Assessment of environmental and carcinogenic health hazards from heavy metal contamination in sediments of wetlands.

Sediment contamination jeopardizes wetlands by harming aquatic organisms, disrupting food webs, and reducing biodiversity. Carcinogenic substances like heavy metals bioaccumulate in sediments and expose consumers to a greater risk of cancer. This study reports Pb, Cr, Cu, and Zn levels in sediments from eight wetlands in India. The Pb (51.25 ± 4.46 µg/g) and Cr (266 ± 6.95 µg/g) concentrations were highest in Hirakud, Cu (34.27 ± 2.2 µg/g) in Bhadrak, and Zn (55.45 ± 2.93 µg/g) in Koraput. The mean Pb, Cr, and Cu values in sediments exceeded the toxicity reference value. The contamination factor for Cr was the highest of the four metals studied at Hirakud (CF = 7.60) and Talcher (CF = 6.97). Furthermore, high and moderate positive correlations were observed between Cu and Zn (r = 0.77) and Pb and Cr (r = 0.36), respectively, across all sites. Cancer patients were found to be more concentrated in areas with higher concentrations of Pb and Cr, which are more carcinogenic. The link between heavy metals in wetland sediments and human cancer could be used to make policies that limit people's exposure to heavy metals and protect their health.

Metal pollution in freshwater fish: A key indicator of contamination and carcinogenic risk to public health.

Metals are micropollutants that cannot be degraded by microorganisms and are infiltrated into various environmental media, including both freshwater and marine water. Metals from polluted water are absorbed by many aquatic species, especially fish. Fish is a staple food in the diets of many regions in the world; hence, both the type and concentration of metals accumulated and transferred from contaminated water sources to fish must be determined and assessed. In this study, the heavy metal concentration was determined and assessed in fish collected from freshwater sources via published literature and Estimated Daily Intake (EDI), Target hazard quotient (THQ), and Carcinogenic Risk (CR) analyses, aiming to examine the metal pollution in freshwater fish. The fish was used as a bioindicator, and Geographic information system (GIS) was sued to map the polluted regions. The results confirmed that Pb was detected in fish sampled at 28 locations, Cr at 24 locations, Cu and Zn at 30 locations, with values Pb detected ranging from 0.0016 mg kg-1 to 44.3 mg kg-1, Cr detected ranging from 0.07 mg kg-1 to 27 mg kg-1, Cu detected ranging from 0.031 mg kg-1 to 35.54 mg kg-1, and Zn detected ranging from 0.242 mg kg-1 to 103.2 mg kg-1. The strongest positive associations were discovered between Cu-Zn (r = 0.74, p < 0.05) and Cr-Zn (r = 0.57, p < 0.05). Spatial distribution maps depicting the consumption of fish as food and its corresponding Pb and Cr intake revealed a higher incidence of both carcinogenic and non-carcinogenic health concerns attributed to Pb and Cr in the region with populations consuming the fish.

Soil treatment using a biosurfactant producing bacterial consortium in rice fields contaminated with oily sludge- a sustainable approach.

A consortium of two biosurfactant-producing bacteria (Bacillus pumilus KS2 and Bacillus cereus R2) was developed to remediate petroleum hydrocarbon-contaminated paddy soil. Soil samples from a heavily contaminated rice field near Assam's Lakwa oilfield were collected and placed in earthen pots for treatment. After each month of incubation, 50 g of soil from each earthen pot was collected, and the soil TPH (ppm) in each sample was determined. The extracted TPH samples were analysed by Gas chromatography-mass spectrometry (GC-MS) to confirm microbial degradation. The soil samples were examined for changes in pH, conductivity, total organic content (TOC), water holding capacity, and total nitrogen content in addition to TPH degradation. An increasing trend in TPH degradation was observed with each passing month. After six months of treatment, the sample with the lowest initial TPH concentration (1735 ppm) had the highest degradation (91.24%), while the soil with the highest amount of TPH (5780 ppm) had the lowest degradation (74.35%). A wide range of aliphatic hydrocarbons found in soil samples was degraded by the bacterial consortium. The soil samples contained eight different low- and high-molecular-weight PAHs. Some were fully mineralized, while others were significantly reduced. With the decrease in the TPH level in the polluted soil, a significant improvement in the soil's physicochemical qualities (such as pH, electrical conductivity, total organic content, and water-holding capacity) was observed.

Biodegradation of hazardous naphthalene and cleaner production of rhamnolipids - Green approaches of pollution mitigation.

Toxic and hazardous waste poses a serious threat to human health and the environment. Green remediation technologies are required to manage such waste materials, which is a demanding and difficult task. Here, effort was made to explore the role of Pseudomonas aeruginosa SR17 in alleviating naphthalene via catabolism and simultaneously producing biosurfactant. The results showed up to 89.2% naphthalene degradation at 35 °C and pH 7. The GC/MS analysis revealed the generation of naphthalene degradation intermediates. Biosurfactant production led to the reduction of surface tension of the culture medium to 34.5 mN/m. The biosurfactant was further characterized as rhamnolipids. LC-MS of the column purified biosurfactant revealed the presence of both mono and di rhamnolipid congeners. Rhamnolipid find tremendous application in medical field and as well as in detergent industry and since they are of biological origin, they can be used as favorable alternative against their chemical counterparts. The study demonstrated that catabolism of naphthalene and concurrent formation of rhamnolipid can result in a dual activity process, namely environmental cleanup and production of a valuable microbial metabolite. Additionally, the present-day application of rhamnolipids is highlighted.

Nanotechnology in combating biofilm: A smart and promising therapeutic strategy.

Since the birth of civilization, people have recognized that infectious microbes cause serious and often fatal diseases in humans. One of the most dangerous characteristics of microorganisms is their propensity to form biofilms. It is linked to the development of long-lasting infections and more severe illness. An obstacle to eliminating such intricate structures is their resistance to the drugs now utilized in clinical practice (biofilms). Finding new compounds with anti-biofilm effect is, thus, essential. Infections caused by bacterial biofilms are something that nanotechnology has lately shown promise in treating. More and more studies are being conducted to determine whether nanoparticles (NPs) are useful in the fight against bacterial infections. While there have been a small number of clinical trials, there have been several in vitro outcomes examining the effects of antimicrobial NPs. Nanotechnology provides secure delivery platforms for targeted treatments to combat the wide range of microbial infections caused by biofilms. The increase in pharmaceuticals' bioactive potential is one of the many ways in which nanotechnology has been applied to drug delivery. The current research details the utilization of several nanoparticles in the targeted medication delivery strategy for managing microbial biofilms, including metal and metal oxide nanoparticles, liposomes, micro-, and nanoemulsions, solid lipid nanoparticles, and polymeric nanoparticles. Our understanding of how these nanosystems aid in the fight against biofilms has been expanded through their use.

Synthesis, characterization, and evaluation of antibacterial efficacy of rhamnolipid-coated zinc oxide nanoparticles against Staphylococcus aureus.

The antimicrobial efficacy of rhamnolipid is well established against a wide range of pathogens. However little is known about the enhancement of antimicrobial efficacy of rhamnolipid in the form of nanoparticles. With a curiosity of enhancing antimicrobial activity, a study has been carried out to evaluate the antimicrobial efficacy of rhamnolipid-coated zinc oxide nanoparticles. The zinc oxide nanoparticles were synthesized with rhamnolipid, produced by Pseudomonas aeruginosa JS29. The rhamnolipid-coated zinc oxide nanoparticles were characterized by FTIR, XRD, TGA, TEM, and SAED. The antimicrobial and antibiofilm efficacy of the nanoparticles was evaluated against Staphylococcus aureus MTCC 96. FTIR, XRD, TEM, and SAED analyses confirmed that the nanoparticles contain both rhamnolipid and zinc as constituents and are polycrystalline with sizes ranging from 40 to 50 nm. At a concentration of 250 µg/ml, rhamnolipid-coated zinc oxide nanoparticles exhibited 80% growth inhibition of the pathogen. Again, at the same concentration, the nanoparticle was observed to inhibit 78% of biofilm formation while disrupting 100% of preformed biofilm. The nanoparticles demonstrated an enhanced inhibitory and antibiofilm efficacy against the pathogen compared to the individual effect of both rhamnolipid and zinc oxide nanoparticles. With the established non-toxicity of rhamnolipid-coated zinc oxide nanoparticles in fibroblast cell lines, the nanoparticles could be a promising pharmaceutical alternative.

Antimicrobial activity of silver nanoparticles synthesised by using microbial biosurfactant produced by a newly isolated Bacillus vallismortis MDU6 strain.

Microbial biosurfactants has evolved as green molecules and their chemical diversity has gained momentum in recent time not only in the field of environmental and industrial sectors but also in the pharmaceutical sector. In this study, an effort was made for the biosynthesis of silver nanoparticle (AgNPs) having antimicrobial and non-cytotoxic activities with the help of microbial biosurfactant extracted from a novel Bacillus vallismortis strain MDU6 (Genbank accession no. MH382951) from petroleum oil logged soil sample in Dibrugarh, Assam. The isolate shows excellent potential for the production of biosurfactant by reducing the surface tension of diesel supplemented medium up to 56.57% only within 5 days. FTIR spectra of the crude biosurfactant show the presence of ʋCH2 (asymmetric stretching), ʋCH2 (symmetric stretching), ʋC=C (stretch), ʋC-C (stretch), ʋC-H (bending), ʋC-O (stretch) and ʋC-H (bending) functional groups and LC-MS/MS analysis confirms it as a cyclic lipopeptide which is a mixture of surfactin and iturin. The synthesized AgNPs showed excellent antimicrobial activities against Escherichia coli (ATCC no. 25922), Listeria monocytogenes (ATCC No. BAA-751), Staphylococcus aureus (ATCC No. 9542) and Bacillus subtilis (ATCC no. 6051) and showed no cytotoxicity against primary mouse liver cell lines.

Biosynthesis of AgNPs using aqueous leaf extract of Ipomoea eriocarpa and their anti-inflammatory effect on carrageenan-induced paw edema in male Wistar rats.

Silver nanoparticles (AgNPs) were synthesised from aqueous Ag nitrate through a simple, competent and eco-friendly method using the leaf extract of Ipomoea eriocarpa as reducing as well as capping agent. Ultraviolet-visible absorption spectroscopy was used to confirm the formation of AgNPs which displayed the substantiation of surface plasmon bands at 425 nm. The NPs were also characterised using Fourier transformer infrared spectroscopy, X-ray diffraction method, transmission electron microscope and zeta potential. The characterisation study confirmed the formation of AgNPs, their spherical shape and average diameter of 12.85 ± 8.65 nm. Zeta potential value of -20.5 mV suggested that the AgNPs are stable in the suspension. The aqueous extract and the AgNPs were further screened for in vivo anti-inflammatory activity using carrageenan-induced paw edema in male Wistar rats. The study demonstrated that the AgNPs (1 ml kg-1) had a significant (p < 0.05) anti-edemic effect and inhibition was observed from the first hour (21.31 ± 1.34) until the sixth hour (52.67 ± 1.41), when the inhibitory effect was greatest and superior to the aqueous extract and the standard, diclofenac.

Characterization of Biosurfactant Produced during Degradation of Hydrocarbons Using Crude Oil As Sole Source of Carbon.

Production and spillage of petroleum hydrocarbons which is the most versatile energy resource causes disastrous environmental pollution. Elevated oil degrading performance from microorganisms is demanded for successful microbial remediation of those toxic pollutants. The employment of biosurfactant-producing and hydrocarbon-utilizing microbes enhances the effectiveness of bioremediation as biosurfactant plays a key role by making hydrocarbons bio-available for degradation. The present study aimed the isolation of a potent biosurfactant producing indigenous bacteria which can be employed for crude oil remediation, along with the characterization of the biosurfactant produced during crude oil biodegradation. A potent bacterial strain Pseudomonas aeruginosa PG1 (identified by 16s rDNA sequencing) was isolated from hydrocarbon contaminated soil that could efficiently produce biosurfactant by utilizing crude oil components as the carbon source, thereby leading to the enhanced degradation of the petroleum hydrocarbons. Strain PG1 could degrade 81.8% of total petroleum hydrocarbons (TPH) after 5 weeks of culture when grown in mineral salt media (MSM) supplemented with 2% (v/v) crude oil as the sole carbon source. GCMS analysis of the treated crude oil samples revealed that P. aeruginosa PG1 could potentially degrade various hydrocarbon contents including various PAHs present in the crude oil. Biosurfactant produced by strain PG1 in the course of crude oil degradation, promotes the reduction of surface tension (ST) of the culture medium from 51.8 to 29.6 mN m-1, with the critical micelle concentration (CMC) of 56 mg L-1. FTIR, LC-MS, and SEM-EDS studies revealed that the biosurfactant is a rhamnolipid comprising of both mono and di rhamnolipid congeners. The biosurfactant did not exhibit any cytotoxic effect to mouse L292 fibroblastic cell line, however, strong antibiotic activity against some pathogenic bacteria and fungus was observed.

Uptake of Total Petroleum Hydrocarbon (TPH) and Polycyclic Aromatic Hydrocarbons (PAHs) by Oryza sativa L. Grown in Soil Contaminated with Crude Oil.

The purpose of this study was to determine whether total petroleum hydrocarbon (TPH) and polycyclic aromatic hydrocarbons (PAHs) present in crude oil contaminated sites are transferred to roots, shoots and finally the grains of rice crops (Oryza sativa L.) grown in those sites. Soil was artificially contaminated with crude oil at concentrations of 0, 1000, 5000, 10,000, and 15,000 mg/kg, followed by planting of rice seedlings. After harvest, TPH in plant samples were measured, and it was determined that the uptake of TPH by the plants gradually increased as the concentration of oil in soil increased. Further, from GC-MS analysis, it was observed that PAHs including naphthalene and phenanthrene bioaccumulated in rice plant parts. Vital physico-chemical properties of soil were also altered due to crude oil contamination. Our study revealed that rice plants grown in crude oil polluted sites can uptake TPH including PAHs, thus emphasising the importance of prior investigation of soil condition before cultivation of crops.

Microemulsion synthesis of silver nanoparticles using biosurfactant extracted from Pseudomonas aeruginosa MKVIT3 strain and comparison of their antimicrobial and cytotoxic activities.

In the present study, an efficient biosurfactant producing bacterial strain Pseudomonas aeruginosa MKVIT3 was isolated from an oil logging area in Vellore district of Tamil Nadu, India. Liquid chromatography-mass spectrometry (LC-MS/MS) analysis was performed for the identification of different congeners present in the extracted biosurfactant. The column purified biosurfactant was used to stabilise the formation of silver nanoparticles (NP) using borohydrate reduction in reverse micelles. The silver NP were characterised using UV-vis absorption spectroscopy, Powder-XRD TEM analysis and zeta potential. A comparative study of the antimicrobial activity and cytotoxic efficacy was done for the extracted purified biosurfactant and the silver NP. The LC-MS/MS analysis of the biosurfactant revealed the presence of five rhamnolipid congeners. The synthesised silver NP showed the characteristic absorption peak in UV-vis at 440 nm. Powder-XRD and TEM analysis revealed the average particle size of the NP as 17.89 ± 8.74 nm as well as their cubic structure. Zeta potential value of -30.9 mV suggested that the silver NPs are stable in the suspension. Comparative study of the antimicrobial activity revealed that the silver NP are more potent than the biosurfactant in inhibiting the growth of microbes. Cytotoxic activity revealed that the biosurfactant are more effective than the synthesised silver NP.

Development of an Efficient Bacterial Consortium for the Potential Remediation of Hydrocarbons from Contaminated Sites.

The intrinsic biodegradability of hydrocarbons and the distribution of proficient degrading microorganisms in the environment are very crucial for the implementation of bioremediation practices. Among others, one of the most favorable methods that can enhance the effectiveness of bioremediation of hydrocarbon-contaminated environment is the application of biosurfactant producing microbes. In the present study, the biodegradation capacities of native bacterial consortia toward total petroleum hydrocarbons (TPH) with special emphasis to poly aromatic hydrocarbons were determined. The purpose of the study was to isolate TPH degrading bacterial strains from various petroleum contaminated soil of Assam, India and develop a robust bacterial consortium for bioremediation of crude oil of this native land. From a total of 23 bacterial isolates obtained from three different hydrocarbons contaminated samples five isolates, namely KS2, PG1, PG5, R1, and R2 were selected as efficient crude oil degraders with respect to their growth on crude oil enriched samples. Isolates KS2, PG1, and R2 are biosurfactant producers and PG5, R1 are non-producers. Fourteen different consortia were designed involving both biosurfactant producing and non-producing isolates. Consortium 10, which comprises two Bacillus strains namely, Bacillus pumilus KS2 and B. cereus R2 (identified by 16s rRNA sequencing) has shown the best result in the desired degradation of crude oil. The consortium showed degradation up to 84.15% of TPH after 5 weeks of incubation, as revealed from gravimetric analysis. FTIR (Fourier transform infrared) and GCMS (Gas chromatography-mass spectrometer) analyses were correlated with gravimetric data which reveals that the consortium has removed a wide range of petroleum hydrocarbons in comparison with abiotic control including different aliphatic and aromatic hydrocarbons.

Utilization of Paneer Whey Waste for Cost-Effective Production of Rhamnolipid Biosurfactant.

The present study aimed at isolating rhamnolipid biosurfactant-producing bacteria that could utilize paneer whey, an abundant waste source as sole medium for the production purpose. Pseudomonas aeruginosa strain, SR17, was isolated from hydrocarbon-contaminated soil that could efficiently utilize paneer whey for rhamnolipid production and reduce surface tension of the medium from 52 to 26.5 mN/m. The yield of biosurfactant obtained was 2.7 g/l, upgraded to 4.8 g/l when supplemented with 2 % glucose and mineral salts. Biochemical, FTIR, and LC-MS analysis revealed that extracted biosurfactant is a combination of both mono and di-rhamnolipid congeners. The critical micelle concentration (CMC) was measured to be 110 mg/l. Emulsification activity of the biosurfactant against n-hexadecane, olive oil, kerosene, diesel oil, engine oil, and crude oil were found to be 83, 88, 81, 92, 86, and 100 %, respectively. The rhamnolipid was detected to be non-toxic against mouse fibroblastic cell line L292.