Assessing potential human health and ecological implications of PFAS from leave-in dental products.

Contaminated water and food are the main sources of documented per- and polyfluoroalkyl substances (PFAS) exposure in humans. However, other sources may contribute to the overall PFAS intake. While several studies documented the presence of PFAS in consumer products, PFAS evaluation in dental products has been limited to floss and tape to date. This study estimated PFAS exposures from a convenience sample of leave-in dental products (night guards and whitening trays), which remain in contact with the mouth for longer durations than previously evaluated dental products. This analysis evaluated whether consumer usage of these dental products meaningfully contributes to oral exposure of PFAS. Leaching of PFAS upon disposal of products was also considered. Out of 24 PFAS measured, perfluorobutanoic acid (PFBA; 3.24-4.17 ng/product or 0.67-0.83 ng/g) and perfluorooctanesulfonic acid (PFOS; 7.25-16.45 ng/product or 1.2-2.3 ng/g) were detected in night guards, and no PFAS were detected in whitening trays. Non-targeted analysis showed additional possible PFAS, which could not be characterized. The findings showed that PFOS and/or PFBA present in night guards were unlikely to pose a health concern. From an ecological perspective, the dental products examined were shown to constitute a negligible contribution to environmental PFAS. In conclusion, the examined dental products do not represent a significant source of exposure to PFAS for humans or the environment. The study demonstrates how risk assessment can be integrated by the industry into product stewardship programs to evaluate the potential health and environmental impacts of chemicals in consumer products.

Evaluating the Impact of Hair Care Product Exposure on Hair Follicle and Scalp Health.

Human hair follicles traverse the epidermis and dermis, and are comprised of specialised cells including dermal papilla cells (DPCs). DPCs play a critical role in the development and growth of both hair and follicle structure. While exposure of DPCs to undiluted exogenous compounds is unlikely, exposure to diluted compounds is possible should dermal penetration occur. The goal of this study was to evaluate the impact on hair and scalp health following application of a hair care product. Due to the lack of standardised and validated test systems for evaluating hair follicle health, the HairSkin® model, which uses intact human scalp samples, was adapted to evaluate hair follicle and scalp health. Similarly, the Franz diffusion cell assay and matrix-assisted laser desorption ionisation-Fourier transform ion cyclotron resonance (MALDI-FTICR) were adapted to evaluate dermal penetration. The results of this study demonstrate that application of the hair care product does not result in appreciable dermal penetration, suggesting that DPCs are unlikely to be exposed to undiluted product. Additionally, hair follicle health was not impacted following product application. While this study is exploratory, these results suggest that the combination of test systems utilised herein provides valuable insight and warrants further development and validation.

Quantitative Risk Assessment of Dermal Sensitization Potential Following Use of Shampoo Products Containing the Formaldehyde Releasing Preservative DMDM Hydantoin.

Historically, formaldehyde was used as a preservative in personal care products to extend product shelf-life; however, given its skin sensitization potential it has been phased out of use and replaced with formaldehyde-releasing preservatives, such as Dimethyloldimethyl hydantoin (DMDMH). A relationship has been established between positive patch test results following exposure to DMDMH and previous sensitization to formaldehyde. Upon direct contact with the skin, formaldehyde can react with skin proteins and cause an acute inflammatory reaction, which may progress to skin sensitization following repeated exposure. This quantitative risk assessment (QRA) aimed to assess the risk of skin sensitization induction following use of shampoo products containing the maximum allowable concentrations of DMDMH in formulation (1% w/v), translating to a free formaldehyde concentration of 0.02%. To determine a margin of safety (MOS) for exposure to DMDMH from use of shampoo products, consumer exposure levels (CEL) were estimated based on typical use scenarios and then benchmarked against an acceptable exposure level (AEL). The AEL was derived using a weight of evidence approach where a range of no expected sensitization induction levels (NESILs) was utilized. The MOS values for a shampoo product containing 1% DMDMH (.02% formaldehyde) was above 1 for the typical use scenario indicating a low likelihood of skin sensitization induction among healthy individuals. Thus, it can be concluded that shampoo products containing DMDMH at or below current allowable concentrations are not expected to increase the risk of skin sensitization induction.

Estimating inhalation bioavailability for peptides and proteins 1 to 10 kDa in size.

Inhalation is a critical route for occupational exposure. To protect workers from adverse effects, health-based exposure limits (HBELs) are derived using chemical-specific information including inhalation bioavailability. Inhalation bioavailability of large proteins is well studied and generally accepted to be 1% or less. However, the inhalation bioavailability of peptides and proteins 1-10 kDa in size is not well defined. The goal of this study was to expand upon previous analyses and evaluate the inhalation bioavailability of small peptides. Inhalation bioavailability data for 72 peptides and protein samples ranging from 1.1 to 10.9 kDa in size were evaluated. The median inhalation bioavailability was 20%, which is in agreement with previously published analyses. Inhalation bioavailabilities for the vast majority were below 50%. Interestingly, species, peptide size, and peptide identity did not correlate with inhalation bioavailability. Other factors including inhalation dosimetry, peptide degradation, and chemical characteristics also decrease the amount of peptide available for absorption. Together, the median bioavailability of 20% is likely an appropriate estimate of systemic exposure and is sufficiently protective in most cases for the purposes of occupational exposure safety. Thus, in the absence of peptide-specific data or concerns, an inhalation bioavailability default of 20% is recommended for 1-10 kDa peptide and proteins.

Setting impurity limits for endogenous substances: Recommendations for a harmonized procedure and an example using fatty acids.

Endogenous substances, such as fatty, amino, and nucleic acids, are often purposefully used in parenterally pharmaceuticals, but may be present as impurities. Currently, no consensus guidance exists on setting impurity limits for these substances. Specific procedures are needed, as the amount and types of toxicity data available for endogenous substances are typically far less than those for other chemical impurities. Additionally, the parenteral route of administration of these substances is inherently non-physiological, resulting in potentially different or increased severity of toxicity. Risk Assessment Process Maps (RAPMAPs) are proposed as a model to facilitate the development of health-based exposure limits (HBELs) for endogenous substances. This yielded a framework that was applied to derive HBELs for several fatty acids commonly used in parenteral pharmaceuticals. This approach was used to derive HBELs with further vetting based on anticipated perturbations in physiological serum levels, impacts of dose-rate, and consideration of intermittent dosing. Parenteral HBELs of 100-500 mg/day were generated for several fatty acids, and a proposed class-based limit of 50 mg/day to be used in the absence of chemical-specific data. This default limit is consistent with the low toxicity of this chemical class and ICH Q3C value for Class 3 solvents.

The utility of hERG channel inhibition data in the derivation of occupational exposure limits.

Inhibition of the human ether-à-go-go (hERG) channel may lead to QT prolongation and fatal arrhythmia. While pharmaceutical drug candidates that exhibit potent hERG channel inhibition often fail early in development, many drugs with both cardiac and non-cardiac indications proceed to market. In this study, the relationship between in vitro hERG channel inhibition and published occupational exposure limit (OEL) was evaluated. A total of 23 cardiac drugs and 44 drugs with non-cardiac indications with published hERG channel IC50 and published OELs were identified. There was an apparent relationship between hERG IC50 potency and the OEL for cardiac and non-cardiac drugs. Twenty cardiac and non-cardiac drugs were identified that had a potent hERG IC50 (≤25 µM) and a contrastingly large OEL value (≥100 µg/m3). OELs or hazard banding corresponding to ≤100 µg/m3 should be sufficiently protective of effects following occupational exposure to the majority of APIs with hERG IC50 values ≤ 100 µM. It is important to consider hERG IC50 values and possible cardiac effects when deriving OEL values for drugs, regardless of indication. These considerations may be particularly important early in the drug development process for establishing exposure control bands for drugs that do not yet have full clinical safety data.

Active pharmaceutical contaminants in dietary supplements: A tier-based risk assessment approach.

The presence of active pharmaceutical ingredients (APIs) in adulterated or contaminated dietary supplements is a current product safety concern. Since there are limited guidelines, and no published consensus methods, we developed a tier-based framework incorporating typical lines of evidence for determining the human health risk associated with APIs in dietary supplements. Specifically, the tiered approach outlines hazard identification and decision to test for APIs in products based on criteria for likelihood of contamination or adulteration, and evaluation of manufacturer production standards. For products with detectable levels of APIs, a variety of default approaches, including the use of fraction of the therapeutic dose and the threshold of toxicological concern (TTC), as well as health-based exposure limits (HBELs) are applied. In order to demonstrate its practical use, as well as any limitations and/or special considerations, this framework was applied to five dietary supplements (currently available to the public). We found that the detected levels of APIs in some dietary supplements were above the recommended dose of the drugs, and thus, pose a significant health risk to consumers and potentially workers involved in manufacturing of these supplements. The results support the value of increased product quality surveillance and perhaps regulatory activity.

Derivation of an occupational exposure limit for ß-glucans.

ß-Glucans are abundant bacterial, yeast, and fungal cell wall polysaccharides that have been shown to activate the immune system. Establishment of an occupational exposure limit (OEL) for ß-glucan exposure is critical to the protection of worker health, as these exposures have been linked to immunosuppressive and inflammatory reactions and possibly the development of respiratory diseases. Detectable concentrations of ß-glucans have been identified in common occupational inhalation exposure scenarios, such as in the agricultural and waste management sectors. However, no published exposure benchmarks for inhalation of ß-glucans are available for workers or the general population. Thus, a health-based OEL for inhalation exposure of workers to ß-glucans was derived based on consideration of human and non-human effect data for this class of compounds and contemporary risk assessment methods. The weight of the evidence indicated that the available data in humans showed significant methodological limitations, such as lack of a representative study size, appropriate control population, and clear dose-response relationship. Thus, an OEL of 150 ng/m3 was derived for ß-glucans based on the most relevant nonclinical study. This OEL provides an input to the occupational risk assessment process, allows for comparisons to worker exposure, and can guide risk management and exposure control decisions.

Raf promotes dimerization of the Ras G-domain with increased allosteric connections.

Ras dimerization is critical for Raf activation. Here we show that the Ras binding domain of Raf (Raf-RBD) induces robust Ras dimerization at low surface densities on supported lipid bilayers and, to a lesser extent, in solution as observed by size exclusion chromatography and confirmed by SAXS. Community network analysis based on molecular dynamics simulations shows robust allosteric connections linking the two Raf-RBD D113 residues located in the Galectin scaffold protein binding site of each Raf-RBD molecule and 85 Å apart on opposite ends of the dimer complex. Our results suggest that Raf-RBD binding and Ras dimerization are concerted events that lead to a high-affinity signaling complex at the membrane that we propose is an essential unit in the macromolecular assembly of higher order Ras/Raf/Galectin complexes important for signaling through the Ras/Raf/MEK/ERK pathway.

Chemical mapping of tire and road wear particles for single particle analysis.

Tire and road wear particles (TRWP), which are comprised of polymer-containing tread with pavement encrustations, are generated from friction between the tire and the road. Similar to environmentally dispersed microplastic particles (MP), the fate of TRWP depends on both the mass concentration as well as individual particle characteristics, such as particle diameter and density. The identification of an individual TRWP in environmental samples has been limited by inherent characteristics of black particles, which interfere with the spectroscopic techniques most often used in MP research. The purpose of this research was to apply suitable analytical techniques, including scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDX) mapping and time-of-flight secondary ion mass spectrometry (ToF-SIMS) mapping, to characterize the specific physical and chemical properties of individual TRWP. Detailed elemental and organic surface maps were generated for numerous samples including bulk tread material, cryogenically milled tire tread particles, and TRWP generated from two separate road simulator methods. Key physical and chemical characteristics of TRWP for single particle identification included (1) elongated/round shape with variable amounts of mineral encrustation, (2) elemental surface characteristics including co-localization of (S + Zn/Na) ± (Si, K, Mg, Ca, and Al), and (3) co-localization of organic surface markers, such as C6H5+ and C7H7+. Comparisons of TRWP with other polymeric (polystyrene) and non-polymeric (carbon black) particle types demonstrated that a combination of physical and chemical markers is necessary to identify TRWP. Addition of a density separation step to the single particle analysis techniques allowed for the determination of average primary TRWP particle size (34 µm by number distribution and 49 µm by volume distribution) and aspect ratio (65% of TRWP with an aspect ratio > 1.5). The use of chemical mapping techniques, such as SEM/EDX and/or ToF-SIMS mapping as demonstrated herein, can support future research efforts that aim to identify complex MP.

Isoform-Specific Destabilization of the Active Site Reveals a Molecular Mechanism of Intrinsic Activation of KRas G13D.

Ras GTPases are mutated at codons 12, 13, and 61, with different frequencies in KRas, HRas, and NRas and in a cancer-specific manner. The G13D mutant appears in 25% of KRas-driven colorectal cancers, while observed only rarely in HRas or NRas. Structures of Ras G13D in the three isoforms show an open active site, with adjustments to the D13 backbone torsion angles and with disconnected switch regions. KRas G13D has unique features that destabilize the nucleotide-binding pocket. In KRas G13D bound to GDP, A59 is placed in the Mg2+ binding site, as in the HRas-SOS complex. Structure and biochemistry are consistent with an intermediate level of KRas G13D bound to GTP, relative to wild-type and KRas G12D, observed in genetically engineered mouse models. The results explain in part the elevated frequency of the G13D mutant in KRas over the other isoforms of Ras.

K-Ras Populates Conformational States Differently from Its Isoform H-Ras and Oncogenic Mutant K-RasG12D.

Structures of wild-type K-Ras from crystals obtained in the presence of guanosine triphosphate (GTP) or its analogs have remained elusive. Of the K-Ras mutants, only K-RasG12D and K-RasQ61H are available in the PDB representing the activated form of the GTPase not in complex with other proteins. We present the crystal structure of wild-type K-Ras bound to the GTP analog GppCH2p, with K-Ras in the state 1 conformation. Signatures of conformational states obtained by one-dimensional proton NMR confirm that K-Ras has a more substantial population of state 1 in solution than H-Ras, which predominantly favors state 2. The oncogenic mutant K-RasG12D favors state 2, changing the balance of conformational states in favor of interactions with effector proteins. Differences in the population of conformational states between K-Ras and H-Ras, as well as between K-Ras and its mutants, can provide a structural basis for focused targeting of the K-Ras isoform in cancer-specific strategies.

The K-Ras, N-Ras, and H-Ras Isoforms: Unique Conformational Preferences and Implications for Targeting Oncogenic Mutants.

Ras controls a multitude of cellular signaling processes, including cell proliferation, differentiation, and apoptosis. Deregulation of Ras cycling often promotes tumorigenesis and various other developmental disorders, termed RASopothies. Although the structure of Ras has been known for many decades, it is still one of the most highly sought-after drug targets today, and is often referred to as "undruggable." At the center of this paradoxical protein is a lack of understanding of fundamental differences in the G domains between the highly similar Ras isoforms and common oncogenic mutations, despite the immense wealth of knowledge accumulated about this protein to date. A shift in the field during the past few years toward a high-resolution understanding of the structure confirms the hypothesis that each isoform and oncogenic mutation must be considered individually, and that not all Ras mutations are created equal. For the first time in Ras history, we have the ability to directly compare the structures of each wild-type isoform to construct a "base-line" understanding, which can then be used as a springboard for analyzing the effects of oncogenic mutations on the structure-function relationship in Ras. This is a fundamental and large step toward the goal of developing personalized therapies for patients with Ras-driven cancers and diseases.

An engineered protein antagonist of K-Ras/B-Raf interaction.

Ras is at the hub of signal transduction pathways controlling cell proliferation and survival. Its mutants, present in about 30% of human cancers, are major drivers of oncogenesis and render tumors unresponsive to standard therapies. Here we report the engineering of a protein scaffold for preferential binding to K-Ras G12D. This is the first reported inhibitor to achieve nanomolar affinity while exhibiting specificity for mutant over wild type (WT) K-Ras. Crystal structures of the protein R11.1.6 in complex with K-Ras WT and K-Ras G12D offer insight into the structural basis for specificity, highlighting differences in the switch I conformation as the major defining element in the higher affinity interaction. R11.1.6 directly blocks interaction with Raf and reduces signaling through the Raf/MEK/ERK pathway. Our results support greater consideration of the state of switch I and provide a novel tool to study Ras biology. Most importantly, this work makes an unprecedented contribution to Ras research in inhibitor development strategy by revealing details of a targetable binding surface. Unlike the polar interfaces found for Ras/effector interactions, the K-Ras/R11.1.6 complex reveals an extensive hydrophobic interface that can serve as a template to advance the development of high affinity, non-covalent inhibitors of K-Ras oncogenic mutants.

The small GTPases K-Ras, N-Ras, and H-Ras have distinct biochemical properties determined by allosteric effects.

H-Ras, K-Ras, and N-Ras are small GTPases that are important in the control of cell proliferation, differentiation, and survival, and their mutants occur frequently in human cancers. The G-domain, which catalyzes GTP hydrolysis and mediates downstream signaling, is 95% conserved between the Ras isoforms. Because of their very high sequence identity, biochemical studies done on H-Ras have been considered representative of all three Ras proteins. We show here that this is not a valid assumption. Using enzyme kinetic assays under identical conditions, we observed clear differences between the three isoforms in intrinsic catalysis of GTP by Ras in the absence and presence of the Ras-binding domain (RBD) of the c-Raf kinase protein (Raf-RBD). Given their identical active sites, isoform G-domain differences must be allosteric in origin, due to remote isoform-specific residues that affect conformational states. We present the crystal structure of N-Ras bound to a GTP analogue and interpret the kinetic data in terms of structural features specific for H-, K-, and N-Ras.

The Ras-Membrane Interface: Isoform-specific Differences in The Catalytic Domain.

The small GTPase Ras is mutated in about 20% of human cancers, primarily at active site amino acid residues G12, G13, and Q61. Thus, structural biology research has focused on the active site, impairment of GTP hydrolysis by oncogenic mutants, and characterization of protein-protein interactions in the effector lobe half of the protein. The C-terminal hypervariable region has increasingly gained attention due to its importance in H-Ras, N-Ras, and K-Ras differences in membrane association. A high-resolution molecular view of the Ras-membrane interaction involving the allosteric lobe of the catalytic domain has lagged behind, although evidence suggests that it contributes to isoform specificity. The allosteric lobe has recently gained interest for harboring potential sites for more selective targeting of this elusive "undruggable" protein. The present review reveals critical insight that isoform-specific differences appear prominently at these potentially targetable sites and integrates these differences with knowledge of Ras plasma membrane localization, with the intent to better understand the structure-function relationships needed to design isoform-specific Ras inhibitors.

Isomorphic deactivation of a Pseudomonas aeruginosa oxidoreductase: The crystal structure of Ag(I) metallated azurin at 1.7 Å.

Multiple biophysical methods demonstrate that silver effectively metallates Pseudomonas aeruginosa apo-azurin in solution. X-ray crystallography of the silver-modified protein reveals that silver binds to azurin at the traditional copper mediated active site with nearly identical geometry. Cyclic voltammetry indicates that the silver adduct is redox inert. Our results suggest that a potential mechanism for the microbial toxicity of silver is the deactivation of copper oxidoreductases by the effective binding and structural mimicry by silver without the corresponding function.