Data derived extrapolation factors (DDEFs) for rat to human interspecies extrapolation for the HPPD inhibitor mesotrione.

In the risk assessment of agrochemicals, there has been a historical paucity of using data to refine the default adjustment factors, even though large datasets are available to support this. The current state of the science for addressing uncertainty regarding animal to human extrapolation (AFA) is to develop a "data-derived" adjustment factor (DDEF) to quantify such differences, if data are available. Toxicokinetic (TK) and toxicodynamic (TD) differences between species can be utilized for the DDEF, with human datasets being ideal yet rare. We identified a case for a currently registered herbicide, mesotrione, in which human TK and TD are available. This case study outlines an approach for the development of DDEFs using comparative human and animal data and based on an adverse outcome pathway (AOP) for inhibition of 4-hydroxyphenol pyruvate dioxygenase (HHPD). The calculated DDEF for rat to human extrapolation (AFA) for kinetics (AFAK = 2.5) was multiplied by the AFA for dynamics (AFAD = 0.3) resulting in a composite DDEF of ∼1 (AFA = 0.75). This reflects the AOP and available scientific evidence that humans are less sensitive than rats to the effects of HPPD inhibitors. Further analyses were conducted utilizing in vitro datasets from hepatocytes and liver cytosols and extrapolated to whole animal using in vitro to in vivo extrapolation (IVIVE) to support toxicodynamic extrapolation. The in vitro datasets resulted in the same AFAD as derived for in vivo data (AFAD = 0.3). These analyses demonstrate that a majority of the species differences are related to toxicodynamics. Future work with additional in vitro/in vivo datasets for other HPPD inhibitors and cell types will further support this result. This work demonstrates utilization of all available toxicokinetic and toxicodynamic data to replace default uncertainty factors for agrochemical human health risk assessment.

The Long Goodbye: Finally Moving on from the Relative Potency Approach to a Mixtures Approach for Polycyclic Aromatic Hydrocarbons (PAHs).

For the past several decades, a relative potency approach has been used to estimate the human health risks from exposure to polycyclic aromatic hydrocarbon (PAH) mixtures. Risk estimates are derived using potency equivalence factors (PEFs; also called relative potency factors [RPFs]), based on the ratio of selected PAHs to benzo[a]pyrene (BaP), expressed qualitatively by orders of magnitude. To quantify PEFs for 18 selected carcinogenic PAHs, a systematic approach with a priori and dose response criteria was developed, building on draft work by the US EPA in 2010 and its review by US EPA Science Advisory Board (SAB) in 2011. An exhaustive search for carcinogenicity studies that included both target PAHs and BaP with environmentally relevant exposure routes found only 48 animal bioassay datasets (mostly pre-1992 based on skin painting). Only eight datasets provided adequate low-response data, and of these only four datasets were appropriate for modeling to estimate PEFs; only benzo[b]fluoranthene and cyclopenta[c,d]pyrene had a PEF that could be quantified. Thus, current knowledge of PAH carcinogenicity is insufficient to support quantitative PEFs for PAH mixtures. This highlights the long-acknowledged need for an interdisciplinary approach to estimate risks from PAH mixtures. Use of alternative and short-term toxicity testing methods, improved mixture characterization, understanding the fate and bioavailability of PAH mixtures, and understanding exposure route-related differences in carcinogenicity are discussed as ways to improve the understanding of the risks of PAHs.

Exposure to perfluorooctanoic acid (PFOA) decreases neutrophil migration response to injury in zebrafish embryos.

OBJECTIVE: Perfluorooctanoic acid (PFOA) is a ubiquitous environmental contaminant and a known immune suppressant in humans and experimental animal models. Studies on PFOA have focused on suppression of the adaptive immune response; however, little is known of the impact on innate immunity, especially during embryogenesis. Therefore, we utilized the zebrafish chemotaxis assay coupled with in situ hybridization for myeloperoxidase expression to determine the effects of PFOA exposure on neutrophil migration in the developing zebrafish embryo. Zebrafish embryos are a well-established in vivo model that exhibit high homology with the development of human innate immunity. RESULTS: Treatment of zebrafish with increasing concentrations of PFOA identified the lethal concentration in 50% of the embryos (LC50) to be 300 mg/L. Utilizing the zebrafish chemotaxis assay, this study showed that wounding induced significant neutrophil migration to the site of injury, and that neutrophil number in the wound region was significantly reduced in response to 48-h PFOA exposure (well below doses causing acute mortality). This study demonstrates that the developing embryo is sensitive to PFOA exposure and that PFOA can modify the innate immune system during embryonic development. These results lay the groundwork for future investigation on the mechanisms underlying PFOA-induced developmental immunotoxicity.

Summary of historical terrestrial toxicity data for the brominated flame retardant tetrabromobisphenol A (TBBPA): effects on soil microorganisms, earthworms, and seedling emergence.

This article summarizes historical and recent research on the terrestrial toxicology of tetrabromobisphenol A (TBBPA). Despite its ubiquitous use and presence in the environment, little published data is available to evaluate the terrestrial ecotoxicity of TBBPA. The purposes of this paper are to enable broad access to a series of TBBPA ecotoxicity tests (nitrogen transformation, earthworm survival/reproduction, and seedling emergence/growth) that were conducted in support of regulatory risk assessments, and to summarize available research in the terrestrial toxicity of TBBPA. In these studies, no significant effect of TBBPA on nitrogen transformation was observed up to the highest concentration [1000 mg/kg dry weight (d.w.) soil]. The no-observed-effect concentrations (NOECs) for seedling emergence ranged from 20 to 5000 mg/kg d.w. Sensitivities were soybeans < corn ≈ onion ≈ tomato < ryegrass < cucumber; the most sensitive endpoints being seedling dry weight and height. The 28-day earthworm mortality NOEC was > 4840 mg/kg d.w. The most sensitive terrestrial endpoint was earthworm reproduction with a half maximal effective concentration (EC50) of 0.12 mg/kg d.w. soil. Based on this sensitive terrestrial endpoint, the EU derived a predicted no-effect concentration (PNEC) for soil of 0.012 mg/kg wet weight soil (EU 2008). We did not identify a more sensitive/lower point of departure for terrestrial toxicity endpoints in the published literature. On the basis of this PNEC, the EU concluded there was potential risk for environmental effects near TBBPA manufacturing sites, but no additional risk provided that no sewage sludge was applied to agricultural land (EU 2008).

Review of historical aquatic toxicity and bioconcentration data for the brominated flame retardant tetrabromobisphenol A (TBBPA): effects to fish, invertebrates, algae, and microbial communities.

This paper summarizes the historical and recent research on the aquatic toxicology and bioconcentration potential of tetrabromobisphenol A (TBBPA), a major flame retardant in electronics. Historical studies on TBBPA are presented in detail, and are compared with more recent research. The historical studies have not been published to date, though they were pivotal in regulatory assessments by the European Union, Canada, and the USA. These assessments have enabled the use of TBBPA as a flame retardant in electronic applications, to the present. The studies were conducted under a Test Rule by the US Environmental Protection Agency in 1987, and were sponsored by member companies of the North American Flame Retardants Alliance (NAFRA) through the American Chemistry Council. The studies were conducted under Good Laboratory Practice procedures, and include 6 acute toxicity tests of TBBPA with fish, invertebrates, algae, and microbes, eight chronic tests, and three bioconcentration studies with fish and invertebrates. Methods and empirical data for each study are detailed in an electronic supplement. Results of the NAFRA studies are compared with recent findings on TBBPA toxicity. Molluscan shell growth may be uniquely sensitive to TBBPA, more sensitive than chronic fish or crustacean toxicity endpoints. Several of the NAFRA studies and several independent studies have reported toxicities exceeding the empirical water solubility limits of TBBPA (in the range of 2.0 mg/L depending on pH). The validity of these results is discussed.

Derivation of a no-significant-risk-level for tetrabromobisphenol A based on a threshold non-mutagenic cancer mode of action.

A no-significant-risk-level of 20 mg day-1 was derived for tetrabromobisphenol A (TBBPA). Uterine tumors (adenomas, adenocarcinomas, and malignant mixed Müllerian) observed in female Wistar Han rats from a National Toxicology Program 2-year cancer bioassay were identified as the critical effect. Studies suggest that TBBPA is acting through a non-mutagenic mode of action. Thus, the most appropriate approach to derivation of a cancer risk value based on US Environmental Protection Agency guidelines is a threshold approach, akin to a cancer safe dose (RfDcancer ). Using the National Toxicology Program data, we utilized Benchmark dose software to derive a benchmark dose lower limit (BMDL10 ) as the point of departure (POD) of 103 mg kg-1  day-1 . The POD was adjusted to a human equivalent dose of 25.6 mg kg-1  day-1 using allometric scaling. We applied a composite adjustment factor of 100 to the POD to derive an RfDcancer of 0.26 mg kg-1  day-1 . Based on a human body weight of 70 kg, the RfDcancer was adjusted to a no-significant-risk-level of 20 mg day-1 . This was compared to other available non-cancer and cancer risk values, and aligns well with our understanding of the underlying biology based on the toxicology data. Overall, the weight of evidence from animal studies indicates that TBBPA has low toxicity and suggests that high doses over long exposure durations are needed to induce uterine tumor formation. Future research needs include a thorough and detailed vetting of the proposed adverse outcome pathway, including further support for key events leading to uterine tumor formation and a quantitative weight of evidence analysis.

A harmonization effort for acceptable daily exposure application to pharmaceutical manufacturing - Operational considerations.

A European Union (EU) regulatory guideline came into effect for all new pharmaceutical products on June 1st, 2015, and for all existing pharmaceutical products on December 1st, 2015. This guideline centers around the use of the Acceptable Daily Exposure (ADE) [synonymous with the Permitted Daily Exposure (PDE)] and operational considerations associated with implementation are outlined here. The EU guidance states that all active pharmaceutical ingredients (API) require an ADE; however, other substances such as starting materials, process intermediates, and cleaning agents may benefit from an ADE. Problems in setting ADEs for these additional substances typically relate to toxicological data limitations precluding the ability to establish a formal ADE. Established methodologies such as occupational exposure limits or bands (OELs or OEBs) and the threshold of toxicological concern (TTC) can be used or adjusted for use as interim ADEs when only limited data are available and until a more formal ADE can be established. Once formal ADEs are derived, it is important that the documents are routinely updated and that these updates are communicated to appropriate stakeholders. Another key operational consideration related to data-poor substances includes the use of maximum daily dose (MDD) in setting cross-contamination limits. The MDD is an important part of the maximum allowable/safe concentration (MAC/MSC) calculation and there are important considerations for its use and definition. Finally, other considerations discussed include operational aspects of setting ADEs for pediatrics, considerations for large molecules, and risk management in shared facilities.

Issues and approaches for ensuring effective communication on acceptable daily exposure (ADE) values applied to pharmaceutical cleaning.

This manuscript centers on communication with key stakeholders of the concepts and program goals involved in the application of health-based pharmaceutical cleaning limits. Implementation of health-based cleaning limits, as distinct from other standards such as 1/1000th of the lowest clinical dose, is a concept recently introduced into regulatory domains. While there is a great deal of technical detail in the written framework underpinning the use of Acceptable Daily Exposures (ADEs) in cleaning (for example ISPE, 2010; Sargent et al., 2013), little is available to explain how to practically create a program which meets regulatory needs while also fulfilling good manufacturing practice (GMP) and other expectations. The lack of a harmonized approach for program implementation and communication across stakeholders can ultimately foster inappropriate application of these concepts. Thus, this period in time (2014-2017) could be considered transitional with respect to influencing best practice related to establishing health-based cleaning limits. Suggestions offered in this manuscript are intended to encourage full and accurate communication regarding both scientific and administrative elements of health-based ADE values used in pharmaceutical cleaning practice. This is a large and complex effort that requires: 1) clearly explaining key terms and definitions, 2) identification of stakeholders, 3) assessment of stakeholders' subject matter knowledge, 4) formulation of key messages fit to stakeholder needs, 5) identification of effective and timely means for communication, and 6) allocation of time, energy, and motivation for initiating and carrying through with communications.

Using default methodologies to derive an acceptable daily exposure (ADE).

This manuscript discusses the different historical and more recent default approaches that have been used to derive an acceptable daily exposure (ADE). While it is preferable to derive a health-based ADE based on a complete nonclinical and clinical data package, this is not always possible. For instance, for drug candidates in early development there may be no or limited nonclinical or clinical trial data. Alternative approaches that can support decision making with less complete data packages represent a variety of methods that rely on default assumptions or data inputs where chemical-specific data on health effects are lacking. A variety of default approaches are used including those based on certain toxicity estimates, a fraction of the therapeutic dose, cleaning-based limits, the threshold of toxicological concern (TTC), and application of hazard banding tools such as occupational exposure banding (OEB). Each of these default approaches is discussed in this manuscript, including their derivation, application, strengths, and limitations. In order to ensure patient safety when faced with toxicological and clinical data-gaps, default ADE methods should be purposefully as or more protective than ADEs derived from full data packages. Reliance on the subset of default approaches (e.g., TTC or OEB) that are based on toxicological data is preferred over other methods for establishing ADEs in early development while toxicology and clinical data are still being collected.

Toxicokinetic and toxicodynamic considerations when deriving health-based exposure limits for pharmaceuticals.

The purpose of this paper is to describe the use of toxicokinetic (TK) and toxicodynamic (TD) data in setting acceptable daily exposure (ADE) values and occupational exposure limits (OELs). Use of TK data can provide a more robust exposure limit based on a rigorous evaluation of systemic internal dose. Bioavailability data assist in extrapolating across different routes of exposure to be protective for route-based differences of exposure. Bioaccumulation data enable extrapolation to chronic exposures when the point of departure (PoD) is from a short-term critical study. Applied in the context of chemical-specific adjustment factors (CSAFs), TK data partially replace traditional default adjustment factors for interspecies extrapolation (extrapolation from studies conducted in animals to humans) and intraspecies variability (to account for human population variability). Default adjustments of 10-fold each for interspecies and intraspecies extrapolation are recommended in several guidelines, although some organization recommend other values. Such default factors may overestimate variability for many APIs, while not being sufficiently protective for variability with other APIs. For this reason, the use of chemical specific TK and TD data are preferred. Making full use of existing TK and TD data reduces underlying uncertainties, increases transparency, and ensures that resulting ADEs reflect the best available science.