Removal of heavy metals and arsenic from contaminated soils using bioremediation and chelant extraction techniques.

A combined chemical and biological treatment scheme was evaluated in this study aiming at obtaining the simultaneous removal of metalloid arsenic and cationic heavy metals from contaminated soils. The treatment involved the use of the iron reducing microorganism Desulfuromonas palmitatis, whose activity was combined with the chelating strength of EDTA. Taking into consideration that soil iron oxides are the main scavengers of As, treatment with iron reducing microorganisms aimed at inducing the reductive dissolution of soil oxides and thus obtaining the release of the retained As. The main objective of using EDTA was the removal of metal contaminants, such as Pb and Zn, through the formation of soluble metal chelates. Experimental results however indicated that EDTA was also indispensable for the biological reduction of Fe(III) oxides. The bacterial activity was found to have a pronounced positive effect on the removal of arsenic, which increased from the value of 35% obtained during the pure chemical treatment up to 90% in the presence of D. palmitatis. In the case of Pb, the major part, i.e. approximately 85%, was removed from soil with purely chemical mechanisms, whereas the biological activity slightly improved the extraction, increasing the final removal up to 90%. Co-treatment had negative effect only for Zn, whose removal was reduced from 80% under abiotic condition to approximately 50% in the presence of bacteria.

Potential use of lignite fly ash for the control of acid generation from sulphidic wastes.

In the present paper, the potential use of lignite fly ash in the control of acid generation from sulphidic tailings disposed of at Lavrion, Greece was studied. Long-term laboratory column kinetic tests were performed on tailings containing 27% S, which were homogeneously mixed with various amounts of fly ash, ranging from 10 to 63% w/w. The drainage quality of the columns was monitored over a test period of 600 days. Chemical and mineralogical characterisation of column solid residues was performed after a 270-day test period. The hydraulic conductivity of the mixtures was also measured to evaluate the potential of fly ash to form a low permeability layer. Based on the results, the addition of fly ash to sulphidic tailings, even at the lower amount, increased the pH of the drainage at values of 8.6-10.0 and decreased the dissolved concentrations of contaminants, mainly Zn and Mn, to values that meet the European regulatory limits for potable water. Higher fly ash addition to tailings, at amounts of 31 and 63% w/w also reduced the water permeability of material from 1.2 x 10(-5) cm/sec to 3 x 10(-7) and 2.5 x 10(-8) m/s, respectively.