Robust Spin Interconnect with Isotropic Spin Dynamics in Chemical Vapor Deposited Graphene Layers and Boundaries.

The utilization of large-area graphene grown by chemical vapor deposition (CVD) is crucial for the development of scalable spin interconnects in all-spin-based memory and logic circuits. However, the fundamental influence of the presence of multilayer graphene patches and their boundaries on spin dynamics has not been addressed yet, which is necessary for basic understanding and application of robust spin interconnects. Here, we report universal spin transport and dynamic properties in specially devised single layer, bilayer, and trilayer graphene channels and their layer boundaries and folds that are usually present in CVD graphene samples. We observe uniform spin lifetime with isotropic spin relaxation for spins with different orientations in graphene layers and their boundaries at room temperature. In all of the inhomogeneous graphene channels, the spin lifetime anisotropy ratios for spins polarized out-of-plane and in-plane are measured to be close to unity. Our analysis shows the importance of both Elliott-Yafet and D'yakonov-Perel' mechanisms with an increasing role of the latter mechanism in multilayer channels. These results of universal and isotropic spin transport on large-area inhomogeneous CVD graphene with multilayer patches and their boundaries and folds at room temperature prove its outstanding spin interconnect functionality, which is beneficial for the development of scalable spintronic circuits.

Strain Effects on the Energy-Level Alignment at Metal/Organic Semiconductor Interfaces.

Flexible and wearable devices are among the upcoming trends in the opto-electronics market. Nevertheless, bendable devices should ensure the same efficiency and stability as their rigid analogs. It is well-known that the energy barriers between the metal Fermi energy and the molecular levels of organic semiconductors devoted to charge transport are key parameters in the performance of organic-based electronic devices. Therefore, it is paramount to understand how the energy barriers at metal/organic semiconductor interfaces change with bending. In this work, we experimentally measure the interface energy barriers between a metallic contact and small semiconducting molecules. The measurements are performed in operative conditions, while the samples are bent by a controlled applied mechanical strain. We determine that energy barriers are not sensitive to bending of the sample, but we observe that the hopping transport of the charges in flat molecules can be tuned by mechanical strain. The theoretical model developed for this work confirms our experimental observations.

A molecular spin-photovoltaic device.

We fabricated a C60 fullerene-based molecular spin-photovoltaic device that integrates a photovoltaic response with the spin transport across the molecular layer. The photovoltaic response can be modified under the application of a small magnetic field, with a magnetophotovoltage of up to 5% at room temperature. Device functionalities include a magnetic current inverter and the presence of diverging magnetocurrent at certain illumination levels that could be useful for sensing. Completely spin-polarized currents can be created by balancing the external partially spin-polarized injection with the photogenerated carriers.

Graphene as an electrode for solution-processed electron-transporting organic transistors.

Organic field-effect transistors (OFETs) are fundamental building blocks for plastic electronics such as organic photovoltaics or bendable displays with organic light emitting diodes, and radio-frequency identification (RFID) tags. A key part in the performance of OFET is the organic material constituting the channel. OFETs based on solution-processed polymers represent a new class of organic electronic devices. Recent developments in upscale solution-processed polymers have advanced towards high throughput, low-cost, and environmentally friendly materials for high-performance applications. Together with the integration of high performance materials, another enduring challenge in OFET development is the improvement and control of the injection of charge carriers. Graphene, a two-dimensional layer of covalently bonded carbon atoms, is steadily making progress into applications relying on van der Waals heterointerfaces with organic semiconductors. Here, we demonstrate the versatile operation of solution-processed organic transistors both in lateral and vertical geometries by exploiting the weak-screening effect and work function modulation properties of graphene electrodes. Our results demonstrate a general strategy for overcoming traditional noble metal electrodes and to integrate graphene with solution-processed Polyera ActiveInk™ N2200 polymer transistors for high-performance devices suitable for future plastic electronics.

Energy Level Alignment at Metal/Solution-Processed Organic Semiconductor Interfaces.

Energy barriers between the metal Fermi energy and the molecular levels of organic semiconductor devoted to charge transport play a fundamental role in the performance of organic electronic devices. Typically, techniques such as electron photoemission spectroscopy, Kelvin probe measurements, and in-device hot-electron spectroscopy have been applied to study these interfacial energy barriers. However, so far there has not been any direct method available for the determination of energy barriers at metal interfaces with n-type polymeric semiconductors. This study measures and compares metal/solution-processed electron-transporting polymer interface energy barriers by in-device hot-electron spectroscopy and ultraviolet photoemission spectroscopy. It not only demonstrates in-device hot-electron spectroscopy as a direct and reliable technique for these studies but also brings it closer to technological applications by working ex situ under ambient conditions. Moreover, this study determines that the contamination layer coming from air exposure does not play any significant role on the energy barrier alignment for charge transport. The theoretical model developed for this work confirms all the experimental observations.

Gate-tunable diode and photovoltaic effect in an organic-2D layered material p-n junction.

The semiconducting p-n junction is a simple device structure with great relevance for electronic and optoelectronic applications. The successful integration of low-dimensional materials in electronic circuits has opened the way forward for producing gate-tunable p-n junctions. In that context, we present here an organic (Cu-phthalocyanine)-2D layered material (MoS2) hybrid p-n junction with both gate-tunable diode characteristics and photovoltaic effect. Our proof-of-principle devices show multifunctional properties with diode rectifying factors of up to 10(4), while under light exposure they exhibit photoresponse with a measured external quantum efficiency of ∼11%. As for their photovoltaic properties, we found open circuit voltages of up to 0.6 V and optical-to-electrical power conversion efficiency of 0.7%. The extended catalogue of known organic semiconductors and two-dimensional materials offer the prospect for tailoring the properties and the performance of the resulting devices, making organic-2D p-n junctions promising candidates for future technological applications.

Hot electron transport in a strongly correlated transition-metal oxide.

Oxide heterointerfaces are ideal for investigating strong correlation effects to electron transport, relevant for oxide-electronics. Using hot-electrons, we probe electron transport perpendicular to the La0.7Sr0.3MnO3 (LSMO)- Nb-doped SrTiO3 (Nb:STO) interface and find the characteristic hot-electron attenuation length in LSMO to be 1.48 ± 0.10 unit cells (u.c.) at -1.9 V, increasing to 2.02 ± 0.16 u.c. at -1.3 V at room temperature. Theoretical analysis of this energy dispersion reveals the dominance of electron-electron and polaron scattering. Direct visualization of the local electron transport shows different transmission at the terraces and at the step-edges.