An efficient and simple SERS approach for trace analysis of tetrahydrocannabinol and cannabinol and multi-cannabinoid detection.

Many countries have legalized cannabis and its derived products for multiple purposes. Consequently, it has become necessary to develop a rapid, effective, and reliable tool for detecting delta-9-tetrahydrocannabinol (THC) and cannabinol (CBN), which are important biologically active compounds in cannabis. Herein, we have fabricated SERS chips by using glancing angle deposition and tuned dimensions of silver nanorods (AgNRs) for detecting THC and CBN at low concentrations. Experimental and computational results showed that the AgNR substrate with film thickness (or nanorod length) of 150 nm, corresponding to nanorod diameter of 79 nm and gap between nanorods of 23 nm, can effectively sense trace THC and CBN with good reproducibility and sensitivity. Due to limited spectral studies of the cannabinoids in previous reports, this work also explored towards identifying characteristic Raman lines of THC and CBN. This information is critical to further reliable data analysis and interpretation. Moreover, multianalyte detection of THC and CBN in a mixture was successfully demonstrated by applying an open-source independent component analysis (ICA) model. The overall method is fast, sensitive, and reliable for sensing trace THC and CBN. The SERS chip-based method and spectral results here are useful for a variety of cannabis testing applications, such as product screening and forensic investigation.

Influence of an Annealing Temperature in a Vacuum Atmosphere on the Physical Properties of Indium Tin Oxide Nanorod Films.

In the present study, indium tin oxide (ITO) nanorod films were produced by usage of ion-assisted electron-beam evaporation with a glancing angle deposition technique. The as-produced ITO nanorod films were annealed in the temperature range of 100-500 °C for two hours in a vacuum atmosphere. The as-produced ITO nanorod films exhibited (222) and (611) preferred orientations from the X-ray diffraction pattern. After vacuum annealing at 500 °C, the ITO nanorod films demonstrated many preferred orientations and the improvement of film crystallinity. The sheet resistance of the as-produced ITO nanorod films was 11.92 Ω/ and was found to be 13.63 Ω/ by annealing at 500 °C. The as-produced and annealed ITO nanorod films had a rod diameter of around 80 nm and transmittance in a visible zone of around 90%. The root mean square roughness of the as-produced ITO nanorod film's surface was 5.49 nm, which increased to 13.77 nm at an annealing temperature of 500 °C. The contact angle of the as-produced ITO nanorod films was 110.9° and increased to 116.5° after annealing at 500 °C.

Study of Annealing Influence on Basic Properties of Indium Tin Oxide Nanorod Films Deposited Using Glancing Angle Ion-Assisted Electron Beam Evaporation.

Indium tin oxide (ITO) nanorod films were deposited onto glass slides and Si wafers using ionassisted electron beam evaporation with a glancing angle deposition technique. The annealing influence on the basic properties of the as-deposited ITO nanorod films was studied in the range of 100-500 °C for two hours in air. The crystallinity of the ITO nanorod films was enhanced with the increasing annealing temperature, and the average transmission of the as-deposited ITO nanorod films in the visible range was 90%. This value did not change significantly after the annealing process. The optical bandgap of the as-deposited ITO nanorod films was 3.94 eV and increased slightly after annealing. The sheet resistance of the as-deposited ITO nanorod films was 12.9 Ω/ and increased to 57.8 Ω/ at an annealing temperature of 500 °C. The as-deposited ITO nanorod films showed nanorod structures with average diameters of 79 nm, which changed slightly with the annealing temperature. The root mean square roughness of the as-deposited ITO nanorod films was 7.9 nm and changed slightly with annealing. The as-deposited ITO nanorod films had an average contact angle of 110.9°, which decreased to 64.2° at an annealing temperature of 500 °C. The experimental results showed that varying the annealing temperature influenced the structural, electrical and wettability properties of the ITO nanorod films while the optical properties and surface morphology were almost unaffected.

Tuberculosis determination using SERS and chemometric methods.

Nanostructures have been multiplying the advantages of Raman spectroscopy and further amplify the advantages of Raman spectroscopy is a continuous effort focused on the appropriate design of nanostructures. Herein, we designed different shapes of plasmonic nanostructures such as Vertical, Zig Zag, Slant nanorods and Spherical nanoparticles employing the DC magnetron sputtering system as SERS-active substrates for ultrasensitive detection of target molecules. The fabricated plasmonic nanostructures sensitivity and uniformity were exploited by reference dye analyte. These nanostructures were utilized in the label free detection of infectious disease, Tuberculosis (TB). For the first time, TB detection from serum samples using SERS has been demonstrated. Various multivariate statistical methods such as principal component analysis, support vector machine, decision tree and random forest were developed and tested their ability to discriminate the healthy and active TB samples. The results demonstrate the performance of the SERS spectra, chemometric methods and potential of the method in clinical diagnosis.

Surface-enhanced Raman scattering using silver nanocluster on anodic aluminum oxide template sensor toward protein detection.

The affordable surface-enhanced Raman scattering (SERS) substrates, with a structure consisting of densely distributed round-shape silver nanoclusters on anodic aluminum oxide (AAO) template, is fabricated by magnetron sputtering and anodization processes. The physical investigations show that the silver nanoclusters with size distribution ranging from 10 to 30 nm uniformly distributed on the top and in the bottom of the AAO nanochannels. The SERS activities from adsorbed probe molecules, i.e., methylene blue, on the SERS substrate surface indicate a high Raman enhancement factor for trace organic analysis. The SERS substrate is successfully utilized in the detection of a trace amount of three different proteins, bovin serum albumin, immunoglobulin G, and cardiac troponin T, also adsorbed on the substrate surface. Several spectral bands containing important molecular structures of these proteins are clearly observed and identified. The obtained results indicated a step forward to label-free biomolecular detections in chip-based biosensors.

Electrochemical detection on electrowetting-on-dielectric digital microfluidic chip.

In this work, the use of three-electrode electrochemical sensing system with an electrowetting-on-dielectric (EWOD) digital microfluidic device is reported for quantitative analysis of iodide. T-junction EWOD mixer device was designed using arrays of 50-µm spaced square electrodes for mixing buffer reagent and analyte droplets. For fabrication of EWOD chips, 5-µm thick silver EWOD electrodes were formed on a glass substrate by means of sputtering and lift-off process. PDMS and Teflon thin films were then coated on the electrodes by spin coating to yield hydrophobic surface. An external three-electrode system consisting of Au working, Ag reference and Pt auxiliary wires were installed over EWOD electrodes at the end of T-junction mixer. In experiment, a few-microliter droplets of Tris buffer and iodide solutions were moved toward the mixing junction and transported toward electrochemical electrodes by EWOD process. A short processing time within seconds was achieved at EWOD applied voltage of 300V. The analyte droplets mixed with different concentrations were successfully analyzed by cyclic voltametry. Therefore, the combination of EWOD digital microfluidic and electrochemical sensing system has successfully been demonstrated for rapid chemical analysis with minimal reagent consumption.