Simultaneous determination of macrolides in water samples by solid-phase extraction and capillary electrophoresis.

Solid-phase extraction (SPE) coupled with capillary electrophoresis (CE) for the determination of macrolide antibiotics (azithromycin, clarithromycin, roxithromycin, tylosin) and tiamulin in water samples was described in this article. These compounds were extracted with different types of sorbents ( Oasis HLB, C18, C8, SDB, and Strata-X) and different masses of sorbents (60 mg, 200 mg, and 500 mg) using different organic solvents (methanol, ethanol, and acetonitrile) and different pH values of water samples (pH 7.00, 8.00, and 9.00). It was found that the highest extraction efficiency of the studied compounds was obtained with 200 mg/3 mL C18 cartridges with methanol as eluent at pH 9.00 of the water sample. The developed SPE-CE method for macrolide antibiotics and tiamulin was validated for linearity, precision, repeatability, the limit of detection (LOD), the limit of quantification (LOQ), and recovery. Good linearity was obtained in the range of 0.3-30 mg L-1 depending on the drug, with correlation coefficients higher than 0.9958 in all cases except clarithromycin (0.9873). Expanded measurement uncertainties were calculated for each pharmaceutical, accounting for 20.31 % (azithromycin), 38.33 % (tiamulin), 28.95 % (clarithromycin), 26.99 % (roxithromycin), and 21.09 % (tiamulin). Uncertainties associated with precision and calibration curves contributed the most to the combined measurement uncertainty. The method was successfully applied to the analysis of production waste-water from the pharmaceutical industry.

Removal of micropollutants using a membrane bioreactor coupled with powdered activated carbon - A statistical analysis approach.

The occurrence of micropollutants in wastewater is largely documented as well as the environmental risk posed by their residues in the aquatic environment. Many investigations have been carried out and plan to study and improve their removal efficiency in existing wastewater treatment plants. At the same time, efforts are being made to develop new technologies or upgrade existing ones to increase the removal of a selection of micropollutants. Due to the great variability in their chemical and physical properties, it would be advisable to find representative compounds or identify the factors which most influence the removal mechanisms under specific conditions. This study analyses the removal efficiencies of a great number of micropollutants in wastewater treated in a membrane bioreactor coupled with powdered activated carbon (PAC), which was the subject of a review article we have recently published. The main operational parameters (i.e. PAC dosage, PAC retention time and sludge retention time) and compound physico-chemical properties (i.e. octanol-water distribution coefficient, charge and molecular weight) were first selected on the basis of a dedicated screening step and then an attempt was carried out to clarify their influence on the removal of micropollutants from wastewater during its treatment. To this end, a statistical analysis, mainly based on exploratory methods (cluster analysis and principal component analysis) and regression analysis, was carried out to compare and discuss the different results published in the scientific literature included in the cited review article. It emerged, that, based on the collected dataset, micropollutant charge and LogDow seem to play the most important role in the removal mechanisms occurring in MBR coupled with PAC.

Miniaturized analytical methods for determination of environmental contaminants of emerging concern - A review.

The determination of contaminants of emerging concern (CECs) in environmental samples has become a challenging and critical issue. The present work focuses on miniaturized analytical strategies reported in the literature for the determination of CECs. The first part of the review provides brief overview of CECs whose monitoring in environmental samples is of particular significance, namely personal care products, pharmaceuticals, endocrine disruptors, UV-filters, newly registered pesticides, illicit drugs, disinfection by-products, surfactants, high technology rare earth elements, and engineered nanomaterials. Besides, an overview of downsized sample preparation approaches reported in the literature for the determination of CECs in environmental samples is provided. Particularly, analytical methodologies involving microextraction approaches used for the enrichment of CECs are discussed. Both solid phase- and liquid phase-based microextraction techniques are highlighted devoting special attention to recently reported approaches. Special emphasis is placed on newly developed materials used for extraction purposes in microextraction techniques. In addition, recent contributions involving miniaturized analytical flow techniques for the determination of CECs are discussed. Besides, the strengths, weaknesses, opportunities and threats of point of need and portable devices have been identified and critically compared with chromatographic methods coupled to mass chromatography. Finally, challenging aspects regarding miniaturized analytical methods for determination of CECs are critically discussed.

Fate of febantel in the aquatic environment-the role of abiotic elimination processes.

Febantel is widely used anthelmintic drug active against a range of gastrointestinal parasites in animals. Despite the fact that it has been detected in the aquatic environment, there is no information on its environmental fate. Therefore, abiotic elimination processes of febantel in the aquatic environment have been studied. The results of direct and indirect photodegradation experiments showed that febantel was persistent against solar radiation. Kinetics of hydrolytic elimination was pH and temperature dependent with half-lives in the range from 210 min to 99 days. Febantel metabolites, fenbendazole and fenbendazole sulfone, were found as major degradation products using high-resolution mass spectrometry. The proposed hydrolytic degradation pathway consisted of the base catalyzed hydrolysis followed by consecutive oxidative cyclization to the five-membered ring of the benzo-imidazole derivative. Aquatic toxicity of febantel and its hydrolytic mixture were evaluated toward the luminescence bacteria Vibrio fischeri. Investigation of febantel sorption onto river sediments showed that the best agreement was obtained with the linear model (R2 > 0.99), while the rate of sorption is the best described with the kinetic model of pseudo-second order. The organic carbon-normalized sorption coefficient, KOC, ranged from 1490 to 3894 L kg-1 for five sediment samples. The results of this research demonstrate that febantel persist in the natural waters and potentially could travel far from the source.

Molecularly imprinted solid phase extraction for simultaneous determination of Δ9-tetrahydrocannabinol and its main metabolites by gas chromatography-mass spectrometry in urine samples.

In presented paper analytical method based on solid-phase extraction using molecularly imprinted polymer and gas chromatography-mass spectrometry has been developed and validated for the confirmation of THC, THC-OH and THC-COOH in urine samples. Non-covalent molecularly imprinted polymers of THC-OH were prepared using different functional monomers (methacrylic acid, 4-vinylpyridine, and 2-hydroxyethyl methacrylate), ethylene glycol dimethacrylate as a cross-linker and 2,2'-azobis-isobutyronitrile as an initiator of radical polymerization. Analytes were extracted from urine samples using prepared polymer sorbent with highest binding selectivity and capability. Before extraction, urine samples were hydrolyzed with alkaline. Elution was performed with chloroform:ethyl acetate (60:40, v/v). Dry extracts were silylated with BSTFA+1% TMCS. Detection and quantification were performed using gas chromatography-mass spectrometry in single ion recording mode. The developed method was linear over the range from LOQ to 150 ng mL(-1) for all three analytes. For THC, THC-OH and THC-COOH LOD was 2.5, 1 and 1 ng mL(-1), and LOQ was 3, 2 and 2 ng mL(-1), respectively. The precision, accuracy, recovery and matrix effect were investigated at 5, 25 and 50 ng mL(-1). In the investigated concentration range recoveries were 71.9% for THC, 78.6% for THC-OH and 75.2% for THC-COOH. Matrix effect was not significant (<10%) for all analytes in the concentration range from 5 ng mL(-1) to 50 ng mL(-1). Extraction recovery on non-imprinted polymer was relatively high indicating high non-specific binding. Optimized and validated method was applied to 15 post-mortem urine samples.

Development and optimization of the determination of pharmaceuticals in water samples by SPE and HPLC with diode-array detection.

This paper describes the development, optimization, and validation of a method for the determination of five pharmaceuticals from different therapeutic classes (antibiotics, anthelmintics, glucocorticoides) in water samples. Water samples were prepared using SPE and extracts were analyzed by HPLC with diode-array detection. The efficiency of 11 different SPE cartridges to extract the investigated compounds from water was tested in preliminary experiments. Then, the pH of the water sample, elution solvent, and sorbent mass were optimized. Except for optimization of the SPE procedure, selection of the optimal HPLC column with different stationary phases from different manufacturers has been performed. The developed method was validated using spring water samples spiked with appropriate concentrations of pharmaceuticals. Good linearity was obtained in the range of 2.4-200 µg/L, depending on the pharmaceutical with the correlation coefficients >0.9930 in all cases, except for ciprofloxacin (0.9866). Also, the method has revealed that low LODs (0.7-3.9 µg/L), good precision (intra- and interday) with RSD below 17% and recoveries above 98% for all pharmaceuticals. The method has been successfully applied to the analysis of production wastewater samples from the pharmaceutical industry.