GC-MS AND Chemometric Analysis of the Essential Oils Obtained from Mexican Commercial Chamomilla Recutita Teas.

The essential oils prepared by hydrodistillation of twenty-one brands of German chamomile (S1-S21) commercialized in Mexico were analyzed by GS-MS. Altogether, twenty-four different compounds were identified in the analyzed samples, varying from 77 to 100 % of the total composition. Multivariate analyses were applied to explore similarity/dissimilarity and correlation between all samples; the results revealed a strong correlation among samples S4, S5, and S7-S21 due to the presence of (Z)-en-yn-dicycloether [(Z)-tonghaosu], α-bisabolol, ß-farnesene, ß-eudesmol, and xanthoxylin. The samples S1-S3 and S6 were clustered separately. Samples S1, S3, and S6 were characterized by their higher content of bisabolol oxide A (38.78 %, 51.84 %, and 70.46 %, respectively) as most known chemotypes of German chamomile, but only S1 and S3 contained chamazulene. Finally, S2 differed from the others because of its high content of (E)-anethole (62.28 %), suggesting a case of adulteration or substitution of the crude drug employed for manufacturing the product.

Magnetic Solid-Phase Extraction Based on Poly 4-Vinyl Pyridine for HPLC-FLD Analysis of Naproxen in Urine Samples.

A magnetic solid phase extraction technique followed by liquid chromatography with a fluorescence detector for naproxen analysis in human urine samples was developed. The method includes the extraction of naproxen with a magnetic solid synthetized with magnetite and poly 4-vinylpriridine, followed by the magnetic separation of the solid phase and desorption of the analyte with methanol. Under optimal conditions, the linear range of the calibration curve was 0.05-0.60 µg L-1, with a limit of detection of 0.02 µg L-1. In all cases values of repeatability were lower than 5.0% with recoveries of 99.4 ± 1.3%. Precision and accuracy values are adequate for naproxen (Npx) analysis in urine samples.

Trace analysis of UV filters and musks in living fish by in vivo SPME-GC-MS.

A method was developed for the simultaneous determination of two groups of personal care products, namely UV filters (oxybenzone, 3-(4-methylbenzylidene)camphor, padimate-O, 2-ethylhexyl-4-methoxycinnamate, and octocrylene) and polycyclic aromatic musks (galaxolide and tonalide), in fish by in vivo solid-phase microextraction followed by gas chromatography-mass spectrometry. The in vivo method was validated by carrying out in vitro experiments; the method validation parameters were linearity (r2 > 0.98), interday precision (relative standard deviations < 35.50%), limits of detection and quantification ranging from 2 to 25 ng g-1 and 5 to 70 ng g-1, respectively. The calibrations in vivo and in vitro were determined using a pre-equilibrium sampling rate calibration method. In vivo sampling rate (Rs) was greater than that in vitro; therefore in vivo Rs was applied to the uptake and elimination tracing under controlled laboratory conditions to avoid quantitation error. All analytes were bioaccumulated in muscle tissue over the 5-day exposure in different grades depending on their molecular structure and physicochemical properties; the most absorbed compound was tonalide and the least absorbed compound was padimate-O. The elimination rate was initially high with a rapid decrease of the analyte concentrations for the first 24 h; thereafter, the rate of elimination tended to decrease which indicated that the target analytes were bioaccumulated. To our knowledge, this is the first time that UV filters have been analyzed with in vivo SPME-GC-MS. The proposed method is a simple, miniaturized, and non-lethal alternative for the determination of personal care products in living organisms. Graphical abstract.

Simple method for the determination of personal care product ingredients in lettuce by ultrasound-assisted extraction combined with solid-phase microextraction followed by GC-MS.

A simple method for the simultaneous determination of personal care product ingredients: galaxolide, tonalide, oxybenzone, 4-methylbenzyliden camphor, padimate-o, 2-ethylhexyl methoxycinnamate, octocrylene, triclosan, and methyl triclosan in lettuce by ultrasound-assisted extraction combined with solid-phase microextraction followed by gas chromatography with mass spectrometry was developed. Lettuce was directly extracted by ultrasound-assisted extraction with methanol, this extract was combined with water, extracted by solid-phase microextraction in immersion mode, and analyzed by gas chromatography with mass spectrometry. Good linear relationships (25-250 ng/g, R2  > 0.9702) and low detection limits (1.0-25 ng/g) were obtained for analytes along with acceptable precision for almost all analytes (RSDs < 20%). The validated method was applied for the determination of personal care product ingredients in commercial lettuce and lettuces grown in soil and irrigated with the analytes, identifying the target analytes in leaves and roots of the latter. This procedure is a miniaturized and environmentally friendly proposal which can be a useful tool for quality analysis in lettuce.

A Simple Method for the Simultaneous Determination of Pharmaceuticals and Personal Care Products in River Sediment by Ultrasound-Assisted Extraction Followed by Solid-Phase Microextraction Coupled with Gas Chromatography-Mass Spectrometry.

A simple method was developed using ultrasound-assisted extraction (UAE) combined with solid-phase microextraction (SPME) coupled with gas chromatography-mass spectrometry (GC-MS) for the simultaneous determination of eight different pharmaceuticals and personal care products (PPCPs) (ibuprofen, 2-benzyl-4-chlorophenol, naproxen, triclosan, ketoprofen, diclofenac, bisphenol A and estrone) in river sediment. UAE conditions were optimized involving extraction variables such as extraction solvent, extraction time, sample amount, extraction temperature, pH and salt addition. A 100 mg of sediment was extracted by optimized UAE process using 7 mL deionized water (pH 3) + 1% methanol as solvent, room temperature and 1 min extraction at 70% of amplitude. A 5 mL of supernatant was subsequently extracted by SPME; the extracted analytes were derivatized on fiber in head-space mode with N-methyl-N-(tertbutyldimethylsilyl) trifluoroacetamide and then analyzed by GC-MS. The developed method was evaluated by testing: precision (CV < 8%), linearity (R  > 0.98), recoveries (56-108%), limits of detection (<0.25 ng/g) and quantitation (<0.8 ng/g). Finally, the method was successfully applied to sediment samples collected from Tula River, Hidalgo, Mexico (one of the most polluted river) in which naproxen and triclosan were identified at ng/g concentration levels. Quantitative results were compared with Tula River water samples, showing PPCPs distribution rate between water and sediment. The method is robust, simple and environmentally friendly, and provides straightforward analyses of these trace organic pollutants in sediment samples.

Capabilities and limitations of dispersive liquid-liquid microextraction with solidification of floating organic drop for the extraction of organic pollutants from water samples.

Dispersive liquid-liquid microextraction with solidification of floating organic drop (DLLME-SFO) is one of the most interesting sample preparation techniques developed in recent years. Although several applications have been reported, the potentiality and limitations of this simple and rapid extraction technique have not been made sufficiently explicit. In this work, the extraction efficiency of DLLME-SFO for pollutants from different chemical families was determined. Studied compounds include: 10 polycyclic aromatic hydrocarbons, 5 pesticides (chlorophenoxy herbicides and DDT), 8 phenols and 6 sulfonamides, thus, covering a large range of polarity and hydrophobicity (LogKow 0-7, overall). After optimization of extraction conditions using 1-dodecanol as extractant, the procedure was applied for extraction of each family from 10-mL spiked water samples, only adjusting sample pH as required. Absolute recoveries for pollutants with LogKow 3-7 were >70% and recovery values within this group (18 compounds) were independent of structure or hydrophobicity; the precision of recovery was very acceptable (RSD<12%) and linear behavior was observed in the studied concentration range (r(2)>0.995). Extraction recoveries for pollutants with LogKow 1.46-2.8 were in the range 13-62%, directly depending on individual LogKow values; however, good linearity (r(2)>0.993) and precision (RSD<6.5%) were also demonstrated for these polar solutes, despite recovery level. DLLME-SFO with 1-dodecanol completely failed for extraction of compounds with LogKow≤1 (sulfa drugs), other more polar extraction solvents (ionic liquids) should be explored for highly hydrophilic pollutants.

Enzymatic hydrolysis of fructans in the tequila production process.

In contrast to the hydrolysis of reserve carbohydrates in most plant-derived alcoholic beverage processes carried out with enzymes, agave fructans in tequila production have traditionally been transformed to fermentable sugars through acid thermal hydrolysis. Experiments at the bench scale demonstrated that the extraction and hydrolysis of agave fructans can be carried out continuously using commercial inulinases in a countercurrent extraction process with shredded agave fibers. Difficulties in the temperature control of large extraction diffusers did not allow the scaling up of this procedure. Nevertheless, batch enzymatic hydrolysis of agave extracts obtained in diffusers operating at 60 and 90 degrees C was studied at the laboratory and industrial levels. The effects of the enzymatic process on some tequila congeners were studied, demonstrating that although a short thermal treatment is essential for the development of tequila's organoleptic characteristics, the fructan hydrolysis can be performed with enzymes without major modifications in the flavor or aroma, as determined by a plant sensory panel and corroborated by the analysis of tequila congeners.

Characterization of five typical agave plants used to produce mezcal through their simple lipid composition analysis by gas chromatography.

Five agave plants typically used in Mexico for making mezcal in places included in the Denomination of Origin (Mexican federal law that establishes the territory within which mezcal can be produced) of this spirit were analyzed: Agave salmiana ssp. crassispina, A. salmiana var. salmiana, Agave angustifolia, Agave cupreata, and Agave karwinskii. Fatty acid and total simple lipid profiles of the mature heads of each plant were determined by means of a modified Bligh-Dyer extraction and gas chromatography. Sixteen fatty acids were identified, from capric to lignoceric, ranging from 0.40 to 459 microg/g of agave. Identified lipids include free fatty acids, beta-sitosterol, and groups of mono-, di-, and triacylglycerols, their total concentration ranging from 459 to 992 microg/g of agave. Multivariate analyses performed on the fatty acid profiles showed a close similarity between A. cupreata and A. angustifolia. This fact can be ascribed to the taxa themselves or differences in growing conditions, an issue that is still to be explored. These results help to characterize the agaves chemically and can serve to relate the composition of mezcals from various states of Mexico with the corresponding raw material.

Analysis of capsaicin and dihydrocapsaicin in peppers and pepper sauces by solid phase microextraction-gas chromatography-mass spectrometry.

A simple method for the analysis of capsaicin and dihydrocapsaicin in peppers and pepper sauces by solid phase microextraction-gas chromatography-mass spectrometry has been developed. A novel device was designed for direct extraction solid phase microextraction in order to avoid damage to the fiber. The analysis was performed without derivatization for the gas chromatography-mass spectrometry analysis. Selection fiber, extraction temperature, extraction time and pH, were optimized. The method was linear in the range 0.109-1.323 microg/mL for capsaicin and 0.107-1.713 microg/mL for dihydrocapsaicin with correlation coefficient up to r=0.9970 for both capsaicinoids. The precision of the method was less than 10%. The method was applied to the analysis of 11 varieties of peppers and four pepper sauces. A broad range of capsaicin (55.0-25 459 microg/g) and dihydrocapsaicin (93-1 130 microg/g) was found in the pepper and pepper sauces samples (4.3-717.3 and 1.0-134.8 microg/g), respectively.

Binding characteristics of bovine serum albumin encapsulated in sol-gel glasses: an alternative for protein interaction studies.

Silica glasses doped with 500-700 microg of bovine serum albumin were prepared by the sol-gel method; two pH conditions (pH 5 and 7) were assayed for protein encapsulation. Both biomaterials showed a highly porous structure, with pore sizes in the range 5-28 nm. Columns packed with the ground biogels were on-line coupled to a C18 HPLC column for evaluation of the entrapped protein binding properties using propranolol. Binding capacities (at saturation) were approximately 3.7 and 7.1 microg of propranolol (drug-protein molar ratios 1.4 and 2.7) for the biogels prepared at pH 5 and 7, respectively. The significant difference indicates increased albumin denaturation upon encapsulation at pH 5. A frontal analysis study was then performed in cartridges packed with biogel prepared at pH 7 to evaluate the protein interaction with naproxen at low concentrations (

Determination of terpenes in tequila by solid phase microextraction-gas chromatography-mass spectrometry.

Solid phase microextraction and capillary gas chromatography-mass spectrometry were used for the determination of seven terpenes in tequila. The method was selected based on the following parameters: coating selection (PA, PDMS, CW/DVB, and PDMS/DVB), extraction temperature, addition of salt, and extraction time profile. The extraction conditions were: PDMS/DVB fiber, Headspace, 100% NaCl, 25 degrees C extraction temperature, 30 min extraction time and stirring at 1200 rpm. The calibration curves (50-1000 ng/ml) for the terpenes followed linear relationships with correlation coefficients (r) greater than 0.99, except for trans,trans-farnesol (r = 0.98). RSD values were smaller than 10% confirmed that the technique was precise. Samples from 18 different trade brands of "Aged" tequila analyzed with the developed method showed the same terpenes in different concentrations. The analytical procedure used is selective, robust (more than 100 analyses with the same fiber), fast and of low-cost.

Characterization of three agave species by gas chromatography and solid-phase microextraction-gas chromatography-mass spectrometry.

Steam distillation (SD) extraction-solid-phase microextraction coupled to GC-MS was developed for the determination of terpenes and Bligh-Dyer extraction-derivatization coupled with GC for the determination of fatty acids such as ethyl esters were used. It was found that the three different Agave species have the same profile of fatty acids; the quantity of these compounds is different in each Agave variety. On the other hand, different terpenes were identified in the three Agave plants studied: nine in A. salmiana, eight in A. angustifolia and 32 in A. tequilana Weber var. azul.