Atomistic-scale analysis of the deformation and failure of polypropylene composites reinforced by functionalized silica nanoparticles.

Interfacial adhesion between polymer matrix and reinforcing silica nanoparticles plays an important role in strengthening polypropylene (PP) composite. To improve the adhesion strength, the surface of silica nanoparticles can be modified by grafted functional molecules. Using atomistic simulations, we examined the effect of functionalization of silica nanoparticles by hexamethyldisilazane (HMDS) and octyltriethoxysilane (OTES) molecules on the deformation and failure of silica-reinforced PP composite. We found that the ultimate tensile strength (UTS) of PP composite functionalized by OTES (28 MPa) is higher than that of HMDS (25 MPa), which is in turn higher than that passivated only by hydrogen (22 MPa). To understand the underlying mechanistic origin, we calculated the adhesive energy and interfacial strength of the interphase region, and found that both the adhesive energy and interfacial strength are the highest for the silica nanoparticles functionalized by OTES molecules, while both are the lowest by hydrogen. The ultimate failure of the polymer composite is initiated by the cavitation in the interphase region with the lowest mass density, and this cavitation failure mode is common for all the examined PP composites, but the cavitation position is dependent on the tail length of the functional molecules. The present work provides interesting insights into the deformation and cavitation failure mechanisms of the silica-reinforced PP composites, and the findings can be used as useful guidelines in selecting chemical agents for surface treatment of silica nanoparticles.

Composition-dependent effects of oxygen on atomic structure and mechanical properties of metallic glasses.

Although minor alloying in metallic glasses (MGs) has been extensively investigated, the effect of O doping is still a debatable topic. In the present study, the atomic-level structures and mechanical properties of Zr-based MGs doped with different O contents have been analyzed using ab initio molecular dynamics simulations. It is revealed that O atoms prefer to bond to Zr atoms due to their low mixing enthalpy, and that O atoms degrade the properties of Zr-lean MGs but hardly affect the properties of Zr-rich MGs, with results suggesting a compositional dependence of O doping. For Zr-lean MGs, the fraction of full icosahedra, size of the medium-range-order clusters, Young's modulus and shear modulus decrease sharply with O content, while accompanied by a sharp increase of the non-Frank-Kasper polyhedra, and the ratio of bulk modulus to shear modulus and Poisson's ratio, indicating decreased strength and improved plasticity. For Zr-rich MGs, however, the above-mentioned structural and mechanical features experience little change or only change slightly after O doping, showing low oxygen sensitivity. It is shown that the high Zr content weakens the effect of Zr-O bonding to some extent. The present study not only sheds light on the atomic-level structures of O-doped MGs, which may provide guidelines for designing MGs with low-grade materials, but also helps to explain the previous conflicting results based on the composition-dependence effect.

Strong and superplastic nanoglass.

The strength-ductility tradeoff has been a common long-standing dilemma in materials science. For example, superplasticity with a tradeoff in strength has been reported for Cu50Zr50 nanoglass (NG) with grain sizes below 5 nm. Here we report an improvement in strength without sacrificing superplasticity in Cu50Zr50 NG by using a bimodal grain size distribution. Our results reveal that large grains impart high strength, which is in striking contrast to the physical origin of the improvement in strength reported in the traditional nanostructured metals/alloys. Furthermore, the mechanical properties of NG with a bimodal nanostructure depend critically upon the fraction of large grains. By increasing the fraction of the large grains, a transition from superplastic flow to failure by shear banding is clearly observed. We expect that these results will be useful in the development of a novel strong and superplastic NG.

Necking and notch strengthening in metallic glass with symmetric sharp-and-deep notches.

Notched metallic glasses (MGs) have received much attention recently due to their intriguing mechanical properties compared to their unnotched counterparts, but so far no fundamental understanding of the correlation between failure behavior and notch depth/sharpness exists. Using molecular dynamics simulations, we report necking and large notch strengthening in MGs with symmetric sharp-and-deep notches. Our work reveals that the failure mode and strength of notched MGs are strongly dependent on the notch depth and notch sharpness. By increasing the notch depth and the notch sharpness, we observe a failure mode transition from shear banding to necking, and also a large notch strengthening. This necking is found to be caused by the combined effects of large stress gradient at the notch roots and the impingement and subsequent arrest of shear bands emanating from the notch roots. The present study not only shows the failure mode transition and the large notch strengthening in notched MGs, but also provides significant insights into the deformation and failure mechanisms of notched MGs that may offer new strategies for the design and engineering of MGs.

On the failure load and mechanism of polycrystalline graphene by nanoindentation.

Nanoindentation has been recently used to measure the mechanical properties of polycrystalline graphene. However, the measured failure loads are found to be scattered widely and vary from lab to lab. We perform molecular dynamics simulations of nanoindentation on polycrystalline graphene at different sites including grain center, grain boundary (GB), GB triple junction, and holes. Depending on the relative position between the indenter tip and defects, significant scattering in failure load is observed. This scattering is found to arise from a combination of the non-uniform stress state, varied and weakened strengths of different defects, and the relative location between the indenter tip and the defects in polycrystalline graphene. Consequently, the failure behavior of polycrystalline graphene by nanoindentation is critically dependent on the indentation site, and is thus distinct from uniaxial tensile loading. Our work highlights the importance of the interaction between the indentation tip and defects, and the need to explicitly consider the defect characteristics at and near the indentation site in polycrystalline graphene during nanoindentation.

Inverse pseudo Hall-Petch relation in polycrystalline graphene.

Understanding the grain size-dependent failure behavior of polycrystalline graphene is important for its applications both structurally and functionally. Here we perform molecular dynamics simulations to study the failure behavior of polycrystalline graphene by varying both grain size and distribution. We show that polycrystalline graphene fails in a brittle mode and grain boundary junctions serve as the crack nucleation sites. We also show that its breaking strength and average grain size follow an inverse pseudo Hall-Petch relation, in agreement with experimental measurements. Further, we find that this inverse pseudo Hall-Petch relation can be naturally rationalized by the weakest-link model, which describes the failure behavior of brittle materials. Our present work reveals insights into controlling the mechanical properties of polycrystalline graphene and provides guidelines for the applications of polycrystalline graphene in flexible electronics and nano-electronic-mechanical devices.

Molecular dynamics simulations on the frictional behavior of a perfluoropolyether film sandwiched between diamond-like-carbon coatings.

We perform molecular dynamics simulations to investigate the nanoscale frictional behavior of a perfluoropolyether (PFPE) film sandwiched between two diamond-like-carbon (DLC) coatings. We show that the PFPE films behave like a solid and can perform either a motion-station movement or a continuous motion with fluctuating velocities. The former movement is caused by the alternating stick and slip at the two individual interfaces, while the latter is due to the dynamic sliding motions simultaneously occurring at both interfaces. We reveal that these motion characteristics are governed by the competition between the two interfacial adhesion energies, which are strongly affected by the thermal vibrations and interface roughness fluctuations. We also find that the Amonton's law modified by incorporating the adhesion effect can be used to describe the mean friction traction vs normal pressure relation, but large fluctuations are present at low contact pressures. The magnitude of atomic level friction forces at the interface is found to be highly nonuniform. The directions of atomic level friction forces can even be opposite. With increasing the normal pressure, the nonuniformity of atomic level friction forces decreases first and then increases again. This change can be explained by the concurrent effects from the large difference in material stiffness and the changes in surface roughness under normal pressure. The present work reveals interesting insights into the sliding mechanisms in sandwiched structures and provides useful guidelines for the design of nanoscale lubricant systems.

Study of Materials Deformation in Nanometric Cutting by Large-scale Molecular Dynamics Simulations.

Nanometric cutting involves materials removal and deformation evolution in the surface at nanometer scale. At this length scale, atomistic simulation is a very useful tool to study the cutting process. In this study, large-scale molecular dynamics (MD) simulations with the model size up to 10 millions atoms have been performed to study three-dimensional nanometric cutting of copper. The EAM potential and Morse potential are used, respectively, to compute the interaction between workpiece atoms and the interactions between workpiece atoms and tool atoms. The material behavior, surface and subsurface deformation, dislocation movement, and cutting forces during the cutting processes are studied. We show that the MD simulation model of nanometric cutting has to be large enough to eliminate the boundary effect. Moreover, the cutting speed and the cutting depth have to be considered in determining a suitable model size for the MD simulations. We have observed that the nanometric cutting process is accompanied with complex material deformation, dislocation formation, and movement. We find that as the cutting depth decreases, the tangential cutting force decreases faster than the normal cutting force. The simulation results reveal that as the cutting depth decreases, the specific cutting force increases, i.e., "size effect" exists in nanometric cutting.

Molecular dynamics study on DNA oligonucleotide translocation through carbon nanotubes.

Molecular dynamics simulations are performed to study the translocation of a DNA oligonucleotide in a carbon nanotube (CNT) channel consisting of CNTs of two different diameters. A strong gravitational acceleration field is applied to the DNA molecule and water solvent as an external driving force for the translocation. It is observed that both the CNT channel size and the strength of gravitational field have significant influence on the DNA translocation process. It is found that the DNA oligonucleotide is unable to pass through the (8,8) CNT even under strong gravitational fields, which extends previous finding that DNA cannot be self-inserted into a (8,8) CNT. It is shown that the DNA can pass through the (10,10)-(12,12) and (12,12)-(14,14) CNTs with stronger gravitational field resulting in faster translocation. The translocation time tau is found to follow the inverse power law relationship with the gravitational acceleration a as tau approximately a(-1.21). The energetic analysis of the translocation process shows that there is an energy barrier for DNA translocation into the (10,10) tube from the (14,14) tube, which is in contrast to previous report that DNA can be self-inserted into a (10,10) tube from outside the CNT. This difference with previous report shows that the dynamic behavior of DNA translocation inside a CNT channel is quite different from that of DNA translocation into a CNT from outside the CNT.