Instability of an aromatic amine in fatty food and fatty food simulant: characterisation of reaction products and prediction of their toxicity.

It is a well-known fact that amines are not stable in food of a fatty nature. In this study the synthesis and characterisation of the products obtained as a result of the reaction of amines in a fatty medium are reported. Based on the well-known reactions among amines and acid and esters groups, two novel compounds were synthesised using m-xylylenediamine (mXDA), a primary diamine widely used as monomer in the manufacture of food contact materials and two fatty acids, oleic acid and palmitic acid, which occur in most fats. The resulting compounds were two molecules belonging to the family of fatty acid amides, dioleamide and dipalmitamide. A complete characterisation of both products was carried out employing several techniques such as infrared spectroscopy, (1)H- and (13)C-NMR spectroscopy, electron ionisation mass spectrometry, LC-MS/MS and UV spectrometry. The results obtained by the different techniques were well correlated. In the second part of the work, the formation of these compounds in real samples was evaluated. For this purpose a certain volume of olive oil was spiked with a known amount of mXDA. Olive oil was selected as a fatty medium since it is a widely consumed food and additionally is used as a fatty food simulant in migration studies of food contact materials. A method was developed to extract the fatty acid amides from the fatty matrix, which were then identified by LC-MS/MS. The toxicity of the synthesised compounds was predicted using a toxicity estimation software tool.

Development of a rapid screening method to determine primary aromatic amines in kitchen utensils using direct analysis in real time mass spectrometry (DART-MS).

Primary aromatic amines (PAAs) are a group of substances with undesirable health effects, that are used in a variety of commercial products. Several recent studies, using a number of screening and confirmatory methods, have reported the migration of PAAs from some kitchen utensils into acetic acid 3% (w/v). Many of these methods require significant sample preparation, therefore the aim of this work was to determine if direct analysis in real time mass spectrometry (DART-MS) could be utilised as a rapid screening tool for the determination of PAAs in kitchen utensils. DART-MS results from direct analysis of the utensil have been compared with results of PAA migration by ultra high performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) method. The UPLC-MS/MS method had excellent linearity, appropriate sensitivity (LOD ≤ 1.5 µg L(-1); LOQ ≤ 4.5 µg L(-1)), repeatability from 2.4 to 13.2% and acceptable recoveries. DART-MS results were in good agreement with UPLC-MS/MS data, with 100% of non-compliant (PAA positive) samples successfully identified by DART-MS.

Analytical method for the simultaneous determination of polyfunctional amines used as monomers in the manufacture of food packaging materials.

This paper describes the development of a multi-analyte method for the determination of polyfunctional amines commonly used as monomers in the manufacture of food contact materials. Amines were analyzed by high-performance-liquid chromatography with diode-array detection (HPLC-DAD) after derivatization with dansyl chloride. The chromatographic analysis and the derivatization conditions were optimized. The proposed method was validated in terms of linearity, limits of detection and repeatabilities. The method showed an excellent sensitivity (LOD≤0.05 µg/mL) and appropriate repeatabilites (RSD (n=7)≤5%)). LC-MS/MS was used as a confirmatory technique. The stability of the amines in five food simulants (distilled water, 3% acetic acid, 10% ethanol, 50% ethanol and olive oil) under the most common testing conditions (10 days at 40 °C) was also studied. Results showed that amines had an acceptable stability in aqueous simulants but in the olive oil a loss of 100% was observed for all analytes.

Rapid multi-analyte quantification of benzophenone, 4-methylbenzophenone and related derivatives from paperboard food packaging.

Photo-initiators are used in printing inks hardened with UV light and one of the most commonly used photo-initiators is benzophenone (BP). Recent notifications under the Rapid Alert System for Food and Feed have shown migration of 4-methylbenzophenone (4-MBP) from packaging into cereals. A specific migration limit exists for BP of 0.6 mg kg(-1) for its use as an additive in plastics. There is no specific European legislation covering cardboard boxes and/or printing inks for food contact use. However, due to the high levels detected, the European Food Safety Authority (EFSA) published recommendations and the Standing Committee for the Food Chain and Animal Health endorsed a limit of 0.6 mg kg(-1) for the sum of BP and 4-MBP. While studies have been published on photo-initiators in the past, there is a fundamental lack of data on 4-MBP especially for its combined analysis with others. We present an HPLC method with diode array detector to simultaneously determine the levels of BP, 4-MBP as well as 7 other possible derivatives from secondary packaging for food applications. The method was tested and applied to 46 samples of paperboard for secondary packaging collected both from supermarkets and directly from a paperboard supplier. In addition, a survey was conducted on recycled paperboard (n = 19) collected from a supplier, to evaluate the background quantity of BP and other derivatives in recycled board. The most abundant photo-initiator found in the survey was BP, in 61% of samples, and 4-MBP was found in 30% of the samples. It seems that these compounds are used to replace one another. Other derivatives were found in minor quantities. Traces of BP were also found in 42% of the samples of recycled, unprinted board.