthesized using ATRP and tethered with either 2-isocyanatoethyl methacrylate (IEM) or glycidyl methacrylate (GM). The polymers were formulated with 2-hydroxyethyl methacrylte (HEMA) or methacryloyl beta-alanine (MBA), water, initiators, and Fuji II LC filler. Compressive strength (CS) was used as a tool to evaluate the formed cements. The specimens were conditioned in distilled water at 37 degrees C for 24h prior to testing. RESULTS: The 4-arm poly(AA) showed a lower viscosity as compared to its linear counterpart. Both IEM-tethered and GM-tethered 4-arm poly(AA) constructed LCGICs showed significantly high mechanical strengths. Both types of co-monomer and grafting agent dramatically affected the mechanical strengths. The MBA-containing poly(AA) cements exhibited much higher CS than the HEMA-containing cements. The IEM-tethered poly(AA) cements showed much higher CS and DTS than the GM-tethered cements. CONCLUSIONS: This study developed a novel light-curable 4-arm star-shape poly(AA) system. The system was 13% in CS, 178% in DTS and 123% in FS, compared to Fuji II LC.

Novel injectable and in situ curable glycolide/lactide based biodegradable polymer resins and composites.

Novel in situ polymerizable liquid three-arm biodegradable oligomeric polyesters based upon glycolic acid (GA), L-lactic acid (LLA), and their copolymers are synthesized and characterized. Injectable and in situ curable polymer neat resins and their composites formulated with bioabsorbable beta-tricalcium phosphate are prepared at room temperature using photo- and redox-initiation systems, respectively. The cured neat resins show the initial compressive yield strength (YCS, MPa), modulus (M, MPa), ultimate compressive strength (UCS, MPa), and toughness (T, kN mm), ranging from 4.0 to 20.1, 201.5 to 730.2, 82.7 to 310.5, and 1.02 to 3.93. The cured composites show the initial YCS, M, UCS and T, ranging from 27.7 to 56.4, 1440 to 4870, 81.6 to 158.9, and 0.94 to 1.97. Increasing GA/LLA ratio increases all the initial compressive strengths of both neat resins and composites. Increasing filler content increases YCS and M but decreases UCS and T. A diametral tensile strength test shows the same trend as a compressive strength test. There seems to be an optimal flexural strength for the composite at the filler content around 43%. An increasing molar ratio increases curing time but decreases the degree of conversion (DC). An increasing filler content increases curing time but decreases exotherm and DC. During the course of degradation, all the materials show a burst degradation behavior within 24 h, followed by an increase in CS. The poly(glycolic acid) neat resin completely loses its strength at around Day 45. The composites completely lose their strengths at different time intervals, depending on their molar ratio and filler content. The degradation rate is found to be molar ratio and filler-content dependent.