Standoff Detection of Oil and Powder Mixtures at 12 Meters Using a Tunable Quantum Cascade Laser-Based System with a Close Focus Telescope and Uncooled Infrared Detector.

We have designed and demonstrated a quantum cascade laser (QCL) based standoff system that utilizes an uncooled mercury cadmium telluride (MCT) detector with lock-in signal processing for chemical identification at a distance of 12.5 meters in indoor ambient light conditions. In the system, a tunable quad-QCL operating (1 MHz) in quasi-continuous wave mode between 8.45 and 10.03 µm (∼1182 to 1000 cm-1) serves as the active mid-infrared source for remotely interrogating mineral, powder, and thin film oil samples including powder mixtures (6, 12.5, 25, and 50%) of crystalline quartz (SiO2) in KBr. Light as reflected from a given sample is collected using a 10-inch (25.4 cm) Dall Kirkham telescope and coupled with ZnSe optics to an uncooled MCT detector. The mixture dependence of the highly transparent KBr and strongly absorbing quartz was found to fit a modified version of the Schatz reflectance model for compacted powder mixtures. All reflectance spectra reported are relative to an Au-coated diffuse reflector. A NIST traceable polystyrene standard reflector was also used to determine the QCL wavelength tuning range and calibration.

Spatial Heterodyne Raman Spectrometer (SHRS) for In Situ Chemical Sensing Using Sapphire and Silica Optical Fiber Raman Probes.

A spatial heterodyne Raman spectrometer (SHRS), constructed using a modular optical cage and lens tube system, is described for use with a commercial silica and a custom single-crystal (SC) sapphire fiber Raman probe. The utility of these fiber-coupled SHRS chemical sensors is demonstrated using 532 nm laser excitation for acquiring Raman measurements of solid (sulfur) and liquid (cyclohexane) Raman standards as well as real-world, plastic-bonded explosives (PBX) comprising 1,3,5- triamino- 2,4,6- trinitrobenzene (TATB) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) energetic materials. The SHRS is a fixed grating-based dispersive interferometer equipped with an array detector. Each Raman spectrum was extracted from its corresponding fringe image (i.e., interferogram) using a Fourier transform method. Raman measurements were acquired with the SHRS Littrow wavelength set at the laser excitation wavelength over a spectral range of ∼1750 cm-1 with a spectral resolution of ∼8 cm-1 for sapphire and ∼10 cm-1 for silica fiber probes. The large aperture of the SHRS allows much larger fiber diameters to be used without degrading spectral resolution as demonstrated with the larger sapphire collection fiber diameter (330 µm) compared to the silica fiber (100 µm). Unlike the dual silica fiber Raman probe, the dual sapphire fiber Raman probe did not include filtering at the fiber probe tip nearest the sample. Even so, SC sapphire fiber probe measurements produced less background than silica fibers allowing Raman measurements as close as ∼85 cm-1 to the excitation laser. Despite the short lengths of sapphire fiber used to construct the sapphire probe, well-defined, sharp sapphire Raman bands at 420, 580, and 750 cm-1 were observed in the SHRS spectra of cyclohexane and the highly fluorescent HMX-based PBX. SHRS measurements of the latter produced low background interference in the extracted Raman spectrum because the broad band fluorescence (i.e., a direct current, or DC, component) does not contribute to the interferogram intensity (i.e., the alternating current, or AC, component). SHRS spectral resolution, throughput, and signal-to-noise ratio are also discussed along with the merits of using sapphire Raman bands as internal performance references and as internal wavelength calibration standards in Raman measurements.

Development of a Protein-based Human Identification Capability from a Single Hair.

Shed human hair (lacking root nuclear DNA) frequently contributes important information to forensic investigations involving human identification. Detection of genetic variation observed in amino acid sequences of hair proteins provides a new suite of identity markers that augment microscopic hair analysis and mitochondrial DNA sequencing. In this study, a new method that completely dissolves single hairs using a combination of heat, ultrasonication, and surfactants was developed. Dissolved proteins were digested and genetically variant peptide (GVP) profiles were obtained for single hairs (25 mm) via high-resolution nanoflow liquid chromatography-based mass spectrometry and a novel exome-driven bioinformatic approach. Overall, 6519 unique peptides were identified and a total of 57 GVPs were confirmed. Random match probabilities ranged between 2.6 × 10-2 and 6.0 × 10-9 . The new bioinformatic strategy and ability to analyze GVPs in forensically relevant samples sizes demonstrate applicability of this approach to distinguish individuals in forensic contexts.

Dielectrophoretic forces on the nanoscale.

We have developed a method of calculation of the dielectrophoretic force on a nanoparticle in a fluid environment where variations in the electric field and electric field gradients are on the same nanoscale as the particle. The Boundary Element Dielectrophoretic Force (BEDF) method involves constructing a solvent-accessible or molecular surface surrounding the particle, calculating the normal component of the electric field at the surface boundary elements, and then solving a system of linear equations for the induced surface polarization charge on each element. Different surface elements of the molecule may experience quite different polarizing electric fields, unlike the situation in the point dipole approximation. A single 100-A-radius ring test configuration is employed to facilitate comparison with the well-known point dipole approximation (PDA). We find remarkable agreement between the forces calculated by the BEDF and PDA methods for a 1 A polarizable sphere. However, for larger particles, the differences between the methods become qualitative as well as quantitative; the character of the force changes from attractive at the origin of the ring for a 50-A sphere, to repulsive for a 75-A sphere. Equally dramatic differences are found in a more complex electrical environment involving two sets of 10 rings.

Electrostatic potentials and fields in the vicinity of engineered nanostructures.

We have developed a method for calculating the electrostatic potentials and fields in the vicinity of geometrically complex engineered nanostructures composed of varying materials in electrolytes of arbitrary pH and ionic strength. The method involves direct summation of charged Debye-Hückel spheres composing the nanostructural surfaces and, by including charge redistribution on the surface of conducting materials held at constant potential, is applicable to mixed boundary conditions. The method is validated by comparison to analytical solutions for an infinite plane (Gouy-Chapman), an infinite cylinder (Bessel functions), and an infinite plane which contains a hole and which is held at constant potential. Excellent agreement between the potentials obtained by our numerical method and the closed form solutions is found for these conditions. The method is applied to the calculation of the electric field enhancement in the vicinity of a nanomembrane whose pore wall is held at constant charge and whose membrane surfaces are held at constant potential. The electric field is found to be enhanced by the charge buildup in the rim of the hole of the nanomembrane; the buildup results from the potential being held constant in the conducting region. Ion concentrations are also calculated. Positive ion rejection is found to be enhanced by this charge buildup in the region of the rim when a constant positive potential is applied.