Ligand Control in Co-Catalyzed Regio- and Enantioselective Hydroboration: Homoallyl Secondary Boronates via Uncommon 4,3-Hydroboration of 1,3-Dienes.

Enantiopure homoallylic boronate esters are versatile intermediates because the C-B bond in these compounds can be stereospecifically transformed into C-C, C-O, and C-N bonds. Regio- and enantioselective synthesis of these precursors from 1,3-dienes has few precedents in the literature. We have identified reaction conditions and ligands for the synthesis of nearly enantiopure (er >97:3 to >99:1) homoallylic boronate esters via a rarely seen cobalt-catalyzed [4,3]-hydroboration of 1,3-dienes. Monosubstituted or 2,4-disubstituted linear dienes undergo highly efficient regio- and enantioselective hydroboration with HBPin catalyzed by [(L*)Co]+[BARF]-, where L* is typically a chiral bis-phosphine ligand with a narrow bite angle. Several such ligands (e.g., i-PrDuPhos, QuinoxP*, Duanphos, and BenzP*) that give high enantioselectivities for the [4,3]-hydroboration product have been identified. In addition, the equally challenging problem of regioselectivity is uniquely solved with a dibenzooxaphosphole ligand, (R,R)-MeO-BIBOP. A cationic cobalt(I) complex of this ligand is a very efficient (TON >960) catalyst while also providing excellent regioselectivities (rr >98:2) and enantioselectivities (er >98:2) for a broad range of substrates. A detailed computational investigation of the reactions using Co complexes from two widely different ligands (BenzP* and MeO-BIBOP) employing the B3LYP-D3 density functional theory provides key insights into the mechanism and the origins of selectivities. The computational results are in full agreement with the experiments. For the complexes we have examined thus far, the relative stabilities of the diastereomeric diene-bound complexes [(L*)Co(η4-diene)]+ lead to the initial diastereofacial selectivity, which in turn is retained in the subsequent steps, providing exceptional enantioselectivity for the reactions.

Activator-free single-component Co(I)-catalysts for regio- and enantioselective heterodimerization and hydroacylation reactions of 1,3-dienes. New reduction procedures for synthesis of [L]Co(I)-complexes and comparison to in situ generated catalysts.

Although cobalt(I) bis-phosphine complexes have been implicated in many selective C-C bond-forming reactions, until recently relatively few of these compounds have been fully characterized or have been shown to be intermediates in catalytic reactions. In this paper we present a new practical method for the synthesis and isolation of several cobalt(I)-bis-phosphine complexes and their use in Co(I)-catalyzed reactions. We find that easily prepared (in situ generated or isolated) bis-phosphine and (2,6-N-aryliminoethyl)pyridine (PDI) cobalt(II) halide complexes are readily reduced by 1,4-bis-trimethylsilyl-1,4-dihydropyrazine or commercially available lithium nitride (Li3N), leaving behind only innocuous volatile byproducts. Depending on the structures of the bis-phosphines, the cobalt(I) complex crystallizes as a phosphine-bridged species [(P∼P)(X)CoI[µ-(P∼P)]CoI(X)(P∼P)] or a halide-bridged species [(P∼P)CoI[µ-(X)]2CoI(P∼P)]. Because the side-products are innocuous, these methods can be used for the in situ generation of catalytically competent Co(I) complexes for a variety of low-valent cobalt-catalyzed reactions of even sensitive substrates. These complexes are also useful for the synthesis of rare cationic [(P∼P)CoI-η4-diene]+ X- or [(P∼P)CoI-η6-arene]+ X- complexes, which are shown to be excellent single-component catalysts for the following regioselective reactions of dienes: heterodimerizations with ethylene or methyl acrylate, hydroacylation and hydroboration. The reactivity of the single-component catalysts with the in situ generated species are also documented.

A New Paradigm in Enantioselective Cobalt Catalysis: Cationic Cobalt(I) Catalysts for Heterodimerization, Cycloaddition, and Hydrofunctionalization Reactions of Olefins.

One of the major challenges facing organic synthesis in the 21st century is the utilization of abundantly available feedstock chemicals for fine chemical synthesis. Regio- and enantioselective union of easily accessible 1,3-dienes and other feedstocks like ethylene, alkyl acrylates, and aldehydes can provide valuable building blocks adorned with latent functionalities for further synthetic elaboration. Through an approach that relies on mechanistic insights and systematic examination of ligand and counterion effects, we developed an efficient cobalt-based catalytic system [(P∼P)CoX2/Me3Al] (P∼P = bisphosphine) to effect the first enantioselective heterodimerization of several types of 1,3-dienes with ethylene. In addition to simple cyclic and acyclic dienes, siloxy-1,3-dienes participate in this reaction, giving highly functionalized, nearly enantiopure silyl enolates, which can be used for subsequent C-C and C-X bond-forming reactions. As our understanding of the mechanism of this reaction improved, our attention was drawn to more challenging partners like alkyl acrylates (one of the largest volume feedstocks) as the olefin partners instead of ethylene. Prompted by the intrinsic limitations of using aluminum alkyls as the activators for this reaction, we explored the fundamental chemistry of the lesser known (P∼P)Co(I)X species and discovered that in the presence of halide sequestering agents, such as sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (NaBARF) or (C6F5)3B, certain chiral bisphosphine complexes are superb catalysts for regio- and enantioselective heterodimerization of 1,3-dienes and alkyl acrylates. We have since found that these cationic Co(I) catalysts, most conveniently prepared in situ by reduction of the corresponding cobalt(II) halide complexes by zinc in the presence of NaBARF, promote enantioselective [2 + 2]-cycloaddition between alkynes and an astonishing variety of alkenyl derivatives to give highly functionalized cyclobutenes. In reactions between 1,3-enynes and ethylene, the [2 + 2]-cycloaddition between the alkyne and ethylene is followed by a 1,4-addition of ethylene in a tandem fashion to give nearly enantiopure cyclobutanes with an all-carbon quaternary center, giving a set of molecules that maps well into many medicinally relevant compounds. In another application, we find that the cationic Co(I)-catalysts promote highly selective hydroacylation and 1,2-hydroboration of prochiral 1,3-dienes. Further, we find that a cationic Co(I)-catalyst promotes cycloisomerization followed by hydroalkenylation of 1,6-enynes to produce highly functionalized carbo- and heterocyclic compounds. Surprisingly the regioselectivity of the alkene addition depends on whether it is a simple alkene or an acrylate, and the acrylate addition produces an uncommon Z-adduct. This Account will provide a summary of the enabling basic discoveries and the attendant developments that led to the unique cationic Co(I)-complexes as catalysts for disparate C-C and C-B bond-forming reactions. It is our hope that this Account will stimulate further work with these highly versatile catalysts which are derived from an earth-abundant metal.

α- and ß-Functionalized Ketones from 1,3-Dienes and Aldehydes: Control of Regio- and Enantioselectivity in Hydroacylation of 1,3-Dienes.

Ketones are among the most widely used intermediates in organic synthesis, and their synthesis from inexpensive feedstocks could be quite impactful. Regio- and enantioselective hydroacylation reactions of dienes provide facile entry into useful ketone-bearing chiral motifs with an additional latent functionality (alkene) suitable for further elaboration. Three classes of dienes, 2- or 4-monosubstituted and 2,4-disubstituted 1,3-dienes, undergo cobalt(I)-catalyzed regio- and enantioselective hydroacylation, giving products with high enantiomeric ratios (er). These reactions are highly dependent on the ligands, and we have identified the most useful ligands and reaction conditions for each class of dienes. 2-Substituted and 2,4-disubstituted dienes predominantly undergo 1,2-addition, whereas 4-substituted terminal dienes give highly enantioselective 4,1- or 4,3-hydroacylation depending on the aldehyde, aliphatic aldehydes giving 4,1-addition and aromatic aldehydes giving 4,3-addition. Included among the substrates are feedstock dienes, isoprene (US$1.4/kg) and myrcene (US$129/kg), and several common aldehydes. We propose an oxidative dimerization mechanism that involves a Co(I)/Co(III) redox cycle that appears to be initiated by a cationic Co(I) intermediate. Studies of reactions using isolated neutral and cationic Co(I) complexes confirm the critical role of the cationic intermediates in these reactions. Enantioselective 1,2-hydroacylation of 2-trimethylsiloxy-1,3-diene reveals a hitherto undisclosed route to chiral siloxy-protected aldols. Finally, facile syntheses of the anti-inflammatory drug (S)-Flobufen (2 steps, 92% yield, >99:1 er) and the food additive (S)-Dihydrotagetone (1 step, 83% yield; 96:4 er) from isoprene illustrate the power of this method for the preparation of commercially relevant compounds.

Mechanism of Cobalt-Catalyzed Heterodimerization of Acrylates and 1,3-Dienes. A Potential Role of Cationic Cobalt(I) Intermediates.

Coupling reactions of feedstock alkenes are promising, but few of these reactions are practiced industrially. Even though recent advances in the synthetic methodology have led to excellent regio- and enantioselectivies in the dimerization reactions between 1,3-dienes and acrylates, the efficiency as measured by the turnover numbers (TON) in the catalyst has remained modest. Through a combination of reaction progress kinetic analysis (RPKA) of a prototypical dimerization reaction, characterization of isolated low-valent cobalt catalyst precursors involved, several important details of the mechanism of this reaction have emerged. (i) The prototypical reaction has an induction period that requires at least two hours of stir time to generate the competent catalyst. (ii) Reduction of a Co(II) complex to a Co(I) complex, and subsequent generation of a cationic [Co(I)]+ species are responsible for this delay. (iii) Through RPKA using in situ IR spectroscopy, same excess experiments reveal inhibition by the product towards the end of the reaction and no catalyst deactivation is observed as long as diene is present in the medium. The low TON observed is most likely the result of the inherent instability of the putative cationic Co(I)-species that catalyzes the reaction. (iv) Different excess experiments suggest that the reaction is first order in the diene and zero order in the acrylate. (v) Catalyst loading experiments show that the catalyst is first order. The orders in the various regents were further confirmed by Variable Time Normalization Analysis (VTNA). (vi) A mechanism based on oxidative dimerization [via Co(I)/Co(III)-cycle] is proposed. Based on the results of this study, it is possible to increase the TON by a factor of 10 by conducting the reaction at an increased concentration of the starting materials, especially, the diene, which seems to stabilize the catalytic species.

Catalytic Enantioselective Synthesis of Cyclobutenes from Alkynes and Alkenyl Derivatives.

Discovery of enantioselective catalytic reactions for the preparation of chiral compounds from readily available precursors, using scalable and environmentally benign chemistry, can greatly impact their design, synthesis, and eventually manufacture on scale. Functionalized cyclobutanes and cyclobutenes are important structural motifs seen in many bioactive natural products and pharmaceutically relevant small molecules. They are also useful precursors for other classes of organic compounds such as other cycloalkane derivatives, heterocyclic compounds, stereodefined 1,3-dienes, and ligands for catalytic asymmetric synthesis. The simplest approach to make cyclobutenes is through an enantioselective [2 + 2]-cycloaddition between an alkyne and an alkenyl derivative, a reaction which has a long history. Yet known reactions of this class that give acceptable enantioselectivities are of very narrow scope and are strictly limited to activated alkynes and highly reactive alkenes. Here, we disclose a broadly applicable enantioselective [2 + 2]-cycloaddition between wide variety of alkynes and alkenyl derivatives, two of the most abundant classes of organic precursors. The key cycloaddition reaction employs catalysts derived from readily synthesized ligands and an earth-abundant metal, cobalt. Over 50 different cyclobutenes with enantioselectivities in the range of 86-97% ee are documented. With the diverse functional groups present in these compounds, further diastereoselective transformations are easily envisaged for synthesis of highly functionalized cyclobutanes and cyclobutenes. Some of the novel observations made during these studies including a key role of a cationic Co(I)-intermediate, ligand and counterion effects on the reactions, can be expected to have broad implications in homogeneous catalysis beyond the highly valuable synthetic intermediates that are accessible by this route.

Cationic Co(I)-Intermediates for Hydrofunctionalization Reactions: Regio- and Enantioselective Cobalt-Catalyzed 1,2-Hydroboration of 1,3-Dienes.

Much of the recent work on catalytic hydroboration of alkenes has focused on simple alkenes and styrene derivatives with few examples of reactions of 1,3-dienes, which have been reported to undergo mostly 1,4-additions to give allylic boronates. We find that reduced cobalt catalysts generated from 1,n- bis-diphenylphosphinoalkane complexes [Ph2P-(CH2) n-PPh2]CoX2; n = 1-5) or from (2-oxazolinyl)phenyldiarylphosphine complexes [(G-PHOX)CoX2] (G = 4-substituent on oxazoline ring) effect selective 1,2-, 1,4-, or 4,3-additions of pinacolborane (HBPin) to a variety of 1,3-dienes depending on the ligands chosen. Conditions have been found to optimize the 1,2-additions. The reactive catalysts can be generated from the cobalt(II)-complexes using trimethylaluminum, methyl aluminoxane, or activated zinc in the presence of sodium tetrakis[(3,5-trifluoromethyl)phenyl]borate (NaBARF). The complex, (dppp)CoCl2, gives the best results (ratio of 1,2- to 1,4-addition >95:5) for a variety of linear terminal 1,3-dienes and 2-substituted 1,3-dienes. The [(PHOX)CoX2] (X = Cl, Br) complexes give mostly 1,4-addition with linear unsubstituted 1,3-dienes, but, surprisingly, selective 1,2-additions with 2-substituted or 2,3-disubstituted 1,3-dienes. Isolated and fully characterized (X-ray crystallography) Co(I)-complexes, (dppp)3Co2Cl2 and [( S,S)-BDPP]3Co2Cl2, do not catalyze the reaction unless activated by a Lewis acid or NaBARF, suggesting a key role for a cationic Co(I) species in the catalytic cycle. Regio- and enantioselective 1,2-hydroborations of 2-substituted 1,3-dienes are best accomplished using a catalyst prepared via activation of a chiral phosphinooxazoline-cobalt(II) complex with zinc and NaBARF. A number of common functional groups, among them, -OBn, -OTBS, -OTs, N-phthalimido- groups, are tolerated, and er's > 95:5 are obtained for several dienes including 1-alkenylcycloalk-1-enes. This operationally simple reaction expands the realm of asymmetric hydroboration to provide direct access to a number of nearly enantiopure homoallylic boronates, which are not readily accessible by current methods. The resulting boronates have been converted into the corresponding alcohols, potassium trifluororoborate salts, N-BOC amines, and aryl derivatives by C-BPin to C-aryl transformation.

Enantiospecific total syntheses of meroterpenoids (-)-F1839-I and (-)-corallidictyals B and D.

Enantiospecific total syntheses of spiromeroterpenoid natural products (-)-F1839-I and (-)-corallidictyals B and D were achieved using the environmentally benign and highly atom economical Lewis acid catalysed Friedel-Crafts reaction and a highly regio- and stereoselective spirocyclic C-O bond formation reaction.