A Comparison of Preparation Times between Manual, Rotary, and Reciprocating Files in Primary Molar Pulpectomy.

AIM: To compare preparation times using manual, rotary, and reciprocating files during pulpectomy treatment of primary molars. SETTINGS AND DESIGN: This study was an in vitro, randomised, cross-sectional study. METHODS: The study was performed on 60 extracted human primary mandibular second molars. Only mesiobuccal canals were prepared using one of three preparation techniques; each preparation technique group comprised 20 canals. Canal preparations were performed by a single, skilled operator using stainless-steel (ss) K-files (ISO size 20-35), a ProTaper Gold SX file, and a WaveOne Gold Medium file following glide path preparation. Preparation times were recorded in second (s) with a digital stopwatch. STATISTICAL ANALYSIS: Preparation times were compared using analysis of variance and the Kruskal-Wallis analysis of variance, where appropriate. The level of significance was set at P ≤ 0.05. RESULTS: The mean preparation time using the ss K-files was significantly longer (186.4 s) than when using the ProTaper Gold SX (29.6 s) or WaveOne Gold Medium files (30.5 s) (P < 0.001). Similar preparation times were recorded when using the ProTaper Gold SX and WaveOne Gold Medium files (P = 0.939). CONCLUSION: Preparation times with the ProTaper Gold SX and WaveOne Gold Medium files were significantly faster than when using the ss K-files to prepare primary tooth root canals for pulpectomy. Similar preparation times were noted when using the rotary and reciprocation instrumentation groups (P > 0.05).

A micro-computed tomographic evaluation of maxillary first molar root canal morphology in Black South Africans.

PURPOSE: This study was conducted to investigate the root canal anatomy of maxillary first molars in Black South Africans. METHODS: Micro-computed tomography was used to investigate 101 maxillary first molars (53 teeth from the right, 48 from the left; 50 male and 51 female teeth). The number of root canals in each tooth was determined, and the relationship between side, sex and age was analyzed using chi-squared test. To determine intra- and inter-observer reliability, Cohen's kappa coefficients were calculated. RESULTS: Intra- and inter-rater agreements of 96.92% and 98.08% were achieved, respectively. Most teeth contained either three or four canals, but a second, third and fourth mesio-buccal canal was found in 60.39%, 5.94% and 0.99% of teeth, respectively. The disto-buccal and palatal roots contained predominantly single canals, but additional canals were noted in 2.97% and 1.98% of teeth. Four canals were common in females and teeth on the right side often contained a second mesio-buccal canal. However, the prevalence of a third mesio-buccal canal was higher in males than in females. CONCLUSION: The teeth studied showed diversity and variations between sexes and arch sides. These findings will aid clinicians in endodontic treatment and will be applicable for educational purposes.

Optimised liquid chromatography tandem mass spectrometry method for the simultaneous quantification of serum vitamin D analogues while also accounting for epimers and isobars.

The accurate quantification of multiple vitamin D analogues simultaneously is challenging. This study set out to use liquid chromatography-tandem mass spectrometry (LC-MS/MS) to develop a method capable of measuring a comprehensive vitamin D profile, encompassing twelve vitamin D analogues (vitamin D2, D3, 25(OH)D2, 25(OH)D3, 1,25(OH)2D2, 1,25(OH)2D3, 24,25(OH)2D2, 24,25(OH)2D3, 3-epi-25(OH)D2, 3-epi-25(OH)D3, 7αC4 and1α(OH)D3) in a single run. Serum samples were prepared using double liquid-liquid extraction and analysed on an Agilent 6460 QQQ LC-MS/MS equipped with a Pursuit 3 Pentafluorophenyl (4.6 x 100 mm, 3 µm) column. Recovery rates for all analytes were above 95 % with a coefficient of variation (CV) below 10 %. The method exhibited good linearity (r > 0.995) and had a range of detection limits between 0.01 and 0.35 ng/mL and quantification limits between 0.15 and 0.96 ng/mL. Repeatability and within-lab precision were acceptable, with CV values below 10 % and 15 %, respectively. Method accuracy was excellent, with a systematic error below 6.60 %. additionally, all analytes-maintained stability for 48 h following sample preparation, and no interferences were observed among co-eluting analytes. Lastly, this method achieved "world-class" status according to the Sigma metric scale specifications, requiring minimal quality control to ensure data quality. This successfully validated method has the potential not only for improving vitamin D profiling procedures but also for aiding in the diagnosis of other genetic disorders where measuring beyond 25(OH)D is crucial.

Metabolite Changes of Perna canaliculus Following a Laboratory Marine Heatwave Exposure: Insights from Metabolomic Analyses.

Temperature is considered to be a major abiotic factor influencing aquatic life. Marine heatwaves are emerging as threats to sustainable shellfish aquaculture, affecting the farming of New Zealand's green-lipped mussel [Perna canaliculus (Gmelin, 1791)]. In this study, P. canaliculus were gradually exposed to high-temperature stress, mimicking a five-day marine heatwave event, to better understand the effects of heat stress on the metabolome of mussels. Following liquid chromatography-tandem mass spectrometry analyses of haemolymph samples, key sugar-based metabolites supported energy production via the glycolysis pathway and TCA cycle by 24 h and 48 h of heat stress. Anaerobic metabolism also fulfilled the role of energy production. Antioxidant molecules acted within thermally stressed mussels to mitigate oxidative stress. Purine metabolism supported tissue protection and energy replenishment. Pyrimidine metabolism supported the protection of nucleic acids and protein synthesis. Amino acids ensured balanced intracellular osmolality at 24 h and ammonia detoxification at 48 h. Altogether, this work provides evidence that P. canaliculus has the potential to adapt to heat stress up to 24 °C by regulating its energy metabolism, balancing nucleotide production, and implementing oxidative stress mechanisms over time. The data reported herein can also be used to evaluate the risks of heatwaves and improve mitigation strategies for aquaculture.

Apexification of dens evaginatus in a mandibular premolar: A case report.

Key Clinical Message: Dens evaginatus is an uncommon dental anomaly presenting on mandibular premolar teeth. Affected teeth are difficult to diagnose and manage, and often demonstrate immature apices requiring complex endodontic treatment approaches. Abstract: Dens evaginatus (DE) is an uncommon anomaly affecting mandibular premolars, frequently requiring endodontic intervention. This report documents the treatment of an immature mandibular premolar presenting with DE. Early diagnosis and preventive strategies remain the preferred management for these anomalies, however endodontic approaches may be successfully applied to retain these teeth.

Effect of Different Endodontic Access Cavity Designs in Combination with WaveOne Gold and TruNatomy on the Fracture Resistance of Mandibular First Molars: A Nonlinear Finite Element Analysis.

INTRODUCTION: This study evaluated the effect of traditional and conservative endodontic access cavity designs in combination with WaveOne Gold and TruNatomy instrumentation systems on the fracture resistance of mandibular first molars by means of nonlinear finite element analysis (FEA). METHODS: Micro-CT images of 4 human mandibular first molars were used to generate representative FEA models. The mandibular first molars samples were scanned before and after endodontic access cavity preparation and instrumentation of all 3 canals. Five nonlinear static loads were applied vertically and horizontally to specific contact points on the occlusal surface of the teeth. Maximum von Mises stress before failure and distribution of von Mises strains were recorded and compared between groups. RESULTS: Molars with conservative endodontic access cavities required similar levels of loads to reach failure compared with their control samples, whereas molars with traditional endodontic access cavities required significantly reduced loads in order to fail. According to the numerical investigation, the type of instrumentation system was found to have an insignificant effect on the fracture resistance of the teeth under study. Von Mises stress was concentrated around the cervical region and in the larger distal roots for all numerical models. CONCLUSIONS: The fracture resistance of mandibular first molars is influenced significantly by a reduction in dental hard tissue, which was found to control the level of the ultimate failure load for each tooth.

A morphological study of the shape of the corpus callosum in normal, schizophrenic and bipolar patients.

Abnormalities in the morphology of the corpus callosum have been found to be involved in cognitive impairments or abnormal behaviour in patients with mental disorders such as schizophrenia and bipolar disorder. The present study investigated morphological shape differences of the corpus callosum in a large cohort of 223 participants between normal, schizophrenic and bipolar patients on MRI scans, CT scans and cadaver samples. Healthy samples were compared to a mental disorder population sample to determine morphological shapes variations associated with schizophrenia and bipolar disorder. Landmark-based methodology was used to contour the corpus callosum shape that served as standard positions to allow for radial and thickness partitioning in order to determine shape variations within the specific localised anatomical sections of the corpus callosum. Shape analysis was performed using Ordinary Procrustes averaging and superimposing landmarks to define an average landmark position for the specific regions of the corpus callosum. No significant global shape differences were found between the different mental disorders. Schizophrenia and bipolar shapes differed mostly in the genu-rostrum, posterior body, isthmus and splenium. Sample group comparisons yielded significant differences between all groups and global measurement parameters and in various sub-regions. The findings of the present study suggest that the corpus callosum in schizophrenia and bipolar differs significantly compared to healthy controls, specifically in the anterior body and isthmus for schizophrenia and only in the isthmus for bipolar disorder. Shape changes in these regions may possibly, in part, be responsible for the symptoms and cognitive impairments observed in schizophrenia and bipolar disorder.

The Effect of Different Access Cavity Designs in Combination with WaveOne Gold and TruNatomy Instrumentation on Remaining Dentin Thickness and Volume.

INTRODUCTION: The purpose of this study was to evaluate and compare 2 different access cavity designs in combination with 2 popular single-file preparation systems to see which combination preserves dentin, more specifically pericervical dentin, best. The minimum remaining dentin thickness and dentin volumes were evaluated pre- and postinstrumentation. METHODS: Sixty extracted human mandibular molars were selected and randomly divided into 2 different access cavity design preparation groups: traditional access cavities (n = 30) and conservative access cavities (n = 30). Within each cavity preparation design group, the 30 teeth were divided into 2 instrumentation groups (WaveOne Gold Primary; Dentsply Sirona, Ballaigues, Switzerland [n = 15] and TruNatomy Prime, Dentsply Sirona [n = 15]). Samples were scanned using micro-computed tomographic imaging before and after access cavity preparation as well as after final endodontic instrumentation. The pericervical remaining dentin thickness and dentin volume changes were evaluated and compared. RESULTS: Conservative access cavity designs resulted in more favorable remaining dentin thickness. The least amount of mean dentin volume loss was also recorded in the conservative access cavity preparation groups regardless of the preparation instrumentation. CONCLUSIONS: In terms of the remaining pericervical dentin thickness and dentin volume reductions, the authors conclude that conservative access cavity designs preserve dentin best.

The Effect of Different Molar Access Cavity Designs on Root Canal Shaping Times Using Rotation and Reciprocation Instruments in Mandibular First Molars.

INTRODUCTION: The aim was to compare the glide path and final preparation times of WaveOne Gold and TruNatomy in conjunction with two different endodontic access cavity designs in extracted human molar teeth. METHODS: 60 extracted human mandibular molars with mesiobuccal canals were selected and randomly divided into two different access cavity design preparation groups (n = 30). Traditional access cavities (TAC) and conservative access cavities (CAC). Within each cavity design group, the 30 teeth were divided in to two instrumentation groups (WaveOne Gold Primary (n = 15) and TruNatomy Prime (n = 15)). Group 1: TAC, #10 stainless steel manual K-file followed by WaveOne Gold Glider and WaveOne Gold Primary. Group 2: CAC, #10 stainless steel manual K-file followed by WaveOne Gold Glider and WaveOne Gold Primary. Group 3: TAC, #10 stainless steel manual K-file followed by TruNatomy Orifice Modifier and Glider and TruNatomy Prime. Group 4: CAC, #10 stainless steel manual K-file followed by TruNatomy Glider and TruNatomy Prime. Glide path and final preparation times were recorded. RESULTS: Shaping time with TruNatomy Glider in combination with TruNatomy Prime instruments were faster compared to the WaveOne Gold Glider/ WaveOne Gold Primary instruments regardless of the type of access cavity preparation. TAC design yielded faster preparation time (38.2 ± 4.57 seconds) compared to the CAC (55.6 ± 6.91 seconds) in the WaveOne Gold Glider/ WaveOne Gold Primary instrumentation group. No difference was found between the different access cavity design groups in combination with TruNatomy Glider/TruNatomy Prime preparation. CONCLUSION: Preparation time with TruNatomy Glider and Prime instruments was significantly faster than WaveOne Gold Glider/WaveOne Gold Primary, regardless of the access cavity design. TAC design in combination with WaveOne Gold Glider/ WaveOne Gold Primary instrumentation resulted in faster preparation time compared to WaveOne Gold Glider/WaveOne Gold in combination with the CAC design.

The Association Between Anterior Cruciate Ligament Length and Femoral Epicondylar Width Measured on Preoperative Magnetic Resonance Imaging or Radiograph.

PURPOSE: To determine whether femoral epicondylar width (FECW) obtained from either magnetic resonance imaging (MRI) or plain radiographs could be used to predict anterior cruciate ligament (ACL) length. A secondary purpose was to develop a formula to use maximum FECW on either MRI or plain radiographs to estimate ACL length preoperatively. METHODS: The MRIs and radiographs of 40 patients (mean age 41.0 years), with no apparent knee pathology, surgery, or trauma were included. The ACL length was measured on MRI followed by FECW on both MRI and radiograph of the same patient. This allowed the development of equations able to predict ACL length according to the FECW measured on either an MRI or radiograph. RESULTS: The mean ACL length was 40.6 ± 3.6 mm. FECW measured on both MRIs and radiographs was sufficient to predict ACL length. Pearson's correlations revealed a high positive relationship between ACL length and FECW on MRI (r = 0.89, P < .0001) and ACL length and FECW on radiograph (r = 0.83, P < .0001). The coefficient of determination (R2) was calculated to be MRI: R2 = 0.78 and radiograph: R2 = 0.68 and confirmed that FECW measured on both MRI and radiograph were sufficient to predict ACL length. Based on these models, ACL length can be predicted by FECW using the following formulas: MRI: ACL length = 0.47 (FECW) + 1.93 and radiograph: ACL length = 0.31 (FECW) + 11.33. CONCLUSIONS: This study demonstrated that FECW measured on either MRI or anteroposterior radiograph could reliably estimate ACL length on a sagittal MRI. There was a high positive relationship between ACL length and FECW on both MRI and radiographs, although MRIs do predict ACL length more reliably. CLINICAL RELEVANCE: Preoperative ACL length assessment, using FECW on MRI or radiograph, is useful in graft selection and in preventing inadequate graft harvesting for ACL reconstruction, especially if an individualized anatomical approach is pursued.

Root Canal Shaping Using Nickel Titanium, M-Wire, and Gold Wire: A Micro-computed Tomographic Comparative Study of One Shape, ProTaper Next, and WaveOne Gold Instruments in Maxillary First Molars.

INTRODUCTION: The aim of this study was to evaluate the root canal shaping effect of instruments manufactured from nickel titanium, M-Wire, and Gold wire with different glide path preparation techniques. METHODS: One hundred thirty-five mesiobuccal canals of extracted human maxillary molars were randomly divided into 3 equal groups (N = 45) for glide path preparation with K-files (KF) (Dentsply Sirona, Ballaigues, Switzerland), One G (OG) files (Micro-Mega, Besançon, France), and ProGlider (PG) files (Dentsply Sirona). Specimens of each glide path group were further divided equally into 3 groups for instrumentation with ProTaper Next (PTN, Dentsply Sirona), One Shape (OS, Micro-Mega), and WaveOne Gold (WOG, Dentsply Sirona) systems (n = 15). Micro-computed tomographic imaging was used to scan teeth before instrumentation and after shaping to compare centering ratio and canal transportation values at the apical, midroot, and coronal levels and the overall changes in canal volume. Data sets were statistically analyzed (analysis of variance and Kruskal-Wallis H tests). RESULTS: The centering ratios for all groups were statistically similar at all levels. Apical canal transportation was significantly high for K/OS and K/PTN (P = .003). Midroot canal transportation was significantly high for K/PTN, K/OS, and OG/OS (P = .0003). Coronal canal transportation was significantly high for K/PTN and K/OS (P = .011). The highest change in canal volume was observed with all PTN groups and the lowest with PG/WOG (P = .06). CONCLUSIONS: WOG manufactured from Gold wire combined with PG showed better root canal shaping ability and removed less dentin from the canal walls. The nickel-titanium (OS) and M-Wire (PTN) instruments used in combination with KF significantly transported more canals. PTN removed the most dentin from the canal walls regardless of the GPP technique.

Canal Transportation and Centering Ability of WaveOne Gold in Combination with and without Different Glide Path Techniques.

INTRODUCTION: The aim of this study was to compare centering ability and transportation values of the Primary WaveOne Gold (PWOG; Dentsply Sirona, Ballaigues, Switzerland) instrument with or without different glide path techniques. Centering ability and transportation were also compared between the 3 different glide path preparation groups. METHODS: The mesiobuccal canals of 60 extracted human mandibular molars (curvature angles between 25° and 35° and radii ≤10 mm) were selected and randomly divided into 4 groups with 15 canals each. Canals were negotiated to patency with a #8 K-file. Canal preparations were performed by a single operator using precurved #10, 15, and 20 stainless steel manual K-files (group KF); a #10 stainless steel manual K-file followed by PathFiles #1-3 (Dentsply Sirona) (group PF); a #10 stainless steel manual K-file followed by the WaveOne Gold Glider (Dentsply Sirona) (group WOGG); and no further glide path preparation (group NG). Micro-computed tomographic imaging was used to scan teeth before and after glide path preparation. The final canal preparation was performed with PWOG; after which, all 60 specimens were scanned again using micro-computed tomographic imaging. Canal transportation and centering ratio values were determined over levels 3 mm, 5 mm, and 7 mm from the root apex after glide path preparation and again after final preparation with PWOG. One-way analysis of variance was used to statistically compare groups. The significance level was set at P < .05. RESULTS: No statistically significant difference in the mean centering ratios was found after glide path preparation when the KF, PF, and WOGG groups were compared (P > .05). The mean combined transportation values after glide path preparation were statistically significantly higher in the KF group compared with the PF and WOGG groups (P > .05). There was no statistically significant difference in the mean combined centering ratios or transportation values of the NG and 3 glide path groups in combination with PWOG over the 3 levels (P > .05). CONCLUSION: KF group showed the highest mean transportation values during glide path preparation. However, the PWOG instrument's performance regarding centering ability and transportation was not influenced by the different glide path/no glide path preparation groups.

Influence of Glide Path Preparation on the Canal Shaping Times of WaveOne Gold in Curved Mandibular Molar Canals.

INTRODUCTION: The aim of this study was to compare the glide path preparation times of stainless steel hand files, PathFiles (Dentsply Sirona, Ballaigues, Switzerland), and the WaveOne Gold Glider (Dentsply Sirona). The preparation times for final root canal shaping with the Primary WaveOne Gold instrument in extracted human molar teeth with and without prior glide path preparation were also recorded and compared. METHODS: Mesiobuccal canals of 60 extracted human mandibular molars (curvature angles between 25° and 35° and radii <10 mm) were selected and randomly divided into 4 groups with 15 canals each. Canals were negotiated to patency with a #8 K-file. Canal preparations were performed by a single operator using precurved #10-15-20 stainless steel manual K-files (the K-file group), a #10 stainless steel manual K-file followed by PathFiles #1-3 (the PathFile group), a #10 stainless steel manual K-file followed by WaveOne Gold Glider (the WaveOne Gold Glider group), or no further glide path preparation. Final canal preparation of all 60 canals was performed with the Primary WaveOne Gold instrument. Glide path and final preparation times were recorded. RESULTS: Glide path enlargement was statistically significantly fastest in the WaveOne Gold Glider group (19.7 ± 5.6 seconds) followed by the PathFile group (41.0 ± 6.8 seconds) and then the K-file group (81.2 ± 26.3 seconds) using analysis of variance (ANOVA) and Kruskal-Wallis tests (P < .0001). No statistically significant difference in the mean final preparation times was found among the WaveOne Gold Glider (23.1 ± 6.0 seconds), PathFile (24.4 ± 4.9 seconds), and K-file groups (27.2 ± 9.5 seconds). All 3 groups were statistically significantly faster than the no glide path preparation group (35.4 ± 10.2 seconds) using ANOVA (P = .0004) and Kruskal-Wallis tests (P = .0010). CONCLUSIONS: Preparation time with the Primary WaveOne Gold file was statistically significantly reduced when the file was used in combination with any of the glide path preparation techniques. The WaveOne Gold Glider performed statistically significantly faster in glide path preparation time than the other glide path preparation techniques.

The cross-tissue metabolic response of abalone (Haliotis midae) to functional hypoxia.

Functional hypoxia is a stress condition caused by the abalone itself as a result of increased muscle activity, which generally necessitates the employment of anaerobic metabolism if the activity is sustained for prolonged periods. With that being said, abalone are highly reliant on anaerobic metabolism to provide partial compensation for energy production during oxygen-deprived episodes. However, current knowledge on the holistic metabolic response for energy metabolism during functional hypoxia, and the contribution of different metabolic pathways and various abalone tissues towards the overall accumulation of anaerobic end-products in abalone are scarce. Metabolomics analysis of adductor muscle, foot muscle, left gill, right gill, haemolymph and epipodial tissue samples indicated that South African abalone (Haliotis midae) subjected to functional hypoxia utilises predominantly anaerobic metabolism, and depends on all of the main metabolite classes (proteins, carbohydrates and lipids) for energy supply. Functional hypoxia caused increased levels of anaerobic end-products: lactate, alanopine, tauropine, succinate and alanine. Also, elevation in arginine levels was detected, confirming that abalone use phosphoarginine to generate energy during functional hypoxia. Different tissues showed varied metabolic responses to hypoxia, with functional hypoxia showing excessive changes in the adductor muscle and gills. From this metabolomics investigation, it becomes evident that abalone are metabolically able to produce sufficient amounts of energy when functional hypoxia is experienced. Also, tissue interplay enables the adjustment of H. midae energy requirements as their metabolism shifts from aerobic to anaerobic respiration during functional hypoxia.This article has an associated First Person interview with the first author of the paper.

Uncovering the metabolic response of abalone (Haliotis midae) to environmental hypoxia through metabolomics.

INTRODUCTION: Oxygen is essential for metabolic processes and in the absence thereof alternative metabolic pathways are required for energy production, as seen in marine invertebrates like abalone. Even though hypoxia has been responsible for significant losses to the aquaculture industry, the overall metabolic adaptations of abalone in response to environmental hypoxia are as yet, not fully elucidated. OBJECTIVE: To use a multiplatform metabolomics approach to characterize the metabolic changes associated with energy production in abalone (Haliotis midae) when exposed to environmental hypoxia. METHODS: Metabolomics analysis of abalone adductor and foot muscle, left and right gill, hemolymph, and epipodial tissue samples were conducted using a multiplatform approach, which included untargeted NMR spectroscopy, untargeted and targeted LC-MS spectrometry, and untargeted and semi-targeted GC-MS spectrometric analyses. RESULTS: Increased levels of anaerobic end-products specific to marine animals were found which include alanopine, strombine, tauropine and octopine. These were accompanied by elevated lactate, succinate and arginine, of which the latter is a product of phosphoarginine breakdown in abalone. Primarily amino acid metabolism was affected, with carbohydrate and lipid metabolism assisting with anaerobic energy production to a lesser extent. Different tissues showed varied metabolic responses to hypoxia, with the largest metabolic changes in the adductor muscle. CONCLUSIONS: From this investigation, it becomes evident that abalone have well-developed (yet understudied) metabolic mechanisms for surviving hypoxic periods. Furthermore, metabolomics serves as a powerful tool for investigating the altered metabolic processes in abalone.

Location and orientation of lone pairs in apatite-type materials: a computational study.

Electron localisation function (ELF) calculations have been used to provide the first computational location of the cation lone pairs in apatite materials. We show that the orientation of the lone pairs varies depending on the identity and positions of the channel anions. The results represent a new platform for interpreting experimentally observed structure-property relationships in functional apatites. In particular, they have significant implications for ionic conductivity and suggest that structure-property relationships in lone-pair containing apatite-type solid electrolytes are more complex than previously thought.

Effect of Mixed Basic Military Training on the Physical Fitness of Male and Female Soldiers.

INTRODUCTION: Mixed gender basic military training (BMT) is adopted to integrate the female South African soldier into the military. This study aimed to assess gender differences before, during (12 weeks), and after a 20-week mixed BMT course and determine if BMT significantly reduced these differences. METHODS: A total of 186 soldiers (114 male: mean age = 21.0 ± 1.1 year; 72 female: mean age = 20.5 ± 1.2 year) completed the BMT course and all anthropometric, physical fitness, explosive power, and hand grip strength measurements. Repeated-measures analysis of variance was used to model BMT data with main effects for gender comparison between males and females, and time main effect for evaluation of differences between weeks 1, 12, and 20 of BMT, as well as an interaction effect for differences in changes over time for males and females. Alpha was set at α ≤0.05. RESULTS: Male soldiers were significantly taller (p < 0.001) and scored better in all measurements at the start of BMT, differences ranged from 1.6% to 50% between genders. Differences narrowed by up to 18.5% in aerobic, push-up, abdominal measurements, and to 4.6% in the South African National Defense Force fitness test. Differences in power output and hand grip strength remained unchanged. CONCLUSION: Large initial anthropometrical and physical fitness differences decreased but were still obvious at the end of BMT. BMT should bridge the physical gap between male and female soldiers to ensure they can all perform the same duties. The enforcing of equal minimum physical fitness requirements for acceptance into BMT; conditional acceptance into the military subject to the successful completion of a bridging course aimed at improving physical fitness in individuals who do not meet the minimum physical fitness requirements for acceptance; and developing a cyclic physical training program with different entry points, dependent on initial physical performance at the start of BMT, ensuring adequate progression and overload for all soldiers are possible avenues to explore to achieve this goal.

From untargeted LC-QTOF analysis to characterisation of opines in abalone adductor muscle: Theory meets practice.

Abalone have a unique ability to use pyruvate, various amino acids and dehydrogenases, to produce opines as means to prevent the accumulation of NADH during anaerobic conditions. In this study, the theoretical masses, formulae and fragment patterns of butylated opines were used to predict which of these compounds could be found in the abalone adductor muscle using untargeted liquid chromatography quadrupole time-of flight-mass spectrometry. These findings were validated using synthesised opine standards. In essence alanopine, lysopine, strombine and tauropine produced in abalone adductor muscle could be characterised using the highest identification confidence levels.

Glide Path Enlargement of Mandibular Molar Canals by Using K-files, the ProGlider File, and G-Files: A Comparative Study of the Preparation Times.

INTRODUCTION: The preparation of a glide path before the introduction of rotary nickel-titanium instruments is a standard adjunct to ensure increased safety during root canal preparation. The aim of this study was to compare the mean preparation time of manual instrumentation with K-files, G-Files, and the ProGlider instrument to prepare a glide path in curved root canals. METHODS: The mesial canals of 90 mandibular molars (with curvature angles between 25° and 35°) were selected. The specimens were randomly divided into 3 groups with 30 canals each, and canal preparations were performed by an endodontist who used #10-15-20 stainless steel manual K-files (group KF), #10 stainless steel manual K-file followed by #12-17 G-File instruments (group GF), and #10 stainless steel manual K-file followed by #16 ProGlider instrument (group PG). The total time it took to prepare the glide paths was recorded with an electronic stopwatch. New instruments were used for each canal. RESULTS: Glide path enlargement with the PG group (27.9 ± 8.6 seconds) and GF group (41.9 ± 20.1 seconds) was shown to be statistically significantly faster than stainless steel KF group (74.9 ± 24.1 seconds) by using analysis of variance (P < .05). There was no statistically significant difference observed between the mean preparation times of the PG and GF groups (P < .05). CONCLUSIONS: Glide path preparation times with the rotary instrument groups were significantly faster than with stainless steel manual K-files.

Comparison of Canal Transportation and Centering Ability of K-files, ProGlider File, and G-Files: A Micro-Computed Tomography Study of Curved Root Canals.

INTRODUCTION: The purpose of this study was to compare centering ability and apical canal transportation of K-files (KF), ProGlider (PG), and G-Files (GF) after glide path enlargement in curved canals by using micro-computed tomography. METHODS: Thirty canals each were randomly assigned to KF, GF, and PG. Teeth were scanned before and after glide path enlargement to compare centering ability at 3 levels: 1 mm (D1) and 7 mm (D7) from the apical foramen and at the point of maximum root curvature (Dmc). Transportation was assessed in 8 directions at D1. RESULTS: KF were significantly less centered than both nickel-titanium (NiTi) groups at D1. At Dmc, PG exhibited a significantly more centered enlargement than both GF and KF, which were significantly similar. At D7, PG was significantly more centered than KF, but there were no significant differences between GF and KF or between PG and GF (P < .016). KF exhibited significantly more canal transportation at D1 than the NiTi groups (P < .05). CONCLUSIONS: NiTi files cause less transportation than KF. At D1, KF was less centered than both NiTi files. PG remained more centered at Dmc and D7.