ABSTRACT
Achieving sufficient selectivity in bioanalysis is critical to ensure accurate quantitation of drugs and metabolites in biological matrices. Matrix effects most classically refer to modification of ionization efficiency of an analyte in the presence of matrix components. However, nonanalyte or matrix components present in samples can adversely impact the performance of a bioanalytical method and are broadly considered as matrix effects. For the current manuscript, we expand the scope to include matrix elements that contribute to isobaric interference and measurement bias. These three categories of matrix effects are illustrated with real examples encountered. The causes, symptoms, and suggested strategies and resolutions for each form of matrix effects are discussed. Each case is presented in the format of situation/action/result to facilitate reading.
Subject(s)
Pharmaceutical Preparations/blood , Animals , Calibration , Chromatography, High Pressure Liquid/standards , Dogs , Humans , Isotope Labeling , Mice , Pharmaceutical Preparations/metabolism , Pharmaceutical Preparations/urine , Phospholipids/chemistry , Polyethylene Glycols/chemistry , Quality Control , Rabbits , Rats , Tandem Mass Spectrometry/standardsABSTRACT
A sensitive and selective bioanalytical assay was developed and validated for the determination of enantiomeric molindone in human plasma using high-performance liquid chromatography-tandem mass spectrometry along with supported liquid extraction procedures. The chiral separation was evaluated and optimized on macrocyclic antibiotic type chiral stationary phases (CSPs) based on teicoplanin aglycone (Chirobiotic TAG) in polar organic, polar ionic, and reversed-phase mode chromatography, respectively. Complete baseline separation was achieved on a Chirobiotic TAG column under isocratic condition in reversed-phase chromatography. The method validation was conducted using a Chirobiotic TAG column (100 mm x 2.1 mm) over the curve range 0.100-100 ng/ml for each molindone enantiomer using 0.0500 ml of plasma sample. The flow rate was 0.8 ml/min and the total run time was 9 min. Supported liquid extraction in a 96-well plate format was used for sample preparation. Parameters including recovery, matrix effect, linearity, sensitivity, specificity, carryover, precision, accuracy, dilution integrity, and stability were evaluated. The intra- and inter-day precision and accuracy of the quality control samples at low, medium, and high concentration levels were RSD Subject(s)
Antipsychotic Agents/blood
, Macrocyclic Compounds/chemistry
, Molindone/blood
, Anti-Bacterial Agents/chemistry
, Antipsychotic Agents/chemistry
, Calibration
, Chromatography, High Pressure Liquid
, Data Interpretation, Statistical
, Freezing
, Humans
, Molindone/chemistry
, Quality Control
, Reference Standards
, Reproducibility of Results
, Stereoisomerism
, Tandem Mass Spectrometry
ABSTRACT
Sensitive and high-throughput bioanalytical assays are of vital importance to drug discovery and development. Ultra-performance liquid chromatography (UPLC), utilizing sub-2-microm particles, greatly increases the separation throughput and efficiency, resulting in LC peaks as narrow as or less than 1 s (full width at half maxima, FWHM). This, however, could pose practical challenges for bioanalytical applications using quadrupole mass spectrometry (MS) to acquire sufficient data points to ensure accurate and reliable quantitation. Here, we present a novel 'peak parking' strategy to reduce the flow rate during UPLC peak elution, therefore extending the useful MS acquisition window. The high-throughput advantage of UPLC is maintained since no significant increase of the overall UPLC run time is needed. This strategy was demonstrated in an assay development for lansoprazole, a gastric proton-pump inhibitor, in human plasma employing liquid-liquid extraction. The method was validated from 50.0 to 50,000 pg/mL.
Subject(s)
2-Pyridinylmethylsulfinylbenzimidazoles/blood , Algorithms , Biological Assay/methods , Chromatography, High Pressure Liquid/methods , Flow Injection Analysis/methods , Spectrometry, Mass, Electrospray Ionization/methods , Humans , Lansoprazole , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
An ammonium-adduct based liquid chromatography-tandem mass spectrometry (LC-MS/MS) method has been developed and validated for the simultaneous determination of three isomeric metabolites of tacrolimus (FK506), 13-O-demethylated (M1), 31-O-demethylated (M2) and 15-O-demethylated (M3) tacrolimus in human whole blood and plasma. These metabolites and the internal standards were extracted from biological matrix by methylbutyl ether (MTBE). Separation was achieved on a Genesis C(18) column with a gradient mobile phase elution. Ammonium-adduct ions formed by a Turbo Ionspray in positive ion mode were used to detect each analyte and internal standard. The MS/MS detection was by monitoring the fragmentation of 807.5-->772.4 (m/z) for M1, 807.5-->754.5 (m/z) for both M2 and M3, 795.5-->760.5 (m/z) for IS1 (FR298701) and 961.5-->908.5 (m/z) for IS2 (FR290198) on a triple quadrupole mass spectrometer (Sciex API 3000). The retention times were approximately 4.1 min for M1, 6.8 min for M2, 6.0 min for M3, and 3.9 min for IS1 and 6.4 min for IS2, respectively. The validated dynamic range was 0.2-20 ng/ml for all three metabolites based on a sample volume of 0.25-ml. The linearity of calibration curves for M1, M2, and M3 in both matrices had a correlation coefficient of >/=0.9984. In whole blood, validation data showed intra-batch (n=6) CVs of =5.9% and REs between -4.9 and 3.6% and inter-batch (N=18) CVs of =4.9% and REs between -3.5 and 1.5% for all three metabolites. In human plasma, validation data showed intra-batch (n=6) CVs of =7.3% and REs between -5.1 and 7.6% and inter-batch (N=18) CVs of =6.6% and REs between -0.3 and 4.7% for all three metabolites. Extraction recoveries were 72% for M1, 87% for M2, 69% for M3, 79% for IS1, and 74% for IS2 from blood; and 94% for M1, 96% for M2, 98% for M3, 92% for IS1, and 93% for IS2 from plasma. All three metabolites in human blood and plasma were stable for three freeze-thaw cycles, or 24-h ambient storage, or 12 months storage at approximately -80 degrees C. Extracted samples were stable for at least 50h at room temperature (RT). This method has been successfully used to analyze whole blood and plasma samples from human pharmacokinetic studies. Several key factors affecting the performance of the assay methods have also been addressed briefly.
Subject(s)
Chromatography, High Pressure Liquid/methods , Spectrometry, Mass, Electrospray Ionization/methods , Tacrolimus/blood , Blood Preservation/methods , Freezing , Humans , Isomerism , Reproducibility of Results , Tacrolimus/chemistry , Tacrolimus/metabolism , Time FactorsABSTRACT
A bioanalytical method using automated sample transferring, automated solid phase extraction (SPE) and liquid chromatography-tandem mass spectrometry (LC-MS-MS) was developed for morphine (MOR), and its metabolites morphine-3-glucuronide (M3G) and morphine-6-glucuronide (M6G) in human plasma. Samples of 0.25 ml were transferred into 96-well plate using automatic liquid handler (Multiprobe II). Automated SPE was carried out on a 96-channel programmable liquid handling workstation (Quadra 96) using a C(18) sorbent. The extract was injected onto a silica column using an aqueous-organic mobile phase. The chromatographic run time was 3.5 min per injection, with retention times of 1.5, 2.0 and 2.6 min for MOR, M6G, and M3G, respectively. The detection was by monitoring MOR at m/z 286-->152, M6G and M3G at m/z 462-->286. The deuterated internal standards were monitored at m/z 289-->152 for MOR-d(3), and m/z 465-->289 for M6G-d(3) and M3G-d(3). The standard curve range was 0.5-50 ng ml(-1) for MOR, 1.0-100 ng ml(-1) for M6G, and 10-1000 ng ml(-1) for M3G. The inter-day precision and accuracy of the quality control samples were <8% relative standard deviation (RSD) and <7% relative error (RE) for MOR, <5% RSD and <2% RE for M6G, and <2% RSD and <4% RE for M3G.