Clinical efficacy of greater trochanter osteotomy with tension wire fixation in total hip arthroplasty for Crowe type IV developmental dysplasia of the hip.

OBJECTIVE: The choice of osteotomy in joint replacement surgery for Crowe type IV developmental dysplasia of the hip (DDH) is a challenging and controversial procedure. In this study, we compared the clinical efficacy of a combination of greater trochanter osteotomy and tension wire fixation with that of subtrochanteric osteotomy. METHODS: We performed 15 primary total hip arthroplasty (THA) procedures between January 2016 and July 2020 on 13 patients with a combination of greater trochanter osteotomy and tension wire fixation (the GTT group) and 12 THA procedures in 11 patients using subtrochanteric osteotomy (the STO group). The mean follow-up was 2.8 years (range 2.2-4.5 years) in the GTT group and 2.6 years (range 2.5-4.3 years) in the STO group. Clinical scores and radiographic results were evaluated during the final follow-up for the 15 hips in the GTT group and 12 hips in the STO group. RESULTS: Postoperative Harris hip scores, implant position, and the surgery time did not differ between the treatment groups. There were no differences in preoperative leg length discrepancy LLD (P = 0.46) and postoperative LLD (P = 0.56) between the two groups. Bone union occurred within 6 months after surgery in 12 hips in the GTT group (92.3%) and in 9 hips (81.8%) in the STO group. One case in the GTT group and two cases in the STO group had nonunion, and additionally, there was one case of postoperative nerve injury in the STO group, while no symptoms of nerve damage were observed in the GTT group. CONCLUSION: The GTT method demonstrated many advantages and reliable clinical results for Crowe type IV DDH patients undergoing THA. This is a surgical method that warrants further development and promotion clinically.

Carbamazepine regulates USP10 through miR-20a-5p to affect the deubiquitination of SKP2 and inhibit osteogenic differentiation.

BACKGROUND: Antiepileptic drugs (AEDs) harm bone health and are significantly associated with osteoporosis development. In this study, we aimed to explore the mechanisms involved in carbamazepine (CBZ) and microRNA (miR)-20a-5p/ubiquitin-specific peptidase 10 (USP10)/S-phase kinase-associated protein 2 (SKP2) axis in osteoporosis. METHODS: Human bone marrow mesenchymal stem cells (BMSCs) were treated with different concentrations of CBZ. Knocking down or overexpressing miR-20a-5p, USP10, and SKP2 cell lines were constructed. The expressions of miR-20a-5p, USP10, SKP2, runt-related transcription factor 2 (Runx2), Alkaline phosphatase (ALP), Osterix (Osx), osteocalcin (OCN) and Collagen I were detected with western blot (WB) and reverse transcriptase-quantitative polymerase chain reaction (RT-qPCR). Alizarin Red S (ARS) staining was performed to measure calcium deposition. Dual-luciferase assay and RNA immunoprecipitation (RIP) were applied to verify the binding relationship between miR-20a-5p and USP10. USP10 and SKP2 combination was verified by Co-Immunopurification (Co-IP). The stability of the SKP2 protein was verified by Cycloheximide chase assay. RESULTS: CBZ could reduce cell activity. ALP activity and ARS staining were enhanced in the osteogenic induction (OM) group. The expressions of Runx2, ALP, Osx, OCN and Collagen I were increased. CBZ reduced miR-20a-5p expressions. Verification experiments showed miR-20a-5p could target USP10. USP10 increased SKP2 stability and promoted SKP2 expression. CBZ regulated miR-20a-5p/USP10/SPK2 and inhibited BMSCs osteogenic differentiation. CONCLUSIONS: CBZ regulated USP10 through miR-20a-5p to affect the deubiquitination of SKP2 and inhibit osteogenic differentiation, which provided a new idea for osteoporosis treatment.

Synthesis of CuCo2S4@Expanded Graphite with crystal/amorphous heterointerface and defects for electromagnetic wave absorption.

The remarkable advantages of heterointerface and defect engineering and their unique electromagnetic characteristics inject infinite vitality into the design of advanced carbon-matrix electromagnetic wave absorbers. However, understanding the interface and dipole effects based on microscopic and macroscopic perspectives, rather than semi-empirical rules, can facilitate the design of heterointerfaces and defects to adjust the impedance matching and electromagnetic wave absorption of the material, which is currently lacking. Herein, CuCo2S4@Expanded Graphite heterostructure with multiple heterointerfaces and cation defects are reported, and the morphology, interfaces and defects of component are regulated by varying the concentration of metal ions. The results show that the 3D flower-honeycomb morphology, the crystal-crystal/amorphous heterointerfaces and the abundant cation defects can effectively adjust the conductive and polarization losses, achieve the impedance matching balance of carbon materials, and improve the absorption of electromagnetic wave. For the sample CEG-6, the effective absorption of Ku band with RLmin of -72.28 dB and effective absorption bandwidth of 4.14 GHz is realized at 1.4 mm, while the filler loading is only 7.0 wt. %. This article reports on the establishment of potential relationship between crystal-crystal/amorphous heterointerfaces, cation defects, and the impedance matching of carbon materials.

Oct4 facilitates chondrogenic differentiation of mesenchymal stem cells by mediating CIP2A expression.

Bone development and cartilage formation require strict modulation of gene expression for mesenchymal stem cells (MSCs) to progress through their differentiation stages. Octamer-binding transcription factor 4 (Oct4) expression is generally restricted to developing embryonic pluripotent cells, but its role in chondrogenic differentiation (CD) of MSCs remains unclear. We therefore investigated the role of Oct4 in CD using a microarray, quantitative real-time polymerase chain reaction, and western blotting. The expression of Oct4 was elevated when the CD of cultured MSCs was induced. Silencing Oct4 damaged MSC growth and proliferation and decreased CD, indicated by decreased cartilage matrix formation and the expression of Col2a1, Col10a1, Acan, and Sox9. We found a positive correlation between the expression of CIP2A, a natural inhibitor of protein phosphatase 2A (PP2A) and that of Oct4. Cellular inhibitor of PP2A (CIP2A) expression gradually increased after CD. Overexpression of CIP2A in MSCs with Oct4 depletion promoted cartilage matrix deposition as well as Col2a1, Col10a1, Acan, and Sox9 expression. The chondrogenic induction triggered c-Myc, Akt, ERK, and MEK phosphorylation and upregulated c-Myc and mTOR expression, which was downregulated upon Oct4 knockdown and restored by CIP2A overexpression. These findings indicated that Oct4 functions as an essential chondrogenesis regulator, partly via the CIP2A/PP2A pathway.

Ultrasound and microwave-assisted recycling of spent mercuric chloride catalyst.

It is urgent to develop a high-efficient process for recycling the spent mercuric chlorides catalyst (SMC) from vinyl chloride monomer (VCM) production with the implementation of the 'Minamata Convention on mercury'. A ultrasound and microwave-assisted technology were developed to treat SMC in this study. Firstly, organic carbon deposition was separated from SMC by pretreatment (ultrasonic-assisted ethanol extraction). The optimized extraction conditions were: ultrasonic time 2 h, ultrasonic power 700 W, extraction temperature 65°C, and liquid-solid ratio 7:1. Under these conditions, 90% of hazardous Cl-containing organics were separated from SMC. Then the pretreated SMC was treated by microwave heating for mercury removal. Residual mercury concentration of SMC decreased from original 1.33% to only 11.92 mg/kg at the preferred conditions of 500°C for 60 min and the treated SMC passed the Toxicity Characteristics Leaching Procedure (TCLP) test. Simultaneously, catalyst support activated carbon (AC) was regenerated with specific surface area increasing from original 263.85 to 627.5 m2/g. The organics from macropores and surface of AC was removed by pretreatment, intensifying the subsequent Hg removal and regeneration of AC as revealed by the comparative studies. Finally, SMC was subjected to water leaching for recovering metal values. 88.7% of Ba and 95.3% of Ce were leached with ultrasonic power 500 W and ultrasonic time 120 min. SMC was detoxified and valuable components Hg, AC, Ba, Ce were recovered by this new process, which may provide a new idea for industrial treatment of SMC.

Hydrazone ligation assisted DNAzyme walking nanomachine coupled with CRISPR-Cas12a for lipopolysaccharide analysis.

In this work, hydrazone ligation assisted DNAzyme walking nanomachine is explored to couple with CRISPR-Cas12a trans-cleavage. Hydrazone ligation with high efficiency can mediate signal input which can be induced by target binding, thereby regulating the performance of DNAzyme walking nanomachine. The product strand from DNAzyme walking nanomachine can further activate the trans-cleavage of Cas12a. So, cascade signal amplification can be achieved to enhance the sensitivity for target detection. Subsequently, hydrazone ligation assisted DNAzyme walking nanomachine coupled with CRISPR-Cas12a has been further developed as a biosensor to analyze lipopolysaccharides. The developed biosensor exhibits a linear range from 0.05 ng/mL to 106 ng/mL and a lowest limit of detection of 7.31 fg/mL. This research provides a new mode for the signal output of DNAzyme walking nanomachine, so as to sensitively analyze different biomolecules.

Efficacy and Safety of Denosumab in Osteoporosis or Low Bone Mineral Density Postmenopausal Women.

Denosumab, a human monoclonal antibody, acts against the receptor activator of nuclear factor-κB ligand and is a promising antiresorptive agent in patients with osteoporosis. This study aimed to update the efficacy and safety of denosumab vs. placebo in osteoporosis or low bone mineral density (BMD) postmenopausal women. PubMed, Embase, Cochrane library, and ClinicalTrials.gov were searched for randomized controlled trials (RCTs) reporting the efficacy and safety data of denosumab vs. placebo in osteoporosis or low BMD postmenopausal women. A random-effects model was used to calculate pooled weight mean differences (WMDs) or relative risks (RRs) with corresponding 95% confidence intervals (CIs) for treatment effectiveness of denosumab vs. placebo. Eleven RCTs including 12,013 postmenopausal women with osteoporosis or low BMD were preferred for the final meta-analysis. The summary results indicated that the percentage change of BMD in the denosumab group was greater than that of BMD in placebo at 1/3 radius (WMD: 3.43; 95%CI: 3.24-3.62; p < 0.001), femoral neck (WMD: 3.05; 95%CI: 1.78-4.33; p < 0.001), lumbar spine (WMD: 6.25; 95%CI: 4.59-7.92; p < 0.001), total hip (WMD: 4.36; 95%CI: 4.07-4.66; p < 0.001), trochanter (WMD: 6.00; 95%CI: 5.95-6.05; p < 0.001), and total body (WMD: 3.20; 95%CI: 2.03-4.38; p < 0.001). Moreover, denosumab therapy significantly reduced the risk of clinical fractures (RR: 0.57; 95%CI: 0.51-0.63; p < 0.001), nonvertebral fracture (RR: 0.83; 95%CI: 0.70-0.97; p = 0.018), vertebral fracture (RR: 0.32; 95%CI: 0.25-0.40; p < 0.001), and hip fracture (RR: 0.61; 95%CI: 0.37-0.98; p = 0.042). Finally, denosumab did not cause excess risks of adverse events. These findings suggested that postmenopausal women receiving denosumab had increased BMDs and reduced fractures at various sites without inducing any adverse events.

Chemoselective ligation assisted DNA walker for analysis of double targets.

Chemoselective ligation assisted DNA walker with input and output of double signals, has been constructed through simultaneous assistance of oxime chemistry and alkyne-azide cycloaddition. The constructed DNA walker has been further developed as a biosensor with lipopolysaccharide (LPS) and 5-hydroxymethyl-2-furaldehyde (HMF) as targets. The biosensor owns one-to-one mapping functionality and can sensitively distinguish all cases of two targets through the unique output signal feature. Moreover, the biosensor can simultaneously analyze LPS and HMF. This work provides a new insight for analysis of double targets based on chemoselective ligation assisted DNA walker.

Over-expression of MEG3 promotes differentiation of bone marrow mesenchymal stem cells into chondrocytes by regulating miR-129-5p/RUNX1 axis.

This study explored the role of MEG3 in the cartilage differentiation of bone marrow mesenchymal stem cells (BMSCs). We investigated the effects of over-expression and knockdown of MEG3 on cell viability, cell differentiation, and the expressions of MEG3, miR-129-5p, COL2, chondrocyte differentiation-related genes (sry-type high-mobility-group box 9 (SOX9), SOX5, Aggrecan, silent information regulator 1 (SIRT1), and Cartilage oligomeric matrix protein (COMP)). The targeting relationship between MEG3 and miR-129-5p and the target gene of miR-129-5p was confirmed through Starbase, TargetScan and luciferase experiments. Finally, a series of rescue experiments were conducted to study the regulatory effects of MEG3 and miR-129-5p. BMSCs were identified as CD29+ and CD44+ positive, and their differentiation was time-dependent. As BMSCs differentiated, MEG3 expression was up-regulated, but miR-129-5p was down-regulated. Over-expressed MEG3 promoted the viability and differentiation of BMSCs, up-regulated the expressions of COL2 and chondrocyte differentiation-related genes, and inhibited miR-129-5p. Runt-related transcription factor 1 (RUNX1) was negatively regulated as a target gene of miR-129-5p. Results of rescue experiments showed that the inhibitory effect of miR-129-5p mimic on BMSCs could be partially reversed by MEG3. Over-expression of MEG3 regulated the miR-129-5p/RUNX1 axis to promote the differentiation of BMSCs into chondrocytes. This study provides a reliable basis for the application of lncRNA in articular cartilage injury.

Ultrasound-assisted cleaning chloride from wastewater using Friedel's salt precipitation.

The chloride salt derived from the rare earth smelting wastewater was effectively dislodged using Friedel's salt precipitation assisted with ultrasonic enhancement. Various single factors such as the reagent ratio, temperatures, reaction time and agitation speed were determined and investigated systematically. Results showed that the optimal single-stage removal efficiency were 88.22% and 80.89% with and without ultrasonic strengthen, respectively. The particle size distribution, morphology and elemental analysis of the precipitation were carried out by TEM, SEM, EDS and XRD analysis. These results revealed that the effect of ultrasonic has been given prominence to the removal efficiency of chloride salt. It is attributed to the cavitation and mechanical disturbance effect of ultrasound. In order to further decline the chloride, a two-stage de-chlorination carried out, the result indicated that the concentration of chloride was 120 mg/L and 430 mg/L with and without ultrasonic strengthening afterwards two-stage de-chlorination, respectively. The chloride concentration can fully meet the effluent concentration requirement under the effect of ultrasonic enhancement.

Kinetics characteristics and microwave reduction behavior of walnut shell-pyrolusite blends.

Combining biomass pyrolysis with microwave heating technologies provides a novel and efficient approach for low-grade pyrolusite reduction. The microwave reduction behavior and pyrolysis kinetic characteristics of walnut shell-pyrolusite blends were explored. Results indicated the optimal reduction parameters were: reduction temperature of 650 °C, holding time of 30 min, Mbio/More of 1.8:10, and microwave power of 1200 W. The co-pyrolysis characteristics of the blends included four stages: dehydration, pre-pyrolysis, intense pyrolysis and reduction, and slow pyrolysis and reduction. Fitting analysis based on Coats-Redfern method revealed that chemical reaction was the control step of the process of reducing pyrolusite by biomass, which the finding matched to the isothermal kinetic analysis results determined through unreacted shrinking nuclear model. The activation energies and pre-exponential factors were determined at 5.62 kJ·mol-1-16.69 kJ·mol-1 and 0.0426 min-1-0.515 min-1. The work provides sound references for promoting the industrial application of the combined method on minerals reduction.

MiR-146a-5p promotes IL-1ß-induced chondrocyte apoptosis through the TRAF6-mediated NF-kB pathway.

OBJECTIVE: This study aimed to explore the role of the miR-146a-5p/TRAF6/NF-KB axis in chondrocyte apoptosis. METHODS: Transcriptome sequencing for microRNA expression in control and osteoarthritic cartilage was performed. Bioinformatic analysis was performed to identify the target genes of miR-146a-5p, and subsequently, Gene Ontology (GO) terms and KEGG pathways were identified. Furthermore, protein-protein interactions were analyzed to identify the hub regulatory gene of miR-146a-5p. MiR-146a-5p mimic, inhibitor and the corresponding negative control were constructed, and the apoptosis rates were measured in the transfected groups by flow cytometry, TUNEL staining and Western blot. Potential miRNA-target interactions were identified by dual-luciferase reporter assay. RESULTS: The microRNA array demonstrated that miR-146a-5p was significantly upregulated in osteoarthritic tissues, which was further confirmed by PCR analysis. Compared with the control group, IL-1ß significantly decreased the viability of chondrocytes, while coculture with miR-146a-5p inhibitor rescued the IL-1ß-induced inhibition of chondrocyte viability. Western blot results also identified the proapoptotic effects of miR-146a-5p. Bioinformatic analysis results revealed that miR-146a-5p targeted 159 potential genes, and TRAF6 was the hub gene among the 159 genes. The relative expression of TRAF6 was significantly decreased in the IL-1ß-induced group. When siTRAF6 was added, apoptosis was significantly increased. Luciferase reporter assays showed that luciferase activity of the TRAF6 3'-UTR reporter was decreased in chondrocytes after transfection with the miR-146a-5p mimic. CONCLUSIONS: This work showed that miR-146 induces chondrocyte apoptosis by targeting the TRAF6-mediated NF-KB signaling pathway, and miR-146 may be a potential target for OA treatment.

Investigations on the microwave absorption properties and thermal behavior of vanadium slag: Improvement in microwave oxidation roasting for recycling vanadium and chromium.

Vanadium slag contains high contents of vanadium and chromium with complex and dense structures, hence microwave heating instead of conventional methods is expected to destroy the dense structure and further to improve the extraction rate of vanadium and chromium, and exploring its dielectric properties is the prerequisite work. Microwave absorption properties and thermal behavior of vanadium slag were investigated. Results indicated that vanadium slag endowed excellent microwave absorption properties, with minimum εr' value of 34.447 (F/M). Dielectric properties of vanadium slag varied with temperature, which changing trend was matched to the three stages of microwave heating characteristics identified by heating rates. Meanwhile, the changing process of dielectric properties also corresponded to the three processes of thermogravimetric characteristics: dehydration stage (30 °C-280 °C), oxidation decomposition of olivine phase and normal spinel phase (280 °C-650 °C), and oxidation decomposition of vanadium chromium spinel (650 °C-950 °C). Moreover, the maximum dielectric constant and highest microwave heating rate of vanadium slag both appeared at the temperature regime of 500 °C-550 °C, which was also the main temperature regime for oxidation decomposition of olivine phase and normal spinel phase in vanadium slag, demonstrating the appropriate process temperature for microwave heating technology to recycle vanadium slag.

Efficient Preparation of Si3N4 by Microwave Treatment of Solar-Grade Waste Silicon Powder.

In this study, the waste silicon powder generated in the production of solar-grade polysilicon scrap was used as the raw material, and silicon nitride (Si3N4) was directly efficient prepared by the microwave heating nitridation. The temperature raising characteristics of silicon powder by microwave heating and the influencing factors of the nitridation reaction process were studied. The thermogravimetric analysis was performed, and the temperature raising dielectric properties of silicon powder were studied. The electromagnetic field and temperature distributions of the microwave heating-induced silicon powder nitridation process were simulated using COMSOL software. The nitridation reaction of silicon powder induced by microwave heating has better temperature raising characteristics: the average heating rate can reach 135 °C/min, and the reaction time is significantly shortened (only 10-20 min). Microwave heating decreases the nitridation reaction temperature by more than 100 °C and greatly shortens the reaction time. With the increase of nitrogen pressure and reaction time, the nitridation reaction is better. In addition, the conversion of the nitridation reaction is more than 97%, and the products are mainly ß-Si3N4 with the uniform and columnar morphology. Finally, it is proved that the efficient recovery and utilization of industrial waste silicon powder are realized, and there is lower energy consumption by microwave heating technology.

Simultaneous removal of Cr(III) and V(V) and enhanced synthesis of high-grade rutile TiO2 based on sodium carbonate decomposition.

Rutile TiO2 is widely applied as the raw material to produce titanium dioxide and titanium sponge, whereas the Cr (III) and V (V) impurities in rutile TiO2 significantly affect the performance of related products. In the present work, the sodium carbonate decomposition treatment on Panzhihua titanium slag was attempted, to improve the preparation process of rutile TiO2 with high crystallinity and simultaneously reduce the chromium (Cr) and vanadium (V) content as hazardous elements. Effects of sodium carbonate decomposition treatment on the crystal composition, microstructure of rutile TiO2 were determined using XRD, SEM and Raman characterization. The recovery of Cr(III) and V(V) was achieved through leaching the roasted titanium slag by dilute sulfuric acid, with the chromium and vanadium content in the residue decreasing up to 0.03 % and 0.04 %, respectively, followed by the final product rutile TiO2 was produced by the leaching residue calcined at 1323.15 K with a duration time of 120 min, with 85.56 % of TiO2 grade. The work highlights the feasibility of synchronously preparing rutile TiO2 and removing hazardous Cr (III) and V (V) impurities from titanium slag using sodium carbonate decomposition.

The mineralization, drug release and in vivo bone defect repair properties of calcium phosphates/PLA modified tantalum scaffolds.

Calcium phosphate based biomaterials have been widely studied in biomedical areas. Herein, amorphous calcium phosphate (ACP) nanospheres and hydroxyapatite (HA) nanorods were separately prepared and used for coating tantalum (Ta) scaffolds with a polymer of polylactide (PLA). We have found that different crystal phases of calcium phosphate coated on Ta scaffolds displayed different effects on the surface morphologies, mineralization and bovine serum albumin (BSA) release. The ACP-PLA and HA-PLA coated on Ta scaffold were more favorable for in vitro mineralization than bare and PLA coated Ta scaffolds, and resulted in a highly hydrophilic surfaces. Meanwhile, the osteoblast-like cells (MG63) showed favorable properties of adhesion and spreading on both ACP-PLA and HA-PLA coated Ta scaffolds. The ACP-PLA and HA-PLA coated Ta scaffolds showed a high biocompatibility and potential applications for in vivo bone defect repair.

Dielectric properties and thermal behavior of electrolytic manganese anode mud in microwave field.

Exploring the dielectric properties of a material can provide guidance for applications of microwave technology to the material. In this work, dielectric properties and thermal behavior of manganese anode mud and pure MnO2, CaSO4 and PbSO4 components were systematically investigated. Results indicated that manganese anode mud showed excellent responsiveness to microwaves, with εr' value of 17.971 (F/M) at room temperature and a maximum value of 20.816 (F/M) at 150 °C, rendering it took only 5.5 min for manganese anode mud to be heated from room temperature to 1000 °C. The dielectric properties of manganese anode mud were related to its thermal behavior, mainly affected by MnO2 component. Moreover, the heating process of manganese anode mud was divided into four stages identified by temperatures: less than 200 °C, 200 °C-700 °C, 700 °C-900 °C, greater than 900 °C, corresponding to the five stages of thermal behavior: the removal of absorption water and combined water, the decomposition reaction of Pb2Mn8O16, and the deoxidation reactions of PbO2, MnO2 and Mn3O4. The work highlights the feasibility of processing manganese anode mud by microwave heating.

High-temperature dielectric properties and pyrolysis reduction characteristics of different biomass-pyrolusite mixtures in microwave field.

Exploring the dielectric properties of mineral-biomass mixtures is fundamental to the coupled application with biomass pyrolysis and microwave technology to mineral reduction. In this work, the microwave dielectric properties of five pyrolusite-biomass mixtures were measured by resonant cavity perturbation technique and the pyrolysis reduction characteristics were systematically investigated, including poplar, pine, ageratina adenophora, rapeseed shell and walnut shell. Results indicated that the dielectric properties commonalities of five mixtures with temperature represented by increasing firstly, dropping intensely and finally rising slightly, with excellent responsiveness to microwaves; which the change trend was mainly attributed to the crystal transformation of amorphous MnO2 and pyrolusite reduction reactions by biomass pyrolysis. Meanwhile, the heating characteristics successfully matched the dielectric properties of the mixtures, and the pyrolusite reduction process by biomass can be divided into two stages: biomass pyrolysis and pyrolusite reduction. The work highlights the universal feasibility of the novel coupled method for mineral reduction.

Microwave pyrolysis of walnut shell for reduction process of low-grade pyrolusite.

Replacing fossil energy by utilizing biomass as carbon source to convert metal oxides has meaning for reduction of minerals. Microwave pyrolysis of walnut shell for reduction process of low-grade pyrolusite was proposed. Thermogravimetric analysis indicated biomass pyrolysis process for reduction of pyrolusite was divided into four phases identified by temperatures: dehydration stage (<150 °C), pre-pyrolysis stage (150 °C-290 °C), curing decomposition stage (290 °C-480 °C) and carbonization stage (>480 °C), and manganese recovery reached 92.01% at 650 °C for 30 min with 18% walnut shell. The strongest preferential orientation of MnO was appeared, with good crystalline structure and no MnO2 and FeO peaks detected. The product surface became loose and porous with numerous cracks, pits and holes, and molten granules were interconnected and stacked with regular shape. The methods propose new idea of selective reduction of pyrolusite based on biomass pyrolysis by microwave heating.

Microwave dielectric properties and thermochemical characteristics of the mixtures of walnut shell and manganese ore.

In this work, dielectric properties and thermochemical characteristics of mixtures of walnut shell and manganese ore were systematically investigated. Results indicated that reducing manganese ore by walnut shell was divided into four stages identified by temperatures: <150 °C, 150 °C-300 °C, 300 °C-480 °C, greater than 480 °C. Higher than 200 °C, the dielectric constants (εr'), dielectric loss factors (εr″) and loss tangent coefficients (tan δ) of mixture at a ore/biomass mixing ratio of 10:1.2 were observed to suddenly drop to low levels, with 5.107 (F/M), 8.5 × 10-4 (F/M), 1.66 × 10-4 (F/M), respectively; which were attributed to the MnO2 reduced by the reductive volatiles produced by biomass pyrolysis. Meanwhile, the volatiles rendered a decrease in density and dielectric properties of the mixture. The work highlights the possibility of reducing manganese ore by walnut shell with microwave heating.