An algorithm to estimate aircraft cruise black carbon emissions for use in developing a cruise emissions inventory.

UNLABELLED: To provide accurate input parameters to the large-scale global climate simulation models, an algorithm was developed to estimate the black carbon (BC) mass emission index for engines in the commercial fleet at cruise. Using a high-dimensional model representation (HDMR) global sensitivity analysis, relevant engine specification/operation parameters were ranked, and the most important parameters were selected. Simple algebraic formulas were then constructed based on those important parameters. The algorithm takes the cruise power (alternatively, fuel flow rate), altitude, and Mach number as inputs, and calculates BC emission index for a given engine/airframe combination using the engine property parameters, such as the smoke number, available in the International Civil Aviation Organization (ICAO) engine certification databank. The algorithm can be interfaced with state-of-the-art aircraft emissions inventory development tools, and will greatly improve the global climate simulations that currently use a single fleet average value for all airplanes. IMPLICATIONS: An algorithm to estimate the cruise condition black carbon emission index for commercial aircraft engines was developed. Using the ICAO certification data, the algorithm can evaluate the black carbon emission at given cruise altitude and speed.

Measurement of naphthalene uptake by combustion soot particles.

In this study, we designed and constructed an experimental laboratory apparatus to measure the uptake of volatile organic compounds (VOCs) by soot particles. Results for the uptake of naphthalene (C10H8) by soot particles typical of those found in the exhaust of an aircraft engine are reported in this paper. The naphthalene concentration in the gas phase and naphthalene attached to the particles were measured simultaneously by a heated flame ionization detector (HFID) and a time-of-flight aerosol mass spectrometer (ToF AMS), respectively. The uptake coefficient for naphthalene on soot of (1.11 ± 0.06) × 10(-5) at 293 K was determined by fitting the HFID and AMS measurements of gaseous and particulate naphthalene to a kinetic model of uptake. When the gaseous concentration of naphthalene is kept below the saturation limit during these experiments, the uptake of naphthalene can be considered the dry mass accommodation coefficient.