ABSTRACT
Composites of TiO2 and Ti3C2Tx MXene are of great interest because they combine superior TiO2 photocatalytic activity with excellent MXene conductivity. As these composites have conventionally been prepared using methods requiring high temperatures, a process for producing similar materials at reduced temperature could be beneficial for applications in flexible and printed electronics. Therefore, we used low-temperature dielectric barrier discharge to develop a method for forming crystalline TiO2 by treating Ti3C2Tx MXene surfaces with high-power-density oxygen plasma comprising various energetic and reactive oxygen species, which oxidize MXene surfaces and form TiO2 nanoparticles on disordered graphitic carbon sheets within a few seconds. Scanning electron microscopy was used to observe the plasma-induced morphological changes to elucidate the TiO2 formation mechanism. The MXene surface chemistry was studied in detail using X-ray photoelectron spectroscopy and ab initio modelling. The crystalline phase of TiO2 was further studied using transmission electron microscopy and Raman spectroscopy. The results presented here suggest the formation of small anatase nanoparticles on the surface of MXenes within just seconds of plasma exposure. Nanoparticles grew with prolonged plasma treatment and a transition from anatase to rutile was observed. Considering that the temperature of plasma was always below 70 °C, the oxygen plasma process for the preparation of TiO2/Ti3C2Tx composites is an excellent candidate for application on temperature-sensitive substrates in flexible and printed electronics.
ABSTRACT
Molybdenum disulfide (MoS2) screen-printed working electrodes were developed for dopamine (DA) electrochemical sensing. MoS2 working electrodes were prepared from high viscosity screen-printable inks containing various concentrations and sizes of MoS2 particles and ethylcellulose binder. Rheological properties of MoS2 inks and their suitability for screen-printing were analyzed by viscosity curve, screen-printing simulation and oscillatory modulus. MoS2 inks were screen-printed onto conductive FTO (Fluorine-doped Tin Oxide) substrates. Optical microscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDX) analysis were used to characterize the homogeneity, topography and thickness of the screen-printed MoS2 electrodes. The electrochemical performance was assessed through differential pulse voltammetry. Results showed an extensive linear detection of dopamine from 1 µM to 300 µM (R2 = 0.996, sensitivity of 5.00 × 10-8 A µM-1), with the best limit of detection being 246 nM. This work demonstrated the possibility of simple, low-cost and rapid preparation of high viscosity MoS2 ink and their use to produce screen-printed FTO/MoS2 electrodes for dopamine detection.
