Thermal and Electrochemical Interface Compatibility of a Hydroborate Solid Electrolyte with 3 V-Class Cathodes for All-Solid-State Sodium Batteries.

Thermal stability of solid electrolytes and their compatibility with battery electrodes are key factors to ensure stable cycling and high operational safety of all-solid-state batteries. Here, we study the compatibility of a hydroborate solid electrolyte Na4(B12H12)(B10H10) with 3 V-class cathode active materials: NaCrO2, NaMnO2, and NaFeO2. Among these layered sodium transition metal oxide cathodes, NaCrO2 shows the highest thermal compatibility in contact with the hydroborate solid electrolyte up to 525 °C in the discharged state. Furthermore, the electrolyte remains intact upon the internal thermal decomposition of the charged, that is, desodiated, cathode (Na0.5CrO2) above 250 °C, demonstrating the potential for highly safe hydroborate-based all-solid-state batteries with a wide operating temperature range. The experimentally determined onset temperatures of thermal decomposition of Na4(B12H12)(B10H10) in contact with 3 V-class cathodes surpass those of sulfide and selenide solid electrolytes, exceeding previous thermodynamic calculations. Our results also highlight the need to identify relevant decomposition pathways of hydroborates to enable more valid theoretical predictions.

Impact of Protonation on the Electrochemical Performance of Li7La3Zr2O12 Garnets.

Li7La3Zr 2O12 (LLZO) garnet ceramics are promising electrolytes for all-solid-state lithium-metal batteries with high energy density. However, these electrolytes are prone to Li+/H+ exchange, that is, protonation, resulting in degradation of their Li-ion conductivity. Here, we identify how common processing steps, such as surface cleaning in alcohol or acetone, trigger LLZO partial protonation. We deconvolute the contributions to the electrochemical impedance spectra of both the protonated LLZO phase (HLLZO) and its decomposition products forming upon annealing. While the mixed conduction of H+/Li+ ions in HLLZO decreases the contribution of the electrolyte to the overall impedance, it deteriorates the transport of Li+ ions across the LLZO/Li interface. This is also the case after thermal decomposition of HLLZO, which occurs at significantly lower temperature than that for pristine LLZO. As a result, symmetric Li/LLZO/Li cells suffer from inhomogeneous lithium electrodeposition within the first three cycles when stripping and plating a capacity of 1 mA·h/cm2 per half-cycle at 0.1 mA/cm2. We demonstrate that LLZO protonation is avoided when applying solvents with very low acidity, such as hexane. Such Li/LLZO/Li cells provide stable cycling over more than 300 h, demonstrating the importance of selecting an appropriate solvent for LLZO processing to prevent dendrites formation.

Dynamics of porous and amorphous magnesium borohydride to understand solid state Mg-ion-conductors.

Rechargeable solid-state magnesium batteries are considered for high energy density storage and usage in mobile applications as well as to store energy from intermittent energy sources, triggering intense research for suitable electrode and electrolyte materials. Recently, magnesium borohydride, Mg(BH4)2, was found to be an effective precursor for solid-state Mg-ion conductors. During the mechanochemical synthesis of these Mg-ion conductors, amorphous Mg(BH4)2 is typically formed and it was postulated that this amorphous phase promotes the conductivity. Here, electrochemical impedance spectroscopy of as-received γ-Mg(BH4)2 and ball milled, amorphous Mg(BH4)2 confirmed that the conductivity of the latter is ~2 orders of magnitude higher than in as-received γ-Mg(BH4)2 at 353 K. Pair distribution function (PDF) analysis of the local structure shows striking similarities up to a length scale of 5.1 Å, suggesting similar conduction pathways in both the crystalline and amorphous sample. Up to 12.27 Å the PDF indicates that a 3D net of interpenetrating channels might still be present in the amorphous phase although less ordered compared to the as-received γ-phase. However, quasi elastic neutron scattering experiments (QENS) were used to study the rotational mobility of the [BH4] units, revealing a much larger fraction of activated [BH4] rotations in amorphous Mg(BH4)2. These findings suggest that the conduction process in amorphous Mg(BH4)2 is supported by stronger rotational mobility, which is proposed to be the so-called "paddle-wheel" mechanism.

Molten metal closo-borate solvates.

Solvated lithium closo-dodecaborate, Li2B12H12 with tetrahydrofuran and acetonitrile, show unexpected melting below 150 °C. This feature has been explored to melt-infiltrate Li2B12H12 in a nanoporous SiO2 scaffold. The ionic conductivity of Li2B12H12·xACN reaches 0.08 mS cm-1 in the liquid state at 150 °C making them suitable as battery electrolytes.