Synthesis and characterization of chitosan-zinc-salicylic acid nanoparticles: A plant biostimulant.

The vastly expanding global population raised the demand for profuse food grain production. For food security in India, high yield and nutritional quality of grain crops, both are essential. Zinc is a crucial micronutrient generally deficient in food grains grown in India, reflecting their deteriorating nutritional quality. To address these issues, in the present study, a novel tri-component nanoparticle of chitosan­zinc-salicylic acid (CS-Zn-SA NPs) has been synthesized by ionotropic gelation method. The average size of synthesized CS-Zn-SA NPs was recorded 13.5 nm by dynamic light scattering (DLS) spectroscopy. The presence of chitosan, zinc and salicylic acid and crosslinking among these components in synthesized nanoparticles has been demonstrated by Fourier transforms infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA). Further, synthesized CS-Zn-SA NPs at various concentrations (50-200 ppm) were evaluated for seed germination via seed priming, yield, grain zinc content and defence enzyme activity through the foliar application. CS-Zn-SA NPs revealed significant seed germination activities, 19.8 % higher grain yield, 45.5 % increased grain zinc content and manyfold defence enzyme activities than the control. The obtained results exposed the potential of CS-Zn-SA NPs as a stimulant for effective seedling development, higher yield, a virtuous micronutrient fortifying agent and defence enzyme promoter.

Improved deinking and biobleaching efficiency of enzyme consortium from Thermomyces lanuginosus VAPS25 using genetic Algorithm-Artificial neural network based tools.

The present study reports the combined enzymatic production efficiency of thermophilic fungus Thermomyces lanuginosus VAPS25 using a combinatory artificial intelligence-based tool, resulting in 2.7 IU/ml, 5.2 IU/ml, and 18.85 U/ml activity of endoglucanase, amylase, and lipase, respectively with good thermostability at 90 °C (pH 8-10). Interestingly, the metal ions viz. Cu2+ and Mg2+ increased the endoglucanase activity to 5 folds, i.e.,5.6 IU/ml compared to control. Further, the amylase and lipase activity was also enhanced by Fe2+ and Co2+ to 5.4 IU/ml and 19.57 U/ml, respectively. Additionally, the deinking efficiency was improved by 68.9%, 42.7%, and 52.8% by endoglucanase, amylase, and lipase, respectively, while the consortium increased the deinking efficiency to 72.7%. The bio-bleached paper strength parameters such as burst index, breaking length, tear index, and tensile index of sheets were significantly improved by 1.38%, 13.54%, 7.54%, and 20.88%, respectively. These enzymes at an industrial scale would help develop an economical paper recycling process.

Partial purification of bacterial cellulo-xylanolytic enzymes and their application in deinking of photocopier waste paper.

The potential of alkaline cellulo-xylanolytic enzymes from non-pathogenic Bacillus subtilis strain was tested for deinking of photocopier waste paper. Cellulase and xylanase play a crucial role in deinking of different types of waste paper. Partial purification of cellulo-xylanolytic enzymes was carried out using ultrafiltration followed by ammonium sulfate precipitation. The ultrafiltered enzyme was used for deinking the photocopier waste paper along with chemical deinking. An enzyme dose of 0.6 IU/g and reaction time of 60 min for ultrafiltered cellulo-xylanolytic enzyme significantly increased deinking efficiency, tear index (9.52%) and folding endurance (5±2%) as compared to chemical deinking. There was improvement in strength properties such as tear index and double-fold along with freeness of pulp (18%). There was slight decrease in tensile index (0.6%) and burst index (16%) while ISO brightness remained unaffected. Enzymatic deinking (74.3%) by ultrafiltered cellulo-xylanolytic from Bacillus subtilis was found significant over conventional chemical deinking.

Two-Step Saccharification of the Xylan Portion of Sugarcane Waste by Recombinant Xylanolytic Enzymes for Enhanced Xylose Production.

Sugarcane bagasse (SB) and sugarcane trash (SCT) containing 30% hemicellulose content are the waste from the sugarcane industry. Hemicellulose being heterogeneous, more complex, and less abundant than cellulose remains less explored. The optimized conditions for the pretreatment of SB and SCT for maximizing the delignification are soaking in aqueous ammonia (SAA), 18.5 wt %, followed by heating at 70 °C for 14 h. The optimization of hydrolysis of SAA pretreated (ptd) SB and SCT by the Box-Behnken design in the first step of saccharification by xylanase (CtXyn11A) and α-l-arabinofuranosidase (PsGH43_12) resulted in the total reducing sugar (TRS) yield of xylooligosaccharides (TRS(XOS)) of 93.2 mg/g ptd SB and 85.1 mg/g ptd SCT, respectively. The second step of saccharification by xylosidase (BoGH43) gave the TRS yield of 164.7 mg/g ptd SB and 147.2 mg/g ptd SCT. The high-performance liquid chromatography analysis of hydrolysate obtained after the second step of saccharification showed 69.6% xylan-to-xylose conversion for SB and 64.1% for SCT. This study demonstrated the optimization of the pretreatment method and of the enzymatic saccharification by recombinant xylanolytic enzymes, resulting in the efficient saccharification of ptd hemicellulose to TRS by giving 73.5% conversion for SB and 71.1% for SCT. These optimized conditions for the pretreatment and saccharification of sugarcane waste can also be used at a large scale.

Ternary nano-biocomposite films using synergistic combination of bacterial cellulose with chitosan and gelatin for tissue engineering applications.

Ternary nano-biocomposite films of bacterial cellulose-chitosan-gelatin (BC-C-G) were fabricated by immersing the BC pellicles into chitosan and gelatin mixture and subsequently freeze-drying. Scanning electron microscopy (SEM) images of the nano-biocomposite films revealed the presence of interconnected pores, with fibre diameter 20-150 nm. The composite films have a porosity of 95.3%, and showed good hydrophilicity with swelling ratio of 19 ± 1.8 and in vitro degradability. X-ray diffraction, attenuated total reflectance Fourier transform infrared spectroscopy, and thermogravimetric (TG) analysis results showed some interactions among the molecules of BC, gelatin, and chitosan within the film. The composite film offered good matrix for adhesion and proliferation of L929 fibroblasts cells as indicated by the cell attachment study, FE-SEM of cell-film constructs and cytocompatibility assay. Thus, the nano-biocomposite films of BC-C-G could be of paramount importance as tissue engineering scaffold. The "all-natural" ternary polymer composite films of BC-C-G have not been evaluated before for biomedical applications.

Facile chemo-refining approach for production of micro-nanofibrillated cellulose from bleached mixed hardwood pulp to improve paper quality.

Micro-nanofibrillated cellulose was prepared using bleached mixed hardwood pulp by a low energy consuming chemo-refining approach having potential to be implemented easily in paper industry. Bleached mixed hardwood pulp was pretreated with sodium meta-periodate and sodium chlorite and micro-nanofibrillated by using refining in Valley beater. Scanning electron microscopy images of prepared micro-nanofibrillated cellulose showed 87 % fibre distribution in nano range, 4.47 ±â€¯0.5 g/g water retention value and 2.13 ±â€¯0.1 meq/100 g carboxyl content. Carboxylation effect of given chemical pretreatment was further confirmed by FTIR analysis. Paper handsheets, having bleached mixed hardwood pulp and prepared micro-nano-fibrillated cellulose, resulted in about 5% lower bulk with 27 %, 32 % and 87 % higher breaking length, burst factor and double fold, respectively than control (without nano-fibrillated cellulose). Prepared micro-nanofibrillated cellulose addition didn't show negative effect on pulp drainability (33 °SR). This work showed that micro-nanofibrillated cellulose might also be prepared using conventional routes of paper industry to improve paper properties.

Waste paper: An underutilized but promising source for nanocellulose mining.

Nanocellulose has achieved an inimitable place and value in nano-materials research sector. Promising and exclusive physical, chemical and biological properties of nanocellulose make it an attractive and ideal material for various high end-user applications. Conventionally, the base material for nanocellulose i.e. cellulose is being extracted from various lignocellulosic raw materials (like wood, agro-industrial-residues, etc.) using pulping followed by bleaching sequences. As an alternate to lignocellulosic raw materials, waste paper also showed potential as a competent raw material due to its abundant availability and high cellulosic content (60-70%) with comparatively less hemicelluloses (10-20%) and lignin (5-10%) without any harsh treatments. The production yields of nanocellulose were reported to vary from 1.5% to 64% depending upon the waste papers and treatments given. The diameters of these nanocelluloses were reported in the range of 2-100 nm and crystallinity range around 54-95%. Thermal degradation of waste paper nanocellulose was varied from 187 °C to 371 °C. Although these properties are comparable with the nanocellulose obtained from lignocellulosic raw materials, yet waste paper is an underutilized source for nanocellulose preparation due to its ordinary fate of recycling, dumping and incineration. In the sight of necessity and possibility of waste paper utilization, this article reviews the outcomes of research carried out for preparation of nanocellulose using waste paper as a source of cellulose. There is a need of sincere investigation to convert this valuable waste to wealth i.e. waste papers to nanocellulose, which will be helpful in solid waste management to protect environment in economical way.

Production of crude cellulase and xylanase from Trichoderma harzianum PPDDN10 NFCCI-2925 and its application in photocopier waste paper recycling.

This paper implies production of cellulase and xylanase enzyme using a potent strain of Trichoderma harzianum for the efficient deinking of photocopier waste papers. Different nutritional and environmental factors were optimized for higher production of cellulase along with xylanase. After fermentation, maximum enzyme extraction was achieved from fermented matter using a three-step extraction process with increased efficiency by 26.6-29.3 % over single-step extraction. Static solid state was found as the best fermentation type using wheat bran (WB) as carbon source and ammonium ferrous sulfate (0.02 M) as nitrogen source. Subsequently, inoculum size (8 × 10(6) CFU/gds), incubation days (4 days), temperature (34 °C), initial pH (6.0), and moisture ratio (1:3) significantly affected the enzyme production. Cellulase and xylanase activities were found to be maximum at pH 5.5 and temperature 55-60 °C with good stability (even up to 6 h). Furthermore, this crude enzyme was evaluated for the deinking of photocopier waste papers without affecting the strength properties with improved drainage as an additional advantage. The crude enzyme-deinked pulp showed 23.6 % higher deinking efficiency and 3.2 % higher brightness than chemically deinked pulp. Strength properties like tensile, burst indices, and folding endurance were also observed to improve by 6.7, 13.4, and 10.3 %, respectively, for enzyme-deinked pulp. However, the tear index was decreased by 10.5 %. The freeness of the pulp was also increased by 21.6 % with reduced drainage time by 13.9 %.