Radiofrequency driving antitumor effect of graphene oxide-based nanocomposites: a Hill model analysis.

Aim: This report proposes using the Hill model to assess the benchmark dose, the 50% lethal dose, the cooperativity and the dissociation constant while analyzing cell viability data using nanomaterials to evaluate the antitumor potential while combined with radiofrequency therapy. Materials & methods: A nanocomposite was synthesized (graphene oxide-polyethyleneimine-gold) and the viability was evaluated using two tumor cell lines, namely LLC-WRC-256 and B16-F10. Results: Our findings demonstrated that while the nanocomposite is biocompatible against the LLC-WRC-256 and B16-F10 cancer cell lines in the absence of radiofrequency, the application of radiofrequency enhances the cell toxicity by orders of magnitude. Conclusion: This result points to prospective studies with the tested cell lines using tumor animal models.

Colloidal copper oxide nanoparticles leading to a biphasic dose-response in growth inhibition of Staphylococcus aureus.

Aim: The dose response in growth inhibition of Staphylococcus aureus treated with colloidal copper oxide nanoparticles (CuO-NP) was evaluated. Methods: An in vitro microbial viability assay was conducted with CuO-NP concentrations spreading over the 0.4-848.0 µg/ml range. The dose-response curve was modeled with a double Hill equation. UV-Visible absorption and photoluminescence spectroscopies allowed tracking concentration-dependent modifications in CuO-NP. Results: Two specific phases separated by the critical concentration of 26.5 µg/ml were observed in the dose-response curve, with each exhibiting proper IC50 parameters, Hill coefficients and relative amplitudes. Spectroscopy techniques reveal the occurrence of a concentration-triggered aggregation of CuO-NP starting from this critical concentration. Conclusion: The findings demonstrate a dose-related change in S. aureus sensitivity to CuO-NP, which probably arises from the aggregation of this agent.

Antibacterial agents are often used to stop the growth of bacteria such as Staphylococcus aureus (S. aureus). Copper oxide nanoparticles (CuO-NP) stand as a promising candidate for this purpose. Generally, the agent´s effectiveness is inspected following a dose-response curve in which de agent´s antibacterial response is plotted against its dose (concentration). In this work, employing an extended mathematical interpretation we were capable of discerning experimentally the existence of two stages of dose-response (biphasic dose-response) in the treatment of S. aureus with CuO-NP. These results in combination with insights from spectroscopic techniques lead to the understanding that the biphasic behavior arises from the aggregation of CuO-NP at high concentrations. Therefore, according to the adopted concentration to treat S. aureus, the agent can behave as a dispersed nanoparticle or as an aggregated nanoparticle. In summary, understanding whether antibacterial agents transform as a function of concentration is important in determining their practical applications.

UV-Accelerated Synthesis of Gold Nanoparticle-Pluronic Nanocomposites for X-ray Computed Tomography Contrast Enhancement.

Eco-friendly chemical methods using FDA-approved Pluronic F127 (PLU) block copolymer have garnered much attention for simultaneously forming and stabilizing Au nanoparticles (AuNPs). Given the remarkable properties of AuNPs for usage in various fields, especially in biomedicine, we performed a systematic study to synthesize AuNP-PLU nanocomposites under optimized conditions using UV irradiation for accelerating the reaction. The use of UV irradiation at 254 nm resulted in several advantages over the control method conducted under ambient light (control). The AuNP-PLU-UV nanocomposite was produced six times faster, lasting 10 min, and exhibited lower size dispersion than the control. A set of experimental techniques was applied to determine the structure and morphology of the produced nanocomposites as affected by the UV irradiation. The MTT assay was conducted to estimate IC50 values of AuNP-PLU-UV in NIH 3T3 mouse embryonic fibroblasts, and the results suggest that the sample is more compatible with cells than control samples. Afterward, in vivo maternal and fetal toxicity assays were performed in rats to evaluate the effect of AuNP-PLU-UV formulation during pregnancy. Under the tested conditions, the treatment was found to be safe for the mother and fetus. As a proof of concept or application, the synthesized Au:PLU were tested as contrast agents with an X-ray computed tomography scan (X-ray CT).

Multilayered iron oxide/reduced graphene oxide nanocomposite electrode for voltammetric sensing of bisphenol-A in lake water and thermal paper samples.

A multilayered iron oxide/reduced graphene oxide (ION-RGO) nanocomposite electrode is reported for the voltammetric sensing of bisphenol-A (BPA). Structural characterizations reveal the nanocomposite features RGO sheets decorated with nanometric spherical ION in a mixture of maghemite and magnetite phases. ITO substrate modified with the ION-RGO multilayered film exhibits strong electrocatalytic effect toward BPA oxidation, which is made possible by Fe(III) catalysts generated at the ION's surface after scanning the electrode potential from below 0 V (vs Ag/AgCl) and followed by the RGO phase conducting the transferred electrons. Under optimized differential pulse voltammetry conditions, the proposed sensor shows three linear working ranges 0.09-1.17 (r2 = 0.999), 1.17-3.81 (r2 = 0.995) and 3.81-8.20 (r2 = 0.998), with the highest sensitivity equaling 7.76 µA cm-2/µmol L-1 and the lowest limit of detection of 15 nmol L-1. A single electrode can be used for at least twenty consecutive runs loosing less than 15% of sensitivity, whereas electrodes fabricated in different bacthes exhibit almost identical perfomances. Determination of BPA in a thermal paper sample shows no difference (at 95% confidence level) between the proposed sensor and HPLC/UV. The sensor is neither influenced by the matrix composition nor by other emerging contaminants.

Starch-Mediated Immobilization, Photochemical Reduction, and Gas Sensitivity of Graphene Oxide Films.

This work unveils the roles played by potato starch (ST) in the immobilization, photochemical reduction, and gas sensitivity of graphene oxide (GO) films. The ST/GO films are assembled layer by layer (LbL) onto quartz substrates by establishing mutual hydrogen bonds that drive a stepwise film growth, with equal amounts of materials being adsorbed in each deposition cycle. Afterward, the films are photochemically reduced with UV irradiation (254 nm), following a first-order kinetics that proceeds much faster when GO is assembled along with ST instead of a nonoxygenated polyelectrolyte, namely, poly(diallyl dimethylammonium) hydrochloride (PDAC). Finally, the gas-sensing performance of ST/reduced graphene oxide (RGO) and PDAC/RGO sensors fabricated via LbL atop of gold interdigitated microelectrodes is evaluated at different relative humidity levels and in different concentrations of ammonia, ethanol, and acetone. In comparison to the PDAC/RGO sensor, the ones containing ST are much more sensitive, especially when operating in a high-relative-humidity environment. An array comprising these chemical sensors provides unique electrical fingerprints for each of the investigated analytes and is capable of discriminating and quantifying them in a wide range of concentrations, from 10 to 1000 ppm.

Magnetic studies of layer-by-layer assembled polyvinyl alcohol/iron oxide nanofilms.

This study reports on investigation of the magnetic properties of layer-by-layer (LbL) assembled nanofilms comprising polyvinyl alcohol (PVA) and citrate-coated magnetite (cit-MAG) nanoparticles deposited onto silicon (SF sample) and glass (GF sample) substrates. DC magnetization measurements were performed over the temperature range of 4 K to 300 K, in the applied magnetic field range of ±60 kOe. The magnetic data of the as-synthesized cit-MAG nanoparticles (F sample) are also collected for comparison. The three as-fabricated samples reveal perfect superparamagnetic (SPM) behavior only around room temperature; at temperatures lower than 200 K the SPM scaling is not observed and all samples behave as interacting superparamagnetic (ISPM) materials. The evolution from the ISPM to the SPM regime is marked by a steady decrease in the hysteretic properties of all samples, with the temperature-dependence of the coercivity decreasing slower than the T1/2 behavior predicted for non-interacting superparamagnetic particles. The modified Bloch's law used to assess information on nanoparticles' surface spins gives the Bloch's exponent close to 2 (for the F and SF samples) and close to 1 (for the GF sample). Interestingly, the surface spin freezing temperature (Tf) is 8 ± 1 K for all samples. The magnetic behavior of all three samples can be described within the model picture of a core-shell structure for the cit-MAG nanoparticles; the core comprising magnetically-ordered spins whereas the shell behaving as a spin-glass-like system. However, the contribution of the shell magnetism to the effective magnetic properties is much more evident in the GF sample in which magnetic dipole-dipole interaction is three-times weaker than in the SF sample and two times weaker than in the F sample. In contrast, the strong magnetic dipole-dipole interaction in the SF sample affects the surface spins, hindering the onset of magnetically-ordered regions in the nanoparticle's shell, making the surface magnetism contribution negligible. The LbL-fabricated nanofilms herein reported and the presented analysis of their magnetic properties we envisage can support the engineering of magnetic nanofilms for multiple applications.

Quenching Effects of Graphene Oxides on the Fluorescence Emission and Reactive Oxygen Species Generation of Chloroaluminum Phthalocyanine.

The photophysical behavior and reactive oxygen species (ROS) generation by chloroaluminum phthalocyanine (AlClPc) are evaluated by steady state absorption/emission, transient emission, and electron paramagnetic resonance spectroscopies in the presence of graphene oxide (GO), reduced graphene oxide (RGO), and carboxylated nanographene oxide (NGO). AlClPc and graphene oxides form a supramolecular structure stabilized by π-π interactions, which quantitatively quenches fluorescence emission and suppresses ROS generation. These effects occur even when graphenes are previously functionalized with Pluronic F-127. A small part of quenching is due to an inner filter effect, in which graphene oxides compete with AlClPc for light absorption. Nonetheless, most of the (static) quenching arises on the formation of a nonemissive ground state complex between AlClPc and graphene oxides. The efficiency of graphene oxides on the fluorescence quenching and ROS generation suppression follows the order: GO < NGO < RGO.

Rovibrational spectroscopic constants of the interaction between ammonia and metallo-phthalocyanines: a theoretical protocol for ammonia sensor design.

In the present contribution, we develop an adapted theoretical approach based on DFT calculations (B3LYP functional) and solution of the nuclear Schrödinger equation by using the Discrete Variable Representation method to model the interaction of ammonia with metallo-phthalocyanines (MPcs, where M = Fe2+, Co2+, Ni2+, Cu2+ or Zn2+). This approach is intended to be a general protocol for the rational design of chemical sensors. The as-obtained binding energy curves, obtained from ab initio points, permitted us to calculate rovibrational energies and spectroscopic constants, as well as to establish the relative population of rovibrational states in different types of MPc-NH3 thermodynamic systems. Simulated binding energy curves show that the binding energy in MPc-NH3 systems is dependent on the type of M central ion, decreasing in the order FePc > ZnPc > CoPc > CuPc > NiPc, with values spanning from -170 to -16 kJ mol-1. Also, MPc-NH3 systems have at least 16 rovibrational levels, which confirms that they are all bound systems (chemically or physically). Despite that, only the interaction between ammonia and FePc, CoPc or ZnPc is spontaneous within the studied temperature range (200-700 K). NiPc and CuPc show a change between spontaneous and non-spontaneous behaviours at ∼400 K and ∼500 K, respectively. Less bound systems should more efficiently guarantee the sensors' signal reset, while they are also less specific than sensors built with medium to strongly bound systems. Moreover, the intermediate energy and spontaneous binding of ammonia to NiPc and CuPc at operation temperatures, as determined with our theoretical approach, suggests that these MPcs are most promising for ammonia sensors.

Photochemically-assisted synthesis of non-toxic and biocompatible gold nanoparticles.

This contribution describes the photochemically-assisted synthesis of aqueous colloidal suspensions of non-toxic and biocompatible spherical gold nanoparticles stabilized by branched polyethylenimine, or else Au-np-PEI. The method consists on 30min of photoexcitation (254nm, 16W) at room temperature of an aqueous diluted solution of chloroauric acid (HAuCl4) containing PEI. While the UV irradiation forms the [Au(3+)Cl4-]* excited species that succesively transforms into zero valent Au, PEI controls the nucleation step of nanoparticles formation. Varying the PEI to Au molar ratio permits one to tune the size of nanoparticles between 100nm to 8nm. The obtained colloidal suspensions display an intense plasmonic absorption band at 520-530nm and positive zeta potentials greater than +20mV. The cells viability for in vitro tests performed with human connective tissues and human breast adenocarcinoma (MCF-7) cell lines is over 80% and 90%, respectively, when they are incubated with Au-np-PEI formulations (25µgmL-1). The present photochemically-assisted synthesis is advantageous because it is fast and does not require for either hazardous or cytotoxic reductant agents and additional purification procedures.

Highly efficient photodynamic therapy colloidal system based on chloroaluminum phthalocyanine/pluronic micelles.

Phthalocyanine derivatives comprise the second generation of photosensitizer molecules employed in photodynamic therapy (PDT) and have attracted much attention due to their outstanding photosensitizing performance. Most phthalocyanines are hydrophobic compounds that require association to drug delivery systems for clinical use. In this study, formulations of Pluronic F127 micelles incorporated with chloroaluminum phthalocyanine, or else F127/AlClPc, were produced at optimized conditions aiming at efficient and biocompatible PDT colloidal systems. Absorption/emission spectroscopies, as well as dynamic light scattering were performed to evaluate the optimum conditions for the F127 micelle formation and AlClPc incorporation. The micelles formation was attained with F127 concentrations ranging from 50 to 150mgmL(-1). At these conditions, AlClPc photosensitizer molecules were encapsulated into the hydrophobic micelle core and, therefore, readily solubilized in physiological medium (PBS pH 7.2). Encapsulation efficiency of about 90% resulted from different AlClPc concentrations. Identification of singlet oxygen production by irradiated F127/AlClPc formulations indicated good applicability for PDT. In vitro tests conducted with A549 human lung carcinoma cell line incubated with the F127/AlClPc formulations, at different AlClPc loadings, followed by only 18min of light irradiation (660nm LED, fluence of 25.3J/cm(2)), showed a cellular damage as high as 90% for rather low dosages of AlClPc (0.1-5.0µgmL(-1)). Further, no cytotoxicity occurred on non-irradiated cells. These findings suggest those F127/AlClPc formulations are highly promising for PDT applications, since they are easily prepared and the incubation and irradiation times are significantly shortened.

Thermal and electrical properties of starch-graphene oxide nanocomposites improved by photochemical treatment.

Bionanocomposite films have been prepared by casting an aqueous suspension of acetylated starch (ST) and poly(vinyl alcohol) (PVA) loaded with graphene oxide (GO). A photochemical and reagentless method has been successfully performed to convert the GO phase into reduced graphene oxide (RGO). The nanocomposites have displayed improved thermal and electrical properties when the amount of the GO phase is increased and properly converted to RGO. The molecular-level interactions between components are mainly hydrogen-bonding type according to attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and Raman spectroscopies, as well as thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) has confirmed the effective mixing between the GO and the ST-PVA matrix. The thermal diffusivity and electrical resistivity of ST-GO nanocomposites have increased one order and decreased two orders of magnitude, respectively, after the photochemical treatment. These findings have confirmed the effectiveness of the proposed approach to produce starch-based nanocomposites with improved thermal and electrical properties.

Dielectric properties of cobalt ferrite nanoparticles in ultrathin nanocomposite films.

Multilayered nanocomposite films (thickness 50-90 nm) of cobalt ferrite nanoparticles (np-CoFe2O4, 18 nm) were deposited on top of interdigitated microelectrodes by the layer-by-layer technique in order to study their dielectric properties. For that purpose, two different types of nanocomposite films were prepared by assembling np-CoFe2O4 either with poly(3,4-ethylenedioxy thiophene):poly(styrene sulfonic acid) or with polyaniline and sulfonated lignin. Despite the different film architectures, the morphology of both was dominated by densely-packed layers of nanoparticles surrounded by polyelectrolytes. The dominant effect of np-CoFe2O4 was also observed after impedance spectroscopy measurements, which revealed that dielectric behavior of the nanocomposites was largely influenced by the charge transport across nanoparticle-polyelectrolyte interfaces. For example, nanocomposites containing np-CoFe2O4 exhibited a single low-frequency relaxation process, with time constants exceeding 15 ms. At 1 kHz, the dielectric constant and the dissipation factor (tan δ) of these nanocomposites were 15 and 0.15, respectively. These values are substantially inferior to those reported for pressed pellets made exclusively of similar nanoparticles. Impedance data were further fitted with equivalent circuit models from which individual contributions of particle's bulk and interfaces to the charge transport within the nanocomposites could be evaluated. The present study evidences that such nanocomposites display a dielectric behavior dissimilar from that exhibited by their individual counterparts much likely due to enlarged nanoparticle-polyelectrolyte interfaces.

Tuning of magnetic dipolar interactions of maghemite nanoparticles embedded in polyelectrolyte layer-by-layer films.

In this study we report an experimental approach capable of tuning dipolar interactions in hybrid magnetic nanofilms produced via layer-by-layer assembly of positively-charged maghemite nanoparticles and sodium sulfonated polystyrene onto glass and silicon substrates. Morphological and magnetic properties of the as prepared nanofilms were determined by Raman spectroscopy, atomic force microscopy, conventional and SQUID magnetometry. Maghemite nanoparticles form densely packed layers with voids between particles being filled by polymeric material as observed in atomic force microscopy images. Magnetic hysteresis loops and zero-field-cooled/field-cooled magnetization curves reveal a superparamagnetic behavior at room temperature. The energy barrier for the magnetic moment reversal of the nanofilms has been determined from the frequency dependent ac susceptibility and is related to the gamma-Fe2O3 nanoparticles concentration used in the colloidal dispersion throughout film fabrication. Variations on the interparticle distances have a direct effect on the interparticle dipolar interactions. A less concentrated colloid gives rise to large separated nanoparticles inside the nanofilm with a consequent reduction on the energy barrier for the magnetic moment reversal. The fabrication process exploring the control of the nanoparticle concentration can thus be used to tune the magnetic dipolar interactions in the nanofilms.

Adsorption of cobalt ferrite nanoparticles within layer-by-layer films: a kinetic study carried out using quartz crystal microbalance.

The paper reports on the successful use of the quartz crystal microbalance technique to assess accurate kinetics and equilibrium parameters regarding the investigation of in situ adsorption of nanosized cobalt ferrite particles (CoFe(2)O(4)--10.5 nm-diameter) onto two different surfaces. Firstly, a single layer of nanoparticles was deposited onto the surface provided by the gold-coated quartz resonator functionalized with sodium 3-mercapto propanesulfonate (3-MPS). Secondly, the layer-by-layer (LbL) technique was used to build multilayers in which the CoFe(2)O(4) nanoparticle-based layer alternates with the sodium sulfonated polystyrene (PSS) layer. The adsorption experiments were conducted by modulating the number of adsorbed CoFe(2)O(4)/PSS bilayers (n) and/or by changing the CoFe(2)O(4) nanoparticle concentration while suspended as a stable colloidal dispersion. Adsorption of CoFe(2)O(4) nanoparticles onto the 3-MPS-functionalized surface follows perfectly a first order kinetic process in a wide range (two orders of magnitude) of nanoparticle concentrations. These data were used to assess the equilibrium constant and the adsorption free energy. Alternatively, the Langmuir adsorption constant was obtained while analyzing the isotherm data at the equilibrium. Adsorption of CoFe(2)O(4) nanoparticles while growing multilayers of CoFe(2)O(4)/PSS was conducted using colloidal suspensions with CoFe(2)O(4) concentration in the range of 10(-8) to 10(-6) (moles of cobalt ferrite per litre) and for different numbers of cycles n = 1, 3, 5, and 10. We found the adsorption of CoFe(2)O(4) nanoparticles within the CoFe(2)O(4)/PSS bilayers perfectly following a first order kinetic process, with the characteristic rate constant growing with the increase of CoFe(2)O(4) nanoparticle concentration and decreasing with the rise of the number of LbL cycles (n). Additionally, atomic force microscopy was employed for assessing the LbL film roughness and thickness. We found the film thickness increasing from about 20 to 120 nm while shifting from 3 to 10 CoFe(2)O(4)/PSS bilayers, using the 8.9 × 10(-6) (moles of cobalt ferrite per litre) suspension.

Magnetic nanocomposites fabricated via the layer-by-layer approach.

In this study we describe the fabrication and characterization of nanocomposites consisting of layer-by-layer assembled polyaniline, sulfonated polystyrene, and maghemite nanoparticle layers. In order to assemble the starting components via electrostatic interaction, stable magnetic fluid containing maghemite nanoparticles (d approximately = 7 nm) with either positive or negative surface charges was used as source of nanoparticles for the layer-by-layer assembly. The structure, morphology, electrical and magnetic properties of such nanocomposite films were investigated by UV-Vis spectroscopy, atomic force microscopy, electrical, and magnetic measurements. The amount of PANI, PSS and maghemite nanoparticles within the nanocomposite films increased almost linearly with the number of deposited layers. Atomic force microscopy image of typical polyaniline/maghemite nanocomposites reveal nanoparticles adsorbed all over the film surface. The as-produced nanocomposite exhibits electrical conductivity and superparamagnetism behavior at room temperature, the latter confirmed by the absence of magnetic hysteresis.

Nanoscale conformational ordering in polyanilines investigated by SAXS and AFM.

Understanding the adsorption mechanisms in nanostructured polymer films has become crucial for their use in technological applications, since film properties vary considerably with the experimental conditions utilized for film fabrication. In this paper, we employ small-angle X-ray scattering (SAXS) to investigate solutions of polyanilines and correlate the chain conformations with morphological features of the nanostructured films obtained with atomic force microscopy (AFM). It is shown that aggregates formed already in solution affect the film morphology; in particular, at early stages of adsorption film morphology appears entirely governed by the chain conformation in solution and adsorption of aggregates. We also use SAXS data for modeling poly(o-ethoxyaniline) (POEA) particle shape through an ab initio procedure based on simulated annealing using the dummy atom model (DAM), which is then compared to the morphological features of POEA films fabricated with distinct pHs and doping acids. Interestingly, when the derivative POEA is doped with p-toluene sulfonic acid (TSA), the resulting films exhibit a fibrillar morphology-seen with atomic force microscopy and transmission electron microscopy-that is consistent with the cylindrical shape inferred from the SAXS data. This is in contrast with the globular morphology observed for POEA films doped with other acids.