ABSTRACT
While tissue engineered blood vessels have entered surgical practice, the construction of artificial lymphatic vessels has never been attempted due to the small dimensions and fragility of lymphatic vessels. A possible alternative would be to obtain a new growth of interrupted lymphatic vessels. We have previously reported that lymphatic endothelial cells align when cultured on striped micropatterns of hyaluronan (Hyal) and aminosilanized glass. We here report a comparative study in which lymphatic endothelial cells have been plated on micropatterns with stripes of different width and height obtained by the photoimmobilization of Hyal and its sulphated derivative (HyalS) on aminosilanized glass to verify whether their response correlated with surface-chemistry andlor topography. On Hyal micropatterns, cells adhered to aminosilanized glass, avoiding Hyal stripes and molding their shape in accordance to the micropattern topography. Stress fibers, integrins and focal adhesion kinase organized accordingly. HyalS micropatterns with the same topography were unable to guide cell response, cells randomly adhered to HyalS and glass stripes, and polarization was attained only by increasing stripe height. These data indicate that surface chemistry is the main cue responsible for lymphatic endothelial cell guidance. When surface chemistry of stripes promotes cell adhesion as well as that of the substrate, topographical parameters become prevalent. Micropatterns with defined chemical and topographical properties may contribute to the design of new platforms for controlled cell growth in tissue engineering of lymphatic vessels.
Subject(s)
Cell Adhesion , Cell Proliferation , Endothelial Cells/physiology , Endothelium, Lymphatic/physiology , Hyaluronic Acid/chemistry , Actins/analysis , Animals , Cattle , Cell Count , Cell Culture Techniques , Endothelial Cells/chemistry , Endothelial Cells/cytology , Endothelium, Lymphatic/chemistry , Fluorescent Dyes/chemistry , Focal Adhesion Protein-Tyrosine Kinases/analysis , Glass , Hyaluronic Acid/analogs & derivatives , Integrin alphaV/analysis , Lipoproteins, LDL/chemistry , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Surface PropertiesABSTRACT
The effect of fibronectin protein (Fn) coating onto polysaccharide layers of hyaluronic acid (Hyal) and its sulfated derivative (HyalS) on fibroblast cell adhesion was analyzed. The Hyal or HyalS were coated and grafted on the glass substrate by a photolithographic method. The Fn coating was achieved by two different routes: the immobilization of Fn by covalent bond to the polysaccharide layers and the simple adsorption of Fn onto Hyal and HyalS surfaces. AFM, SEM, and ATR-FTIR techniques were used for the chemical and topographical characterization of the surfaces. According to AFM and SEM data, the surface topography was dependent on the method used to cover the polysaccharide layers with the protein. ATR-FTIR analysis supplied information about the rearrangement of Fn after the interaction (adsorption or binding) with the Hyal and the HyalS. The conformational changes of the Fn were minimal when it was simply adsorbed on HyalS surfaces and larger once bound, whereas on the Hyal layer the protein underwent a bigger conformational change once adsorbed and covalently grafted. Then, the biological characterization was carried out by analyzing the human diploid skin fibroblasts adhesion on these surfaces. The morphology of fibroblasts was evaluated by SEM, whereas the dynamics of fibroblasts movement were recorded by a time-lapse system. Cell variations in area, perimeter, and length were analyzed at 2, 4, and 6 h. It was found that the addition of Fn (covalently bound or merely adsorbed) was fundamental in the promotion of fibroblasts adhesion and spreading. The greatest adhesion occurred onto HyalS layers covered by the adsorbed Fn.
Subject(s)
Cell Adhesion , Fibroblasts/cytology , Fibronectins/metabolism , Hyaluronic Acid , Adsorption , Cell Movement , Cell Shape , Humans , Kinetics , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Protein Conformation , Spectroscopy, Fourier Transform Infrared , Sulfates , Surface PropertiesABSTRACT
The implant of a biocompatible device capable of guiding lymphatic vessel regeneration in patients who underwent removal of lymph nodes might contribute to restoring an efficient lymphatic drainage and help to prevent the occurrence of lymphedema. The aim of this study was to evaluate whether a microstructured surface could provide a guidance for the growth of cultured lymphatic endothelial cells. The presence of microstructures on a surface permits the control of cell adhesion, migration, proliferation, and differentiation. We report here that lymphatic endothelial cells align on microstructures of alternating hyaluronan and aminosylanized glass stripes obtained by photoimmobilization. Cells consistently spread and proliferate only on aminosylanized glass. They orient parallel to the longitudinal axis of the stripe. A pattern of alternating stripes of aminosylanized glass uniformly covered by elongated cells and of hyaluronan devoid of cells eventuallyforms. The presence of alpha(v)-integrins along cell borders of cells in search of contact with each other and at the leading edge of migrating cells, sites where new focal adhesions are presumably formed, indicates that integrin-mediated adhesion to the substrate guides cell migration along the microstructure. Micropatterned surfaces of hyaluronan thus proved to adequately orient the growth of cells allowing the regeneration of lymphatic endothelium in the desired direction.
Subject(s)
Hyaluronic Acid/physiology , Lymphatic System/physiology , Animals , Cattle , Endothelium, Lymphatic/cytology , Endothelium, Lymphatic/physiology , Humans , Hyaluronic Acid/metabolism , RegenerationABSTRACT
This review looks at the present literature available regarding cell response to nano-islands produced by nanotopography. Polymer demixing is a chemical method of fabricating large areas of nanotopography quickly and cheaply, making it ideal for cell testing and thus allowing it to be one of the first well-researched methods in cell engineering. The review shows that cells respond strongly to the islands (cell types observed include endothelial cells, fibroblasts, osteoblasts, leucocytes and platelets). Such changes include differences in adhesion, growth, gene expression and morphology.
ABSTRACT
We analyse the leucocyte and endothelial cell response to polybromostyrene-polystyrene (PS/PBrS) and the poly-n-butylmethacrylate-polystyrene (PnBMA/PS) systems, both in flat form or nanostructured surfaces consisting of nanohills with increasing hill height (13-95nm). Experiments were carried out first with blood leucocytes alone, endothelial cells (of three different types) alone, and finally, using blood cells and endothelized nanosurfaces. Blocking monoclonal antibodies specific for CD11, CD29, CD31, CD54, CD166 were used to analyse whether and to what extent adhesion molecules could be involved in the adherence of both blood leucocytes and endothelial cells to different nanosurfaces. Expression of CD29 (beta-1 integrin), CD54 (ICAM-1) and CD166 (ALCAM) on blood leucocytes was dependent on the hill height, being most prominent with 13nm (PS/PBrS) and 45nm hill (PnBMA/PS) nanosurfaces. Adherence of a human microvascular endothelial cell line and umbilical primary endothelial cells was also related to hill height, being most prominent with 13nm hill height. An indirect correlation was observed between the extent of endothelization and the degree of leucocyte adherence. In cases of low to medium extent of endothelization, the adherence of monocytes and granulocytes was mediated by the expression of CD166, CD29 and CD11a (alpha-L integrin), CD29, CD31 (PECAM-1), respectively. Scanning electron microscopy studies showed the predominant emission of pseudopodia at the holes of the surfaces and the focal contacts with the nanosurfaces. Our studies emphasize the relevance of testing functional properties in co-culture experiments in the development and optimization of nanosurfaces for biomedical application.
Subject(s)
Endothelium, Vascular/cytology , Endothelium, Vascular/physiology , Leukocytes, Mononuclear/cytology , Leukocytes, Mononuclear/physiology , Nanotechnology/methods , Polystyrenes , Cell Adhesion/physiology , Cells, Cultured , Crystallization/methods , Endothelium, Vascular/ultrastructure , Humans , Leukocytes, Mononuclear/ultrastructure , Materials Testing , Umbilical Veins/cytology , Umbilical Veins/physiologyABSTRACT
Surface microfabrication techniques were widely utilised for the spatial control of in vitro cell behaviour. A photo-immobilisation procedure was utilised to create micropatterned surfaces: four different stripe patterns (100, 50, 25 and 10 microm) of hyaluronan (Hyal) and its sulphated derivative (HyalS) on silanised glass substrate were obtained.The morphological analysis showed that the surface topography showed regular stripes of 100, 50, 25 and 10 microm wide and ranging from 300 nm up to 1 microm in thickness. They reproduced the exact photo-mask pattern: glass stripes alternating with polysaccharide ones. On the contrary, Hyal microstructures showed just a topographic pattern as the glass stripes appeared to be covered by a thin layer of the macromolecule by TOF-SIMS. Cell adhesion studies demonstrated that melanocytes adhered and oriented within the first 2h of culture on HyalS microdomains and not on Hyal microstructures where they spread on glass substrate around the patterned area. Double photo-immobilised samples characterised by a 100 microm stripe pattern of Hyal or HyalS on the top of a continuous layer of the two polysaccharides were also created in order to investigate the effect of the topography on cell behaviour. The obtained results demonstrated that melanocytes adhered on HyalS stripes while on the Hyal micropatterned surfaces they spread on silanised glass substrate around the structured area, resulting in the exclusion of the topographic pattern.
Subject(s)
Cells, Immobilized/ultrastructure , Glass , Hyaluronic Acid/analogs & derivatives , Hyaluronic Acid/chemical synthesis , Melanocytes/drug effects , Melanocytes/physiology , Sulfuric Acid Esters/pharmacology , Animals , Cell Adhesion/drug effects , Cell Culture Techniques/methods , Cell Line , Cells, Immobilized/drug effects , Cells, Immobilized/physiology , Hyaluronic Acid/pharmacology , Melanocytes/ultrastructure , Mice , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Spectrometry, Mass, Secondary Ion , Spectroscopy, Fourier Transform Infrared , Sulfuric Acid Esters/chemical synthesisABSTRACT
The study of cell reaction to micro and nanotopography is dependent on the method of manufacture available. Several methods of manufacture have been developed: polymer demixing, embossing and photolithography. Surfaces obtained with these different techniques, having micro and/or nanodomains, have been studied toward the same type of cells, i.e. human endothelial cells (HGTFN) and mouse fibroblasts (3T3). Polymer demixing of polystyrene (PS) and poly(4-bromostyrene) (PBrS) producing nanometrically islands of 18, 45 and 100 nm height, polycarbonate (PC) and polycaprolactone (PCL) grooved with grooves 450 nm wide and 190 high, the natural polysaccharide hyaluronic acid (Hyal) and its sulfated derivative (HyalS) photoimmobilized on silanized glass as grooves 250 nm high and 100, 50, 25 or 10 microm wide have been obtained. The morphology and polarization of the cells has been studied by optical microscopy and scanning electron microscopy. Cells respond in different way to the topography of the materials, but the surface chemistry is dominant in inducing different cell behavior.
ABSTRACT
Animal cells live in environments where many of the features that surround them are on the nanoscale, for example detail on collagen molecules. Do cells react to objects of this size and if so, what features of the molecules are they responding to? Here we show, by fabricating nanometric features in silica and by casting reverse features in polycaprolactone and culturing vertebrate cells in culture upon them, that cells react in their adhesion to the features. With cliffs, adhesion is enhanced at the cliff edge, while pits or pillars in ordered arrays diminish adhesion. The results implicate ordered topography and possibly symmetry effects in the adhesion of cells. Parallel results were obtained in the adhesion of carboxylate-surfaced 2-microm-diameter particles to these surfaces. These results are in agreement with recent predictions from non-biological nanometric systems.