Exfoliation of a non-van der Waals material from iron ore hematite.

With the advent of graphene, the most studied of all two-dimensional materials, many inorganic analogues have been synthesized and are being exploited for novel applications. Several approaches have been used to obtain large-grain, high-quality materials. Naturally occurring ores, for example, are the best precursors for obtaining highly ordered and large-grain atomic layers by exfoliation. Here, we demonstrate a new two-dimensional material 'hematene' obtained from natural iron ore hematite (α-Fe2O3), which is isolated by means of liquid exfoliation. The two-dimensional morphology of hematene is confirmed by transmission electron microscopy. Magnetic measurements together with density functional theory calculations confirm the ferromagnetic order in hematene while its parent form exhibits antiferromagnetic order. When loaded on titania nanotube arrays, hematene exhibits enhanced visible light photocatalytic activity. Our study indicates that photogenerated electrons can be transferred from hematene to titania despite a band alignment unfavourable for charge transfer.

Observation of a low temperature n-p transition in individual titania nanotubes.

Manipulating the transport properties of titania nanotubes (NTs) is paramount in guaranteeing the material's successful implementation in various solid state applications. Here we present the unique semiconducting properties of individual titania NTs as revealed from thermoelectric and structural studies performed on the same individual NTs. The NTs were in the anatase phase fabricated by anodic oxidation and doped with intrinsic defects created by reducing the lattice thermally. Despite their polycrystalline nature and nanoscale walls, the doped NTs were found to be 4-5 orders of magnitude more electrically conducting than TiO2 nanowires and thin films, with values approaching the bulk single crystal conductivity. The reason for the high conductivity was found to be the high carrier concentration on the order of 1022 cm-3, which counteracted the low mobility values ∼0.006 cm2 V-1 s-1. Furthermore, this high level of carrier concentration transitioned the NTs to a degenerate state, which is the first such example in thermally doped titania NTs. More importantly, our study showed the creation of acceptor states along with donor states in individual nanotubes upon lattice reduction. These acceptor levels were found to be active at low temperatures when donor states were not ionized, shifting the Fermi level (Ef) from the conduction band to the valence band.

Anodically Grown Titania Nanotube Induced Cytotoxicity has Genotoxic Origins.

Nanoarchitectures of titania (TiO2) have been widely investigated for a number of medical applications including implants and drug delivery. Although titania is extensively used in the food, drug and cosmetic industries, biocompatibility of nanoscale titania is still under careful scrutiny due to the conflicting reports on its interaction with cellular matter. For an accurate insight, we performed in vitro studies on the response of human dermal fibroblast cells toward pristine titania nanotubes fabricated by anodic oxidation. The nanotubes at low concentrations were seen to induce toxicity to the cells, whereas at higher concentrations the cell vitality remained on par with controls. Further investigations revealed an increase in the G0 phase cell population depicting that majority of cells were in the resting rather than active phase. Though the mitochondrial set-up did not exhibit any signs of stress, significantly enhanced reactive oxygen species production in the nuclear compartment was noted. The TiO2 nanotubes were believed to have gained access to the nuclear machinery and caused increased stress leading to genotoxicity. This interesting property of the nanotubes could be utilized to kill cancer cells, especially if the nanotubes are functionalized for a specific target, thus eliminating the need for any chemotherapeutic agents.

Rapid Growth of Zinc Oxide Nanotube-Nanowire Hybrid Architectures and Their Use in Breast Cancer-Related Volatile Organics Detection.

A simple direct method for the rapid fabrication of zinc oxide nanotube-nanowire hybrid structure in an environmentally friendly way is described here. Zinc foils were anodized in an aqueous solution of washing soda and baking soda at room temperature in order to obtain the hybrid architecture. At the beginning of the process nanowires were formed on the substrate. The wider nanowires transformed into nanotubes in about a minute and grew in length with time. The morphological integrity was maintained upon heat treatment at temperatures up to the melting point of the substrate (∼400 °C) except that the nanotube wall became porous. The chemiresistor devices fabricated using the heat-treated structure exhibited high response to low-concentration volatile organic compounds that are considered markers for breast cancer. The response was not significantly affected by high humidity or presence of hydrogen, methane, or carbon dioxide. The devices are expected to find use as breath sensors for noninvasive early detection of breast cancer.

Thermal-structural relationship of individual titania nanotubes.

The thermal properties of nano-scale materials are largely influenced by their geometry. The zero, one and quasi one dimensional forms of the same material could exhibit unique thermal transport properties depending upon the shape and nano-scale feature size. In order to gain a clear understanding of the contributions from geometrical scattering effects on thermal transport, it is required to study these nano-materials in a single isolated form rather than in clusters or films. In the past decade, titanium dioxide nanotube arrays fabricated by anodic oxidation of titanium emerged as a useful semiconductor architecture for a variety of applications, particularly for solar energy conversion. Nonetheless, the thermal properties of individual nanotubes that are important for their use in high temperature applications have not been clearly understood. Here we report the thermal transport properties of individual titania nanotubes as revealed by our preliminary study using a suspended microdevice that facilitates the thermal conductivity measurements and crystal structure investigation on the same nanotube. The nanotubes were prepared by anodic oxidation of a titanium foil in HF-DMSO electrolyte at 60 V, having outer diameters in the range of 200 to 300 nm and wall thicknesses of ∼30 to 70 nm in either amorphous or polycrystalline anatase phase. The thermal conductivity of single nanotubes was found to be very close to that of the amorphous phase (1.5 W mK(-1) and 0.85 W mK(-1) respectively) and it was only half of the thermal conductivity of the nanotube arrays in the film form. The thermal conductivity of bulk TiO2 is known to be almost six times higher. The observed thermal conductivity suppression in single nanotubes was explained using a transport model developed by considering diffuse phonon-surface scattering and scattering of phonons by ionized impurities of concentrations in the order of 10(18)-10(19) cm(-3).

Stable and Efficient Perovskite Solar Cells Based on Titania Nanotube Arrays.

Highly ordered 1D TiO2 nanotube arrays are fabricated and applied as nanocontainers and electron transporting material in CH3 NH3 PbI3 perovskite solar cells. The optimized device shows a power conversion efficiency of 14.8%, and improved stability under an illumination of 100 mW cm(-2). This is the best result based on 1D TiO2 nanostructures so far.

Phosphopeptide separation using radially aligned titania nanotubes on titanium wire.

Phosphoproteomic analysis offers a unique view of cellular function and regulation in biological systems by providing global measures of a key cellular regulator in the form of protein phosphorylation. Understanding the phosphorylation changes between normal and diseased cells or tissues offers a window into the mechanism of disease and thus potential targets for therapeutic intervention. A key step in these studies is the enrichment of phosphorylated peptides that are typically separated and analyzed by using liquid chromatography mass spectrometry. The mesoporous titania beads/particles (e.g., Titansphere TiO2 beads from GL Sciences Inc., Japan) that are widely used for phosphopeptide enrichment are expensive and offer very limited opportunities for further performance improvement. Titiania nanotube arrays have shown promising characteristics for phosphopeptide separation. Here we report a proof-of-concept study to evaluate the efficacy of nanotubes on Ti-wire for phosphoproteomics research. We used titania nanotubes radially grown on titanium wires as well as the commercial beads to separate phosphopeptides generated from mouse liver complex tissue extracts. Our studies revealed that the nanotubes on metal wire provide comparable efficacy for enrichment of phophopeptides and offer an ease of use advantage versus mesoporous beads, thus having the potential to become a low cost and more practical material/methodology for phosphopeptide enrichment in biological studies.

Femtosecond to millisecond studies of electron transfer processes in a donor-(π-spacer)-acceptor series of organic dyes for solar cells interacting with titania nanoparticles and ordered nanotube array films.

Time-resolved emission and absorption spectroscopy are used to study the photoinduced dynamics of forward and back electron transfer processes taking place between a recently synthesized series of donor-(π-spacer)-acceptor organic dyes and semiconductor films. Results are obtained for vertically oriented titania nanotube arrays (inner diameters 36 nm and 70 nm), standard titania nanoparticles (25 nm diameter) and, as a reference, alumina nanoparticle (13 nm diameter) films. The studied dyes contain a triphenylamine group as an electron donor, cyanoacrylic acid part as an electron acceptor, and differ by the substituents in a spacer group that causes a shift of its absorption spectra. Despite a red-shift of the dye absorption band resulting in an improved response to the solar spectrum, smaller electron injection rates and smaller extinction coefficients result in reduced dye sensitized solar cell (DSSC) conversion efficiencies. For the most efficient dye, TPC1, electron injection from the hot locally excited state to titania on a time scale of about 100 fs is suggested, while from the relaxed charge transfer state it proceeds in a non-exponential way with time constants from 1 ps to 50 ps. Our results imply that the latter process involves the trap states below the conduction band edge (or the sub-bandgap tail of the acceptor states), localized close to the dye radical cation, and is accompanied by fast electron recombination to the parent dye's ground state. This process should limit the efficiency of DSSCs made using these types of organic dyes. The residual, slower recombination can be described by a stretched exponential decay with a characteristic time of 0.5 µs and a dispersion parameter of 0.33. Both the electron injection and back electron transfer dynamics are similar in titania nanoparticles and nanotubes. Variations between the two film types are only found in the time resolved emission transients, which are explained in terms of the difference in local electric fields affecting the position of the emission bands.

Molecular design of near-IR harvesting unsymmetrical squaraine dyes.

The functionalized unsymmetrical benzothiazole squaraine organic sensitizers 5-carboxy-2-({3-[(3-hexylbenzothiazol-2(3H)-ylidene)methyl]-2-hydroxy-4-oxo-2-cyclobuten-1-ylidene}methyl)-1-hexyl-3,3-dimethyl-3H-indolium (hereafter named as SK-11) and 5-carboxy-2-({3-[(3-hexyl-5-methoxybenzothiazol-2(3H)-ylidene)methyl]-2-hydroxy-4-oxo-2-cyclobuten-1-ylidene}methyl)-1-hexyl-3,3-dimethyl-3H-indolium (coded as SK-12) are designed and developed to observe an intense and wider absorption band in the red/NIR wavelength region. DFT/TDDFT calculations have been performed on the two unsymmetrical squaraine sensitizers to gain insight into their electronic and optical properties. The utility of these dyes in solid state dye sensitized solar cells (SS-DSSCs) is demonstrated.

High-efficiency Förster resonance energy transfer in solid-state dye sensitized solar cells.

Solid-state dye-sensitized solar cells (SS-DSCs) offer the potential to make low cost solar power a reality, however their photoconversion efficiency must first be increased. The dyes used are commonly narrow band with high absorption coefficients, while conventional photovoltaic operation requires proper band edge alignment significantly limiting the dyes and charge transporting materials that can be used in combination. We demonstrate a significant enhancement in the light harvesting and photocurrent generation of SS-DSCs due to Förster resonance energy transfer (FRET). TiO(2) nanotube array films are sensitized with red/near IR absorbing SQ-1 acceptor dye, subsequently intercalated with Spiro-OMeTAD blended with a visible light absorbing DCM-pyran donor dye. The calculated Förster radius is 6.1 nm. The donor molecules contribute a FRET-based maximum IPCE of 25% with a corresponding excitation transfer efficiency of approximately 67.5%.

Synthesis and applications of electrochemically self-assembled titania nanotube arrays.

Highly ordered vertically oriented TiO(2) nanotube arrays fabricated by electrochemical anodization offer a large surface area architecture with precisely controllable nanoscale features. These nanotubes have shown remarkable properties in a variety of applications including, for example, their use as hydrogen sensors, in the photoelectrochemical generation of hydrogen, dye-sensitized and solid-state heterojunction solar cells, photocatalytic reduction of carbon dioxide into hydrocarbons, and as a novel drug delivery platform. Herein we consider the development of the various nanotube array synthesis techniques, different applications of the TiO(2) nanotube arrays, unresolved issues, and possible future research directions.

Toward solar fuels: photocatalytic conversion of carbon dioxide to hydrocarbons.

The past several decades have seen a significant rise in atmospheric carbon dioxide levels resulting from the combustion of hydrocarbon fuels. A solar energy based technology to recycle carbon dioxide into readily transportable hydrocarbon fuel (i.e., a solar fuel) would help reduce atmospheric CO2 levels and partly fulfill energy demands within the present hydrocarbon based fuel infrastructure. We review the present status of carbon dioxide conversion techniques, with particular attention to a recently developed photocatalytic process to convert carbon dioxide and water vapor into hydrocarbon fuels using sunlight.

Long vertically aligned titania nanotubes on transparent conducting oxide for highly efficient solar cells.

Dye-sensitized solar cells consist of a random network of titania nanoparticles that serve both as a high-surface-area support for dye molecules and as an electron-transporting medium. Despite achieving high power conversion efficiencies, their performance is limited by electron trapping in the nanoparticle film. Electron diffusion lengths can be increased by transporting charge through highly ordered nanostructures such as titania nanotube arrays. Although titania nanotube array films have been shown to enhance the efficiencies of both charge collection and light harvesting, it has not been possible to grow them on transparent conducting oxide glass with the lengths needed for high-efficiency device applications (tens of micrometres). Here, we report the fabrication of transparent titania nanotube array films on transparent conducting oxide glass with lengths between 0.3 and 33.0 microm using a novel electrochemistry approach. Dye-sensitized solar cells containing these arrays yielded a power conversion efficiency of 6.9%. The incident photon-to-current conversion efficiency ranged from 70 to 80% for wavelengths between 450 and 650 nm.

Visible to near-infrared light harvesting in TiO2 nanotube array-P3HT based heterojunction solar cells.

The development of high-efficiency solid-state excitonic photovoltaic solar cells compatible with solution processing techniques is a research area of intense interest, with the poor optical harvesting in the red and near-IR (NIR) portion of the solar spectrum a significant limitation to device performance. Herein we present a solid-state solar cell design, consisting of TiO(2) nanotube arrays vertically oriented from the FTO-coated glass substrate, sensitized with unsymmetrical squaraine dye (SQ-1) that absorbs in the red and NIR portion of solar spectrum, and which are uniformly infiltrated with p-type regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT) that absorbs higher energy photons. Our solid-state solar cells exhibit broad, near-UV to NIR, spectral response with external quantum yields of up to 65%. Under UV filtered AM 1.5G of 90 mW/cm(2) intensity we achieve typical device photoconversion efficiencies of 3.2%, with champion device efficiencies of 3.8%.

High-rate solar photocatalytic conversion of CO2 and water vapor to hydrocarbon fuels.

Efficient solar conversion of carbon dioxide and water vapor to methane and other hydrocarbons is achieved using nitrogen-doped titania nanotube arrays, with a wall thickness low enough to facilitate effective carrier transfer to the adsorbing species, surface-loaded with nanodimensional islands of cocatalysts platinum and/or copper. All experiments are conducted in outdoor sunlight at University Park, PA. Intermediate reaction products, hydrogen and carbon monoxide, are also detected with their relative concentrations underlying hydrocarbon production rates and dependent upon the nature of the cocatalysts on the nanotube array surface. Using outdoor global AM 1.5 sunlight, 100 mW/cm(2), a hydrocarbon production rate of 111 ppm cm(-2) h(-1), or approximately 160 microL/(g h), is obtained when the nanotube array samples are loaded with both Cu and Pt nanoparticles. This rate of CO(2) to hydrocarbon production obtained under outdoor sunlight is at least 20 times higher than previous published reports, which were conducted under laboratory conditions using UV illumination.

Vertically aligned single crystal TiO2 nanowire arrays grown directly on transparent conducting oxide coated glass: synthesis details and applications.

Single-crystal one-dimensional (1D) semiconductor architectures are important in materials-based applications requiring a large surface area, morphological control, and superior charge transport. Titania has widespread utility in applications including photocatalysis, photochromism, photovoltaics, and gas sensors. While considerable efforts have focused on the preparation of 1D TiO2, no methods have been available to grow crystalline nanowire arrays directly onto transparent conducting oxide (TCO) substrates, greatly limiting the performance of TiO2 photoelectrochemical devices. Herein, we present a straightforward low temperature method to prepare single crystal rutile TiO2 nanowire arrays up to 5 microm long on TCO glass via a non-polar solvent/hydrophilic substrate interfacial reaction under mild hydrothermal conditions. The as-prepared densely packed nanowires grow vertically oriented from the TCO glass substrate along the (110) crystal plane with a preferred (001) orientation. In a dye sensitized solar cell, N719 dye, using TiO2 nanowire arrays 2-3 microm long we achieve an AM 1.5 photoconversion efficiency of 5.02%.

Highly efficient solar cells using TiO(2) nanotube arrays sensitized with a donor-antenna dye.

Donor antenna dyes provide an exciting route to improving the efficiency of dye sensitized solar cells owing to their high molar extinction coefficients and the effective spatial separation of charges in the charge-separated state, which decelerates the recombination of photogenerated charges. Vertically oriented TiO(2) nanotube arrays provide an optimal material architecture for photoelectrochemical devices because of their large internal surface area, lower recombination losses, and vectorial charge transport along the nanotube axis. In this study, the results obtained by sensitizing TiO(2) nanotube arrays with the donor antenna dye Ru-TPA-NCS are presented. Solar cells fabricated using an antenna dye-sensitized array of 14.4 microm long TiO(2) nanotubes on Ti foil subjected to AM 1.5 one sun illumination in the backside geometry exhibited an overall conversion efficiency of 6.1%. An efficiency of 4.1% was obtained in the frontside illumination geometry using a 1 microm long array of transparent TiO(2) nanotubes subjected to a TiCl(4) treatment and then sensitized with the Ru-TPA-NCS dye. Open circuit voltage decay measurements give insight into the recombination behavior in antenna-dye sensitized nanotube photoelectrodes, demonstrating outstanding properties likely due to a reduction in the influence of the surface traps and reduced electron transfer from TiO(2) to ions in solution.

The effect of TiO2 nanotubes in the enhancement of blood clotting for the control of hemorrhage.

The main biological purpose of blood coagulation is formation of an obstacle to prevent blood loss of hydraulic strength sufficient to withstand the blood pressure. The ability to rapidly stem hemorrhage in trauma patients significantly impacts their chances of survival, and hence is a subject of ongoing interest in the medical community. Herein, we report on the effect of biocompatible TiO2 nanotubes on the clotting kinetics of whole blood. TiO2 nanotubes 10 microm long were prepared by anodization of titanium in an electrolyte comprised of dimethyl sulfoxide and HF, then dispersed by sonication. Compared to pure blood, blood containing dispersed TiO2 nanotubes and blood in contact with gauze pads surface-decorated with nanotubes demonstrated significantly stronger clot formation at reduced clotting times. Similar experiments using nanocrystalline TiO2 nanoparticles showed comparatively weaker clot strengths and increased clotting times. The TiO2 nanotubes appear to act as a scaffold, facilitating fibrin formation. Our results suggest that application of a TiO2 nanotube functionalized bandage could be used to help stem or stop hemorrhage.

Effects of localised, low-voltage pulsed electric fields on the development and inhibition of Pseudomonas aeruginosa biofilms.

This work describes the use of low-voltage (0.5 - 5 V) pulsed electric fields to prevent Pseudomonas aeruginosa biofilm development. Interdigitated electrodes (IDEs) with 29-mum spacing between 22-mum-wide electrodes, were used as a platform where the effect of localised, high-strength electric fields could be tested. Alternating current, square-wave pulses were applied to the IDEs in 1 sec intervals. A two-level, three-variable factorial design experiment was used to detect the effects of applied voltage, frequency, and pulse duty ratio (i.e. percentage of pulsing time over one cycle) on the inhibition of biofilm formation. The observations indicated that a pulse configuration of 1% duty ratio, 5 V, and 200 Hz frequency reduced the area of the electrodes covered by biofilm by 50%. In general, the application of low-duty ratio pulses had a positive effect on preventing biofouling. Comparatively, frequency and applied voltage were observed to have less influence on biofouling.