A diadectid skin impression and its implications for the evolutionary origin of epidermal scales.

Corneous skin appendages are not only common and diverse in crown-group amniotes but also present in some modern amphibians. This raises the still unresolved question of whether the ability to form corneous skin appendages is an apomorphy of a common ancestor of amphibians and amniotes or evolved independently in both groups. So far, there is no palaeontological contribution to the issue owing to the lack of keratin soft tissue preservation in Palaeozoic anamniotes. New data are provided by a recently discovered ichnofossil specimen from the early Permian of Poland that shows monospecific tetrapod footprints associated with a partial scaly body impression. The traces can be unambiguously attributed to diadectids and are interpreted as the globally first evidence of horned scales in tetrapods close to the origin of amniotes. Taking hitherto little-noticed scaly skin impressions of lepospondyl stem amniotes from the early Permian of Germany into account, the possibility has to be considered that the evolutionary origin of epidermal scales deeply roots among anamniotes.

Late Outcomes of Undiagnosed Unilateral Condylar Hyperplasia and Reoccurrence of Mandibular Asymmetry.

Unilateral condylar hyperplasia (UCH) is a rare cause of asymmetrical mandibular overgrowth because of the presence of an atypical growth in the affected condyle. SPECT (single-photon emission computed tomography) can easily establish the presence of an atypical, prolonged growth exceeding far beyond normal condylar growth and activity. A CT, CBCT, or LDCT (computed tomography, cone-beam computed tomography, or low-dose computed tomography) can confirm the diagnosis by evaluating the scope of bone overgrowth, mandibular basis/ramus asymmetry, tendency to condylar head enlargement, changes in bone density, and occurrence of differences in condylar head shapes, size, and bone structure. In most cases, a condylectomy is the procedure of choice in growing cases of UCH to remove the pathological condyle and reduce asymmetry levels. Sometimes, the growth is very slow and progressive over time, causing slowly growing asymmetry with similar symptoms to any other mandibular asymmetry, and this causes some troublesome procedures in UCH diagnostics, resulting in patients being underdiagnosed; it can even lead to some relapses in mandibular asymmetry and skeletal malocclusion after previously performed orthodontic and surgical treatment of such discrepancies. When the source of asymmetry is not identified in time, possible inadequate treatment protocols can be used. If any relapse of facial and mandibular asymmetry re-occur, SPECT and CT evaluation are necessary to evaluate if condylar hyperplasia is present and to establish what kind of surgical intervention should be used in each case.

Molybdenum Disulphide Modified Polylactide for 3D Printed (FDM/FFF) Filaments.

MoS2 is an additive used to improve the tribological properties of plastics. In this work, it was decided to verify the use of MoS2 as a modifier of the properties of PLA filaments used in the additive FDM/FFF technique. For this purpose, MoS2 was introduced into the PLA matrix at concentrations of 0.025-1.0% by weight. Through extrusion, a fibre with a diameter of 1.75 mm was obtained. 3D printed samples with three different filling patterns were subjected to comprehensive thermal (TG, DSC and HDT), mechanical (impact, bending and strength tests), tribological and physicochemical characteristics. The mechanical properties were determined for two different types of fillings, and samples with the third type of filling were used for tribological tests. Tensile strength has been significantly increased for all samples with longitudinal filling with improvement up to 49%. In terms of tribological properties, higher values of the addition (0.5%) caused a significant increase of up to 457% of the wear indicator. A significant improvement in processing properties in terms of rheology was obtained (416% compared to pure PLA with the addition of 1.0%), which translated into more efficient processing, increased interlayer adhesion and mechanical strength. As a result, the quality of printed objects has been improved. Microscopic analysis was also carried out, which confirmed the good dispersion of the modifier in the polymer matrix (SEM-EDS). Microscopic techniques (MO, SEM) allowed for the characterization of the effect of the additive on changes in the printing process (improvement of interlayer remelting) and to assess impact fractures. In the tribological area, the introduced modification did not bring spectacular effects.

Novel Alumina Matrix Composites Reinforced with MAX Phases-Microstructure Analysis and Mechanical Properties.

This article describes the manufacturing of alumina composites with the addition of titanium aluminum carbide Ti3AlC2, known as MAX phases. The composites were obtained by the powder metallurgy technique with three types of mill (horizontal mill, attritor mill, and planetary mill), and were consolidated with the use of the Spark Plasma Sintering method at 1400 °C, with dwelling time 10 min. The influence of the Ti3AlC2 MAX phase addition on the microstructure and mechanical properties of the obtained composites was analyzed. The structure of the MAX phase after the sintering process was also investigated. The chemical composition and phase composition analysis showed that the Ti3AlC2 addition preserved its structure after the sintering process. The increase in fracture toughness for all series of composites has been noted (over 20% compared to reference samples). Detailed stereological analysis of the obtained microstructures also could determine the influence of the applied mill on the homogeneity of the final microstructure and the properties of obtained composites.

Occupational therapy lifestyle intervention added to multidisciplinary treatment for adults living with chronic pain: a feasibility study.

OBJECTIVES: To evaluate the feasibility and outcomes of an occupational therapy lifestyle intervention for adults living with chronic pain. DESIGN: This one-group pre-post interventional study investigated the feasibility and outcomes of the Redesign Your Everyday Activities and Lifestyle with Occupational Therapy (REVEAL(OT)) intervention targeting meaningful activities and lifestyle. SETTINGS: The occupational therapist-led intervention was added to standard multidisciplinary chronic pain treatment at a Danish pain centre. PARTICIPANTS: Of the 40 adult participants aged 18-64 (mean 46.6±10.9 years old, 85% females, chronic pain duration ≥3 months), there were 31 completers. INTERVENTION: Three feasibility rounds were carried out in 2019-2021. The intervention focused on meaningful activities, healthy eating habits and daily physical activity. Methods of didactical presentations, group discussions, personal reflection and experiential learning were used in the intervention composed both of individual and group sessions. OUTCOMES: Primary outcomes were predefined research progression criteria evaluated by the red-amber-green method. Secondary outcomes measured pre-post changes in health-related quality of life and occupational performance and satisfaction. RESULTS: The study demonstrated satisfactory programme adherence (77.5%), patients' self-perceived relevance (97%), timing and mode of delivery (97%) and assessment procedure acceptance (95%). No adverse events causing discontinuation occurred. Recruitment rate (n=5.7 monthly), retention (77.5%) and the fidelity of delivery (83.3%) needed improvement. We observed no improvement in health-related quality of life (mean=0.04, 95% CI -0.03 to 0.12) but positive change in occupational performance (mean=1.80, 95% CI 1.25 to 2.35) and satisfaction (mean=1.95, 95% CI 1.06 to 2.84). The participants reached the minimal clinically important difference for occupational performance (≥3.0 points in 13.8%) and satisfaction (≥3.2 points in 24.0%). CONCLUSIONS: The REVEAL(OT) intervention was feasible to deliver and beneficial for the participants' occupational performance and satisfaction. The interventions' recruitment, retention and delivery strategies need optimisation in a future definitive trial. TRIAL REGISTRATION NUMBER: NCT03903900.

Microstructure, Micro-Mechanical and Tribocorrosion Behavior of Oxygen Hardened Ti-13Nb-13Zr Alloy.

In the present work, an oxygen hardening of near-ß phase Ti-13Nb-13Zr alloy in plasma glow discharge at 700-1000 °C was studied. The influence of the surface treatment on the alloy microstructure, tribological and micromechanical properties, and corrosion resistance is presented. A strong influence of the treatment on the hardened zone thickness, refinement of the α' laths and grain size of the bulk alloy were found. The outer hardened zone contained mainly an oxygen-rich Ti α' (O) solid solution. The microhardness and elastic modulus of the hardened zone decreased with increasing hardening temperature. The hardened zone thickness, size of the α' laths, and grain size of the bulk alloy increased with increasing treatment temperature. The wear resistance of the alloy oxygen-hardened at 1000 °C was about two hundred times, and at 700 °C, even five hundred times greater than that of the base alloy. Oxygen hardening also slightly improved the corrosion resistance. Tribocorrosion tests revealed that the alloy hardened at 700 °C was wear-resistant in a corrosive environment, and when the friction process was completed, the passive film was quickly restored. The results show that glow discharge plasma oxidation is a simple and effective method to enhance the micromechanical and tribological performance of the Ti-13Nb-13Zr alloy.

Microstructure and Mechanical Properties of Alumina Composites with Addition of Structurally Modified 2D Ti3C2 (MXene) Phase.

This study presents new findings related to the incorporation of MXene phases into ceramic. Aluminium oxide and synthesised Ti3C2 were utilised as starting materials. Knowing the tendency of MXenes to oxidation and degradation, particularly at higher temperatures, structural modifications were proposed. They consisted of creating the metallic layer on the Ti3C2, by sputtering the titanium or molybdenum. To prepare the composites, powder metallurgy and spark plasma sintering (SPS) techniques were adopted. In order to evaluate the effectiveness of the applied modifications, the emphasis of the research was placed on microstructural analysis. In addition, the mechanical properties of the obtained sinters were examined. Observations revealed significant changes in the MXenes degradation process, from porous areas with TiC particles (for unmodified Ti3C2), to in situ creation of graphitic carbon (in the case of Ti3C2-Ti/Mo). Moreover, the fracture changed from purely intergranular to cracking with high participation of transgranular mode, analogously. In addition, the results obtained showed an improvement in the mechanical properties for composites with Ti/Mo modifications (an increase of 10% and 15% in hardness and fracture toughness respectively, for specimens with 0.5 wt.% Ti3C2-Mo). For unmodified Ti3C2, enormously cracked areas with spatters emerged during tests, making the measurements impossible to perform.

Graphite Modified Polylactide (PLA) for 3D Printed (FDM/FFF) Sliding Elements.

With the development of 3D printing technology, there is a need to produce printable materials with improved properties, e.g., sliding properties. In this paper, the authors present the possibilities of producing composites based on biodegradable PLA with the addition of graphite. The team created composites with the following graphite weight contents: 1%, 2.5%, 5%, 7.5%, and 10%. Neat material was also subjected to testing. Tribological, mechanical, and chemical properties of the mentioned materials were examined. Measurements were also made after keeping the samples in ageing and climatic ovens. Furthermore, SEM observations of samples before and after friction tests were carried out. It was demonstrated that increasing graphite content caused a significant decrease in wear (PLA + 10% graphite had a wear rate three times lower than for a neat material). The addition of graphite did not adversely affect most of the other properties, but it ought to be noted that mechanical properties changed significantly. After conditioning in a climatic oven PLA + 10% graphite has (in comparison with neat material) 11% lower fracture stress, 47% lower impact strength, and 21% higher Young's modulus. It can be certainly stated that the addition of graphite to PLA is a step towards obtaining a material that is low-cost and suitable for printing sliding spare parts.

Study on Some Thermal and Electrical Properties of Basalt Fabric Modified with Metal and Ceramics as a Result of Magnetron Sputtering.

The main aim of the research was to compare the values of some thermal and electrical parameters obtained for a basalt fabric modified with the metal and ceramics coatings. The surface modification of basalt fabric was made by using a magnetron sputtering technique. Chrome and zirconium(IV) oxide coatings were deposited on the fabric surface. The thermal and electrical properties of selected fabrics were determined. In order to assess the comfort properties of fabrics, the thermal resistance of materials was analyzed. Instrumental color measurement was used for an assessment of the surface of modified and unmodified basalt fabric. Using a non-contact digital color imaging system, DigiEye, an original method of samples surface analysis was presented. As a result of research, the modification of basalt fabric surface for applications in a hot work environment enabled the improvement of thermal properties in relation to the references samples. The first level of protection against contact heat for a contact temperature of 100 °C was obtained for the zirconium(IV) oxide-modified basalt fabric. The first level of protection against radiant heat was obtained for all samples. The highest value for the heat radiant resistance was obtained for the chrome-modified basalt fabric.

The pH Value as a Factor Modifying Bacterial Colonization of Sinonasal Mucosa in Healthy Persons.

OBJECTIVE: The aim of the present study is to determine and compare the range of pH value in nasal and sinus cavities in vivo regarding the presence of bacteria colonizing sinonasal mucosa among healthy subjects. METHODS: The nasal pH value measurement using a portable pH meter (Dx-pH System, Restech) and the microbiological culture swab were taken from beneath the middle turbinate and in the sinus cavity in 39 healthy subjects during maxillary bone corrective osteotomy with the Le Fort I technique. RESULTS: The mean pH value (independently of sex, P = .441) in the healthy sinus cavity was statistically higher than in the nasal middle meatus: 7.96 (SD ± 0.29) versus 7.83 (SD ± 0.30) (P = .032). Forty-eight strains of bacteria were cultured from sinus maxillaries cavities-aerobic 36.8%, aerobic and anaerobic 52.6%, anaerobic only 10.5%-and 23 strains from the nasal meatus-aerobic 25%, aerobic and anaerobic 75%. A statistically significant correlation was found between the type and location of 8 microorganisms, especially Propionibacterium acnes, identified only in the sinus cavities. CONCLUSIONS: Differences in the pH value between the middle nasal meatus and the maxillary sinus are characteristic of healthy subjects and could be associated with the diverse bacterial flora. The role of bacteria Propionibacterium acnes seems to be crucial for the pH range and sinus flora in healthy subjects.

Technical aspects of nasal cavity surgery through the Le Fort I down-fracture approach: An otolaryngologist's point of view based on 90 patients' experience.

BACKGROUND: The downfracture access to septoand turbinoplasty during maxillary osteotomy may be recommended in many cases. One or both of these laryngological interventions may be necessary when, after the patient's clinical evaluation, either an impaired function of nasal breathing or a deviated septum are present. The main postsurgical risk of the procedure is the destabilization of the cartilaginous septum position and its relation to adjacent anatomical structures, a change in the shape of the nose and the presence of a supratip break. OBJECTIVES: In this paper, the authors present their own experience in intranasal procedures, the relevant surgical techniques and possible complications, based on their own clinical findings and on a literature review. MATERIAL AND METHODS: The general aim of the study was to describe the key points and differences between septoand turbinoplasty performed classically and during Le Fort I osteotomy based on 90 orthognathic surgery patient cases. The procedures have been evaluated and compared regarding their advantages and disadvantages. RESULTS: Intraoperative downfracture of the maxilla facilitates the performance of various subsequent procedures in the regions of the nasal cavities and sinuses. Due to a very convenient access to the nasal cavities, it is possible to perform septoor turbinoplasty in patients with nasal airway breathing problems, a deviated septum, and in others. CONCLUSIONS: A combined effort of an otolaryngologist and a maxillofacial team improves the overall nasal breathing with a limited amount of complications. Endoscopy with low-dose computed tomography (CT) is a valuable diagnostic tool for measuring any breathing improvements in nasal capacity. Objective patient nasal breathing problems should be always investigated.

Ten years of observations and demographics of hemimandibular hyperplasia and elongation.

INTRODUCTION: The full epidemiology and etiology of hemimandibular hyperplasia (HH) has not yet been clarified. In most cases it starts before puberty and results in various forms of dento-alveolar and skeletal discrepancies. This study is the first attempt at evaluating and describing some of the authors' key experiences, clinical philosophical approach, and gathered demographic data on hemimandibular hyperplasia and hemimandibular elongation (HE) among the Polish population. MATERIAL AND METHOD: A total of 45 patients (M = 8; F = 37; p < 0.05) with HE (n = 16; 35.6%; p < 0.05), HH (n = 28; 62.2%; p < 0.05), or HH + HE (n = 1; 2.2%; p > 0.05) had been diagnosed and treated. Epidemiological, geographical, and clinical data concerning the occurrence and treatment protocols in these mandibular malformations were measured in the Polish study groups. RESULTS: Women more often suffered from these mandibular malformations (82-87%). The occurrence of the first symptoms was highest at the age of 13-15 years and was statistically significant for both sides (p < 0.05). The disorders were found earlier in young girls, therefore an early compensatory orthodontic treatment in some cases had been used with a limited degree of success (p > 0.05). All values of bone scintigraphy were significant (p < 0.001). CONCLUSIONS: A very fast growth with visible major asymmetry and enlarged condylar head should be an indication for condylectomy. Women's expectations from surgery and treatment are more demanding than men's, a fact that is connected with the predominance of females in the study group. Almost all possible treatment alternatives are not only related with the degree of skeletal deformity, but also with the patient's willingness to undergo any necessary treatment protocols, which in most cases involve more than one stage. Skeletal scintigraphy tests are an important factor in estimating bone growth and possible surgical approaches in these disorders.

The effects of surgically assisted rapid maxillary expansion (SARME) on the dental show and chin projection.

OBJECTIVE: To quantify the postoperative changes of the dental show and chin projection following SARME using 3D CBCT imaging. MATERIAL AND METHODS: 78 patients with transversal maxillary hypoplasia and mandibular hypoplasia who underwent SARME were enrolled into the study. A cone beam computed tomography (CBCT) scan was acquired preoperatively and at least 1 year postoperatively. 3D postoperative changes in the dental show and pogonion position were measured based on soft tissue and hard tissue landmarks. RESULTS: 68 patients (87%) exhibited a postoperative increase in the dental show. The dental show was increased by a mean of 2.2 ± 2.0 mm (p < 0.01). The mean horizontal and vertical displacement of the chin (pogonion) following SARME was 1.6 ± 2.5 mm posteriorly and 1.6 ± 2.0 mm inferiorly (p < 0.01). An inferior displacement of the maxilla and maxillary tooth as well as a consequent clockwise pitch of the mandible seemed to play a role in inducing these postoperative changes. CONCLUSION: An increase in dental show and a posterior and inferior displacement of the chin should be considered prior to SARME to prevent undesirable postoperative changes of the facial esthetics.

Genetic Factors Involved in Mandibular Prognathism.

Mandibular prognathism is defined as an abnormal forward projection of the mandible beyond the standard relation to the cranial base and it is usually categorized as both a skeletal Class III pattern and Angle Class III malocclusion. The etiology of mandibular prognathism is still uncertain, with various genetic, epigenetic, and environmental factors possibly involved. However, many reports on its coexistence in both twins and segregation in families suggest the importance of genetic influences. A multifactorial and polygenic background with a threshold for expression or an autosomal dominant mode with incomplete penetrance and variable expressivity are the most probable inheritance patterns. Linkage analyses have, thus far, shown the statistical significance of such loci as 1p22.1, 1p22.3, 1p32.2, 1p36, 3q26.2, 4p16.1, 6q25, 11q22, 12pter-p12.3, 12q13.13, 12q23, 12q24.11, 14q24.3 to 31.2, and 19p13.2. The following appear among candidate genes: MATN1, EPB41, growth hormone receptor, COL2A1, COL1A1, MYO1H, DUSP6, ARHGAP21, ADAMTS1, FGF23, FGFR2, TBX5, ALPL, HSPG2, EVC, EVC2, the HoxC gene cluster, insulin-like growth factor 1, PLXNA2, SSX2IP, TGFB3, LTBP2, MMP13/CLG3, KRT7, and FBN3. On the other hand, MYH1, MYH2, MYH3, MYH7, MYH8, FOXO3, NFATC1, PTGS2, KAT6B, HDAC4, and RUNX2 expression is suspected to be involved in the epigenetic regulations behind the mandibular prognathism phenotype.

The presence of bacterial microcolonies on the maxillary sinus ciliary epithelium in healthy young individuals.

OBJECTIVE: The aim of this cross-sectional in vitro study was to evaluate the mucosal surfaces of healthy maxillary sinuses, explore different forms of bacterial microorganism colonies present on the mucous membrane, and determine a mucosal surface area they occupy. METHODS: Samples of the maxillary sinus mucosa were collected from 30 healthy patients (M = 11; F = 19). The material was obtained during the Le Fort I osteotomy performed during corrective jaw surgery. The morphological and morphometric analysis of sinus mucosa and bacterial film that was grown on it was performed using scanning electron microscopy (SEM) as well as imaging software. RESULTS: Scanning electron microscopy analysis showed the presence of different bacterium and bacteria-like structures in all the analyzed samples. In most cases, the bacterial film was mostly composed of diplococci-like and streptococci-like structures on the mucosa of the paranasal sinus. In any case, the mucous layer did not cover the whole lining of the evaluated sample. Each colony consists of more than 20 single bacterial cells, which has grown in aggregates. CONCLUSIONS: Under the conditions of normal homeostasis of the body, the maxillary sinuses present diverse bacterial colonization. The bacteria are dispersed or concentrated in single microcolonies of the biofilm on the border of the mucous covering the ciliary epithelium. There is no uniform layer of the biofilm covering the mucosa of the maxillary sinuses. Because the biofilm is detected on healthy individuals sinus mucosa, the clinical question if it may become pathogenic is unclear and require an explanation.

Abdominal Retraction Pad Used in Orthognathic Surgery: A Novel Technique for Nasotracheal Tube Stabilization During Le Fort I Osteotomy.

Many types of surgical osteotomies of the cranio-facial skeleton relay on adequate surgical field preparation. Placement and stabilization of nasotracheal tube during orthognathic surgery is very important. In most cases, long-lasting surgery includes various surgical maneuvers around patient's skull, which depend on accurate nasotracheal tube stabilization. Usage of adhesive plasters for heavy anesthetic tube connector placement and stability might result in tube instability and local disfigurement of nasal projection and visibility in the nasal and infraorbital areas. We present a novel technique for nasotracheal tube stabilization allowing each surgeon controlling tube position, visual evaluation of nasal projection, and its tip during various surgical movements of maxillary bone, such as extrusion, intrusion, rotation or others, during Le Fort I osteotomy. Despite additional time necessary for preparation of surgical field, attachment of the tube and suturing, presented method allows achieving very satisfactory final outcomes with visible access to key nasal structures important in Le Fort I osteotomy. Presented method could be also used in any other facial surgery procedure.

Stem cells and related factors involved in facial nerve function regeneration.

The facial nerve (VII) is one of the most important cranial nerves for head and neck surgeons. Its function is closely related to facial expressions that are individual for every person. After its injury or palsy, its functions can be either impaired or absent. Because of the presence of motor, sensory and parasympathetic fibers, the biology of its repair and function restoration depends on many factors. In order to achieve good outcome, many different therapies can be performed in order to restore as much of the nerve function as possible. When rehabilitation and physiotherapy are not sufficient, additional surgical procedures and therapies are taken into serious consideration. The final outcome of many of them is discussable, depending on nerve damage etiology. Stem cells in facial nerve repair are used, but long-term outcomes and results are still not fully known. In order to understand this therapeutic approach, clinicians and surgeons should understand the immunobiology of nerve repair and regeneration. In this review, potential stem cell usage in facial nerve regeneration procedures is discussed.

Dandy-Walker syndrome with severe velopharyngeal dysfunction: a contraindication for Le Fort I surgery?

Dandy-Walker syndrome is a rare congenital brain deformation. Most symptoms are related with fourth ventricle and skull base malformations. Quite often, symptoms develop from infancy or progress rapidly. Cerebellar dysfunction, lack of muscle coordination, and skull deformities involving eye movement might be present. There are several Dandy-Walker syndrome complex types. We present a 23-year-old patient who had a severe dentofacial deformity with mandibular prognathism and extremely undeveloped maxillary bone resulting in palatopharyngeal and velopharyngeal dysfunction with complete lack of soft palate function resulting in increased speech tone and volume. Performing Le Fort I osteotomy in this case is greatly controversial and might result in even greater loss of function or even its total lack. Velopharyngeal complex is very important, and every surgeon should consider its value while planning Le Fort I osteotomies.

Rhenium-coated glass beads for intracolonic administration attenuate TNBS-induced colitis in mice: Proof-of-Concept Study.

In search for novel effective treatments in inflammatory bowel diseases, a new strategy employing glass beads coated with rhenium nanolayer has been developed and validated in the mouse model of 2,4,6-trinitrobenzene sulfonic acid (TNBS)-induced colitis. Briefly, mice were randomly divided into 5 experimental groups: control (vehicle alone, Group 1); control treated with rhenium-coated glass beads (Group 2); TNBS (Group 3); TNBS treated with rhenium-coated glass beads (Group 4); and TNBS treated with uncoated glass beads (Group 5). Mice from Group 2, 4 and 5 were treated with respective beads (once daily, 5 beads / animal, i.c.) between D3-D6 post-TNBS/vehicle and evaluation of colonic damage was performed on D7, based on macroscopic scoring and clinical parameters. Severe colonic inflammation developed in post-TNBS mice (Group 3) [P <0.001 vs. control (Group 1) for macroscopic score], which was significantly attenuated by treatment with rhenium-coated glass beads (Group 4) [P <0.01 vs. TNBS (Group 3), for macroscopic score]. Neither rhenium-coated glass beads had any effect in control animals (Group 2), nor uncoated glass beads influenced TNBS-induced colitis (Group 5). In conclusion, a novel and attractive strategy for the treatment of colonic inflammation has been proposed; therapy with rhenium-coated glass beads already proved effective in the mouse model of TNBS-induced colitis, now requires further characterization in clinical conditions.

Unique canal communicating between both maxillary sinuses through the palatine recess with hypertrophy of sinuses.

The result of an inappropriate growth of the jaws is in many cases related to abnormalities in the rest of the facial skeleton. We present a 21-year-old patient with a possibly unique anomaly of the maxillary sinus in skeletal class III dentofacial deformity. This anatomical variant has not to our knowledge been previously reported and all clinicians should be aware of it. It presented not only as hypertrophy of the sinuses but also as a communication between the two maxillary sinuses, and might be associated with a severe III class deformity with an extremely narrow maxilla. We describe this as a narrowed maxillary canal with no septum or membrane.