Osteogenic Differentiation Capacity of Dental Pulp Stem Cells on 3D Printed Polyurethane/Boric Acid Scaffold.

Additive manufacturing is growing in the area of dentistry and orthopedics due to the potential for the fabrication of individual implants. In this study, fused deposition modeling which is the most popular method was used to produce 3D scaffolds having a grid pattern from the polyurethane (PU) filament. Then, this scaffold was coated with boric acid (BA) with the thermionic vacuum arc technique. The microstructure analysis showed the macro-pores having a dimension of ~ 0.16 mm2. The BA coating increased the roughness in adverse decreased the wettability. The presence of BA on the scaffold before and after cell culture was confirmed by FESEM-EDS and ATR-FTIR. The Cell proliferation and osteogenic differentiation capacity of dental pulp stem cells (DPSCs) on uncoated and coated printed 3D PU scaffolds were also investigated. On the third day, cell viability was found to be higher (1.3-fold) in the groups containing BA. However, on the seventh day, the increase in cell proliferation in the PU+BA group was found to be less than in the other groups. According to Ca deposition analysis and Alizarin Red staining, PU+BA increased the calcium accumulation in the cells in both osteogenic induced and non-induced conditions at day 14. According to gene expression analysis, the Runx2 expression was not detected in PU+BA groups with and without differentiation medium (p ≤0.05). The expression of OCN was persistently increased up to 21-fold and 48-fold in cells on PU and PU+BA in osteogenic differentiation medium group after 14 days compared to control group (p ≤0.05). DSPP expression was observed only in PU+BA in osteogenic differentiation medium group. In line with the results that we have obtained, our 3D printed scaffolds have properties to trigger the differentiation of DPSCs cells in terms of osteogenicity.

Anti-adherent activity of nano-coatings deposited by thermionic vacuum arc plasma on C. albicans biofilm formation.

BACKGROUND: The purpose of this study was to analyze the anti-adherent activity of nano-coatings deposited by Thermionic Vacuum Arc plasma on C. albicans ATCC 10231 biofilm. MATERIALS AND METHODS: A total of 80 disc-shaped (2 × 10 mm) polymethymethacrylate samples were prepared and divided into four groups with 10 samples in each group (Control, ZnO, SnO2, Ag) (n = 10). Using thermionic vacuum arc plasma, they were coated with ZnO, SnO2, and Ag. 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and Crystal Viole (CV) assays were conducted for biofilm quantification. Scanning electron microscopy (SEM) was used to observe biofilm images of C. albicans biofilm. RESULTS: MTT and CV mean values differ statistically significantly between all groups (p ⩽ 0.05). The SnO2 group had the lowest mean value, whereas the control group received the highest value. CONCLUSION: SnO2 coating shown greater anti-adherent activity than either metal oxides. C. albicans biofilm formation on denture base surfaces is reduced following Thermionic Vacuum Arc plasma coating with SnO2.

Could Helium Plasma Treatment be a Novel Approach to Prevent the Biofilm Formation of Candida albicans?

There is no definitive method to prevent Candida albicans (C. albicans) biofilm formation on polymethyl methacrylate (PMMA) surfaces. The objective of this study was to evaluate the effect of Helium plasma treatment (before the application of removable dentures to the patient) to prevent or reduce C. albicans ATCC 10,231 the anti-adherent activity, viability, and biofilm formation on PMMA surfaces. One hundred disc-shaped PMMA samples (2 mm × 10 mm) were prepared. The samples were randomly divided into 5 surface groups and treated with different concentrations of Helium plasma: G I: Control group (untreated), G II: 80% Helium plasma-treated group, G III: 85% Helium plasma-treated group, G IV: 90% Helium plasma-treated group, G V: 100% Helium plasma-treated group. C. albicans viability and biofilm formations were evaluated using 2 methods: MTT (3-(4,5-dimethyl thiazolyl-2)-2, 5-diphenyltetrazolium bromide) assays and Crystal Violet (CV) staining. The surface morphology and C. albicans biofilm images were observed with scanning electron microscopy. The Helium plasma-treated PMMA groups (G II, G III, G IV, G V) observed a significant reduction in C. albicans cell viability and biofilm formation compared with the control group. Treating PMMA surfaces with different concentrations of Helium plasma prevents C. albicans viability and biofilm formation. This study suggests that Helium plasma treatment might be an effective strategy in modifying PMMA surfaces to prevent denture stomatitis formation.

Enhancement of Adhesive Bonding Properties of Polyetheretherketone-based Materials using Plasma Surface Modifications.

PURPOSE: To investigate the effects of plasma surface treatments and methyl methacrylate-based adhesives on polyetheretherketone. MATERIALS AND METHODS: One hundred ten polyetheretherketone specimens were fabricated and divided into five pretreatment groups: group ArP, 100% argon plasma; group ArOP, 50% argon + 50% oxygen plasma; group ArNP, 50% argon + 50% nitrogen plasma; group ArONP, 75% argon + 12.5% oxygen + 12.5% nitrogen plasma; group C, control. Atomic force microscopy and scanning electron microscopy were performed after surface treatments. After topographical surface examinations, Visio.link primer (Bredent) (n = 10) was applied to the surface of half of the samples in each group (n = 20) and the veneering resin was polymerized onto the polyetheretherketone. The shear bond strengths were measured using a universal test machine. RESULTS: The mean bond strengths of the Visio.link primer applied to group ArP and group ArONP (13.9 and 13.6 MPa, respectively) were statistically significantly higher than that of group C (9.0 MPa). The average shear bond strength of the Visio.link subgroups was higher than that of the Visio.link subgroups (p > 0.05). CONCLUSIONS: The use of a methyl methacrylate-based adhesive (Visiolink) provides bonding between polyetheretherketone-veneering composites. Different plasma treatments without primer application had no significant effect on bonding.

The influence of voltage applied between the electrodes on optical and morphological properties of the InGaN thin films grown by thermionic vacuum arc.

The aim of this research is to investigate the optical and morphological properties of the InGaN thin films deposited onto amorphous glass substrates in two separate experiments with two different voltages applied between the electrodes, i.e. 500 and 600 V by means of the thermionic vacuum arc technique. This technique is original for thin film deposition and it enables thin film production in a very short period of time. The optical and morphological properties of the films were investigated by using field emission scanning electron microscope, atomic force microscope, spectroscopic ellipsometer, reflectometer, spectrophotometer, and optical tensiometer. Optical properties were also supported by empirical relations. The deposition rates were calculated as 3 and 3.3 nm/sec for 500 and 600 V, respectively. The increase in the voltage also increased the refractive index, grain size, root mean square roughness and surface free energy. According to the results of the wetting experiments, InGaN samples were low-wettable, also known as hydrophobic.

Optical and surface properties of optically transparent Li3 PO4 solid electrolyte layer for transparent solid batteries.

In this study, optical and surface properties of the optically transparent Li3 PO4 solid electrolyte layer for transparent solid battery have been investigated for the first time. To determine the optical properties, transmittance, absorbance, reflection, refractive index spectra, and optical band gap were determined by UV-Vis spectrophotometer and optical interferometer. The surface property of the transparent Li3 PO4 solid electrolyte was analyzed using atomic force microscopy. One another important parameter is contact angle (CA) surface free energy (SFE). CA and SFE were determined by optical tensiometer. These values probably are a most important parameter for polymer and hybrid battery performance. For the best performance, value of CA should be low. As a result, solid electrolyte layer is a highly transparent and it has a high wettability. SCANNING 38:317-321, 2016. © 2015 Wiley Periodicals, Inc.

Optical and surface properties of the in doped GaAs layer deposition using thermionic vacuum arc method.

A broadband optical transparent InGaAs semiconductor layer production of micron thicknesses was produced in only 75 s by thermionic vacuum arc (TVA) method at the first time. The optical and surface properties of the produced layers have been investigated. InGaAs structure is using in electronics and optoelectronics devices. The main advantage of TVA method is its fast deposition rate, without any loss in the quality of the films. Doping is a very simple and fast according to common production methods. InGaAs is an alloy of indium arsenide (InAs) and gallium arsenide (GaAs). InAs with (220) crystallographic direction and GaAs with (024)/(022) crystallographic directions were detected using by XRD analysis. GaAs and InAs are in the cubic and zinc blende crystal system, respectively. According to the transmittance spectra, sample has a broadband transparency in the range of 1000-3300 nm. According to results, defined TVA method for In doping to GaAs is proper fast and friendly method. SCANNING 38:297-302, 2016. © 2015 Wiley Periodicals, Inc.

Nanostructured vanadium carbide thin films produced by RF magnetron sputtering.

In this paper, nanostructured vanadium carbide thin films were deposited on glass substrates and their optical and surface properties were analyzed. All produced samples were transparent in the optical region. Refractive index values were calculated using the Drude model. According to contact angle measurements of the coated surfaces, the samples show high wettability. The surface free energies of the samples were found to be very similar. The influence of the nitrogen content in the buffer gas mixture was determined; it was concluded that the microstructure, refractive index, surface morphology, surface free energy, and thickness of thin films can change in response to the nitrogen concentration of the radio frequency (RF) buffer gas.