ABSTRACT
A major advantage of surgical robots is that they can reduce the invasiveness of a procedure by enabling the clinician to manipulate tools as they would in open surgery but through small incisions in the body. Neurosurgery has yet to benefit from this advantage. Although clinical robots are available for the least invasive neurosurgical procedures, such as guiding electrode insertion, the most invasive brain surgeries, such as tumor resection, are still performed as open manual procedures. To investigate whether robotics could reduce the invasiveness of major brain surgeries while still providing the manipulation capabilities of open surgery, we created a two-armed joystick-controlled endoscopic robot. To evaluate the efficacy of this robot, we developed a set of neurosurgical skill tasks patterned after the steps of brain tumor resection. We also created a patient-derived brain model for pineal tumors, which are located in the center of the brain and are normally removed by open surgery. In comparison, testing with existing manual endoscopic instrumentation, we found that the robot provided access to a much larger working volume at the trocar tip and enabled bimanual tasks without compression of brain tissue adjacent to the trocar. Furthermore, many tasks could be completed faster with the robot. These results suggest that robotics has the potential to substantially reduce the invasiveness of brain surgery by enabling certain procedures currently performed as open surgery to be converted to endoscopic interventions.
Subject(s)
Robotics , Humans , Neurosurgeons , Upper Extremity , Hand , EndoscopesABSTRACT
This paper presents a novel continuum robot sheath for use in single-port minimally invasive procedures such as neuroendoscopy in which the sheath is designed to deliver multiple robotic arms. Actuation of the sheath is achieved by using precurved superelastic tubes lining the working channels used for arm delivery. These tubes perform a similar role to push/pull tendons, but can accomplish shape change of the sheath via rotation. A kinematic model using Cosserat rod theory is derived which is based on modeling the system as a set of eccentrically aligned precurved tubes constrained along their length by an elastic backbone. The specific case of a two-arm sheath is considered in detail. Simulation and experiments are used to investigate the validate the concept and model.
ABSTRACT
Soft robots can provide advantages for medical interventions given their low cost and their ability to change shape and safely apply forces to tissue. This article explores the potential for their use for endoscopically-guided balloon dilation procedures in the airways. A scalable robot design based on balloon catheter technology is proposed, which is composed of five balloons together with a tip-mounted camera and LED. Its design parameters are optimized with respect to the clinical requirements associated with balloon dilation procedures in the trachea and bronchi. Possessing a lumen to allow for respiration and powered by the pressure and vacuum sources found in a clinical procedure room, the robot is teleoperated through the airways using a game controller and real-time video from the tip-mounted camera. The robot design includes proximal and distal bracing balloons that expand radially to produce traction forces. The distal bracing balloon is also used to perform balloon dilation. Three actuation balloons, located between the bracing balloons, produce elongation and bending of the robot body to enable locomotion and turning. An analysis of the actuation balloons, which incorporate helical coils to prevent radial collapse, provides design formulas by relating geometric parameters to such performance criteria as maximum change in actuator length and maximum robot bending angle. Experimental evaluation of a prototype robot inside rigid plastic tubes and ex vivo porcine airways is used to demonstrate the potential of the approach.
Subject(s)
Robotics , Swine , Animals , Robotics/methods , Endoscopes , Catheterization , Endoscopy , PlasticsABSTRACT
Like ready-to-wear clothing, medical devices come in a fixed set of sizes. While this may accommodate a large fraction of the patient population, others must either experience suboptimal results due to poor sizing or must do without the device. Although techniques have been proposed to fabricate patient-specific devices in advance of a procedure, this process is expensive and time consuming. An alternative solution that provides every patient with a tailored fit is to create devices that can be customized to the patient's anatomy as they are delivered. This paper reports an in vivo molding process in which a soft flexible photocurable stent is delivered into the trachea or bronchi over a UV-transparent balloon. The balloon is expanded such that the stent conforms to the varying cross-sectional shape of the airways. UV light is then delivered through the balloon curing the stent into its expanded conformal shape. The potential of this method is demonstrated using phantom, ex vivo and in vivo experiments. This approach can produce stents providing equivalent airway support to those made from standard materials while providing a customized fit.
ABSTRACT
OBJECTIVE: Describe the secondary capability of a robotic system to provide real-time measurements of airway dimensions with high fidelity. METHODS: Seven unique phantoms of laryngotracheal stenosis (LTS) were modeled using a computer-aided design tool and were three dimensionally printed. These stenoses were of different dimensions and orientations, and some were purposefully oblique. The dimensions of the stenoses were then measured with the novel Robotic ENT (Ear, Nose, and Throat) Microsurgery System (REMS; Galen Robotics, Inc., Sunnyvale, CA) because it is capable of tool position memory in three dimensional (3D) space. Five participants (two laryngologists, two otolaryngology-head and neck surgery residents, one neurotology fellow) measured each axis of stenosis (anteroposterior, lateral, and craniocaudal) three times for each of the seven stenosis phantoms. These measurements were then compared to the known design dimensions. Mean magnitude of error (MOE) and interrater reliability (IRR) using an intraclass correlation coefficient (ICC) were then calculated. RESULTS: Mean MOE and standard deviation for all measurements was 0.306 ± 0.247 mm. Mean MOE was 0.374 ± 0.292 mm, 0.300 ± 0.237 mm, and 0.244 ± 0.185 mm for the anteroposterior, lateral, and craniocaudal dimensions of stenosis, respectively. Eighty-two percent of all measurements had MOE < 0.5 mm. ICC was 0.945 (95% confidence interval [CI]: 0.847-0.989), 0.995 (95% CI: 0.984-0.999), and 0.993 (95% CI: 0.987-0.999) for anteroposterior, lateral, and craniocaudal dimensions, respectively, indicating excellent agreement among participants. CONCLUSION: The REMS can be used to reliably and accurately measure airway dimensions in 3D regardless of the orientation of stenosis. This ability may be easily extrapolated to the measurement of any airway lesion during laryngotracheal surgery. LEVEL OF EVIDENCE: 4 Laryngoscope, 129:324-329, 2019.