Epidemiology of Physeal Fractures and Clinically Significant Growth Disturbances Affecting the Distal Tibia, Proximal Tibia, and Distal Femur: A Retrospective Cohort Study.

INTRODUCTION: Childhood fractures involving the physis potentially result in premature physeal closure that can lead to growth disturbances. Growth disturbances are challenging to treat with associated complications. Current literature focusing on physeal injuries to lower extremity long bones and risk factors for growth disturbance development is limited. The purpose of this study was to provide a review of growth disturbances among proximal tibial, distal tibial, and distal femoral physeal fractures. METHODS: Data were retrospectively collected from patients undergoing fracture treatment at a level I pediatric trauma center between 2008 and 2018. The study was limited to patients 0.5 to 18.9 years with a tibial or distal femoral physeal fracture, injury radiograph, and appropriate follow-up for determination of fracture healing. The cumulative incidence of clinically significant growth disturbance (CSGD) (a growth disturbance requiring subsequent physeal bar resection, osteotomy, and/or epiphysiodesis) was estimated, and descriptive statistics were used to summarize demographics and clinical characteristics among patients with and without CSGD. RESULTS: A total of 1,585 patients met the inclusion criteria. The incidence of CSGD was 5.0% (95% confidence interval, 3.8% to 6.6%). All cases of growth disturbance occurred within 2 years of initial injury. The risk of CSGD peaked at 10.2 years for males and 9.1 years for females. Complex fractures that required surgical treatment, distal femoral and proximal tibial fractures, age, and initial treatment at an outside hospital were significantly associated with an increased risk of a CSGD. DISCUSSION: All CSGDs occurred within 2 years of injury, indicating that these injuries should be followed for a period of at least 2 years. Patients with distal femoral or proximal tibial physeal fractures that undergo surgical treatment are at highest risk for developing a CSGD. LEVEL OF EVIDENCE: Level III Retrospective Cohort Study.

A 3D printed mimetic composite for the treatment of growth plate injuries in a rabbit model.

Growth plate injuries affecting the pediatric population may cause unwanted bony repair tissue that leads to abnormal bone elongation. Clinical treatment involves bony bar resection and implantation of an interpositional material, but success is limited and the bony bar often reforms. No treatment attempts to regenerate the growth plate cartilage. Herein we develop a 3D printed growth plate mimetic composite as a potential regenerative medicine approach with the goal of preventing limb length discrepancies and inducing cartilage regeneration. A poly(ethylene glycol)-based resin was used with digital light processing to 3D print a mechanical support structure infilled with a soft cartilage-mimetic hydrogel containing chondrogenic cues. Our biomimetic composite has similar mechanical properties to native rabbit growth plate and induced chondrogenic differentiation of rabbit mesenchymal stromal cells in vitro. We evaluated its efficacy as a regenerative interpositional material applied after bony bar resection in a rabbit model of growth plate injury. Radiographic imaging was used to monitor limb length and tibial plateau angle, microcomputed tomography assessed bone morphology, and histology characterized the repair tissue that formed. Our 3D printed growth plate mimetic composite resulted in improved tibial lengthening compared to an untreated control, cartilage-mimetic hydrogel only condition, and a fat graft. However, in vivo the 3D printed growth plate mimetic composite did not show cartilage regeneration within the construct histologically. Nevertheless, this study demonstrates the feasibility of a 3D printed biomimetic composite to improve limb lengthening, a key functional outcome, supporting its further investigation as a treatment for growth plate injuries.

Blockade of Osteoclast-Mediated Bone Resorption With a RANKL-Inhibitor Enhances Bone Formation in a Rat Spinal Fusion Model.

STUDY DESIGN: Rat spine fusion model. OBJECTIVE: The present study aimed to determine whether administration of osteoprotegerin (OPG) in a rat model of spinal fusion increases bone volume, bone density, and decreases osteoclasts in the fusion mass. SUMMARY OF BACKGROUND DATA: OPG is a soluble RANK-ligand inhibitor that blocks osteoclast differentiation and activation. This makes it a potential agent to control the remodeling process and enhance bone mass during spinal fusion. MATERIALS AND METHODS: Forty-eight male Sprague-Dawley rats received a one-level spinal fusion of L4-L5 with bone allograft. Rats were then divided into four groups according to initiation of treatment: (1) saline on day 0 (saline), (2) OPG on day 0 (OPG D0), (3) OPG on day 10 (OPG D10), and (4) OPG on day 21 (OPG D21) postsurgery. After their initial injection, rats received weekly subcutaneous injections of OPG (10 mg/kg) and were euthanized six weeks postsurgery. MicroCT analysis of the fusion site and histological analysis of bone surface for quantification of osteoclast lining was performed. RESULTS: Increased bone volume in the fusion site and around the spinous process was seen in OPG D0 and OPG D10 when compared with saline. Mean trabecular thickness was greater in all groups receiving OPG compared with saline, with OPG D0 and OPG D10 having significantly greater mean trabecular thickness than OPG D21. All OPG groups had less bone surface lined with osteoclasts when compared with Saline, with OPG D0 and OPG D10 having fewer than OPG D21. CONCLUSIONS: This study indicates that OPG inhibited osteoclast bone resorption, which led to greater bone at the fusion site. Future studies investigating OPG on its own or in combination with an osteogenic factor to improve spinal fusion outcomes are warranted to further elucidate its potential therapeutic effect.

Polyelectrolyte Complex Hydrogels with Controlled Mechanics Affect Mesenchymal Stem Cell Differentiation Relevant to Growth Plate Injuries.

The growth plate is a complex cartilage structure in long bones that mediates growth in children. When injured, the formation of a "bony bar" can occur which impedes normal growth and can cause angular deformities or growth arrest. Current treatments for growth plate injuries are limited and result in poor patient outcomes, necessitating research toward novel treatments that can prevent bony bar formation and stimulate cartilage regeneration. This study investigates alginate-chitosan polyelectrolyte complex (PEC) hydrogels as an injectable biomaterial system to prevent bony bar formation. Biomaterial properties including stiffness and degradation are quantified, and the effect that material properties have on mesenchymal stem cell (MSC) fate is quantified in vitro. Specifically, this study aims to elucidate the effectiveness of biomaterial-based control over the differentiation behavior of MSCs toward osteogenic or chondrogenic lineages using biochemical metabolite assays and quantitative real time PCR. Further, the PEC hydrogels are employed in a rat growth plate injury model to determine their effectiveness in preventing bony bar formation in vivo. Results indicate that hydrogel composition and material properties affect the differentiation tendency of MSCs in vitro, and the PEC hydrogels show promise as an injectable biomaterial for growth plate injuries.

Analysis of Physeal Fractures from the United States National Trauma Data Bank.

BACKGROUND: Pediatric long-bone physeal fractures can lead to growth deformities. Previous studies have reported that physeal fractures make up 18-30% of total fractures. This study aimed to characterize physeal fractures with respect to sex, age, anatomic location, and Salter-Harris (SH) classification from a current multicenter national database. METHODS: A retrospective cohort study was performed using the 2016 United States National Trauma Data Bank (NTDB). Patients ≤ 18 years of age with a fracture of the humerus, radius, ulna, femur, tibia, or fibula were included. RESULTS: The NTDB captured 132,018 patients and 58,015 total fractures. Physeal fractures made up 5.7% (3291) of all long-bone fractures, with males accounting for 71.0% (2338). Lower extremity physeal injuries comprised 58.6% (1929) of all physeal fractures. The most common site of physeal injury was the tibia comprising 31.8% (1047), 73.9% (774) of which were distal tibia fractures. Physeal fractures were greatest at 11 years of age for females and 14 years of age for males. Most fractures were SH Type II fractures. DISCUSSION AND CONCLUSIONS: Our analysis indicates that 5.7% of pediatric long-bone fractures involved the physis, with the distal tibia being the most common. These findings suggest a lower incidence of physeal fractures than previous studies and warrant further investigation.

Fabrication of Size-Controlled and Emulsion-Free Chitosan-Genipin Microgels for Tissue Engineering Applications.

Chitosan microgels are of significant interest in tissue engineering due to their wide range of applications, low cost, and immunogenicity. However, chitosan microgels are commonly fabricated using emulsion methods that require organic solvent rinses, which are toxic and harmful to the environment. The present protocol presents a rapid, non-cytotoxic, non-emulsion-based method for fabricating chitosan-genipin microgels without the need for organic solvent rinses. The microgels described herein can be fabricated with precise size control. They exhibit sustained release of biomolecules, making them highly relevant for tissue engineering, biomaterials, and regenerative medicine. Chitosan is crosslinked with genipin to form a hydrogel network, then passed through a syringe filter to produce the microgels. The microgels can be filtered to create a range of sizes, and they show pH-dependent swelling and degrade over time enzymatically. These microgels have been employed in a rat growth plate injury model and were demonstrated to promote increased cartilage tissue repair and to show complete degradation at 28 days in vivo. Due to their low cost, high convenience, and ease of fabrication with cytocompatible materials, these chitosan microgels present an exciting and unique technology in tissue engineering.

Material properties and strain distribution patterns of bovine growth plate cartilage vary with anatomic location and depth.

The aim of this study was to assess the bulk material properties and depth-dependent strain distribution of bovine growth plate cartilage. We hypothesized that both moduli and strain distribution are highly depth-, orientation-, and location-dependent. Bovine proximal tibiae (1-month-old) were sliced along the sagittal and coronal planes to create âˆ¼ 4 mm2 samples. Digital image correlation (DIC) was combined with stress relaxation tests for evaluation of bulk modulus (tangent and equilibrium) and depth-dependent strain distribution. A subset of samples was imaged after Col-F staining as well as histological staining (Safranin-O/Fast Green) to evaluate zonal organization and matrix composition. The mean tangent modulus was 4.25 ± 2.46 MPa while the equilibrium modulus was 0.86 ± 0.46 MPa. No significant differences in moduli were found with respect to orientation (sagittal vs coronal face), but sagittal location within the joint was a significant predictor for tangent modulus. Overall moduli values decreased from the periphery to the midline of the joint. Depth-dependent cellular organization, determined by cell density and shape, was highly variable. This heterogeneity may be a biological toughening mechanism. Peak normalized strains were observed most often in the hypertrophic zone. Modulus was significantly lower in the hypertrophic zone as compared to the resting and proliferative zones. This study is the first to evaluate moduli and strain distribution in intact growth plates as a function of depth, orientation, and anatomic location. Future work with growth plate tissue engineering should consider the location- and depth-dependent nature of the native tissue mechanical properties when designing mimetic constructs.

The heterogeneous mechanical properties of adolescent growth plate cartilage: A study in rabbit.

The growth plate is a cartilaginous tissue that functions to lengthen bones in children. When fractured, however, the growth plate can lose this critical function. Our understanding of growth plate fracture and mechanobiology is currently hindered by sparse information on the growth plate's microscale spatial gradients in mechanical properties. In this study, we performed microindentation across the proximal tibia growth plate of 9-week-old New Zealand White rabbits (n = 15) to characterize spatial variations in mechanical properties using linear elastic and nonlinear poroelastic material models. Mean indentation results for Hertz reduced modulus ranged from 380 to 690 kPa, with a peak in the upper hypertrophic zone and significant differences (p < 0.05) between neighboring zones. Using a subset of these animals (n = 7), we characterized zonal structure and extracellular matrix content of the growth plate through confocal fluorescent microscopy and Raman spectroscopy mapping. Comparison between mechanical properties and matrix content across the growth plate showed that proteoglycan content correlated with compressive modulus. This study is the first to measure poroelastic mechanical properties from microindentation across growth plate cartilage and to discern differing mechanical properties between the upper and lower hypertrophic zones. This latter finding may explain the location of typical growth plate fractures. The spatial variation in our reported mechanical properties emphasize the heterogeneous structure of the growth plate which is important to inform future regenerative implant design and mechanobiological models.

Understanding the Transcriptomic Landscape to Drive New Innovations in Musculoskeletal Regenerative Medicine.

PURPOSE OF REVIEW: RNA-sequencing (RNA-seq) is a novel and highly sought-after tool in the field of musculoskeletal regenerative medicine. The technology is being used to better understand pathological processes, as well as elucidate mechanisms governing development and regeneration. It has allowed in-depth characterization of stem cell populations and discovery of molecular mechanisms that regulate stem cell development, maintenance, and differentiation in a way that was not possible with previous technology. This review introduces RNA-seq technology and how it has paved the way for advances in musculoskeletal regenerative medicine. RECENT FINDINGS: Recent studies in regenerative medicine have utilized RNA-seq to decipher mechanisms of pathophysiology and identify novel targets for regenerative medicine. The technology has also advanced stem cell biology through in-depth characterization of stem cells, identifying differentiation trajectories and optimizing cell culture conditions. It has also provided new knowledge that has led to improved growth factor use and scaffold design for musculoskeletal regenerative medicine. This article reviews recent studies utilizing RNA-seq in the field of musculoskeletal regenerative medicine. It demonstrates how transcriptomic analysis can be used to provide insights that can aid in formulating a regenerative strategy.

Emulsion-free chitosan-genipin microgels for growth plate cartilage regeneration.

The growth plate is a cartilage tissue near the ends of children's long bones and is responsible for bone growth. Injury to the growth plate can result in the formation of a 'bony bar' which can span the growth plate and result in bone growth abnormalities in children. Biomaterials such as chitosan microgels could be a potential treatment for growth plate injuries due to their chondrogenic properties, which can be enhanced through loading with biologics. They are commonly fabricated via an emulsion method, which involves solvent rinses that are cytotoxic. Here, we present a high throughput, non-cytotoxic, non-emulsion-based method to fabricate chitosan-genipin microgels. Chitosan was crosslinked with genipin to form a hydrogel network, and then pressed through a syringe filter using mesh with various pore sizes to produce a range of microgel particle sizes. The microgels were then loaded with chemokines and growth factors and their release was studied in vitro. To assess the applicability of the microgels for growth plate cartilage regeneration, they were injected into a rat growth plate injury. They led to increased cartilage repair tissue and were fully degraded by 28 days in vivo. This work demonstrates that chitosan microgels can be fabricated without solvent rinses and demonstrates their potential for the treatment of growth plate injuries.

Anti-VEGF antibody delivered locally reduces bony bar formation following physeal injury in rats.

Physeal injuries can result in the formation of a "bony bar" which can lead to bone growth arrest and deformities in children. Vascular endothelial growth factor (VEGF) has been shown to play a role in bony bar formation, making it a potential target to inhibit bony repair tissue after physeal injury. The goal of this study was to investigate whether the local delivery of anti-VEGF antibody (α-VEGF; 7.5 µg) from alginate:chitosan hydrogels to the tibial physeal injury site in rats prevents bony bar formation. We tested the effects of quick or delayed delivery of α-VEGF using both 90:10 and 50:50 ratio alginate:chitosan hydrogels, respectively. Male and female 6-week-old Sprague-Dawley rats received a tibial physeal injury and the injured site injected with alginate-chitosan hydrogels: (1) 90:10 (Quick Release); (2) 90:10 + α-VEGF (Quick Release + α-VEGF); (3) 50:50 (Slow Release); (4) 50:50 + α-VEGF (Slow Release + α-VEGF); or (5) Untreated. At 2, 4, and 24 weeks postinjury, animals were euthanized and tibiae assessed for bony bar and vessel formation, repair tissue type, and limb lengthening. Our results indicate that Quick Release + α-VEGF reduced bony bar and vessel formation, while also increasing cartilage repair tissue. Further, the quick release of α-VEGF neither affected limb lengthening nor caused deleterious side-effects in the adjacent, uninjured physis. This α-VEGF treatment, which inhibits bony bar formation without interfering with normal bone elongation, could have positive implications for children suffering from physeal injuries.

In vivo degradation rate of alginate-chitosan hydrogels influences tissue repair following physeal injury.

The physis is a cartilaginous tissue in children's long bones that is responsible for bone elongation. Physeal injuries can heal with bony repair tissue known as a "bony bar," and this can cause growth deformities. Current treatments involve surgical resection of the bony bar and insertion of inert materials in hopes of preventing bony bar re-formation and preserving bone elongation. However, these materials frequently fail and the bony bar commonly returns. This study investigated alginate-chitosan hydrogels as interpositional materials to block bony bar formation in a rat model of physeal injury. Further, biomaterial properties such as substrate stiffness, permeability, and degradation rate were studied. Different ratio alginate:chitosan hydrogels with or without calcium cross-linking were tested for their inhibition of bony bar formation and restoration of the injured physis. Alginate:chitosan were mixed (a) 90:10 with calcium (90:10 + Ca); (b) 50:50 with calcium (50:50 + Ca); (c) 50:50 without calcium (50:50 - Ca); and (d) 50:50 made with irradiated alginate (IA) and without calcium. We found that repair tissue was determined primarily by the in vivo degradation rate of alginate-chitosan hydrogels. 90:10 + Ca had a slow degradation rate, prevented cellular infiltration, and produced the most bony bar tissue while having softer, more permeable material properties. IA had the fastest degradation, showed high cellular infiltration, and produced the most cartilage-like tissue while having stiffer, less permeable material properties. Our results suggest that the in vivo biomaterial degradation rate is a dynamic property that can be optimized to influence cell fate and tissue repair in physeal injuries.

Dynamic mechanical loading and growth factors influence chondrogenesis of induced pluripotent mesenchymal progenitor cells in a cartilage-mimetic hydrogel.

Human induced pluripotent stem cells (iPSCs) have emerged as a promising alternative to bone-marrow derived mesenchymal stem/stromal cells for cartilage tissue engineering. However, the effect of biochemical and mechanical cues on iPSC chondrogenesis remains understudied. This study evaluated chondrogenesis of induced pluripotent mesenchymal progenitor cells (iPS-MPs) encapsulated in a cartilage-mimetic hydrogel under different culture conditions: free swelling versus dynamic compressive loading and different growth factors (TGFß3 and/or BMP2). Human iPSCs were differentiated into iPS-MPs and chondrogenesis was evaluated by gene expression (qPCR) and protein expression (immunohistochemistry) after three weeks. In pellet culture, both TGFß3 and BMP2 were required to promote chondrogenesis. However, the hydrogel in growth factor-free conditions promoted chondrogenesis, but rapidly progressed to hypertrophy. Dynamic loading in growth factor-free conditions supported chondrogenesis, but delayed the transition to hypertrophy. Findings were similar with TGFß3, BMP2, and TGFß3 + BMP2. Dynamic loading with TGFß3, regardless of BMP2, was the only condition that promoted a stable chondrogenic phenotype (aggrecan + collagen II) accompanied by collagen X down-regulation. Positive TGFßRI expression with load-enhanced Smad2/3 signaling and low SMAD1/5/8 signaling was observed. In summary, this study reports a promising cartilage-mimetic hydrogel for iPS-MPs that when combined with appropriate biochemical and mechanical cues induces a stable chondrogenic phenotype.

Rabbit Model of Physeal Injury for the Evaluation of Regenerative Medicine Approaches.

Physeal injuries can lead to bony repair tissue formation, known as a bony bar. This can result in growth arrest or angular deformity, which is devastating for children who have not yet reached their full height. Current clinical treatment involves resecting the bony bar and replacing it with a fat graft to prevent further bone formation and growth disturbance, but these treatments frequently fail to do so and require additional interventions. Novel treatments that could prevent bone formation but also regenerate the injured physeal cartilage and restore normal bone elongation are warranted. To test the efficacy of these treatments, animal models that emulate human physeal injury are necessary. The rabbit model of physeal injury quickly establishes a bony bar, which can then be resected to test new treatments. Although numerous rabbit models have been reported, they vary in terms of size and location of the injury, tools used to create the injury, and methods to assess the repair tissue, making comparisons between studies difficult. The study presented here provides a detailed method to create a rabbit model of proximal tibia physeal injury using a two-stage procedure. The first procedure involves unilateral removal of 25% of the physis in a 6-week-old New Zealand white rabbit. This consistently leads to a bony bar, significant limb length discrepancy, and angular deformity within 3 weeks. The second surgical procedure involves bony bar resection and treatment. In this study, we tested the implantation of a fat graft and a photopolymerizable hydrogel as a proof of concept that injectable materials could be delivered into this type of injury. At 8 weeks post-treatment, we measured limb length, tibial angle, and performed imaging and histology of the repair tissue. By providing a detailed, easy to reproduce methodology to perform the physeal injury and test novel treatments after bony bar resection, comparisons between studies can be made and facilitate translation of promising therapies toward clinical use. Impact Statement This study provides details to create a rabbit model of physeal injury that can facilitate comparisons between studies and test novel regenerative medicine approaches. Furthermore, this model mimics the human, clinical situation that requires a bony bar resection followed by treatment. In addition, identification of a suitable treatment can be seen in the correction of the growth deformity, allowing this model to facilitate the development of novel physeal cartilage regenerative medicine approaches.

Microgels: Modular, tunable constructs for tissue regeneration.

Biopolymer microgels are emerging as a versatile tool for aiding in the regeneration of damaged tissues due to their biocompatible nature, tunable microporous structure, ability to encapsulate bioactive factors, and tailorable properties such as stiffness and composition. These properties of microgels, along with their injectability, have allowed for their utilization in a multitude of different tissue engineering applications. Controlled release of growth factors, antibodies, and other bioactive factors from microgels have demonstrated their capabilities as transporters for essential bioactive molecules necessary for guiding tissue reconstruction. Additionally, recent in vitro studies of cellular interaction and proliferation within microgel structures have laid the initial groundwork for regenerative tissue engineering using these materials. Microgels have even been crosslinked together in various ways or 3D printed to form three-dimensional scaffolds to support cell growth. In vivo studies of microgels have pioneered the clinical relevance of these novel and innovative materials for regenerative tissue engineering. This review will cover recent developments and research of microgels as they pertain to bioactive factor release, cellular interaction and proliferation in vitro, and tissue regeneration in vivo. STATEMENT OF SIGNIFICANCE: This review is focused on state-of-the-art microgel technology and innovations within the tissue engineering field, focusing on the use of microgels in bioactive factor delivery and as cell-interactive scaffolds, both in vitro and in vivo. Microgels are hydrogel microparticles that can be tuned based on the biopolymer from which they are derived, the crosslinking chemistry used, and the fabrication method. The emergence of microgels for tissue regeneration applications in recent years illuminates their versatility and applicability in clinical settings.

Photopolymerizable Injectable Cartilage Mimetic Hydrogel for the Treatment of Focal Chondral Lesions: A Proof of Concept Study in a Rabbit Animal Model.

BACKGROUND: In this study, we investigate the in vitro and in vivo chondrogenic capacity of a novel photopolymerizable cartilage mimetic hydrogel, enhanced with extracellular matrix analogs, for cartilage regeneration. PURPOSE: To (1) determine whether mesenchymal stem cells (MSCs) embedded in a novel cartilage mimetic hydrogel support in vitro chondrogenesis, (2) demonstrate that the proposed hydrogel can be delivered in situ in a critical chondral defect in a rabbit model, and (3) determine whether the hydrogel with or without MSCs supports in vivo chondrogenesis in a critical chondral defect. STUDY DESIGN: Controlled laboratory study. METHODS: Rabbit bone marrow-derived MSCs were isolated, expanded, encapsulated in the hydrogel, and cultured in chondrogenic differentiation medium for 9 weeks. Compressive modulus was evaluated at day 1 and at weeks 3, 6, and 9. Chondrogenic differentiation was investigated via quantitative polymerase reaction, safranin-O staining, and immunofluorescence. In vivo, a 3 mm-wide × 2-mm-deep chondral defect was created bilaterally on the knee trochlea of 10 rabbits. Each animal had 1 defect randomly assigned to be treated with hydrogel with or without MSCs, and the contralateral knee was left untreated. Hence, each rabbit served as its own matched control. Three groups were established: group A, hydrogel (n = 5); group B, hydrogel with MSCs (n = 5); and group C, control (n = 10). Repair tissue was evaluated at 6 months after intervention. RESULTS: In vitro, chondrogenesis and the degradable behavior of the hydrogel by MSCs were confirmed. In vivo, the hydrogel could be delivered intraoperatively in a sterile manner. Overall, the hydrogel group had the highest scores on the modified O'Driscoll scoring system (group A, 17.4 ± 4.7; group B, 13 ± 3; group C, 16.7 ± 2.9) ( P = .11) and showed higher safranin-O staining (group A, 49.4% ± 20%; group B, 25.8% ± 16.4%; group C, 36.9% ± 25.2%) ( P = .27), although significance was not detected for either parameter. CONCLUSION: This study provides the first evidence of the ability to photopolymerize this novel hydrogel in situ and assess its ability to provide chondrogenic cues for cartilage repair in a small animal model. In vitro chondrogenesis was evident when MSCs were encapsulated in the hydrogel. CLINICAL RELEVANCE: Cartilage mimetic hydrogel may offer a tissue engineering approach for the treatment of osteochondral lesions.

Minimally Manipulated Bone Marrow Concentrate Compared with Microfracture Treatment of Full-Thickness Chondral Defects: A One-Year Study in an Equine Model.

BACKGROUND: Microfracture is commonly performed for cartilage repair but usually results in fibrocartilage. Microfracture augmented by autologous bone marrow concentrate (BMC) was previously shown to yield structurally superior cartilage repairs in an equine model compared with microfracture alone. The current study was performed to test the hypothesis that autologous BMC without concomitant microfracture improves cartilage repair compared with microfracture alone. METHODS: Autologous sternal bone marrow aspirate (BMA) was concentrated using a commercial system. Cells from BMC were evaluated for chondrogenic potential in vitro and in vivo. Bilateral full-thickness chondral defects (15-mm diameter) were created on the midlateral trochlear ridge in 8 horses. Paired defects were randomly assigned to treatment with BMC without concomitant microfracture, or to microfracture alone. The repairs were evaluated at 1 year by in vitro assessment, arthroscopy, morphological magnetic resonance imaging (MRI), quantitative T2-weighted and ultrashort echo time enhanced T2* (UTE-T2*) MRI mapping, and histological assessment. RESULTS: Culture-expanded but not freshly isolated cells from BMA and BMC underwent cartilage differentiation in vitro. In vivo, cartilage repairs in both groups were fibrous to fibrocartilaginous at 1 year of follow-up, with no differences observed between BMC and microfracture by arthroscopy, T2 and UTE-T2* MRI values, and histological assessment (p > 0.05). Morphological MRI showed subchondral bone changes not observed by arthroscopy and improved overall outcomes for the BMC repairs (p = 0.03). Differences in repair tissue UTE-T2* texture features were observed between the treatment groups (p < 0.05). CONCLUSIONS: When BMC was applied directly to critical-sized, full-thickness chondral defects in an equine model, the cartilage repair results were similar to those of microfracture. Our data suggest that, given the few mesenchymal stem cells in minimally manipulated BMC, other mechanisms such as paracrine, anti-inflammatory, or immunomodulatory effects may have been responsible for tissue regeneration in a previous study in which BMC was applied to microfractured repairs. While our conclusions are limited by small numbers, the better MRI outcomes for the BMC repairs may have been related to reduced surgical trauma to the subchondral bone. CLINICAL RELEVANCE: MRI provides important information on chondral defect subsurface repair organization and subchondral bone structure that is not well assessed by arthroscopy.

Regenerative Medicine Approaches for the Treatment of Pediatric Physeal Injuries.

The physis, or growth plate, is a cartilaginous region at the end of children's long bones that serves as the primary center for longitudinal growth and characterizes the immature skeleton. Musculoskeletal injury, including fracture, infection, malignancy, or iatrogenic damage, has risk of physeal damage. Physeal injuries account for 30% of pediatric fractures and may result in impaired bone growth. Once damaged, cartilage tissue within the physis is often replaced by unwanted bony tissue, forming a "bony bar" that can lead to complications such as complete growth arrest, angular or rotational deformities, and altered joint mechanics. Children with a bony bar occupying <50% of the physis usually undergo bony bar resection and insertion of an interpositional material, such as a fat graft, to prevent recurrence and allow the surrounding uninjured physeal tissue to restore longitudinal bone growth. Clinical success for this procedure is <35% and often the bony bar and associated growth impairments return. Children who are not candidates for bony bar resection due to a physeal bar occupying >50% of their physis undergo corrective osteotomy or bone lengthening procedures. These approaches are complex and have variable success rates. As such, there is a critical need for regenerative approaches to not only prevent initial bony bar formation but also regenerate healthy physeal cartilage following injury. This review describes physeal anatomy, mechanisms of physeal injury, and current treatment options with associated limitations. Furthermore, we provide an overview of the current research using cell-based therapies, growth factors, and biomaterials in the different animal models of injury along with strategic directions for modulating intrinsic injury pathways to inhibit bony bar formation and/or promote physeal tissue formation. Pediatric physeal injuries constitute a unique niche within regenerative medicine for which there is a critical need for research to decrease child morbidity related to this injurious process.

Current and novel injectable hydrogels to treat focal chondral lesions: Properties and applicability.

Focal chondral lesions and early osteoarthritis (OA) are responsible for progressive joint pain and disability in millions of people worldwide, yet there is currently no surgical joint preservation treatment available to fully restore the long term functionality of cartilage. Limitations of current treatments for cartilage defects have prompted the field of cartilage tissue engineering, which seeks to integrate engineering and biological principles to promote the growth of new cartilage to replace damaged tissue. Toward improving cartilage repair, hydrogel design has advanced in recent years to improve their utility. Injectable hydrogels have emerged as a promising scaffold due to their wide range of properties, the ability to encapsulate cells within the material, and their ability to provide cues for cell differentiation. Some of these advances include the development of improved control over in situ gelation (e.g., light), new techniques to process hydrogels (e.g., multi-layers), and better incorporation of biological signals (e.g., immobilization, controlled release, and tethering). This review summarises the innovative approaches to engineer injectable hydrogels toward cartilage repair. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:64-75, 2018.

Viability and Tissue Quality of Cartilage Flaps From Patients With Femoroacetabular Hip Impingement: A Matched-Control Comparison.

BACKGROUND: Chondrolabral damage is commonly observed in patients with cam-type femoroacetabular impingement (FAI). Chondral flap reattachment has recently been proposed as a possible preservation technique. PURPOSE/HYPOTHESIS: The purpose of this study was to determine the viability and tissue quality of chondral flaps from patients with FAI at the time of arthroscopy. It was hypothesized that chondral flaps from patients with cam lesions of the hip would exhibit less viability and greater tissue degeneration than would those of a matched control group. STUDY DESIGN: Cohort study; Level of evidence, 2. METHODS: Patients with cam-type FAI who were treated with hip arthroscopy between 2014 and 2016 were asked to participate in this study. The cartilage lesions were localized and classified intraoperatively according to Beck classification. A chondral flap (study group) and a cartilage sample (control group) were obtained from each patient for histologic evaluation. Cellular viability and tissue quality were examined and compared in both groups. Cellular viability was determined with live/dead staining, and tissue quality was evaluated using safranin O/fast green, hematoxylin and eosin (H&E) staining, and immunohistochemistry for collagen II. Osteoarthritis Research Society International (OARSI) grading was used for quality assessment, and Image J software was used to calculate the percentage of tissue viability and Col II stain. RESULTS: A total of 10 male patients with a mean age of 38.4 years (range, 30-55 years) were enrolled. All chondral flaps were classified as Beck grade 4. The mean cellular viability of the chondral flaps was reduced (54.6% ± 25.6%), and they were found to be degenerated (OARSI grade, 4 ± 1.27). Control samples also had reduced viability (38.8% ± 30.3%) and were degenerative (OARSI grade, 3.5 ± 1.38). There was no statistically significant intergroup difference for viability (P = .203) or OARSI grade (P = .645), nor was there an intragroup correlation between viability and OARSI grade (P > .05). A significant negative correlation (r = -0.9, P = .035) was found between OARSI grade and collagen II percentage scale in 5 selected samples. CONCLUSION: Despite appearing normal macroscopically, the chondral flaps from patients with cam-type FAI displayed loss of viability and tissue degeneration. In addition, control samples obtained away from the injury area also displayed cartilage damage and degeneration. Careful consideration should be taken when attempting to reattach the chondral flap.