Pilot Collection and Evaluation of Head Kinematics in Stock Car Racing.

The goal of this work was to collect on-track driver head kinematics using instrumented mouthpieces and characterize environmental exposure to accelerations and vibrations. Six NASCAR drivers were instrumented with custom-fit mouthpieces to collect head kinematic data. Devices were deployed at four tracks during practice and testing environments and configured to collect approximately 11 min of linear acceleration and rotational velocity data at 200 Hz. This continuous data collection, combined with film review, allowed extraction of complete laps of data. In addition to typical data processing methods, a moving-point average was calculated and subtracted from the overall signal for both linear acceleration and rotational velocity to determine the environmental component of head motion. The current analysis focuses on 42 full laps of data collected at four data collection events. The number of laps per track ranged from 2 to 23. Linear acceleration magnitudes for all 42 laps ranged from 2.46 to 7.48 g and rotational velocity ranged from 1.25 to 3.35 rad/s. After subtracting the moving average, linear acceleration ranged from 0.92 to 5.45 g and rotational velocity ranged from 0.57 to 2.05 rad/s. This study has established the feasibility of using an instrumented mouthpiece to measure head kinematics in NASCAR and presented a technique for isolating head motion due to cornering acceleration from those due to short-term perturbations experienced by the driver.

Effect of body size and enhanced helmet systems on risk for motorsport drivers.

OBJECTIVE: Computational modeling has been shown to be a useful tool for simulating representative motorsport impacts and analyzing data for relative injury risk assessment. Previous studies have used computational modeling to analyze the probability of injury in specific regions of a 50th percentile male driver. However, NASCAR drivers can represent a large range in terms of size and female drivers are becoming increasingly more common in the sport. Additionally, motorsport helmets can be outfitted with external attachments, or enhanced helmet systems (EHS), whose effect is unknown relative to head and neck kinematics. The current study expands on this previous work by incorporating the F05-OS and M95-OS into the motorsport environment in order to determine correlations between metrics and factors such as PDOF, resultant ΔV occupant size, and EHS. METHODS: A multi-step computational process was used to integrate the Global Human Body Models Consortium family of simplified occupant models into a motorsport environment. This family included the 5th percentile female (F05-OS), 50th percentile male (M50-OS), and 95th percentile male (M95-OS), which provide a representative range for the size and sex of drivers seen in NASCAR's racing series'. A series of 45 representative impacts, developed from real-world crash data, and set of observed on-track severe impacts were conducted with these models. These impacts were run in triplicate for three helmet configurations: bare helmet, helmet with visor, helmet with visor and camera. This resulted in 450 total simulations. A paired t-test was initially performed as an exploratory analysis to study the effect of helmet configuration on 10 head and neck injury metrics. A mixed-effects model with unstructured covariance matrix was then utilized to correlate the effect between five independent variables (resultant ΔV, body size, helmet configuration, impact quadrant, and steering wheel position) and a selection of 25 metrics. All simulations were conducted in LS-Dyna R. 9.1. RESULTS: Risk estimates from the M50-OS with bare helmet were used as reference values to determine the effect of body size and helmet configuration. The paired t-test found significance for helmet configuration in select head-neck metrics, but the relative increase in these metrics was low and not likely to increase injury risk. The mixed-effects model analyzed statistical relationships across multiple types of variables. Within the mixed-effects model, no significance was found between helmet configuration and metrics. The greatest effect was found from resultant ΔV, body size, and impact quadrant. CONCLUSIONS: Overall, smaller drivers showed statistically significant reductions in injury metrics, while larger drivers showed statistically significant increases. Lateral impacts showed the greatest effect on neck metrics and, on average, showed decreases for head metrics related to linear acceleration and increases for head metrics related to angular velocity. HBM parametric studies such as this may provide an avenue to assist injury detection for motorsport incidents, improve triage effectiveness, and assist in the development of safety standards.

Simulation-based assessment of injury risk for an average male motorsport driver.

OBJECTIVE: While well-protected through a variety of safety countermeasures, motorsports drivers can be exposed to a large variety of crash modes and severities. Computational human body models (HBMs) are currently used to assess occupant safety for the general driving public in production vehicles. The purpose of this study was to incorporate a HBM into a motorsport environment using a simulation-based approach and provide quantitative data on relative risk for on-track motorsport crashes. METHODS: Unlike a traditional automotive seat, the NASCAR driver environment is driver-customized and form-fitting. A multi-step process was developed to integrate the Global Human Body Models Consortium (GHBMC) 50th percentile male simplified occupant into a representative motorsport environment which includes a donned helmet, a 7-point safety belt system, head and neck restraint (HNR), poured-foam seat, steering wheel, and leg enclosure. A series of 45 representative impacts, developed from real-world crash data, of varying severity (10 kph ≤ ΔV ≤ 100 kph) and impact direction (∼290° ≤ PDOF ≤ 20°) were conducted with the GHBMC 50th percentile male simplified occupant (M50-OS v2.2). Kinematic and kinetic data, and a variety of injury criteria, were output from each of the simulations and used to calculate AIS 1+, 2+, and 3+ injury risk. All simulations were conducted in LS-Dyna R. 9.1. RESULTS: Injury risk of the occupant using the previously mentioned injury criteria was calculated for the head, neck, thorax, and lower extremity, and the probability of injury for each region was plotted. Of the simulated impacts, five had a maximum AIS 1+ injury risk >20%, six had a maximum AIS 2+ injury risk >10%, and no cases had a maximum AIS 3+ injury >1%. Overall, injury risk estimates were reasonable compared to on-track data reported from Patalak et al. (2020). CONCLUSIONS: Beyond injury risk, the study is the first of its kind to provide mechanical loading values likely experienced during motorsports crash incidents with crash pulses developed from real-world data. Given the severity of the crash pulses, the simulated environments reinforce the need for the robust safety environment implemented by NASCAR.

Estimated crash injury risk and crash characteristics for motorsport drivers.

OBJECTIVE: Motorsport crash events are complex and driver restraint systems are unique to the motorsport environment. The National Association for Stock Car Auto Racing, Incorporated (NASCAR®) crash and medical datasets provide an opportunity to assess crash statistics and the relationship between crash characteristics and driver injury. Injury risk curves can estimate driver injury risk and can be developed using vehicle incident data recorder information as inputs. These relationships may provide guidance and insight for at-track emergency response, driver triage and treatment protocols. METHOD: Eight race seasons of crash and medical record data (including Association for the Advancement of Automotive Medicine Abbreviated Injury Scale (AIS) scores) from the Monster Energy NASCAR Cup Series & NASCAR Xfinity Series were processed and analyzed. Multiple logistic regression modeling was used to produce injury risk curves from longitudinal and lateral resultant change in velocity, resultant peak acceleration, principal direction of force and the number of impacts per incident. RESULTS: 2065 Unique IDR data files were matched with 246 cases of driver injury or sub-injury (severity below AIS 1) and 1819 no-injury cases. Multiple logistic regression modeling showed increasing resultant change in velocity, resultant peak acceleration and the number of impacts during a crash event all increase estimated driver injury risk. After accounting for the other predictors in the model, right lateral impacts were found to have a lower estimated injury risk. The model produced an Area Under the Receiver Operating Characteristics curve of 0.80. Across the eight race seasons in this study the overall average resultant change in velocity was 34.4 kph (21.4 mph) and the average resultant peak acceleration was 19.0 G for an average of 258 crashes per season. For 2011 through 2015, full time drivers experienced 134 times more crashes per mile traveled than passenger vehicles, but experienced 9.3 times fewer injuries per crash. CONCLUSION: Multiple logistic regression was used to estimate AIS 1+ injury only and AIS 1+ with sub-injury risk for motorsport drivers using motorsport-specific crash and medical record databases. The injury risk estimate models can provide future guidance and insight for at-track emergency medical response dispatch immediately following an on-track crash. These models may also inform future driver triage protocols and influence future expenditures on motorsports safety research.

Implications of head and neck restraint test repeatability for specification improvement.

Objective: Since 2005, National Association for Stock Car Auto Racing, Incorporated (NASCAR) drivers have been required to use a head and neck restraint system (HNR) that complies with SFI Foundation, Inc. (SFI) 38.1. The primary purpose of the HNR is to control and limit injurious neck loads and head kinematics during frontal and frontal oblique impacts. The SFI 38.1 performance specification was implemented to establish a uniform test procedure and minimum standard for the evaluation of HNRs using dynamic sled testing. The purpose of this study was to evaluate the repeatability of the current SFI 38.1 test setup and explore the effects of a polyester seat belt restraint system. Method: Eight sled tests were conducted using the SFI 38.1 sled test protocol with additional test setup constraints. Four 0° frontal tests and 4 30° right frontal (RF) oblique tests were conducted. The first 3 tests of each principal direction of force (PDOF) used nylon SFI 16.1 seat belt restraint assemblies. The fourth test of each PDOF used polyester SFI 16.6 seat belt restraint assemblies. A secondary data set (Lab B Data) was also supplied by the HNR manufacturer for further comparisons. The International Organization for Standardization (ISO) 18571 objective comparison method was used to quantify the repeatability of the anthropomorphic test device (ATD) resultant head, chest, and pelvis acceleration and upper neck axial force and flexion extension bending moment time histories across multiple tests. Results: Two data sets generated using the SFI 38.1 test protocol exhibited large variations in mean ISO scores of ATD channels. The 8 tests conducted with additional setup constraints had significantly lower mean ISO score coefficients of variation (CVs). The Lab B tests conducted within the current specification but without the additional test setup constraints had larger mean ISO score standard deviation and CV for all comparisons. Specifically, tests with the additional setup constraints had average CVs of 3.3 and 2.9% for the 0° and 30° RF orientations, respectively. Lab B tests had average CVs of 22.9 and 24.5%, respectively. Polyester seat belt comparisons had CVs of 5.3 and 6.2% for the 0° and 30° RF orientations, respectively. Conclusion: With the addition of common test setup constraints, which do not violate the specification, the SFI 38.1 test protocol produced a repeatable test process for determining performance capabilities of HNRs within a single sled lab. A limited study using polyester webbing seat belt assemblies versus the nylon material called for in SFI 38.1 indicates that the material likely has less effects on ATD upper neck axial force and flexion extension bending moment time histories than the test setup freedom currently available within the specification. The additional test setup constraints are discussed and were shown to improve ATD response repeatability for a given HNR.

Evaluation of the effectiveness of toe board energy-absorbing material for foot, ankle, and lower leg injury reduction.

OBJECTIVE: Since 2000, numerous improvements have been made to the National Association for Stock Car Auto Racing, Incorporated (NASCAR®) driver restraint system, resulting in improved crash protection for motorsports drivers. Advancements have included seats, head and neck restraints (HNRs), seat belt restraint systems, driver helmets, and others. These enhancements have increased protection for drivers from severe crash loading. Extending protection to the driver's extremities remains challenging. Though the drivers' legs are well contained for lateral and vertical crashes, they remain largely unrestrained in frontal and frontal oblique crashes. METHOD: Sled testing was conducted for the evaluation of an energy-absorbing (EA) toe board material to be used as a countermeasure for leg and foot injuries. Testing included baseline rigid toe boards, tests with EA material-covered toe boards, and pretest positioning of the 50th percentile male frontal Hybrid III anthropomorphic test device (ATD) lower extremities. ATD leg and foot instrumentation included foot acceleration and tibia forces and moments. RESULTS: The sled test data were evaluated using established injury criteria for tibial plateau fractures, leg shaft fractures, and calcaneus, talus, ankle, and midfoot fractures. CONCLUSION: A polyurethane EA foam was found to be effective in limiting axial tibia force and foot accelerations when subjected to frontal impacts using the NASCAR motorsport restraint system.